Automatic PR or Reservation Generation for ROH

Hi,
We are subcontract for our customer.Our Cutomer sending material 'A' which is ROH we will do some operation then give it as B (FERT). As per our scenario 'sales order is created against customer PO for material 'A'.We maintain strategy 81.So immediately it will create 'planned order' for A. We also want system to create Reservation/PR against that material.Is any setting is available for this Process?

Hi ,
Once a planned order is generated on receipt of sale order , as per Strategy 81.
You will be converting this planned order to a production order for making the FERT from the ROH 'A' provided by the customer.
It is during the creation of a production order , Reservation/PR will be created depending on the settings you defined in OPL8 -Pur Req tab .
pls try.
Regards,
sheik

Similar Messages

Automatic invoice generation for service contract

Hello,
I want to create the automatic invoicce generation for service contract based on the order.
whenever i raise service contract order system should create the invoice automatically.
could please let me know the settings?

Hi JP Reddy
You can schedule VF04/VF06 for your requirement, such that VF06 will run every 15/30 minutes and will generate billing document for your contracts automatically.
Else go for Z extension development which will assign as output type to your contract and once triggered it will create invoice.
try and revert

Automatic PR for ROH materials

Hi Gurus,
I am facing problem in PR creation for ROH material type by MRP. Details are-
ROH material with MRP type VB and re-order point (say 100) is defined. Lot size EX & minimum lot size is defined.Procurement type is F.
This ROH material is part of Material BOM. Production order created for this material.
When I am doing MRP run by MD02 & even MD01, in result it shows OrdRes but no PR.
MD20 is carried out for ROH material (NETCH & NETPL are maintained)
Pls help.

Hi Anupam/ Suhas
I did changed EX to FX, and I am able to see PR as you can see below(MD04 screen details).
20.05.2010     Stock                                                            0      0
21.05.2010     OrdRes     PP15100                                    5-     5-
22.05.2010     PurRqs     0010000670/00010               150      145
22.05.2010     OrdRes     PP25100                                    1-     144
22.05.2010     OrdRes     PP35100                                    150-     6-
I generated req. of 5, as fixed lot size is 150 a PR of 150 is created. There was one more Prod order of qty.1. I again created prod order of qty 150 in it but in this case no PR got generated, eventhough it is below reorder point.

Send automaticly a report after generation

HI,
how to send a report (the result of tcode MB52 for exemple) automaticly by mail after generation by job.
thx

Hi Anda,
You can take the help of a basis Person, Via T-code SM36, create a variant in MB52, and keep on running the same variant and save it,
create the recipient group for whoom you want to send the, copy the Program name for MB52 (RM07MLBS), and goto SM36, give in the program and recipient list.
then goto SM37, run the Back ground job,
BUt it is not as easy as Explained., But you can always take help from the BASIS guy.
Hope it helps you.
Regards,
YK

Automatic PR to PO conversion for non stock material

Hi,
Can Automatic PR to PO conversion be done for non stock material (with account assignment category and no material master).
We are presently doing only for stock material with transaction ME59N.
Thanks and Regards,
Pratap

Some of the pre-requisites for automatic generation of PO from PR are
1. The system selects only those requisitions for automatic PO generation for which the indicator Automatic purchase order has been set for both the material and the vendor.
2. It can only generate purchase orders from requisitions to which a unique source of supply has already been assigned.
So material master is mandatory if you want to create PO automatically from PR and you need to activate this option both at vendor and material master.

How to reserve material for Internal order

Hi,
How to reserve material for Internal order?
Please reply ASAP.
Thanks & Regards,
Pankaj

Hi Eli,
Thanks for the reply.
I was asking for the integraing of automatic creation of reservation of material.
please revert back if i need to give more details.
Regards,
Pankaj

How to reserve stock for particular customer?

HI all,
How to reserve stock for particular customer when they has approved a particular batch?
Please tell me all the possibles.
Thank you.
Richard

>
Richard.Wang wrote:
> HI all,
>
> How to reserve stock for particular customer when they has approved a particular batch?
> Please tell me all the possibles.
> Thank you.
>
> Richard
Seems like you are talking of reserving material for sales order. In this case, when the ATP check is run, the stock is automatically reserved for the sales order.
Reservation can also take place through MB21, where material is reserved for certain purpose.
If work order is created, it automatically created reservation for the required material.

WRT54GL V 1.1 : how to reserve IP for specific MAC address using DHCP

My !free! made in China router have this functionality. And yet I have been banging my head with this new reasonably expensive wireless router from Linksys. Anyway I lug my notebook around. I need my home router to be able to automatically configure notebook IP address using DHCP. At the same time I need the ip given by home router through DHCP to be the same IP all the time. So "static" ip is not the solution. Alternative "static" ip is also not a solution. Anything with the word "static" in it is not a solution. I know about third party firmware (wrt or tomato) and I know WRT54GL can be flashed with this third party firware. But I'm not going to void my warranty. This will be my last option but not the solution that I seek. I would like to know how to reserve ip for specific mac address using DHCP for WRT54GL V1.1. If this version have no way to make such configuration, I would like to know if there is official firmware upgrade that address this. Thanks in advance!

LDK-Anc wrote:
Tonik - For the life of me, I cannot find DHCP Reservation on the WRT300N. I'm currently configuring one and it would be really useful if I could fine it. Maybe LinkSys calls it something else, but I don't really see anything resembling it. Help!
Maybe these could help. (Images extracted from the User Guide)
Setup tab: Basic Setup
DHCP Reservation
Message Edited by denman_v2 on 03-25-2008 05:11 PM

Error in code generation for deleting table BUT000_TD

Hi,
Did anyone encounter this error while working on EEWB ?
I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
One of the errors, that I got is:
Error in code generation for deleting table BUT000_TD
    Message no. DA464
Diagnosis
    This error message indicates that internal inconsistencies exist.
Procedure
    Please consult SAP.

Hi,
As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
Regards,
Sudheer.

Is it possible to trade in a ipod 4th generation for one of the new ones?

Is it possible to trade in an ipod 4th generation for one of the new ones?

If you purchased it within the last 14 days you can return it for a full refund and then purchase the 5G. Otherwise Apple will only give you a 10% recycling discount if you turn in an old iPod and purchase a new one.

請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2

NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版，不適用。
找了許久都沒看到有1.1.2。

舊的正版軟體不會放在網站上，請洽業務部

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

I just got an iPod touch 4th generation for my daughter. I already have a iPhone 5 setup with iTunes. All I want to put on her iPod is music and apps. How do I set the iPod to only get that information using my iTunes?

I just got a new iPod Touch 4th generation for my daughter. I have a iPhone 5 that is already set up on iTunes. The only thing I want on her iPod from my iTunes is music and apps. How do I set her iPod up so that it only gets that information? Do I set it up as a new device? If so will that alter my iTunes?
Thanks.
llfit

You can set up more than one device on your computer, and iTunes will remember the settings for each of them:
How to use multiple iPods, iPads, or iPhones with one computer
But you'll have to use your Apple ID to sync bought media to her device. Disable all other things you don't want to sync like photos, contacts, etc.

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

That is about normal. You can maximize battery life by changing some settings. See:
Apple - Batteries - iPod
Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
iPod Touch Repair – iFixit

Automatic PR or Reservation Generation for ROH

Similar Messages

Maybe you are looking for