Automatic recording of changes in SCC4

Hello,
I'm on BI 7.0 SAP_ABA 700-015 (SAPKA70015). The settings on SCC4 are set on customizing, and automatic recording of changes.
Unfortunatly once I create a new infoobject (or other BI object) I do not get a transport request.
Thanks,
Tomer Steinberg.

Most BI objects are considered local when they are created initially due to sometimes complex relationships between objects. SAP supplies the Transport Connection in the Administration Workbench, transaction RSA1, for transporting these objects. Once you have transported them the first time using RSA1, which assigns the object to a transport package, SAP will keep track of changes to the same objects and will then record them in change requests automatically. The online help or help.sap.com provides additional details on the process involved.
Note that this process is not used for client-independent objects such as programs or security roles.

Similar Messages

Automatic recording of changes - transports not created

Hello
I have strange problem with ERP2004 customizing system.
I have 2 clients in the system: customizing and test client.
While customizing work system doesn't show screen with selection of transport request, and some changes are not recorded in transports. What could be the reason? Automatic recording of changes is enabled in customizing client. Sometimes editing client in SCC4 helps - but for a short time.

Hello,
Transport request will be created for all the changes made in customization or workbench changes. Every customization/workbech object may create seprate change request. When you are doing customization for a object, first time you will be prompted for Transport request. After creating new transport request further chnages you will not be asked becuase your changes for the same object and changes will be saved in the same transport. Once you relesed the transport then again when you do any changes you will be prompted for new transport.
Cheers,
-Sunil

Forms obligates me to save every record I change

Hello friends at www.oracle.com ,
I've created a program which main block should insert, update and delete records automatically, using its default Oracle procedures.
Everything works fine, except for one detail: instead of letting me insert/update records and save everything later, my program is imposing me to save every record I insert, update or delete. That is, if I change a record, I simply can't navigate to another record, until I save the record I've changed.
The block has very few columns, and I looked at them to be sure that there is no mandatory field. The program should verify if something is missing in a record only when its data is being saved - that is, in a PRE-INSERT trigger, see if the :BLOCK.field is NULL and, if it's true, then it raises an error. But the program simply doesn't let me go until I save the record I changed.
Please notice that the program is being run via web. Hope my explanation is clear.
Best regards,

Hello Grant,
What I would suggest is create a default block then
compare the code you added (maybe adding a trigger at
a time) to see of your code is causing the problem.
...sincere thanks for your answer. The block was created via Forms Wizard, and the described situation happens anyway - that is, whether I am inserting, updating or deleting a record, I have to save it before continuing to the next record.
I will do some tests, according to what you've suggested, and if I find it out I will post the solution here. I guess it might be a block property that's not correctly set, but other possibilities - such as a PL/SQL block - should be studied as well.
Best regards,

Automatic recording errors

When recording (for example sending an email) captivate also
captures automaticaly screens in the building stage wich are not
not the final screens. So for example when clicking on sending a
new email captivate also captures a screen with a searching button,
just because it has been built in in outlook that first this screen
appears just before you get the screen you asked for.
because of this error you have to delete screens in the
recording.
please advise me on how to resolve this issue

Automatic recording is going to capture those because the
screen is changing, it is what it is designed to do. The only way
around it is to turn off Automatic Recording under Recording
Options and manually capture each screen.
I find it is more efficient to get a few incorrect slides and
just quickly scroll through in Edit mode and delete them before I
begin editing.
Jen

Update info record when changing units of measure in material master

Hello,
is there any possibility for an automatic change of info record when changing conversion factors in the material master ?
We have 3 units of measure in our material master: the base unit and 2 alternative units. The first alternative unit is the order unit and the second alternative unit is the order price unit. So in our purchase info records we maintain an order unit, which differs from the base unit and we also maintain an order price unit, which differs from the base unit and the order unit.
If we now change the conversion factors between the units in the material master, we would like to get an automatic change of the converions in the info record (to order unit and order price unit), which have the same previous conversions.
For IS R it seems to be implemented (see OSS-Note 975954).
Is there any solution for a "normal" industry system ?
Thanks for answering
Edited by: Britta Heinsen on Jul 23, 2009 1:52 PM

I don't think such an auto update is available. Infact I came to know that such an update is available in IS-R after reading your query.
Obviously you an always create a workflow based enhancement that can synchronize the Info-records and material master changes or sort of enhancement which regularly reads the material master change history for such changes and trigger a synchronization by executing change Info-record automatically.

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

How to record the change in build of an assembly for a shipped machine

Hi all
My client manufactures assemblies (configuration items for a model) which consume serialized components.
These components can be replaced by the Field Engineer when they visit the customer site.
My client wants to record the change in configuration of a model because of this transaction.
They have Install Base configured but do not use Depot Repair or Field Service
Is it possible to record the change in configuration of the assembly that has been shipped to a customer?
Do they need to have Depot Repair or some other module for this?
Can this be done using Install Base only?
Please advice.
Regards
Akhil
[email protected]

Hi,
Depot repair is not required, if you want to just track the items. Installbase must be enough. field Service will be to track the SR's if that serves your purpose.
All installbase updates happen through Inventory transactions. So important trggers will be RMA, WIP Issues and Receipts, PO receipts etc.
Depot repair is to properly execute the after sales service when the repair needs to happen in your work shop. If you are fine to manage this part of transactions manually you do not need Depot repair.
regards,

Captivate 4 Automatic Recording does not record application

Windows 7 64bit, Captivate 4.01. Run as Administrator. Create Project>Software Simulation>Record Application - Microsoft Excel 2010. Automatic Recording selected - mode doesn't matter, but Demonstration and Assessment checked. Start recording with red button. All settings default. After lots of moving around, typing, clicking, etc. in window, I can't stop recording using End key - I have to click on the CP icon in the Notification Area icon to stop recording. The resulting project is a single slide without any of the actions recorded. To repeat - I did start Captivate by right clicking on the desktop icon and selecting Run as Administrator.
Anyone resolve this issue? I did try searching the forum before posting, but maybe it isn't IE9 compatible as I got 0 results - even when searcing for "Captivate 4 Windows 7"

Captivate 4 CAN sometimes work fine on Windows 7 64bit systems. It does on mine, but not all users report this success.
Before you go and buy Cp 5.5 you might as well try the different compatibility settings to see if one of them will work for you.
Another thing to be aware of is that Captivate doesn't always capture every single screen event for some programs. So with the project you found resulted in a single slide, were you hearing the camera shutter sound at regular intervals? If not, it may be simply that Captivate wasn't "seeing" the events on screen and you might have needed to do more manual captures to get everything.

How to trigger a workflow when a info record is changed?

Hello All,
I would like to trigger a workflow when the conditions from a info record are changed?
What business object should be used?
Thanks in Advance
Rui

Hi,
for these kinds of issues,
foirst check if a uefull event already exists in the system
for this you first actiave the event trace: SWELS.
Then you change the info record.
And then you read the event log with SWEL.
If there's no event, you may eventually have to create it in an exit with SAP_WAPI_CREATE_EVENT fm
Kind regards, Rob Dielemans

Automatic Publish Site Changes

Is there a way for iWeb '09 to automatically publish site changes everyday at a specified time?

You might be able to create an Automator workflow that would open iWeb and invoke the File ➙ Publish Site Changes menu at a give time each day. Or possibly an Applescript. As in those forums for help.
OT

Recordable Volume Change Control Number?

Does any one know the midi control number that Garageband 09 uses to record volume changes on a software instrument track?
I'm not talking about the standard Midi control number 7 for volume - this only controls the left-right fader in the track header and Garageband does not record volume changes to this fader.
There's a value from 1 to 127 that will record volume changes as a part of the track itself. Does anyone know what that number is? Or does anyone have the table for all the control numbers that Garageband uses, or can anyone provide a link to such a table of such control numbers?
Thanks.

Does any one know the midi control number that Garageband 09 uses to record volume changes on a software instrument track?
I'm not talking about the standard Midi control number 7 for volume - this only controls the left-right fader in the track header and Garageband does not record volume changes to this fader.
There's a value from 1 to 127 that will record volume changes as a part of the track itself. Does anyone know what that number is? Or does anyone have the table for all the control numbers that Garageband uses, or can anyone provide a link to such a table of such control numbers?
Thanks.

How to record entity changes

Hi friends,
I am trying to implement feature which should record entity property changes. Basicaly I want to keep history when and what has changed in a separate table.
For example having a table similar to this and record all changes made to entities
Entity_ID, ENTITY, old_property_value, new_property_value.
Is it an easier way to achieve this using Persistence unit, rather than adding extra logic to each setters?
To better illustrate my problem here is simple example. Assume we have a simple entity class like
@Entity
public class UserEntity implements Serializable {
    private static final long serialVersionUID = 1L;
    @Id
    @GeneratedValue(strategy = GenerationType.AUTO)
    private long id;
    private String fullName;
    public long getId() {
        return id;
    public void setId(long id) {
        this.id = id;
    public void setFullName(String fullName) {
        this.fullName = fullName;
    }Assume we call
myEntity.setFullName("New Name");And persisting changes should add record to separate table
ID ENTITY        OLD_VALUE    NEW_VALUE
1 UserEntity     Old Name    New NameI can simply add extra logic to setter or create a wrapper/controller classes but maybe there is an easier way to achieve this?
I am using glassfish application server.
Thank you for your help!

it depends how "efficient" you want the code to be. with some fairly straightforward JPA-only code, you could write a PostLoad hook method which recorded the current state of the entity in some sort of internal map (using the persistence annotations so that the code was not entity specific). then you could write a PrePersist hook method which takes the original state (as recorded by the PostLoad hook method) and compares it to the current state, and records any changes to your updates table. you could pile all of this into some common base class for all your persistent entities and you would be good to go. like a said, fairly straightforward to code, may not be super efficient at runtime.
probably the most efficient way to do this would be to use some sort of aspect oriented programming/byte code manipulation to automagically annotate all the setter methods to record updates in realtime to an internal updates map. then, a similar PrePersist hook can just use this updates map to record the updates to the appropriate table. again, you can most of this in a common base object type and then manipulate the byte code at some point to insert the setter hooks. a variation on this technique, if you didn't want to go the aspect oriented route, would be to manually insert the setter hook code into every setter method. pain in the butt to maintain, but sticks to builtin JPA functionality.

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps.

Recording of changes in configuration

Hi,
In SolMan, is recording of changes made in the 'Configuration' either through SolMan or directly from ECC 6.0 server possible ? If yes, how ??

Hi Prakhar,
I have got an access to Solution Manager 4.0 server. Now via RFC setting, I am remotely connected to ECC 6.0 server.
I am connected to ECC server (RFC) via solman, now if any change is made/done in configuration/customizing in ECC server, then is it possible to see those changes through Solman ?
I donu2019t want to see these changes through Transport Request.
Is there any alternative method for this?
Thanks & Regards,
Sameer

Hi as iam changing the ical message allert date to daybefore automatically it is changing to on the date please help me, hi as iam changing the ical message allert date to daybefore automatically it is changing to on the date please help me

hi,
As iam changing the ical message allert date to "daybefore" automatically it is changing to "on the date"
please help me,

You could simplify the decode(... into to_char(sysdate + 1,'d')
select sysdate + level input_date,
       TRIM(TO_CHAR(SYSDATE + level,'DAY')) the_day,
       DECODE(TRIM(TO_CHAR(SYSDATE + level,'DAY')),
              'SATURDAY',1,
              'SUNDAY',2,
              'MONDAY',3,
              'TUESDAY',4,
              'WEDNESDAY',5,
              'THURSDAY',6,
              'FRIDAY',7
             ) daynumber,
       to_char(sysdate + level + 1,'d') alternative
from dual
INPUT_DATE
THE_DAY
DAYNUMBER
ALTERNATIVE
10/14/2013
MONDAY
3
3
10/15/2013
TUESDAY
4
4
10/16/2013
WEDNESDAY
5
5
10/17/2013
THURSDAY
6
6
10/18/2013
FRIDAY
7
7
10/19/2013
SATURDAY
1
1
10/20/2013
SUNDAY
2
2
10/21/2013
MONDAY
3
3
10/22/2013
TUESDAY
4
4
10/23/2013
WEDNESDAY
5
5
10/24/2013
THURSDAY
6
6
10/25/2013
FRIDAY
7
7
10/26/2013
SATURDAY
1
1
10/27/2013
SUNDAY
2
2
10/28/2013
MONDAY
3
3
Regards
Etbin

Automatic recording of changes in SCC4

Similar Messages

Maybe you are looking for