Automatic Process Instructions - config trnx O10C
Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.
Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.
Similar Messages
-
Process instructions coming automatically
Dear Gurus
I have assigned process instruction in a master receipe for a particular material.
Suppose there are 4 phasesin the receipe and suppose I have assigned the instructions only in phase 1.
Now while creating the process order for that particular material I am finding that ,the system is picking up a process
instruction for the last phase with no 9999 and asking for values for the chrecteristics to generate the control receipe
(it is also asking for values for the chrecteristics that I have assigned in the first phase which is normal).
Where from the system is picking this process instruction which I didnt assign in master reciepe.
Regards
Sandip SarkarHi,
Check whether Status is PIGN is set in the order?
If yes then those PI categories are comes with control recipe destination (o10c).Check your control recipe destination.Go to Process Instruction to be generayed tab.You will find solution of your query.
Regards,
Dhaval -
Process instruction characteristics and process messages
Hi,
Can anyone tell me why process instruction characteristics is required when only process message characteristics are displayed in PI sheets (input or output).
Regards
JoeHi,
Answer is already there in your question.
and that is
(input or output)
Now you creates the one Process Message characteristic let's it is Temperature.But how it's value comes in the PI Sheet (As Ouput or Input manually by user) that is decided by that Process Instruction Characteristic.
Now when you creates the Process Instruction Category (O12C) except type 0 you have choice of creates it by using help of Process Assistant.This Assistant assigns the Process Instruction Characteristic to the process Massage Characteristic automatically when you select the specific radio button or Activate the check box during that PI category creation.
For Example when you creates the PI category Type 2 using Assistant.Here after naming first screen comes to you is to define type of Process data Request.Here when you select the radio Button for Simple process data request then indirectly you assign the process Instruction characteristic PPPI_DATA_REQUEST_TYPE and its Value comes as Simple.
But when you create the PI category type 0 you have to assign this PI Characteristic manually because its Universal Category and there is no assistant which helps you.
Regards,
Dhaval -
Process instruction sheet configuration
Dear Guru's,
I am exploring SAP PP PI and not much into it,since it has been few months.
I want to know more abt the PI SHEETS, and the way to configure it.
Since my client is not using PI sheets, i want to explore this area and want to know more abt it.
Hence it is a kind reques to you all, to please help me as you all have done earlier and let me know what exactly is PIS sheet and the way to configure it .
Thanks and regards
rahulHai Rahul,
Hope below helps you out.
Logistics --> Production Process --> Process Management --> PI Sheet --> CO58 - Maintain
1)Double Click CO58 & Enter PI sheet No. It can be searched by pressing F4.
2) Maintain the value and note the instructions.
3) Click the NOTE button & maintain the data in the PI sheet
4) Click the REPORT DATA button at the top and open on report data screen
5) select the both operation line & click on REPORT button at the top.
6) The Message appears at the bottom u201CData has been reportedu201D and then save it.
This is steps you can maintain the PI SHEET.
CONFIGURATION STEPS:
1) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> DEFINE & SETUP CONTROL RECIPE DESTINATIONS
2) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> DEFINE SELECTION VARIANTS FOR PI SHEET
3) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> ASSIGN SELECTION VARIANTS FOR PI SHEET
4) SPRO-->PPPI --> PROCESS MANAGEMENT > PROCESS INSTRUCTIONS> DEFINE PI CATEGORIES FOR PI SHEET.
You should foolw these above configuration steps in PI sheet.
You can maintain all datas in PI sheet.
And then follow these
O10C Maintain Control Recipe Destinations
O12C Process Instruction Categories
Then
COR2 Generate After creating the process order release
CO53 Control Recipe Monitor Send the control Recipe
CO58 PI Sheet Maintain Input the values in the control recipe (PI sheet) -
Process Instructions not match
Hi Folks,
when i Display the process instruction in a process order using transaction co3 in operation field foun in the PO menu bar and choose the operation that contain the process instruction,it does not match when i looked the same operation using transaction C203 (Display Control Recipe). can you please enlighten me with this.and what possible solution i can apply tomake them the same.Hello Allan.
The problem may be..
You have assigned a Control recipe destination to the Phase. & In the configuration you might have maintained some process instructions for this destination.
And also in recipe level, you are maintaining some Process Instructions.
So while creating process order there are something going wrong. System is attaching all the process instructions from the configuration & also the instructions attached in the recipe phase.
So plz check the config for this.
Still problem exists plz get back.
Regards
Mahesh -
Process Instruction Characteristics
Hi
Can somebody give me some tips on how the Process instruction characteristics data is populated into the PI sheet.
regards
Kikihi,
follow the insructions-
1. process intructions contents process instruction category.This PI category contents PI characteristics.This PI characteristic contents characteristic values.Ex-If you select INSTR as PI category.It contents characteristic PPPI_INSTRUCTION.
2.Create control recipe destination in O10C.Enter your plant. entet your destination say 01- MIXING DIVISION.
3.select destination type- transfer to abap based PI sheet.
4.select process instructions to be generated.
5.enters at position & sequence-01
6.select -Ex--INSTR/ OR ANYOTHER KEY.
SAVE THE SETTING
select pi category assignment & assign the pi categories. save settings.
create master recipe.assign phase to operation.
select phase raw & double click.
You see the process instruction. assign pi category INSTR. enter the same. you see the characteristic. go to tab value. Here you could assign your process related intructions/ use PI assistant.
Regards,
Devendra -
Process message & Process Instruction Category for PI sheet
Hi All,
where we can assign Process message & Process Instruction Category for PI sheet ?if possible please explain it sequence or steps?Hi,
Process instruction categories can be assigned in master recipe or in Control Recipe Destination in configuration....
In master recipe (C201/C202) :
In Configuration : O10C
Process messages are assigned in Process instructions as shown below...
Thanks
Kumar -
Process Instruction generation - PI Sheet
Fellow Experts,
I've used Process Management with a 3rd party MES application to download Process Instructions (via Cont recipes) in the past. I've gone thru the documents for PI Sheet creation & understand that unlike with a 3rd party Process Control System (where PI's are automatically created & sent), one has to go onto the Master Recipe or the Process Order & enter/define the Process Instructions that are intended to be sent to the Process Control (PI Sheet in this case).
Is my understanding correct?? If yes, is there not a way with which I can invoke the PI creation automatically with the release of the Order ??
CheersHi Andy,
Process management coordinates the exchange of production-relevant data between the ERP system and the independent production level (of an external system).
The production level can be controlled as follows:
Manually: Steps carried out manually by the operator
Automated: Steps carried out automatically by process control system
Partially automated: Steps are carried out both manually and automatic
It depends how we are going do this.
If it is manual, control room person or engineer in the Plant has to feed the values maintained in PI sheet.
If it is automated, the value will come from machine. Like from DCS, PI sheet values will be populated automatically. For this configuration and ABAP coding is needed.
Process instruction types:
Type 0: Universal Process Instruction Category
Type 1: Process Parameters
Type 2: Process Data Requests
Type 3: Process message subscription
Type 4: Process Data Calculation Formulas
Type 5: Inspection Results Requests
Type 6: Dynamic Function Calls
Type 7: Sequence Definition
Type 1,2 and 3 can be used with Process control systems (automated) and all except type 3 can be used with PI sheets (manual)
Control Recipes transfers control data from the process order to process control.
The information contained in a control recipe and the destination to which it is sent are user-defined.
Control recipes can be sent to :
Automated Plants PI-PCS interface by control recipe download.
Manually Controlled Plants Sent to the PI sheet.
For characteristic-based process instructions- ABAP list-based PI sheet or a browser-based PI sheet.
For XSteps, browser-based PI sheets
PI sheets used to exchange data between the partially or completely manually operated production level and the SAP system (PP-PI).
In manually operated production lines, this usually involves a process operator who uses the PI sheet to transfer production-relevant actual data to the SAP system and receives data from the SAP System
Types of PI sheet:
The ABAP list-based PI sheet
The browser-based PI sheet
Hope you got the answer.
Srini -
Error while creating process instruction sheet in COR2
While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
Define variable QTYPRODUCED for default value
Message no. CPOC110
Diagnosis
In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
Procedure
Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
Define Variable
Regards
Kumar1. Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
2. Assign the required variable name to characteristic PPPI_VARIABLE. -
How to print process instruction in process order.
Hi dudes,
,y client is not having Process management interface, but they want to maintain process instruction for phases in recipe and want to take print of process instructions in process order after release process order.
Please explain the path for printing process instructions copied into process order.
if some one assign PIs to phase in recipe, will control recipes be created after release of process order.
Regards
DanielThe easiest way to do what you want is to actually create the PI sheet and then print it off from the view PI sheet transaction (CO60). This is then all standard functionality.
to do this you will need to set the configuration to create the control recipe when the process order is released and send it to a recipe destination.
Regards
Laurence -
Updating a XML document with a processing instruction
Greetings Guru's
I have a fully functional XML database solution for our new system. The only thing left is for me to update a xml document in the database with a processing instruction to find the style sheet (JAXB strips it out when the XML must go back into the database).
I can update complete nodes and node elements in the xml document using updateXML in a regular update statement, but I do not know how to add the following processing instruction to my documents.
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
[pre]
Thanks in advance
DerrickSQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmlText := '<Hello>World</Hello>';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> drop table t
2 /
drop table t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> create table t of xmltype
2 /
Table created.
SQL> set long 10000
SQL> --
SQL> insert into t values (xmltype(:xmltext))
2 /
1 row created.
SQL> select *
2 from t
3 /
SYS_NC_ROWINFO$
<Hello>World</Hello>
SQL> update t set object_value = updateXML
2 (
3 object_value,
4 '/',
5 xmlconcat
6 (
7 xmlpi("xml-stylesheet",'type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"'),
8 object_value
9 )
10 )
11 /
1 row updated.
SQL> select * from t
2 /
SYS_NC_ROWINFO$
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
<Hello>World</Hello>
SQL> -
Process instructions for particular process order.
Hi SAP gurus,
How can I find table level data of process instructions (Like READ 1 , READ2 , INSTR ) maintain for particular process order.
If should not with respect to recipe but it should be respect to process order.
Can any Plz buddy explain me the chain of tables starting from order number?
Best Regards,
Parag SaveHi...
i could not find the table for the relationship u r looking for... but i would suggest the following...
Go to SE16.. press F4 in the table list...go to the application help... their you will find tables for each module... even for PP you will find table specific to process industry... this you can search ur own what can be relevant for ur requirement... finally u can use SAP query to join some table to the get the information u want....
Try this...hopw it should work for u...
Neeraj -
Statistics on automatic processed payments by the electronic bank statement
Hi fellow sap knowledge hungering colleagues.
I have set up the EBS application in my company and it has now run for 4 month with ok success.
I now have to do a follow-up on the project and therefore I'm interested in seeing how many payments have been automatic processed by the EBS application.
I cant seem to find any characteristics on the payment documents that separates the ones that have been automatically processed and those that have been post processed in the FEBA transaction. When each statement is imported you get a sum up on how many pay-ments where automatically processed but is it possible to see overall statistics for all the statements and if not is it possible to recall the statistics for each imported statement?Hi,
the bank normally includes the details provided by the customer in the bank statement.
depending upon the information provided, the user can clear the customer line items. In order to auto clear using EBS, you can use enhancement FEB00001. You can have your logic to auto clear.
also refer the Note 494777 - Customer enhancements in electronic bank statement.
Thanks -
Process Instruction (PI) Sheet text (Browser version)
Our Process Instruction (PI) Sheet information is stored in the text tables (STXH/STXL) under TDOBJECT = 'COPOC' and TDID = '0001', but has a cryptic TDNAME key value. We use the 'browser' PI Sheet display version, not the ABAP base display version which stores the PI data on tables COCHP (Header data) and COFTP (PI Sheet: Process Instructions). Function Module COP0_DISPLAY_PI_SHEET would be used to display the ABAP PI Sheet information. During debug of tcode CO60 (Find PI Sheet), it appears that the Control Recipe (CRID) value is used to create the TDNAME key value via Classes/Methods. Unfortunately, accessing the text thru the different Classes does not seem straight forward. Does anyone have code/logic to extract the PI Sheet text directly using the CRID in a more simpler procedure?
Thank you in advance for your assistance.
jmHi,
use this Function module to get the text.
<b>COCB_CONTROL_RECIPE_GET_DETAIL</b> pass the control recipe ID.
try this also..
COCB_CONTROL_RECIPE_GET_TEXTS
regards
vijay
Message was edited by: Vijay Babu Dudla -
Seeking for API to deal with XML processing instructions
Hi all,
I have a requirement to list all the processing instructions inside a xml document.
E.g. For the document
<?xml version="1.0" encoding="utf-8"?>
<?AAA att1="att 1"?>
<?BBB?>
<?CCC?>
<body>
<empty>True</empty>
</body>
I need to print out PIs AAA, BBB, CCC.
Two solutions i can find are:
1. to treat the doc as a string and do a pattern search for <?*?>.
2. use IF_IXML_DOCUMENT to traverse all the nodes and check their node types against IF_IXML_NODE=>CO_NODE_PI_PARSED and TYPE = IF_IXML_NODE=>CO_NODE_PI_UNPARSED.
However, I am wondering if there's any xml API to deal with XML PIs.
During my research on this, i got IF_IXML_DOCUMENT. It provides two creation APIs for XML PI: CREATE_PI_PARSED and CREATE_PI_UNPARSED. However, there is no corresponding getter API found.
Does anybody know if there is such one?
Thanks in advance.Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML
Maybe you are looking for
-
IWeb 3.04 with OS 10.8.2 on new iMac. Issues with saving.
Sometimes changes save, sometimes they don't. Using Domain Cracker to open desired domain.sites2 files saved in the documents folder. Could that script be the source of the problem? Back story is that we have a fairly large site developed on iWeb 1.
-
Textarea as html body in email
Hi there, I am trying to send an email within Apex (4.1.1.00.23) by putting the content of a textarea (within a form) as html body. However, the carriage returns and blanks are automatically erased and thus a text like this: This is a Test!looks in t
-
T400 Windows 7 or Vista Clean Install - Can't Detect Hard Drive
I've attempted to install Windows Vista x64 and Windows 7 x64 using retail copies of both OS's on my T400. Neither OS can find the hard drive during the install process. I've downloaded every driver possible from Lenovo and loaded them via USB during
-
Send serial from LabVIEW to 8051 mc
Actually wat i need is. My project is online temperature control. I'm receiving my dac value tat means temperature from rtd is getting in LabVIEW using 8051 board. But now I need feedback error voltage to send mc from LabVIEW. Tat means if my conditi
-
What are the main events that are used in an alvreport?
hi experts can u help me for this