Automatic refresh failed error message after upgrading to Server 2012R2

Configuration refresh message: The system cannot access one or more event logs because if insufficient access rights, file corruption, or other reasons. The message suggests I look in the ServerManager-ManagementProvider event log which I did. I find a number
event id 85 messages that state "Failed to query the results of bpa xpath: then there are a number of different entries with different location and the end of every message states "the system cannot find the file specified. The system cannot
find the path specified.
The computer is a stand alone root certificate server that was running 2008R2. I have not had this issue with any other upgraded server though this is the first standalone server I have upgraded.
There are also some Event ID 63 WMI errors in the application log indicating that the account being used to register providers is the LocalSystem account which is a security concern.
I searched the forums but no hits.
Thanks in advanced
[email protected]

Hi,
WMI logs a warning event log message when a WMI provider running in the LocalSystem security hosting context is loaded. This is done to inform system administrators about the risk of elevation of privilege attacks. Such attacks are
possible if the provider code is not properly implemented.
https://technet.microsoft.com/en-us/library/dd315566%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
And for the error Failed to query the results of bpa xpath...
Can you run the BPA scan for the machine? BPA scan can be run using Server Manager console itself.
For this, go to "All Servers" canvas. Scroll below on this canvas to Best Practices Analyzer (BPA) tile. Click on "Tasks --> Start BPA Scan". Select the machine in opened window and complete the scan.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Error message after upgrading to 7.3

i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)

Hi! everyone,
As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
***Message starts here***
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error restart your computer. If this message appears again, follow these step:
Run system diagnostic utility supplied by your hardware manufacturer. In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.
Disable or remove any newly installed hardware or drivers....etc.
Technical information
***STOP: 0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
....................................... ........etc.....
****Message ends here****
As i stated before I've never seen this message before the upgrade. So, here is my configurations:
BEFORE
875P NEO-LSR w/ BIOS v. 2.0
2.53ghz 512 FSB CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb on channel 1 - 512mb on channel 3) (KINGSTON pc2700 module)
CURRENT
857P NEO-LSR w/BIOS v. 2.0
3.2ghz 800 FSB 512mb (L2 cache) CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
* may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU. So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
I will greatly appreciate it if someone in here who may has experienced it before or know what all this means. Please advise

Thanks for your advise bejon2000.
Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week. So, can I just do the BIOS update now with the os already inplaced ??? I assum the aswer is yes, however I just wanted to confirm before I do it, you know
I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
SiSoftware Sandra
Display on Screen
Device Type : Desktop/Notebook
System Summary
Analysing...
Tip 2546 : Large memory modules should be ECC/Parity.
Finished Successfully : Yes
****Mainboard Information
Analysing...
Power / Aux Temperature : 59.0°C / 138.2°F
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Finished Successfully : Yes
***CPU & BIOS Information
Analysing...
Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
Finised Successfully : Yes
APM & ACPI Information
Analysing...
Notice 224 : SMBIOS/DMI information may be inaccurate.
Finished Successfully : Yes
PCI, AGP, CardBus Bus(es) Information
Analysing...
Finished Successfully : Yes
Video System Information
Analysing...
Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
Finished Successfully : Yes
Windows Memory Information
Analysing...
Finished Successfully : Yes
Drives Information
Analysing...
Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Tip 1821 : Removable Drive (H:) : Label (name) drive.
Finished Successfully : Yes
Ports Information
Analysing...
Warning : Communications Port (COM1) : Port in use. [5]
Finished Successfully : Yes
Keyboard Information
Analysing...
Finished Successfully : Yes
Mouse Information
Analysing...
Finished Successfully : Yes
Sound Card Information
Analysing...
Finished Successfully : Yes
Printer and Fax Information
Analysing...
Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
Finished Successfully : Yes
MCI Devices Information
Analysing...
Finished Successfully : Yes
Windows Information
Analysing...
Tip 1300 : Enter your company name or "Home" instead of "Unknown".
Finished Successfully : Yes
WinSock Information
Analysing...
Finished Successfully : Yes
Processes Information
Analysing...
Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
Finished Successfully : Yes
Modules Information
Analysing...
Finished Successfully : Yes
OLE Information
Analysing...
Finished Successfully : Yes
DirectX Information
Analysing...
Finished Successfully : Yes
Network Information
Analysing...
Finished Successfully : Yes
SCSI Information
Analysing...
Warning 2600 : WDC WD80 0JB-00CRA1 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : TOSHIBA DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : PLEXTOR DVDR PX-716A : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Finished Successfully : Yes
Font Information
Analysing...
Finished Successfully : Yes
CMOS Information
Analysing...
Finished Successfully : Yes
OpenGL Video Information
Analysing...
Finished Successfully : Yes
Services Information
Analysing...
Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
Finished Successfully : Yes
ATA/ATAPI Information
Analysing...
Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
Finished Successfully : Yes
Data Sources Information
Analysing...
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
Error : Tables/Views : No tables/views found.
Error : Procedures/Functions : No procedures/functions found.
Finished Successfully : Yes
Hardware IRQ Settings
Analysing...
Finished Successfully : Yes
DMA Settings
Analysing...
Finished Successfully : Yes
I/O Settings
Analysing...
Finished Successfully : Yes
Memory Resources
Analysing...
Finished Successfully : Yes
Plug & Play Enumerator
Analysing...
Finished Successfully : Yes
Performance Tune-up Wizard
Finished Successfully : Yes
There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
******UPDATED*****
here is the last part of the error that i described in my first post, I just saw it again right now
****STOP: 0x.......
**** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
Beginning dump of physical memory
Dumping physical memory to disk: (counting from 1 to 99 then it shut down the computer)

Error messages after upgrading kernel (devfs to udev) [SOL]

when installing the new kernel i got a message to change my menu.lst so it changed "/dev/discs/disc0/part3" to "/dev/hda3" (and nothing else) cause of udev instead of devfs.
after rebooting i get few error messages:
[after network start]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFBRDADDR: No such device
etho0: unknwon interface: No such device

kjs wrote:I'm also having an issue after upgrading neither eth0 nor eth1 are showing up in /dev .... I think it's due to the switch from devfs to udev...
for the record - network interfaces never show up in /dev - they're not normal devices
edit: I guess I should provide some help...
ifconfig and "ifconfig -a" will list network devices (also in /proc/net somewhere). If you do not have a network device that means that your module is not properly loaded for that device.
This should have nothing to do with a devfs/udev switch and everything to do with a kernel upgrade.
Just for some more info, can you please report the output of:
· lsmod
· uname -r
· ls /lib/modules
· ifconfig -a

Caldavd failing to start after upgrade to Server 3.2.1

This problem, caldavd not starting after upgrading to Server 3.2.1, is a variation on the theme of PostgresQL not starting. It too boils down to a postgres database not having been updated properly. Below are the steps needed to fix this problem:
sudo su -
# Change to the directory with the postgres database for the calendars and contacts
cd /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg
# Disable caldavd for now
launchctl unload -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
# move the broken database out of the way and build a new empty one
mv cluster.pg broken-cluster.pg
mkdir cluster.pg && chmod 700 cluster.pg && chown _calendar:_calendar cluster.pg
sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/initdb "/Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg" -E utf8 --lc-ctype=C
# Finish the upgrade job that never completed by explicitly invoking the previous version of postgres:
sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/pg_upgrade -b /Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2 -B /Applications/Server.app/Contents/ServerRoot/usr/bin -d /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg.original_for_upgrade/ -D /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg
# Mark the newly upgraded database as no longer in need of an upgrade
sudo -u _calendar touch cluster.pg/.NoRestoreNeeded
# Start caldavd back up
launchctl load -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
And everything should be the way it should have been in the first place!

Hi, I have the same issue and Linc Davis pointed me to this thread from Re: Server Calendar migration failed.
Your solution already got me somewhere, so thanks for that
I need to note that my machine is on Yosemite (10.10.1) and I'm running Server 4.
The only issue I have is that I get an error message when running pg_upgrade, the log says:
pg_upgrade run on Fri Jan 23 09:31:30 2015
command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
waiting for server to start....LOG: database system was interrupted; last known up at 2013-11-02 12:21:52 CET
LOG: creating missing WAL directory "pg_xlog/archive_status"
LOG: starting archive recovery
LOG: restored log file "000000010000000000000002" from archive
LOG: invalid magic number D075 in log file 0, segment 2, offset 0
LOG: invalid checkpoint record
FATAL: could not locate required checkpoint record
HINT: If you are not restoring from a backup, try removing the file "/Library/Server/Calendar and Contacts/Data/Database.xpg/broken-cluster.pg/backup_label".
LOG: startup process (PID 12315) exited with exit code 1
LOG: aborting startup due to startup process failure
........................................................... stopped waiting
pg_ctl: could not start server
Examine the log output.
The log talks about removing the backup_label file. When I do that the log says the following:
pg_upgrade run on Fri Jan 23 09:41:34 2015
command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
waiting for server to start....LOG: database system was interrupted; last known up at 2013-11-02 12:21:52 CET
LOG: starting archive recovery
LOG: invalid magic number D075 in log file 0, segment 2, offset 0
LOG: invalid primary checkpoint record
LOG: could not open file "pg_xlog/000000010000000000000001" (log file 0, segment 1): No such file or directory
LOG: invalid secondary checkpoint record
PANIC: could not locate a valid checkpoint record
FATAL: the database system is starting up
.LOG: startup process (PID 15068) was terminated by signal 6: Abort trap
LOG: aborting startup due to startup process failure
stopped waiting
pg_ctl: could not start server
Examine the log output.
Thanks already for the help

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

[Solved] xorg server & keyboard conf error messages after upgrade

I ran my daily upgrade (today was big, from FF to the kernel to xorg) and I was not able to login on GDM afterwards.
It's weird. The X server will start, and so will the GDM login screen. But entering the password will result in a GDM crash (I later found out that KDM and SLIM have the same issue; KDM not starting and SLIM refusing the keyboard input). So after starting an alternate console and trying to start x (startx), I have this error message:
"Th e XKEYBOARDMAP keymap compiler (xbcomp) reports:
Error: Cannot close "/tmp/server-0.xkm" properly (not enough space?)
Output file "/tmp/server-0.xkm" removed
Errors from xkbcomp are not fatal to the X server
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices "
I have been fiddling with the keyboard config on xorg.conf but I'm not sure I'm getting anywhere. Also, I downgraded the xorg-server and xkeyboard config packages just to be sure.
Any clue?
Thanks!
Last edited by southerncross (2012-07-24 15:46:38)

Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks!

"iTunes could not back up the iPad because the iPad disconnected" error message after upgrading to 8.3

Yesterday I upgraded my iPad Air from 7.1.2 to 8.3 after holding off upgrading until now. Before the upgrade I backed up the iPad without any problems but since the upgrade I can't back up the iPad – it goes to step 2 of 4 and stays there for ages, and then I get a pop up box saying "iTunes could not back up the iPad "... iPad" because the iPad disconnected."
I've just tried setting up iTunes on another PC and backing up the iPad to this iTunes and got the same error message so it's not the iTunes setup on either computer (Windows 7 PCs).
Everything I've tried so far seems to be working on the iPad but I can't do any backups.
Any suggestions on what else to try will be much appreciated.

Sometimes resetting the iPad system helps. Did you try that? If not, try it. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons and let the iPad start up. Then try to backup again.

Sp43882 error message after upgrade to windows 7

hello,
i've just upgraded to windows 7 32 bit and installed the update sp43882 on my pavilion dv4 1409tu.
the problem now lies during the installation of the update,this error message appear
'' error 1904.module c:\program files\digitalpersona\bin\DPGPOUpdate.dll failed to register. HRESULT=2147024891. Contact your support personnel"
what should i do?
should i abort,retry or ignore the message?

Hi Spikey I dont know if that driver is compatible with 7 and they dont seem to have released one yet here is the link for windows 7 drivers for your computer
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=nz&lang=en&product=3994757&

I am getting a sync failed error message after trying to download my settings.

After upgrading to 2014 version my settings did not migrate. I have maintained my settings by uploading all my current settings recently, but each time I try to download I'm getting a "sync failed" message.

Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

Error message after upgrade

I got the following message when trying to telnet to our switch after upgrading from 3.3(4a) to 3.3(5b) on our MDS 9120 (after supplying my credentials):
telnet login is temporarily not available as startup configuration is being applied.
This was after the switch reloaded after issuing the install all command. Since I couldn't telnet I logged in via the console and noticed there was no startup config but the running config was there and correct. After about 30 minutes with the switch being up everything was back to normal. The startup config was there and I all services were up and running.
Has anyone experienced something like this before with an upgrade? During all my past upgrades after the reload (single supervisor switches) the switch was up and running just fine. Something a new to this upgrade for me is that this switch doesn't have an active mgmt interface, we reach this switch using IPFC (create ip interfaces on vsans that are merged between switches).

Everything is currently set to the defualt levels.
show logging level
Facility        Default Severity        Current Session Severity
aaa                     2                       2
acl                     2                       2
auth                    0                       0
authpriv                3                       3
bootvar                 5                       5
callhome                2                       2
capability              2                       2
cdp                     2                       2
cert_enroll             2                       2
cfs                     3                       3
confcheck               2                       2
cron                    3                       3
daemon                  3                       3
device-alias            3                       3
dstats                  2                       2
ethport                 5                       5
fc-redirect             5                       5
fc-tunnel               5                       5
fc2d                    2                       2
fcc                     2                       2
fcdomain                3                       3
fcns                    2                       2
fcs                     2                       2
fdmi                    2                       2
feature-mgr             2                       2
flogi                   2                       2
fspf                    3                       3
ftp                     3                       3
ipacl                   2                       2
ipconf                  5                       5
ipfc                    2                       2
kern                    6                       6
licmgr                  6                       6
local0                  3                       3
local1                  3                       3
local2                  3                       3
local3                  3                       3
local4                  3                       3
local5                  3                       3
local6                  3                       3
local7                  3                       3
lpr                     3                       3
mail                    3                       3
mcast                   2                       2
module                  5                       5
news                    3                       3
ntp                     2                       2
pfma                    5                       5
platform                5                       5
port                    5                       5
port-resources          5                       5
port_channel            5                       5
prefpath                2                       2
qos                     3                       3
radius                  2                       2
rdl                     2                       2
rib                     2                       2
rlir                    2                       2
rscn                    2                       2
scheduler               5                       5
scsi-target             2                       2
securityd               2                       2
span                    5                       5
syslog                  3                       3
sysmgr                  3                       3
System Health LC        4                       4
SystemHealth            4                       4
tlport                  4                       4
user                    3                       3
uucp                    3                       3
vni                     2                       2
vrrp_cfg                5                       5
vrrp_eng                5                       5
vsan                    2                       2
vshd                    5                       5
wwn                     3                       3
xbar                    5                       5
zone                    2                       2
0(emergencies)          1(alerts)       2(critical)
3(errors)               4(warnings)     5(notifications)
6(information)          7(debugging)

"Database logon failed" error received after upgrading from CR XI to CR 200

We have a bunch of reports that use ttx files and datasets. The code to support this was written and compiled originally using .NET 2.0 and CR XI. After recompiling using .NET 3.5 and CR 2008 (not the version that came with VS2008), when I run the reports, I now receive an error "Database logon failed". after clicking throught he error, I am prompted to enter a username and password. Just for the heck of it, I entered my database userame and password with no luck. I cancelled out of the login dialog and the frae of the report appeared but no report. No code was changed. How do I fix this?
I know that I should convert the reprots to use xml schema files but I have over 300 reports and this will take time. I need to get this fixed ASAP. After I get this running, I can then [leisurely] fix the reports and use xsd files.

Since the reports were create off of ttx files, they would be expecting a recordset at that time. How are you passing the data to the reports with CR 2008 and VS 2008?
Also, see the following:
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
And don't forget to search these forums - a fair amount of info in this topic here. The search box in the top right corner of this web page will also give you a number of blogs, KBases, wikis articles and more. E.g.; the search term "ttx net crystal", brought up the above two KBases (along with a number of other content).
Oh. If this is critical, remember you always have the option of creating a phone case;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Oct 7, 2011 7:04 AM

Error message when upgrading to SCOM 2012R2 CU2

Hi!
I get this message when running the SQL script "update_rollup_mom_db.sql" which is required in the CU2 upgrade. I've tried running it multiple times. The message is attached.
I've also tried stopping all SCOM services on the Management Servers and the Correlation engine, but still the error.
What does this error mean for my SCOM installation? Is there something that doesn't work now? I try to update agents, but the console doesn't show the new versikon number

Hi,
I agree with Mai, this issue is SQL related, and hope the below two similar threads be helpful for you:
Transaction was deadlocked on lock resources with another process
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/94feae08-133e-4d76-a50f-12afb4345d15/transaction-was-deadlocked-on-lock-resources-with-another-process?forum=sqldatabaseengine
OpsMgr/SCOM : Transaction was deadlocked on lock resources with another process and has been chosen as the deadlock victim
http://social.msdn.microsoft.com/Forums/en-US/595796fc-e778-4e2a-afff-3b5ec53fcc1e/opsmgrscom-transaction-was-deadlocked-on-lock-resources-with-another-process-and-has-been-chosen?forum=sqldatabaseengine
Regards,
Yan Li
Regards, Yan Li

KB2992611 "not applicable" error message when installing on server 2012R2

Attempting to patch my 2012r2 servers for the new KB2992611 schannel critical bug, see: https://technet.microsoft.com/library/security/MS14-066. I downloaded the 2012r2 version from here: http://www.microsoft.com/en-us/download/details.aspx?id=44643
and then attempt to install on several 2012r2 servers.
I get a message saying "The update is not applicable to your computer." on every single 2012r2 standard server I have tried. Anyone else seeing this or have any ideas how to resolve? The 2012 version of the patch went on just fine to
a 2012 setup.
Edit: also seeing the same thing when I try to install the appropriate version for my windows 8.1 desktop client.

You probably will need to call it in. Almost all files are marked not applicable. Security / Hotfix support is always free.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Automatic refresh failed error message after upgrading to Server 2012R2

Similar Messages

Maybe you are looking for