Automatic PR to PO - 2 POs for 2 PRs based on Shipping Instruction

Hi,
I have maintained 2 different shipping instruction for 2 different materials in the contract and the PRs are generated through MRP for these materials.
Now I need to convert these PRs to POs automatically, the result should be 2 POs should be generated for 2 PRs which have different shipping instruction and the condition is we should not select the checkbox for "PO per PR/PR Item".
The system is currently creating only one PO. Please let me know what is the setting that can be missing in this scenario??
Regards,
Ankit Patodi
Edited by: Ankit Patodi on Oct 8, 2010 9:08 AM

Hi,
Shipping instruction is nota criterion for splitting.
refer to the thread User Exit for ME59N
which has similar scenario if not exact.
You need to go for some development.
hope this helps.

Similar Messages

Automatic PO creation - only for PRs based on catalog SRM/EBP items

Dear Experts,
i am facing the following question w.r.t. automatic PO creation:
Is it possible to have automatic PO creation in R/3 only for those purchase requisition items, that are based on shopping cart/EBP/SRM items that are from a third party punch out catalog?
The idea is, that the requisitioner on the SRM EBP side shops in a catalog. Once the the SC is approved and the purchase requisition is created in the R/3 system, automatically a PO should be created based on that PReq. This would save the time for the buyer, who do not need to pay attention to this document, because the purchase from the catalog guarantees the buyer, that the already pre-agreed conditions are getting applied.
But PReqs that are based on Free Text shopping cart EBP items must not be taken into account for the automatic PO creation.
Is there a way to distinguish between the catalog-based and the non-catalog based PReq positions?
Thank you.

Auto PO transaction ME59N comes with huge selection crieteria. If you can distinguish between catelog vs non catalog requisition then it very easy to set up variant to filter non catalog based requistion. you can also think about ehnacement of polulating text fields like Requisitioner or Requirement tracking number with unque idetifier in case of non catalog based PR then you can set variant to filter out those requistions..

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Does anyone use Framwork POs for WBS and Asset management.

We have had issues before with trying to use Framework POs for Assets. I wanted to know, does anyone out there use the Framework PO for the creation of Assets with charges going to WBS elements? Do you track service charges as well as material charges that are purchsed for Assets?

For PO, WBS, Asset frame work below is the sample
Create WBS which manage AUC
Example you will create a clinic,
Create Project - [Project Clinic]
Create WBS under the Project Clinic - [Clinic Expense]
Create AUC under WBS Clinic Expense - [Clinic under Construction]
Let say you purchase Paint for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 1000 USD)
Let say you purchase Wood for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 2000 USD)
During month end you can settle the amount to AUC (tcocde CJ88 - Settlement type - Automatic)
All charges to WBS will go to AUC
Once construction of clinic is finished and is ready to use, you need to settle all the amount from WBS to AUC (through settlement)
Then create Fixed Asset [Clinic Building]
Then settele the AUC [Clinic under Construction] charges to Fixed Asset [Clinic Building] through CJ88 settlement type - Final settlement
Thanks!
Jhero

Users are not able to create POs from PRs having Production Order (F)

Hi Gurus
Users are not able to create POs from PRs having Production Order (F) as creation indicator.
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type F.
Would you please investigate and advise what OSS notes are required to be able to use item category L (subcontracting) on a PO for a requisition generated from a network activity via Procurement Type = "Preliminary requisition for WBS element".
Thanks,
Sada.

Hi Ajay & Andra
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type Production order (F).
Our Business requirement as shown below.
1).The problem - we currently have no way to "direct requisition" an item to be procured via subcontracting - only itu2019s possible via MRP.
2).These behaviors are inconsistent as the requisition process should not impact the procurement process. Can we find a way to influence the creation indicator on the requisition so that it does not appear as a production order?
Please suggest any alternate method for achieving this.
Thanks & Regards
Sada

Open POs for per SOs

Hi All,
How can we open POs for per SOs?
We want open 1 PO concerning all the items in 1 SO..
So we will try to pack POs seperately for 1 customer.
Thanks
Regards
Siva

Siva,
Please remember that a single PO is procured from only one vendor. It is a rare event when all items in a single SO can be procured from one vendor, and would thereby qualify for inclusion in a single PO..
You may manually create POs with as many items as you wish. Once you have determined the materials/qtys you wish to purchase to support a particular SO, just manually enter them all into a single PO.
Best Regards,
DB49

MacBook Pro won't automatically connect to my Time Capsule for WiFi

My 2012 MacBook Pro (non-retina) won't automatically connect to my Time Capsule for WiFi. I had issues with my Comcast router before, and i reset my time capusle a few times, is that th reason why now everytime i wake my macbook up it dosent automtically connect?

Yes.. wireless after sleep or reboot is a problem. See the info from Tesserax.
https://discussions.apple.com/community/wireless/airport?view=documents
Unable to connect after sleep .. you will see it in the list.

I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install them

I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install for free? I see that I could go to the apple store and purchase them again but I belibve that since I had already purchased them; I would get a free copy for my Imac. Do I got something confused here? Please help.

Whoever told you that was misinformed or lying. Those applications are sold separately for the iOS platform and the Mac platform.
Go to the Mac App Store to purchase Pages and Numbers for your Mac. They're $20 each. If you are running an older version of Mac OS X that can't use the Mac App Store, you can purchase install media from Apple.

Will my phone automatically go one hour ahead tonight for the time change? Also, if I set my alarm will it go off at the time it's supposed to, or an hour later?

I live in ny and was wondering if tonight with the time change, will my iPhone automatically change the time? Also, if my alarm is set to go off in the morning, will it go off an hour later, or at the time that its supposed to?

On your iPhone, go to Settings > General > Date & Time.
If you have Set Automatically selected, the date and time for your iPhone is set automtically based on the tower your iPhone is connected to with your cell phone carrier.
The date and time will be changed automatically on your iPhone based on your carrier changing the date and time at the tower your iPhone is connected with.
If the date and time is changed automatically on your iPhone, the alarm wiil go off at the selected time for the alarm. If you need to ensure you don't miss waking up at the designated time, I would use a backup alarm that is not based on the date and time being changed by your cell phone carrier.

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

Workflow for PRS/Purchase order release

Dear Gurus,
I want to configure Workflow / or use std workflow for PRS/PO release. Also i want to integrate with lotus notes so that the mails will flow to Lotus mails & approval can be taken through it.
Please provide me Config setting both in customisation or server side if any.
Rgds,
Saurabh

Hi,
Do you use any workflow template? What is the template number?
Regards,
Masa

Disabling Automatic "Safe File" Opening in Safari for Windows

I need 2 know how to *+Disabling Automatic "Safe File+"* Opening in Safari for windows.
In options/general tab i don´t have the option that safari for mac have to disable it!

Those pictures are .jpg images; the downloading is a function of the way they've constructed the links to them on the web site. But no file is being opened. The opening of "safe" files after downloading refers to files that are compressed or executable, and .jpg are not that.
Aside from that, this appears to be a function that has been removed from Safari for Windows, so no files will open after downloading, regardless of whether or not they're "safe".
Mulder

For STO with Doc. Type UB, shipping instruction not picking automatically..

Dear All,
For STO with Doc. Type UB, shipping instruction not picking automatically.. Please advise.
Regards

Hi
Please verify in the config the below is populated already....
SPRO -> Material Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> define Shipping Data for Plants
Open the Recieving & Shipping plant ID's and maintain their own shipping data and save.
Maintain: Sales Org:
Distr Channel:
Div:
Aside: your shipping plant is already configured with Sh.Point - Tcode: OVL2
Regards
RG

Setting automatically message type MAHN in POs.

Hi,
how can I set automatically the message type in POs so that clicking on "Messages" button
will show message type MAHN ?
Yours faithfully

you can only have MAHN as message type if you run ME91F and your PO fulfills the criteria to be reminded.

Is it possible to Automate configuration of skydrive pro client for a document library

Hi Everyone,
I would like to automate the document library url(configuration) for skydrive pro client programatically.Please let me know if this is possible and how can we do this.
Thanks in advance,
Sailaja Kaladurgi.

It's not possible to automate that. Although you can trigger a standard word-search using JavaScript, you can't do anything with the results - they just appear in the user interface. There's no GREP functionality so you can't search for an extended block of page content, and there's also no way to select or extract a specific region of a page into a new file using scripts.
The only way I could think of doing this would be in InDesign - assuming each question starts with a distinct element that can be GREPped for, you could separate each one onto a new page by running a search/replace that add a page break in front of the element. You can then export all the 'single-question' pages as images, and use PS automation to trim the whitespace.

Automatic PR to PO - 2 POs for 2 PRs based on Shipping Instruction

Similar Messages

Maybe you are looking for