Automatic Print Program
Hi,
Receivables Manager > Setup > Receipts > Receipt Classes
Under Receipt Class and Receipt Method, We have 'Automatic Print Program' field
According to Note 745996.1
Receivables provides one standard receipt print program to format the output of your payment selection and creation programs when you physically create the receipt document.
If you need a different receipt print program format, you must copy this standard receipt print program, and modify it accordingly.
Question:
1. I want to define custom 'Automatic Print Program'. But where to copy this 'Print Receipts Program' as advised above.
The same is NOT available as a concurrent program. But i can see this program in the LOV of that field!
Regards,
Srini
Hi Srini,
Print Receipts Program is not a concurrent program, this is define in format program window.
Navigation:
Receivable Manager --> Setup --> Receipts --> Format Program
Query with Print Receipts Program then copy the Registered Name and go to sysadmin.
Navigate to concurrent program definition window.
Query with ARXAPFRC program shot name then we will find the stranded print program.
Regards,
Raju.
Similar Messages
-
Automatic Payment Program-problems with check printing/viewing
Hello:
I am new to the SAP field. I have been trying to make the automatic payment program work for me. I have been having trouble trying to view the print preview of checks by going to system->own spool requests.
Steps followed ---Automatic Payment Program:
I checked the open invoices -
FBL1N
I ran F110 and finally print out with the start immediately option checked
I checked the open invoices FBL1N again and all the open invoices have cleared
However I am unable to view the checks that should have printed for this payment run. Can anyone please tell me what I am doing wrong here.
Thanks,
MaheshMahesh,
Go to F110, Enter the run date and then click enter - After that click on edit and then proposal and proposal list and you can see all the details - which actually runs the program RFZALI20.
Hope that helps..
Thanks,
Nandita -
Configuration of Check printing in Automatic Payment Program
Hi
I am able to run the automatic payment program. But I am not sure how to configure check lots and check printing. Could any one please help me with step by step instruction regarding the configuration required after running the program.
Thanks
Hariharan GHi
For the program RFFOUS_C give Variant(X).
select maintain Variants button and select continue button.
give program run date , Identification feature , paying company code , sending company code , payment method , House Bank , Account ID , Check Lot NO..
Under Print Control
select Print checks checkbox , give printer name and select print immediately checkbox.
select Print Payment Advice Notes checkbox , give printer name and select print immediately checkbox.
select Print Payment Summary checkbox , give printer name and select print immediately checkbox.
No. of sample printouts (0) and select do not Void any checks checkbox.
select Attributes button and give description and save.select back arrow.
select Printout button and select Start Immediately checkbox.
In the job name for the ? give variant name(X) and enter.
To see the printed checks from the menu select System -
>Services -
>Jobs -
>Job Overview(SM37) and execute.
Also go to SP01 and execute.
we will get the list of spool requests.
Regards
Venkat
Edited by: Venkat Dara on Feb 4, 2009 12:55 PM -
Print Program for Automatic Payment Run, Japan
Hi All,
We are moving from 3.1I system to 4.6C system and need some inputs on the DME file generation in case of Japan company code.
Currently, we are using the print program (RFFOM100) in 3.1 i system which generates the DME file. What should be the corresponding print programs / layouts in 4.6C system for Japan?
Thanks in Advance for your help.
Regards.Hi Ganesh,
If you are going for classic payment medium i think RFFOJP_T will fullfil your needs.
if you going for DME,
i think DME tree type for japan is "WTRE" and tree is "DMEFILE_JAPAN".
check this in t.code "DMEE".
Thanks,
Rudra. -
Payment not clearing for Vendor through Automatic Payment Program
Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
ShaliniI have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM -
Triggering print program for shipment creation
Hi All,
I have created a new print output type 'ZEDF',which should ideally generate a spool at the time of saving the shipment. But unfortunately, this is not happening.Whenever I save a newly created shipment,this output type is not getting triggered,but when I repeat the same output type through VT02,a spool is generated automatically.I have maintained all the condition records properly in the system. Please help me on this.
Thank you,
ArchanaHi,
Have you checked the settings in NACE tcode?
Pls check the same and amde the configuration according to your Device Type.. Pls have a look on below points.
Hi,
1. Goto in NACE
2. You need to ask your functional buddy to let you know about Application area, I suppose u need to take EF.
3. Select EF from the list and than click on Output Types, select any output type (Which you wud like to give to your script)
4. Else if you like to create a new one for your script, then on same screen click on change button, then click on New Entries
And give all the detailed info.
5. To use existing output types, select a output type like "ZEDI", at the left hand side double click on Processing Routines.
6. In the Processing Routines block , Give the Program name as print program and here you need to give your SAP scrip name in Form option.
save it.
Regards,
Lokesh. -
Automatic Payment Program (APP)
Hello Sapients,
Scenario:
A down payment(F-48) is made $25
Later an invoice(MIRO) is posted for $100
Now i wnt to Pay $75 to Vendor
But the Automatic payment program(F110) is not clearing the down payment against the vendor invoice.
Could you please help how to clear the down payment against the vendor invoice in the payment program
Thanks and Regards
SwathiSwathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated. -
Automatic payment program setting
Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj. -
Automatic payment program- Payment list Fields
Dear Experts,
After running automatic payment program when I am trying to view the Payment list(Edit-Payment-Payment list), I donu2019t see the check number in the payment document. Basically we need to see the check number because when the user take the payment list print out it gives the vendor related details with the amount but the authorized signatory need to see the check number as well along with the amount before signing the check.
So is there any setting that I can do to flow the check number in the payment list?
Any inputs are appreciated.
Regards
PaulHi I have found the solution on this.
Solution system is sorting the correspondence bases on vendor name and this setting is done when you set the payment method company code wise.
Also we can sort the payment list vendorwise.
Problem resolved.
Thanks for the input
Regards
Paul -
Automatic payment program how to explain in interviewes
hi friends
asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me my mail id [email protected]The payment program can be broken down into the following steps:
1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
c. What are the payment methods you want to use to pay these vendors
d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
2. Free selection TAB - In this TAB you can restrict the 'open' items you want to select. You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors. If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
Initial status will be 'No Parameters have been entered'
Before you run the program, the status would be 'Parameters have been defined'.
After you run the proposal the status will change to 'Payment proposal has been created'.
After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
Thus the status tells you in what stage of the Payment program you are in.
Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media, or delete the payment proposal.
If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
Hope this helps you in answering your Interview questions.
Good luck.
Kalyan -
Issue with check generation in Automatic Payment Program
Hi experts,
I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
If yes, check the Printer details
Let us know the results
Thanks -
FI-AP - (Automatic Payment Program - Vendors) - Cheque Re-Assignment
Hi Experts,
Can some help me on a real-time issue on FI-AP Accounts Payables - Vendors - Automatic Payment Program - Cheque Re-Assignment Problem - which I am facing.
I have assigned a wrong cheque No. to a payment document through automatic payment program. Actually, this Cheque No. should be assigned to some other payment document.
How, can I release / set free this cheque no. and re-assign it to some other payment document.
I will awards points with an open heart.
Thanks & Regards
Rajeev SharmaHI,
As u r use the automatic payment program - and when u use the automatic payment program the check number are assign in automaticly.
So this are assign when u do the check printing. So once u think the wrong number are printed , u have to void the check number and write manual check and assign to the line item.
FCHE - Voided Checks
FCH5 - Manual Checks : Write manual check
hope this is clear Assign some points.
With regards
Krishna Singareddy -
How to generate checks when executing Automatic Payment Program (F110)
Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!
hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
· Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
· The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
· On certain screens you may have to scroll to view some data entry fields.
· Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
Automatic Payment Transactions: Status
2. As required, complete the following fields:
· Run date
· Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
· Posting date
· Docs entered up to
· Company codes
· Pmt meths
· Next p/date
· Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
· Vendors (from)
· Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
· RFFOAVIS
· RFFOUS_C
12. Click the tab.
Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
List Variant
32. Click .
Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
List Variant (2)
36. Click .
Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
Schedule Print
40. As required, complete/review the following fields:
· Start date
· Start immediately
· Start time
· Target computer
· Job name
41. Click .
42. Return to Step 22.
Accounting clerk
43. Click .
Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
Change Line Items
47. As required, complete/review the following fields:
· Payment block
· Discount amount
· Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
Change Payment
51. As required, complete/review the following fields:
· Payment method
· Pmt meth.supl.
· Due date
52. Click .
53. Return to Step 45.
Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
Delete proposal
60. Click .
Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
List Variant (3)
62. As required, complete the following field:
· Variant
63. Click .
Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
List Variant (4)
67. As required, complete the following field:
· Variant
68. Click .
Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget -
Payment program F110 - how to add second print program in customizing
Hello all,
i would like to add second (another print program after standard sapscript print program customized in table T042Z) print program in transaction F110. This second smartform print program should be customizable and triggered automatically within payment run.
Thanks, zd.Hi,
You can assign two forms in FBZP.
Payment methods per company code
Double click on payment method
In Form Data
You can assign Next Form
Both the forms should get printed when you run F110.
Thanks,
Ravi -
Error while prinitng remittance advices from Automatic payment program
Hello all,
I am trying to print remittance advices from the automatic payment program but I get an error log stating "F0282 - Payment method(s) are not allowed for this program". Has anyone got this kind of error before. I am actually stuck in this error. I have tried changing the variant used for payment run but seem to be stuck up with the same problem.
If anyone has encountered this problem, please suggest resolution.
ThanksHi,
Please check the documentation for program RFFOAVIS_FPAYM which will be used for the payment medium workbench. The following reports are available
Printout files are created per company code and house bank. These can either be printed via the print manager or immediately. Depending on the parameter you select, you can print out one or more of the following:
Payment advice notes (if the information cannot be sent via EDI)
Payment summary
Error log
Regards
Srikanth
Maybe you are looking for
-
Portal runtime error while creating users in portal content administrator
I am getting this error while creating new users in portal. Portal Runtime Error An exception occurred while processing a request for : iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.p
-
APEX doesn't work after install
Hi all, I installed Oracle XE 12c and I try to configure APEX, but I'm not able to finish. I try: SELECT STATUS FROM DBA_REGISTRY WHERE COMP_ID = 'APEX'; Result :VALID SELECT DBMS_XDB.GETHTTPPORT FROM DUAL; Result: 8888 I use SQL developer and I can
-
Below there is a program which updates an OpenOffice file, in fact a zip file. It works fine on window but on Netware I receive an exception java.util.zip.ZipException: invalid entry CRC-32 (expected oxffffffffc0f3d518 but got 0xc0f3d518) Any ideas i
-
File in target directory?
Hi Friends, The audit log says that the message is delivered but i cannot find the file in target directory.Does this indicate that the file is picked by the receiver system,if yes then once the file is picked the file is deleted from the target dire
-
RH7 Environment Files Exchange
I have struggled with the whole confusion of RH7 environment files, and spent a long time trying to work out how the heck to stick pods together in a sensible layout. I now realise that different users will have different ideas about what environmant