Automatic removal of previous backups not working

retention policy is window of 7 days
Sat:
crosscheck backup
report need backup
delete obsolete
backup incremental level 0 database
backup archivelog all delete input all
Sun-Fri:
crosscheck backup
report need backup
delete obsolete
backup incremental level 1 cumulative
backup archivelog all delete input all
Here is what is in the backup directory
incremental level 0 & acrchivelogs : Feb 25
incremental level 1 & acrchivelogs : Feb 26
incremental level 0 & acrchivelogs : Mar 4
incremental level 1 & acrchivelogs : Mar 5
Shouldn't everything before Mar 4 have been deleted by "delete obsolete"? I thought I understood RMAN but apparently not. Please help.

Hi
That you continue to have a full backup of Feb. 25 is correct. Retention policy set to 7 days means that you should be able to restore till 7 days ago; to do that you need a backup older than 7 days.
Your output is correct!
Bye, Aron

Similar Messages

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Web Gallery, previous/ next not working consistently

First time I've seen this: next and previously are not working good. Some work in the gallery, some don't.
Reboot Firefox, some different ones work, some dont. It's worrisome. I'm sending this to people- any tips?

.Mac email can be set up two different ways on the iPhone. For "Send to Web Gallery" button to appear when clicking on the action button while viewing a photo, you must have your .Mac email set up as IMAP. This is the default setup for a .Mac email account.
If you take the time to manually set up your .Mac email as POP, then you will not have the "Send to Web Gallery" option and you will be unable to successfully email into your web gallery even if all else is set up correctly.
To check to see how you have .Mac email set up on your iPhone, go to the Home Screen, tap Settings, tap Mail, tap your .Mac account name, tap Advanced, move down on the page, and make sure you see "IMAP Path Prefix" setting (it can be blank and does not need to be changed). If the "IMAP Path Prefix" is there, then you do indeed have your .Mac email set up as IMAP on your iPhone.
If you do have it set up as a POP account, you can delete that mail account by selecting the red Delete Account button when viewing your email account as listed in Settings.
To add your .Mac email account as an IMAP account, from the Home Screen, tap Settings, tap Mail, tap Add Account..., tap .Mac, and fill out the fields with your information, tap Save and it will verify access to your .Mac email account.

I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

See if these instructions work:
http://www.thesafemac.com/arg-genieo/
Ciao.

My Aurora Automatically updated and now its not working at all.I cant uninstall it to install firefox.

I'm using the beta Aurora, and it was working fine until it automatically update. It's not working anymore. The short cut key in desktop changes and when you click it. it says"Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item". I cannot uninstall it to install a new firefox.

Delete the shortcut you have at the moment and then create a new one as follows: 
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox. 
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)''' 
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

HT201269 how can i restore my ipad from a previous backup (not the most recent)

how can i restore my ipad from a previous backup (not the most recent). I can get the restore from backup, but there is only the most recent one visi
ble

Again, iTunes only keeps one normal backup, per device. Any other backups listed are backups created from restore points. These are time/date stamped & are not overwritten.

Backup not working for File Server

We have System Center 2012 Sp1 installed with Agent Version : 4.1.3453.0
We are protecting File Server which is member in DFS. We have Volume of More than 2TB and which is spanned accross multiple VHDs.
I am facing problem with Backup not working and DPMRA service is getting stopped unexpectedly. When i try to create recovery point manually i don't get option to syncrhonize the changes. 1st and 3rd option is geryed out.
I am getting Error on DPM as Affected area: E:\
Description: The replica of Volume E:\ on<ServerName> is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data
from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
 DPM failed to communicate with the protection agent on <Server> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
 More information
Recommended action: 1) Check recent records from the DPMRA source in the Application Event Log on FUSE.win2k.internal to find out why the agent failed to respond.
2) Make sure that the DPM server is remotely accessible from <Server>
3) If a firewall is enabled on the DPM server, make sure that it is not blocking requests from <Server>
4) Restart the DPM Protection Agent service on <Server>. If the service fails to start, re-install the protection agent.
 Synchronize with consistency check.
 Run a synchronization job with consistency check...
Resolution: To dismiss the alert, click below
 Inactivate
I have Re-installed Agent but it is not helping.
I have Other Volume labeled as F: and sized at 600 GB. Backup of that Volume is working fine for Same server.
Please Suggest how to troubleshoot.
Thanks in Advance.
Swapnil
Thanks, Swapnil Prajapati

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Why does power nap time machine backup not work on my August 2012 macbook pro retina?

Hello. I got a MacBook Pro with retina display in August of this year 2012. I have done the SMC ? firmware update and I have 10.8.2 installed on my machine. Power nap still doesn't seem to work. I have the button in energy saver preferences and I have clicked it so it looks like power nap should work. When I am running Time Machine backup with the time capsule and I close the lid (plugged into power) it appears that no progress is made when I reopen the lid. I have closed the lid with activity monitor running and with network displayed. When I reopen the lid it may take up to one minutes to come out of sleep. When it does come out of sleep I can see that there has been no network traffic. Eventually, time machine backup resumes and I can see several megabytes per second. When I closed the lid overnight, just to make sure backup didn't restart after lid closing, I saw that no progress had been made in backup when I reopened the lid.
What options are left if I already have 10.8.2 and I have done the required firmware? One person has mentioned a clean install but I really don't like to have to reenter all the different passwords and all the different preferences again unless that's absolutely necessary. Are there any other options left to try before a clean install?
One other bit of information. I have filevault turned on; however, it looks like others have a working power nap even with file vault enabled. If this is not an option, the power nap button should be grayed out when the machine is in filevault.
Thank you for any help.

Yeah I still have the same problem BTW; it still does not work.
The second I open the lid and take it out of sleep mode, it starts to backup automagically, but when it's sleeping EVEN when it's connected to AC power, TM backups do NOT work to my OS X Server.
I don't understand what the problem is here.
I didn't before but I do have FileVault turned on now -- should that make a difference?
In either situation it didn't work, but now that I think about it, I could understand why it wouldn't backup while asleep. Apparently the encrypted volume will stay encrypted during sleep and even at the lock screen; it's not until you open the lid and log in from the lock screen that it will unlock the encrypted boot volume.
But even still, I did *not* have FV turned on before, and this still did not work.
Is there some third party solution that can do what I want this to do?
Here's my use case:
1.) I have a mac mini at home that I use when I'm at home; it runs OS X server.app (bought and paid for) and has TM server turned on.
2.) I have a laptop that I mainly use at work and I don't use at all when I come home (ie. when I'm ready to head home for the day I close the lid and don't open it until I'm back at work the next day, but the laptop does come home with me every day).
What I want to have happen is this:
1.) The minute my laptop enters my home wifi lan (even though it's still asleep with lid closed) I want it to automatically backup the boot drive.
I thought that's what Power Nap was supposed to do, but then I found out that in order for this to work, you have to be connected to AC power; so then I tried that -- ie. every day I come home, I put my laptop in a docking station that has AC power, but TM backups while lid closed / sleeping STILL do not occur!
Thanks for your help everyone...Looking forward to a solution that works.
EDIT:
I found this thread:
https://discussions.apple.com/thread/4158709
"It looks like Power Nap doesn't perform Time Capsule backups when the MacBook Air screen is closed."
So apparently that is yet *another* requirement to get powernap working. The lid can not be closed.
What is the difference between sleep with lid open and sleep with lid closed!?

New MacBook (Aluminum), new Time Capsule (Dual-Band), backups not working

My Mom got a new (refurbished) 13.3" MacBook (Aluminum) and new (not refurbished) Time Capsule 500 GB (Dual-Band.) The Time Capsule is working great for wireless internet and we can copy files to and from it, but Time Machine backups are not working. I enabled Time Machine, selected her TC, and then when it tries to backup it sits at the preparing stage for a little while and then gives a very unhelpful "the backup failed" message. Unfortunately I don't have the exact error message, but it never gets out of the preparing phase. It doesn't stay in preparing forever, it only stays there for a minute or so before it gives up and reports the backup failed message and stops. It's unclear to me, searching these forums, if this problem is the same as others are reporting.
I've tried turning off Time Machine and back on, removing and reselecting the Time Capsule, etc. Nothing makes a difference. There are no backup files on the TC - it's brand new.
This happened out of the box, but I also tried installing the latest Time Capsule firmware. It didn't help.

Apple needs to create a configuration tool that configures all the Apple devices one owns by creating a network diagram using drag and drop symbols...
Sounds like a cool suggestion. If you want Apple to hear it, go to www.apple.com/feedback/timecapsule.html

Monthly and Yearly backups not working for Protection Group?

Hi
We have a Protection Group with 160 members currently attached to it. The group has the following customized Recovery Points:-
- 1 recovery point every 1 day for the last 2 weeks, 1 recovery point every 1 month for the last 60 months and 1 recovery point every year for the last 5 years.
The schedule is as follows:-
- Every Day at 01:00, Every Month on First Day at 01:00 and Every 12 Months on 01 January at 01:00.
The daily tape backups are working fine without issue but neither the Monthly or Yearly backups are being attempted. We have checked the monthly backups for this issue for the last few months and are unable to see any evidence of the Monthly schedule even
running? This means that we are having to manually label the Daily tapes once a month as Monthly tapes but they will then stay on the Reports for the next 5 years as DPM will constantly request these tapes back.
Are you able to help with this matter?
Not that we really want to do this but if we removed the group completely and re-create it would this cause problems with our restore points?

Hi,
This is a known issue that can occur in all current versions of
DPM including DPM 2012, to correct the condition, you simply need to perform this step. Any time before the next scheduled (monthly or longer) backup, manually update
the long term backup schedule by hitting the MODIFY button. The code that runs when modifying the backup schedule redoes the bacup schedules and it fixes the scheduling issue.
Below is a DPM Power-shell script that will show you the scheduled backups for all recovery goals for all protection groups. You can see the last time each recovery goal ran, and the NEXT run time, so you can monitor
the goals and re-fix them if necessary.
NOTE: It takes about 20-30 minutes before the fixed next run time schedule will be populated after modify the protection group and updating the schedule.
# This script will list all currently scheduled backup to tape jobs #
# It will list scheduled, last run and next run dates #
# Note: The script takes in consideration that the DPM Database was installed locally on its #
# Default instance. If SQL is installed on a different location/instance, edit the line #
# that starts with $instance = '.\msdpm2010 #
# Author : Wilson Souza #
# Date Created : 1/13/2012 #
# Last modified : 1/17/2012 #
# Version : 1.0 #
# This version of the script was only tested on DPM 2010 #
param([string] $verbose)
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
$ConfirmPreference = 'None'
cls
$instance = '.\msdpm2010' # <---- If DPM Database is on a different location, edit this line accordinly
$query = "use DPMDB
go
CREATE FUNCTION label (@GUID varchar(36), @kindred varchar(4), @vault varchar(8))
returns varchar (1024)
as
Begin
declare @result varchar (1024)
select @result = vaUltlabel from tbl_mm_vaultlabel where mediapoolid = @GUID and generation =
case @kindred
when 'Fath' Then '2'
when 'Gran' then '1'
when 'grea' Then '0'
end and
vault =
case @vault
when 'Offsite1' then '3'
when 'Offsite2' then '4'
when 'Offsite3' then '5'
when 'Offsite4' then '6'
when 'Offsite5' then '7'
when 'Offsite6' then '8'
when 'Offsite7' then '9'
else
'1'
end
RETURN @result
END
go
use DPMDB
select ScheduleId as name
,def.JobDefinitionId as JD
,FriendlyName as PG
,SUBSTRING (CONVERT(VARCHAR(10),active_start_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),1,4) as SD
,jobs.date_created as SCD
,SUBSTRING (CONVERT(VARCHAR(10),last_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),last_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),5,2) as LRD
,SUBSTRING (CONVERT(VARCHAR(10),next_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),next_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),5,2) as NRD
,dbo.label ((substring(xml,(patindex('%MediaPoolId%',Xml))+13,36)), (substring(xml,(patindex('%generation%',Xml))+12,4)), (substring(xml,(patindex('%vault%',Xml))+7,8))) as TL
,case
when substring(xml,(patindex('%vault%',Xml))+7,3) = 'off' then 'Long-Term'
else 'Short-term'
end as STLT
,case
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Fath' then 'Recovery Goal 1'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Gran' then 'Recovery Goal 2'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Grea' then 'Recovery Goal 3'
end as RG
from tbl_SCH_ScheduleDefinition sch
,msdb.dbo.sysjobs jobs
,tbl_JM_JobDefinition def
,DPMDB.dbo.tbl_IM_ProtectedGroup prot
,msdb.dbo.sysjobschedules jobsch
,msdb.dbo.sysjobsteps jobsteps
,msdb.dbo.sysschedules syssch
where CAST(sch.ScheduleId as NCHAR (128)) = jobs.name
and def.JobDefinitionId = sch.JobDefinitionId
and def.ProtectedGroupId = prot.ProtectedGroupId
and jobs.job_id = jobsch.job_id
and jobs.job_id = jobsteps.job_id
and jobsch.schedule_id = syssch.schedule_id
and (def.Type = '913afd2d-ed74-47bd-b7ea-d42055e5c2f1' or def.Type = 'B5A3D25C-8EB2-4032-9428-C852DA5CE2C5')
and sch.IsDeleted = '0' and def.ProtectedGroupId is not null
order by FriendlyName, next_run_date, next_run_time
go
drop function label
go"
$result = Invoke-Sqlcmd -ServerInstance $instance -Query $query
$count = 1
write-host " The list below shows all scheduled backup to tape jobs (short term and long term)" -f green
write-host
if ($verbose.ToLower() -eq '')
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 200" -f yellow; write-host
write-host
write-host " Protection Group name Creation Date [Schedule Creation Date] [Last Run Date / time] [Next Sched Run Date/time] Goal type Recovery Goal # Custom Tape Label"
write-host " ------------------------------ ------------- ------------------------ ---------------------- -------------------------- ---------- --------------- -----------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-13} {2,-24} {3,-24} {4,-27} {5,-10} {6,15} " -f $result1.PG, $result1.SD, $result1.SCD, $result1.LRD, $result1.NRD, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
else
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 110" -f yellow; write-host
write-host " Protection Group Term Goal Tape Label"
write-host " ------------------------------ ---------- --------------- --------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-10} {2,15} " -f $result1.PG, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
I cant seem to get this script to run.. can someone point out what might be missing..
I've tried creating a shortcut like the following as well:
Target: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -File "C:\Program Files\Microsoft
DPM\DPM\bin\dpmcliinitscript.ps1" "C:\Data\scripts\scheduledjobs.ps1"
Start in: "C:\Program Files\Microsoft DPM\DPM\bin\"
If i run as admin in just takes you to a command line prompt in PS..
Any thoughts on what is missing here.. i've modified the ps1 to reflect 2012 in my case.. 2012 R2
DPM
Tech, the Universe, Everything: http://tech-stew.com
Ok, the 1.6 script works.. but only if i run it from the ps1 script file.. by right clicking it and doing the Run with Powershell option (non admin).. my shortcut doesnt work.. same issue.. it just goes to a power shell prompt. The right click and
run is non admin mode as well.
When I run it with the right click it shows no jobs scheduled.. If i look in dpm 2012 r2 i see a yearly tape backup scheduled for today.. the script doesnt show me a way to also get the monthly to appear (i've set the monthly for a day later but it doesnt
appear in the scheduled tasks for next 7 days).. i was under the impression this script would help force the monthly to appear/run.. but even the yearly that does show in DPM scheduled tasks isnt showing up with the script (maybe admin issue?)
Tech, the Universe, Everything: http://tech-stew.com

User Login - go to previous URL not working

Hi
I have a user login set up using the DW server behaviour.
The problem I have is that the redirect to the previous url doesnt work and always directs a successful login to the default successful login page.
The problem seems to revolve around this part of the code:
                if (isset($_SESSION['PrevUrl']) && FALSE) {
                    $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
                header("Location: " . $MM_redirectLoginSuccess);
and in particular the use of the && FALSE check. I can see from my debugger that the value of $_SESSION['PrevUrl'] is properly set to the previous url. If I remove the && FALSE check the login works as I would expect and redirects to the previous URL. However, as this is 'out of the box' DW code I am concerned in case removing the && FALSE check may be doing some harm. I have to admit I dont understand the logic of what the && FALSE part of the IF statement is actually checking for.
Any advice and/or reassurance that by removing the && FALSE is not doing any harm or exposing me to any risks would be appreciated.
Thanks

session_start() is set
As I step through the code and watch the variables I can see that the value of $_SESSION['PrevUrl'] is equal to the previous url but $MM_redirectLoginSuccess remains as the default success page.
If I remove the && FALSE element from the IF statement, the value of MM_redirectLoginSuccess is changed to the the value of $_SESSION['PrevUrl'], which is what I want.
So my question is, what is the && FALSE bit doing and why is it there and do I need it?

Time Machine backups not working with Yosemite upgrade?

Time Machine backups "Waiting" with no data after Yosemite install?

But still not working.....Im getting some error message/info come up though that i never had come up before when running mavericks....I can't even insert a 2.9MB pic/image of pic i took of screen error msg...says 3.0MB Max??
Saying something about the disc couldn't be found.....but i have highlighted/encrypted back up disc selected...not "available discs".....back up disc is the one I've always backed up to....can anyone on here just help me with this please!!??
Thank you.

Iphoto remove photos from iphone not working

For the past couple months iphoto will not delete the photos from my iphone. It successfully imports them, prompts to delete, appears to delete but doesn't actually remove them. They are still on my iphone. iphoto recognizes that they have already been imported and asks to delete them again the next time I plug in my phone, I accept, looks like something is happening but they are still there. I've tried image capture as well and there is no way to delete off the phone in image capture. Help!?

Can it be, that you have enabled iCloud Photo Library (Beta) on your iPhone with iOS 8.1.3? Then you can import photos from the phone, but deleting from Image Capture or iPhoto will not work, if the photos are in iCloud Photo Library.
iCloud Photo Library beta FAQ
Delete the photos directly on the iPhone or using the icloud webpage -
Use the "Photos Beta" app on your iCloud page:
https://www.icloud.com

ADCS Remove child table is not working

Hi
The AD out-of-box adapter ADCS Remove from child table is not working correctly.
when i remove data from child table the task status shows completed, but the description inside the task shows that the GROUP HAS BEEN REMOVED ALREADY FROM TARGET.
But on checking the AD I found the groups were not removed actually.
In the log i found this error
Running Remove User From Group
DEBUG,03 Nov 2009 10:21:06,099,[OIMCP.ADCS],tcUtilADTasks::removeUserFromGroup() Enter
DEBUG,03 Nov 2009 10:21:06,099,[OIMCP.ADCS],tcUtilADTasks::getLookupCodeValue() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcUtilADTasks::getLookupCodeValue() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcUtilADTasks::getObjectByObjectGUID() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::search() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Exit
INFO,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],SSL option is not selected in ITResource
DEBUG,03 Nov 2009 10:21:06,131,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::search() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcUtilADTasks::getObjectByObjectGUID() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Exit
INFO,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],SSL option is not selected in ITResource
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Exit
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::modifyAttributes() Enter
*ERROR,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],The error occured in tcADUtilLDAPController::modifyAttributes():null*
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Enter
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Exit
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcUtilADTasks::removeUserFromGroup() Exit
Any thoughts would be grateful
TIA,
Manoj

Hi Manoj,
The error message below is performed when the connector tried to remove the user from a user group removeUserFromGroup() (ADCS Remove User From Group), so the user group will not be removed. To delete a group, you have to run the delete group task of AD Group process.
When the user has already been removed from the group, the connectors shows null to the tcADUtilLDAPController::modifyAttributes():null
Renato.

Automatic removal of previous backups not working

Similar Messages

Maybe you are looking for