Automatic Remittances Creation Program (SRS) fails with ARZCAR: Error from main.
Gurus:
We have this request that fails - but only at 4am (other scheduled runs it completes fine)
The error is
ARZCAR: Error from main.
Any ideas much apperciated!!
11.2.0.3
11.5.10.2
RHEL 5
+---------------------------------------------------------------------------+
Receivables: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARZCAR_REMIT_SRS module: Automatic Remittances Creation Program (SRS)
+---------------------------------------------------------------------------+
Current system time is 11-NOV-2013 04:00:24
+---------------------------------------------------------------------------+
BATCH Date : 2013/11/10 00:00:00
Convert date parm
prepay_flag: <N>
Exception Code <1>
Batch ID: <>
main: Error from Batch Id Generation.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
04:00:24 :Auto Remittance Batch Generation
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Successfully resubmitted concurrent program ARZCAR_REMIT_SRS with request ID 19366567 to start at 12-NOV-2013 04:00:00 (ROUTINE=AFPSRS)
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
ARZCAR: Error from main.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 11-NOV-2013 04:00:24
+---------------------------------------------------------------------------+
Similar Messages
-
SSIS 2012 package runs under SSDT but fails with permission error from SSMS
I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
Hi everyone,
We are trying to create silent(unattended) install package to install Oracle database 11g express edition 11.2.0 silently on our machines. We modified the provided .iss file as per the requirement and tried to install with below command,
setup.exe /verbose /s /f1"c:\DISK1\response\oracleXE-install.iss" /f2"c:\DISK1\oracle_log.txt" /v" /l*v "c:\DISK1\oracle_msi_log.txt""
Installation is failing with below error from the log file,
1: OracleXE-Server-Install-Message: Port 8081 is in use. Specify a different port number.
Installshield 11:22:22: Installation aborts, ready to shut down.
Port 8081 is being used by mcAfee in our organization. We tried passing a different port number for Http in the response file(.iss), but it is failing with same reason. We have searched foruns and found that we need to stop the port8081 during the oracle XE installation and can start it later once the installation is completed. But As port 8081 is being used by McAfee in our organization, we could not stop it even during oracle XE installation as it creates security issues.
I am attaching the MSI log(failure log) and modified .iss(modfied .iss file to .iss.txt to be able to attach) files. Please look into it and suggest how can we achieve silent installation in this case.Pl see previous discussions about this topic - seems to be a limitation of the silent install process
OracleXE-Server-Install-Message: The 8081 port is in use. -
What is an easy web-page creation program for use with MacBook Pro?
Can anyone suggest an easy web-page creation program for use with MacBook Pro? I have used FrontPage with my PC, but am changing to a MacBook Pro.
It largely depends on your skill level. Do you want to write web page code, or do you want to just design something and have it turn into a web page automatically?
If you are more of a designer, try these:
RapidWeaver
Freeway Pro
Muse
If you want to write web page code, try these:
Coda
BBEdit
Dreamweaver
If you really don't want to write the code and want the best experience for your viewers, and you want to spend the least amount of time on it, my recommendation is:
No program at all.
Instead, sign up with a web site company like:
WordPress.com (hosted by them) or WordPress.org (hosted on your server)
Squarespace
Wix
The reason is that these companies have fully operational, nicely designed web site templates that you just fill in with your words and pictures, and they are ready to go. They also give you these benefits:
Already designed to the latest web standards
Already designed to resist hackers
Already designed to work on all browsers
Already designed to automatically adjust the page for readability on desktop, laptop, tablet, and smartphone screen sizes
Already designed for accessibility
Already designed for Search Engine Optimization so that your page will be found on Google
Already designed with social media links built in if you want
It is not like the old days where you build a site in Front Page and you assume it will only be seen on a desktop computer. If you build it yourself with a web page program, do you have the knowledge to make a site that works on all of the different web browsers and mobile devices, and is friendly to search engines and social media? If you don't have those skills, working with a website company can be a lot better, faster, and more reliable than trying to hammer all of that out yourself using code in some app. -
When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error -
Differences between Automatic Receipts Creation Program and Master Program
This is something I observed today - I'm hoping someone can explain it to me.
If I go through the Receipt Batches form and create a new batch for Automatic Receipts, this calls the Automatic Receipts Creation Program and my batch gets created successfully.
If I launch the concurrent request Automatic Receipts Master Program, no receipts are created. But there are invoices in the system eligible for receipting.
I'm trying to understand what the Automatic Receipts Master Program does differently? What does it do in general?This is something I observed today - I'm hoping someone can explain it to me.
If I go through the Receipt Batches form and create a new batch for Automatic Receipts, this calls the Automatic Receipts Creation Program and my batch gets created successfully.
If I launch the concurrent request Automatic Receipts Master Program, no receipts are created. But there are invoices in the system eligible for receipting.
I'm trying to understand what the Automatic Receipts Master Program does differently? What does it do in general? -
ORA-06540,following statement failed with ORACLE error 6540:
I was working during the last days on doing a full export/import for the database 9i I used the following script for the export .
exp system/**** full=y file=/export/export.dmp log=/export/export.log consistent=y statistics=estimate buffer=200000
And everything went fine, after that I dropped all the objects owners belonging to the tablepaces as i am doing that to solve fragmentation problems
The issue is during the import and after 50% of the tables were exported successfully I started to receive the following error
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020E'; SREC.MAXVA"
"L := 'C26338'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(113,9855); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC :="
" 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"GL_ACCOUNT_ID"', NULL"
" ,NULL,NULL,1432,.000698324022346369,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020B'; SREC.MAXVA"
"L := 'C2031F'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(110,230); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := "
"2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"COMMON_COA_ID"', NULL "
",NULL,NULL,14,.0714285714285714,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C202'; SREC.MAXVAL "
":= 'C20233'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS"
".NUMARRAY(100,150); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2;"
" DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"CONSOLIDATION_CD"', NULL"
" ,NULL,NULL,2,.5,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
the used script for import is
imp system/****** full=y rows=y file=/export/export.dmp log=/export/ofsaimport2.log buffer=20000000
Please note that all the tables and indexes are imported successfully even after the error started to show.
Is it something serious, should I do the import again with statistics=none or I am just fine now and it something that is just related for the statistics.Is really "fragmentation" an issue to justify this table movement? Why do you want to "defragment" your schema? Is it because of performance issues? If this is the case you are wasting your time, if you tried to rebuild the indexes by this procedure, it is also a waste of time. If you are concerned about fragmentation because of "holes" and "islands" of unused space within segments and unused space below the HWM, that is something different, in my personal jargon, I'd rather use the term space reorganization.
If the data import was successful, then take a look at the dba_objects and verify if the program unit is still there and check its status.
You may also want to take a look at this note from AskTom that explains what this error means --> http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:571023051648
~ Madrid
http://hrivera99.blogspot.com -
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein -
DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP
Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Best Regards...,Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede -
ERROR = CONNECT failed with sql error '12518'
Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 16
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 09 10:33:51 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c 327]
Any suggestions pls
MaheshHi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh.. -
Start ALert Router failed with Database Error -444 SQLstate 42724
HI,
When I create a stored procedure SAPCL and follow the subsequents steps & Verify SAPCL is running, I get the message SAPCL stored procedure has been successfully installed.
Then when I Load the ALert Router(SUccessful) and start the ALert Router, I get the following message.
Database error -444 at EXE
> [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -444, ERROR: USER
> PROGRAM SAPCL COULD NOT BE FOUND
> DSNT418I SQLSTATE = 42724 SQLSTATE
> RETURN CODE
> DSNT415I SQLERRP = DSNX9CAC SQL
> PROCEDURE DETECTING ERROR
> DSNT416I SQLERRD = 0 0 0 -1 0
> 0 SQL DIAGNOSTIC INFORMATION
> DSNT416I SQLERRD = X'00000000'
> X'00000000' X'00000000' X'FFFFFFFF' X'00000000'
> X'00000000' SQL DIAGNOSTIC INFORMATION
Can you please let me know a few pointers in this regard.Hi,
ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10704] B ***LOG BV3=> severe db error 12154 ; work process is stopped
[dbsh#2 @ 1199] [dbsh 1199 ] B ***LOG BY2=> sql error 12154 performing CON [dblink#3 @ 431] [dblink 0431 ] B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified
Make a connectivity test with: "R3trans -d" and supply trans.log along with dev_w0 and dev_w1 traces.
Please refer Note 443867 - ORA-12154 Collective SAP note and correct your TNSNAME.ora and LISTENER.ORA entries.
Also see Note 34479 - Collective note for problems with SQL-Net V2 ORACLE.
Regards,
Bhavik g. Shroff -
When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe -
Installation fails with "internal error 2502"
I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments -
Import failing with no errors
All it says in logs for each table is
. . skipping table "<table_name>"
It's a full import from a 10.2.03 db into a 10.2.0.3 dbHi,
"INDEXFILE" , this is parameter is specified, index-creation statements for the requested mode are extracted and written to the specified file, rather than used to create indexes in the database. No database objects are imported.
Due to that that Objects are skipping.
The INDEXFILE parameter can be used only with the FULL=y, FROMUSER, TOUSER, or TABLES parameters.
Else you can perform a two step process as stated by Amardeep.
- Pavan Kumar N -
RAID 1 setup fails with POSIX error
I am trying to set up a RAID 1 array using 2 brand-new Iomega eGo 2TB Desktop Hard Drives. They are connected via Firewire 800, with the second connected to the first through Firewire pass-through. I'm on 10.6.8, on an iMac 9,1 with the 2.66Ghz Core 2 duo and 8GB RAM.
I complete all the steps to create the RAID array, add the drives to the array, select "Automatically rebuild RAID mirror sets", and when I hit "create", Disk Utility unmounts the disk, starts to create the array, and then gives me the following error.
Creating RAID set failed with the error:
POSIX reports: The operation couldn't be completed. Operation not permitted.
Am I doing something wrong in the setup? Does this mean one of the drives is a dud? Does this mean I can't create a RAID array with pass-through Firewire drives?
Any help or advice would be greatly appreciated.I ran the 1.1.1 upgrade this afternoon. I've been through the same process three times, but I was getting error 1602. Now when I unplug, reboot the Mac and reboot the phone, wait for everything to load, iPhoto recognizes the camera/pictures, but iTunes does not recognize the iPhone, and when it does, I get the spinning color wheel until I'm told that my iPhone timed out (or I get the error message above again). I've not hacked the iPhone, and even though iTunes isn't recognizing it, the phone is as fully functional as it was before the ill fated upgrade.
There is a support article but it appears to be geared towards Windows.
Error 1601 or 1602 when restoring iPhone or iPod touch in iTunes
Issue
When trying to restore your iPhone in iTunes, you may see the following message followed by an error code 1601 or 1602:
The iPhone could not be restored. An unknown error occurred.
Or when trying to restore your iPod touch in iTunes, you may see the following message:
The iPod "[username]" could not be restored. An unknown error occurred (1602)
Products affected
iPhone
iPod touch
iTunes 7.4 or later
Solution
Restart the computer and try to restore the iPhone or iPod touch again.
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes. Select the appropriate link below for instructions on how to accomplish this for your operating system.
Windows XP
Windows Vista
Try restoring the iPhone or iPod touch on a different computer using iTunes (if another computer is available).
Message was edited by: Lane Baysden
Maybe you are looking for
-
Wireless soulutions please?
-
Multiple Custom Synch Plugins For Same Business Object
Can I make multiple plugins for the same business object? The main reason I'm asking is because I want to have one item plugin that runs before the core item data synchs and another item plugin that runs after. Since the topic's here, if multiple plu
-
How to create BP with different BP Groupings (BU_GROUP) in IC?
Hi Experts, when creating BP in the Interaction Center there exists the possibility in Customizing CRM->Interaction Center WebClient ->Master Data->Define Account Identification Profiles it is possible to add a Grouping ID for the creation of all dif
-
List recipe (tx. c201) in lsmw using recording method
Hi. I'm trying to upload master data for recipe list (tx c201), and I'm not so sure which method I should use, i tried with an standard object but it works with idocs and i supposed to configure a lot of stuffs (ibounds, ports, etc), and using record
-
example: table A : fields --> company order no check status total price amount sell table B : fields --> company store order no store total price store amount sell please help me on how to solve, if system have to check on "check status" before filte