Automatic refresh of browser when an incoming call comes in

If you have to take a phone call and you're in the midst of typing information into a web page you lose all of it because when you hang up the call, it goes back to Safari and refreshes the page.
Is there anyway to stop this from happening? I just lost a super long comment I was typing on a blog.
Thanks in advance!

It does this because it needs sufficient memory for everything else. It clears the cache of that site which then makes it need to refresh. No way to disable this.

Similar Messages

IPhone 4 - my phone doesn't "ring"... Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

iPhone 4 - my phone doesn't "ring". Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

Check the position of the mute switch. On the side, just above the volume keys.

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button. why?

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?

Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.

How can I turn off the phone saying "Call from" #/name when getting incoming call.

How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts? I have a LG accolade

I recommend checking your prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature.
With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
-Confirm Choices--- Automatic/Always Confirm/ Never Confirm
-Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
-Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
Prompts ---Mode/ Audio Playback/Timeout
* For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
* For Audio Playback, set Speakerphone or Earpiece.
* For Timeout, set 5 seconds or 10seconds.

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID?

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
Please help meautomate this process.

You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.

Two beeps when an incoming call gets connected

Since a couple of weeks ago I started hearing 2 beeps when an incoming call gets connected.
I can only hear these 2 beeps when I use my headset (original iphone headset) to answer the call. I hear these 2 sounds right after I answer the call and then I can hear the person on the other side of the line.
This does not happen for outgoing calls. The person on the other side of the line can't hear the beeps. I tried this in another iPhone and I couldn't hear the beeps either.
Does anybody knows why?
Please, serious answers (I'm tired of listening about the bighbrother thing)

Hi there,
Did you ever figure out what those beeps are? I'm hearing them too.
Thanks!

Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

Hello ElleMalloy,
Sorry Im Just Responding Phone Has Been Downloading And Charging.
Well I Will Start Here,
I Tried Everything I Even Restarted My Settings Just So I Can See if That Would Work Because Someone Sujested It But What They Neglected To Say That Their Probrolem Was With A Ipad ? Anywho To Keep It Short I Went Online Logged A Complaint With Apple Made A Appointment With A Apple Store In My Area To Take The Phone There After Trying Everything (Resetting, changing setting etc..........) Nothin Worked Upon Taking The Phone To The Store They Swapped Out My Phone For A New One Volume On New Phone Is Perfect And I Only Had To Wait 40 Minutes

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a big photo for an incoming call?? I have installed iOS 7.1.1

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a great big photo for an incoming call?? I have installed ios 7.1.1

Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
http://www.apple.com/feedback/iphone.html

Why does the flash light blink when incoming call comes ?, Why does the flash light blink when incoming call comes ?, Why does the flash light blink when incoming call comes ?

I upgrades the software of my iPhone 4s to 5.1 since then the flash light is blinking when incoming call comes rebooted the ph many times but doesn't help what shall I do ?

Go to Settings>General>Accessibility and turn LED Flash for Alerts to Off.

Is it true that music pauses when a phone call comes in even when the ios6 'do not disturb' feature is activated?

is it true that music pauses when a phone call comes in even when the 'do not disturb' feature is activated?
thanks in advance

You could test it out and let us know!
Best of luck.

HP 4120 Lync Phone Edition - Ringer Volume Level Can Not be controlled when a second call comes in for a workflow

Here is the scenario we are experiencing with our HP 4120 Lync phones running the latest available firmware (4.0.7577.4455)
1) A User has an HP 4120 phone and is a member of a workflow/response group which is setup with attendant routing method.
2) The ringer volume is set to the minimum level by the user
3) When a single call comes in to this user, the ringer volume level works as expected
4) When two calls come in at the same time to this users phone, the ringer volume set by the user is ignored and the ringer plays at Maximum volume.
This is causing disruptions to our office environment as we are unable to reliably control the volume levels of the ringers.
There does not appear to be anything more in the settings/menus of the phones themselves. I am thinking this may be an issue with the firmware, but if anyone else has any suggestions, they would be appreciated.
Thanks!!

Hi,
Did the issue also happen before update to the latest firmware?
Did the issue only happen for Response Group call or also happen for basic calls?
If the issue only happen after updating to the latest firmware, it can be the issue of the firmware.
As there is call delay for Lync IP Phone to be a agent of the Response Group. So you can try to use Lync desktop to instead for better performance.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

HT1338 Imac won't wake from sleep when a facetime call comes in

My Imac will not awake from sleep when a FaceTime call comes in.

I've had this problem several times now, and I do no own MobileMe. I don't use any bluetooth peripherals, but I've noticed that the precursor to the problem is that my bluetooth icon in the menubar goes from normal to "Bluetooth Unavailable." Then at some point later on, I put the iMac to sleep and it won't wake up.
I've read elsewhere that the bluetooth unavailable problem may be connected to the power management unit, which may in turn explain what is going on with it not rebooting. But I'm not sure.

Agent Desktop Error When receive Incoming Call

Hi, I have CAD Ver 8.5.1.39 | CUCM Ver 8.5.1.10000-26 | UCCX Ver 8.5.1.10000-37 running on my network now.
there some problem occurs when I put an Agent into the Line Group with Top Down Distribution call(actualy all the Distribution call type face the same problem).
1. When the Agent Receive Incoming Call from outside(PSTN) sometimes the CAD don't Show Up and show no response but the CIPC work normaly. showed in Not Responded.jpg
2. When the Agent Receive Call and it is show up. I can't answer the call. When I press ctrl-A or i push the answer icon i got the error message show in error.jpg , sometimes when i want to make a call the same problem happens
3. When the Agent Pop Up and the caller end the Call before I can answer. The call got stuck in Agent and Agent cannot make a call. Agent must logout and login again to fix this problem, show on the stuck.jpg
4. When the problem 3 occurs and if the Agent don't fix this problem, the stack got more caller. show in stuck2.jpg
I dont know why this happen, all the call come from outside(PSTN). when I test call from internal the problem doesn't occur.
Please help me. Any help will be helpful
Thank you for your help and participation
Regards,
Yopie.

Hi,
I have an auto attendant, for example like this:
Welcome to the XYZ Company,
Press 1 for purchasing (10 Agent)
Press 2 for Consult (5 Agent)
Or press 0 for operator help (3 Agent)
When the consumer press 1, I want the call distribute to 10 Agent in the Purchasing team.
To make scenario like this I use the hunt pilot and to use hunt pilot i must have line group first.
So I need to put the 10 Agent into the Line Group.
Thanks.

Contact picture does not appear when receiving incoming call

I have attached pictures on my iPhone contacts but when i receive an incoming call the picture does not appear. Any ideas how to resolve.

I am expriencing the same issue with my iPhone 4S, were you able to resolve the problem?

Automatic refresh of browser when an incoming call comes in

Similar Messages

Maybe you are looking for