Automatic quality Notification during defect recording

Hi Guru's
We have two plants , Plant A will be using the default Notification - F1 , F2 & F3 , plant B will use Cust. Y1 , Y2 & Y3 ,
In t-code QF11 When activating notification type , system is picking the defaults ,
My client requirement is that Notification type should match up to the inspection lot origin. For Ex
Inspection Type 01 (GR for PO) >> Inspection Lot Origin - 01 (Goods Receipt ) >> Notification Type Default Setting (F2) >> Notification type Dropdown Options ( F1 , F2 & G0)
Please tell how the dropdown option for Notification Type can be maintained in QF11 during activation screen
Regards
cybrat24

What I know is that you can not set the notification type in customization for inspection type depending upon the "Plant"
First thing when you copy the notification from original F1 or F2 then system will show that in f4 option in customization.
Second thing if you wish to have notification plant specific,then there can be one solution.
Copy inspection type 01 say Z01.
Assign customized notification type( copy of F1 or F2) to this inspection type.
Activate only this inspection type in other plant.
So for first plat default notification will be SAP default & for second plant it will be always say Y1 or Y2 etc.
I hope this is possible !!

Similar Messages

Deactivate Quality Notification During Defect Recording

Hi,
How will I deactivate the Quality Notification Tabs during Defect Recording? Because it is showing a red traffic light which user dont want to see and mis understood that there is something wrong.
Thank you,
Raymond

Hi
What you can do is remove the creation of automatic notification in the background.
QCC3->inspection lot creation>Maintain Inspection type->select inspec type--->remove defualt " notification type".
This will neither create notification nor give pop-up.
Sujit

Automatic quality notification

Hi
I configure for automatic quality notification
It is working good - if any one of MIC is out of spec. - qn notification created for that mic- on line item created in QN notification -( for normal inspection )
if it is free inspection point - any one of MIC is off spec -- QN notification created - but wired thing is there are 2line item in quality notification ( both lines are associated with same MIC)
even if I accepted the inspection point during valuation -- 2defect line is created
I guess SAP is creating 2 item lines in defect record 9one for mic and another for insp.point identifier)
please correct me if I am wrong
another wired thing is if i create another inspection point for same phase - off spec --> it is creating another 2 item line in defect & QN notification but the previous one item automatically deleted?
is it std? or some thing wrong
Can you plz guide me. this is only for inspection points but fro normal inspection one mic failure one defect line item.
Thanks
Sami

Hi Gajesh,
We are using Free inspection point (that is our requirement)
2 line item get created in item overview of qn notification (2 line item created for defect record -QF02) even for one MIC was out of specification. in this case only one defect record/ on item should be created
but it is not ?
when I tested the same for normal inspection - it is creating 1 defect item in item overview of QN and also .defect record.(but 100 free inspection -SAP behave differenty)
if my second inspection point identification has any one of MIC out of spec - the second line item deleted from item overview of notification (not over write becasue initally item no 1,2 after this 1,3 means item 2 deleted)
is this std behaviour of free nspection point?
or we can restrict?
I didn't tested for 150 becuse we are not inspected based on time /qty -- we are testing any time any qty produced -- this is our requiremnt
Can you please throw some lights??????
Thanks
sami

Stock Posting during Defects recording

Dear experts,
can any one help me for the below scenario,
1. During Defects recording the rejected stock should post automatically to the respective stolrage location.
thanks in advance
muthamil

Hi,
Thanks for your response , my client requirement is as follows,
1. Can we have Automatic posting of Accepted stock / Rejected stock after entering the Defects in Defects Recording? (to avoid wrong entry of stock posting)
2. " Results were recorded wrongly and UD given and stock posting done. Is there any procedure to rewrite the Results?
Is there any solution for the above scenario
Thanks
GM

Automatic POP screen for Defect Recording

Hi,
I am working at Result recording, my client want to record the defect at time of result recording with help of Automatic POP screen of defect overview. I did not find the assignment for automatic POP screen for Defect,
Pl helps me for finding that solution

Hi,
You can get the automatic POP screen for Defect Recording after you Reject the characteristics in the result recording. For that you need to flag the Defect recording check box in the control indicators of the inspection characteristics.
If you are using the task list then select the inspection characteristics and then click on the control indicators. Flag (check) the Defect recording check box in the tab results confirmation.
If you are using the master inspection characteristics the click on the control indicators and flag (check) the Defect recording check box in the tab results confirmation.
By this way you can get the pop up. You can also get the automatic defect codes assigned to your result recording after rejecting. For that you need to assign the defect code in the catalogs of your inspection characteristics or master inspection characteristics.
Please give points if found useful.
Regards,
Manoj

Multiple 'F3' Quality Notifications for defects from single Service Order

Those of you working w/ the QM module no doubt know that if a failure is recorded against an inspection characteristic linked to a Production Order (Order category 10), that SAP standard functionality creates a Defect document (Quality Notification type 'F3'). Any subsequent failures recorded that are linked to that same Production Order (as well as the material & serial number) are recorded, as additional line item defectes, on that same 'F3' Quality Notification.
HOWEVER, I have found when failures are recorded against inspection characteristics for a Maintenance Order (Order Category 30), a new Defect document (Quality Notification type 'F3') is created for each failure that is recorded. Why is this?
My client wants only a single 'F3' Quality Notification to be created for any and all failures that are recorded against a single Maintenance Order. I do not see any way to accomplish this w/o a core mod. Understanding WHY SAP treats these two order categories differently will go a long way to assisting me in designing an adequate solution.
Thanks for your help.

A couple more pieces of information....
1. We are currently running SAP Enterprise (4.7).
2. If I go to SPRO -> 'Quality Management' -> 'Inspection Lot Creation' -> 'Maintain Inspection Types', and display the details for Inspection Type 14 (which we use for Service Orders) the check box for 'One Q-notification per insp. lot' is active. Clearly the system is not processing a single Quality Notification per inspection lot on service orders.
Your assistance is greatly appreciated. Happy New Year

Enhancement to automate Quality notification after stock transfer posted.

Hi PP Gurus,
Here we need to create Quality Notification (type Q2 and Q3) only when Stock of material is moved to Blocked stock through movement type 344. If the material/batch is against vendor it should open Quality notification type Q2 and if it is against Production order it should open Quality Notification type Q3.
If anybody worked on such requirement please help.
Thanks & Regards,
Abu Arbab

Hi,
The development is done using MB_DOCUMENT_BADI (which will be triggered once document is posted against movement type 344), which eventually trigger FM IQS0_CREATE_VIQMEL.
Best Regards,
Abu Arbab
Edited by: abu arbaba on Mar 20, 2009 4:06 PM

Lumia 900 Bug: Notification during video recording...

I just came across this one tonight and can duplicate almost every time.
Make sure Vibrate is on
Record a video
Send phone a email from another device (while still recording)
Phone will vibrate twice. Keep recording for 10 more seconds (padding)
Playback video
This is on my second Lumia 900, that had a purple tint, but a quieter vibrate than my previous phone.
Here is a link that shows the issue: http://youtu.be/h0maLtnUvoU
Can anyone else reproduce this?

Hi all,
Thanks you for your feedback. We have escalated this to the the technical experts to be looked into.
On a general note please be aware that these forums are a user to user platform and not a 'direct to Nokia' support forum. If you want to bring something up with or have direct support from Nokia Care please contact them through mail phone or chat (where available) through this link.
While we, as moderators we will (and have) escalated issues like this and we will inform you of any information we get and can share in the forum it is still a user to user support forum.
Please refer to the forum guidelines which state;
This is mainly a peer-to-peer support forum, and Nokia does not provide direct customer support to all questions via these boards. If you wish to get personal assistance from Nokia customer support by phone or email, please visit the "Contact Us" section of your local Nokia website
Thanks for understanding,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Automatic Creation of Quality Notification

Dear All,
In standard SAP whenever defects recording is done for an inspection lot and saved,automatically a quality notification is also created.In my business scenario they will record defects for almost all the inspection lots hence resulting in a huge number of unwanted quality notification which then later wont be processed at all.
Hence i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
Expecting your valuable comments
Regards
JR

Hi
i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
1.This is very much possible through SPRO setting.
QCC0>Quality planning>catalogs>select defect calss->
like for Minor defect-->remove Raido button & make it No active function
Just a suggetion ...what you can do for all Critical & major type of defect keep "Active Notification"
for Minor type of defects keep "No Act fuction"
this will reduce unnecessory notification.
2.If you permanently want to remove all notification after defect recording then
Go to Inspection type setting in SPRO & remove notification against inspection type.
QCC0>Qul insp>Insp lot creation-->maintain inspec type.
Regards
Sujit

Creation of Quality notification

Hi,
I need to create quality notification using BAPI_QUALNOT_CREATE.
I have to create cause text too for the notification.
Can someone guide me to fill the necessary data for header and text.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 7, 2011 4:37 PM

Hi
i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
1.This is very much possible through SPRO setting.
QCC0>Quality planning>catalogs>select defect calss->
like for Minor defect-->remove Raido button & make it No active function
Just a suggetion ...what you can do for all Critical & major type of defect keep "Active Notification"
for Minor type of defects keep "No Act fuction"
this will reduce unnecessory notification.
2.If you permanently want to remove all notification after defect recording then
Go to Inspection type setting in SPRO & remove notification against inspection type.
QCC0>Qul insp>Insp lot creation-->maintain inspec type.
Regards
Sujit

Defects Recording in QE11

Hi
Can anyone sugggest me bapi for recording defects after the results recording in QE11. I am using BAPI_INSPOPER_RECORDRESULTS for results recording but there is no option for defects recording in that bapi.
can anyone suggest me an appropriate bapi for the same.
Thanks & Regards
Manoj

Dear JJ
The defect recording tick in the mic is for automatic defect recording. What this means is if an inspection characteristic is rejected during results recording, the function for recording defects for a characteristic is automatically called up. Defects recording in the background is done if you define defect codes in the inspection characteristic.You can specify three defect codes for a quantitative characteristic:A defect code for a general rejection,A defect code for a rejection at an upper specification limit,A defect code for a rejection at a lower specification limit
If you do not need this functioanlity remove the tick from MIC. You can anyway o defect recording without this tick also
Hope this helps
Regards
Gajesh

Defects Recording in MIC

Hello
When we set this indicator , i am getting a warning message in QS21 / QP01. I already assigned the code 9 to the relevant plant .
But the warning message was suppressed if i assign any one of the code from code 9 in MIC or Inspection plan .
What was the concept behind it ?
I want to use the code in the defects recording only
Thanks
JJ

Dear JJ
The defect recording tick in the mic is for automatic defect recording. What this means is if an inspection characteristic is rejected during results recording, the function for recording defects for a characteristic is automatically called up. Defects recording in the background is done if you define defect codes in the inspection characteristic.You can specify three defect codes for a quantitative characteristic:A defect code for a general rejection,A defect code for a rejection at an upper specification limit,A defect code for a rejection at a lower specification limit
If you do not need this functioanlity remove the tick from MIC. You can anyway o defect recording without this tick also
Hope this helps
Regards
Gajesh

Completing quality notifications in bulk

Hi Guys
I need to change the system status of quality notifications (+/-500 000 records) to:
NOCO and
DLFL
We’re using SAP ECC6 EHP6. Please guide me to a standard SAP tcode/program that can be used for bulk/mass system status changes (QM10 will require manual actions and is therefore not suitable).
Notification origin = Q3
Notification category = 02
Best regards
W

Hello,
Yes same i was told you that in PM/CS such facility is available bcoz notification is linked with costing object like order and those needs to closed before month end for settlement. But in QM there is no such criticality and that's why SAP not provides mass closure.
Yes u cane use LSMW, eCatt and BDC like functionality for this in QM.
Regards

Turn off the vibration or message notification automatically during video recording.

Please add on mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always reocrd into the video.

You could set your phone to silent http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490 It's not ideal but it does the trick. I agree with you, I wish we had an option that if an app/game it's on immersive mode, like while using the camera, we had an option to deactivate the notifications popping and/or the notifications without having to set the phone to silent.

Duplication of Defect items when using the Automatic Defect recording

Can someone help with this one:
We are using the Defect Code for General rejection field (QPMK-CODEGRQUAL) in some Qualitative characteristics.
When we record a rejected result for these characteristics, the system creates a Quality Notification as expected, but the Notification Item detail tab contains two identical defect items, instead of just one. Both items have the same created_by information and the identical creation time.
I have looked through OSS for any reference to this problem, and cannot find anything, but I'm pretty sure it is a bug.
We are on ECC60.
Thanks for your help!

Hi Chris,
Program RFDM3000 creates dispute cases for residual items arising during automatic incoming payments (account statement, lockbox), during check presentation, or in postprocessing.
Alternatively, you can use the program to create dispute cases for open receivables items. You can use the selection criteria to restrict the quantity of open items (for example, using the document type and posting key for residual items from incoming payment postings).
You will find more information in the link below
http://help.sap.com/saphelp_erp2004/helpdata/en/0b/e07340b0c6980ae10000000a155106/content.htm
Regards,
Jose

Automatic quality Notification during defect recording

Similar Messages

Maybe you are looking for