Automatic removing Midlet suite by another Midlet without user intervention

I would like to use a Midlet to remove another Midlet which is already installed on the device.
Could I do this? Are there any methods for doing this?
Please help me!
Thank you in advance.

That's a different matter. The second MIDlet is launched by the Application Manager at the scheduled time, not by the MIDlet that books the PushRegistry alarm. And there's no way you can possibly
go back to my midlet again.Apart from which, many devices will ask the user's permission before launching an application scheduled by PushRegistry, so even the first part of your requirement can't be guaranteed to be seamless.
Why do you think you need this? There may be an easier solution, like using related classes with only one MIDlet.
db

Similar Messages

Send sms from midlet without user intervention

can anyone plz tell me how to send an sms to a fixed mobile no. through a j2me midlet.

the phone i am using for testing is sony k750
it has options for providing permissions to an application for sending sms without permission. so there must be a way if the permission is given.
plz help me..

Animate elements one by one without user intervention

Hi, Good Day,
I have series of rectangles and textblocks on page.
I need to show them moving at different places one by one according to the contents of textblock without user intervention.
If I use for loop then it show movement of only last rectangle as I have to stop the storyboard in each iteration of loop.
Is there any way to move these rectangles automatically one after another????
sunaina

A storyboard has a completed event. I think that's the easiest way to handle this sort of requirement.
You could chain them.
So you get a reference to a storyboard, add a handler to it's completed event which starts the next storyboard...
And start it.
Obviously you will have storyboards which do something or other but here's how I attach anonymous completed eventhandlers to a storyboard:
Storyboard sb1 = new Storyboard();
Storyboard sb = new Storyboard();
sb.Duration = new TimeSpan(0, 0, 1);
sb.Completed += new EventHandler(delegate(object s, EventArgs a)
sb1.Begin();
sb.Begin();
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

Generate a Report Dynamically without User Intervention and Output to XML

Here's the scenario for which I am trying to find a solution. Any help would be greatly appreciated.
I have a series of reports that the users generate from a UI by selecting the report, setting the values for a list of parameters, and then click a submit button. The report is generated in the UI for them to view. They can print it from here or export it to Excel.
They would like to be able to schedule a report to run daily without user intervention using a saved set of parameters. The system would run the report automatically and email it to a defined set of email addresses.
To do this, we need to have the report generated in a string or xml so a Java process can read it and email it.
I see that I can change a report's template to export:xml so I feel that it is possible. How can I export a report to XML without user intervention? Can the report template be changd dynamically at runtime? Ideally, I need some way to call this same report and have it output as a string data or xml to be used by a Java process that would store and generate the report for email.

Hi Kumar,
From Program1 you are calling Program2, using submit syntax (inside Program1).
While using submit, if you have correctly filled up the selection screen of program2, then it will AUTOMATICALLY get executed, WITHOUT F8.
If there is any compulsary field in program 2, which does not get populated, then it will not run automatically, or unless some special code is written in program2.
If you do not want the output of Program2 on screen, then u can use
SUBMIT Program2 AND RETURN.
In that case, no selection screen (of program2) will appear and neither the output of program 2.
Regards,
Amit Mittal.
Edited by: Amit Mittal on Dec 23, 2009 4:10 PM

Can You Play Multiple Playlists Without User Intervention

Can you stack and play multiple playlists? ie if you had three playlists of 50 songs each, could you pick all three, play all the songs in the first playlist, when it is finished move automatically to the second playlist play its songs then automatically move to the third without user intervention? And if so, can you play each of these in shuffle mode?

There's no "impromptu" method of doing so that I know of.
As far as un-impromptu methods (it's always fun inventing words), it will depend on whether you want to listen to this mega-playlist on an iPod or just with iTunes.
If it's just with iTunes, you can go to the File menu > New Folder command and create a new folder which we can call the Mega-Playlist folder. Drag the three playlists in question into that folder. When you select that folder and press Play, iTunes should go through all the songs.
If it's on an iPod, since Folders don't transfer over from iTunes, the only solution I know of would be to create a Smart Playlist with iTunes that will -
Match any of the following rules:
Playlist is the first playlist +
Playlist is the second playlist +
Playlist is the third playlist.
Synching this mega-playlist to your iPod will allow you to select it from the Playlist menu.
Shuffle mode would shuffle songs from all three playlists together, not shuffle songs from the first playlist before moving on to shuffling songs from the second playlist before shuffling songs from the third playlist.

Material creation without user intervention

i have to create a material without user intervention. i am using BAPI_MATERIAL_SAVEDATA for this. it is not showing any error. but the return is having the message 'No description found'. how to transfer the description to this bapi.
this is the code i am trying:
DATA: mnum like zmara01-mno,
       mat_data like BAPIMATHEAD,
       plantx_data like BAPI_MARCX,
       salesx_data like BAPI_MVKEX,
       sale_data like bapi_mvke,
       plant_data like bapi_marc,
       mate_data like bapi_makt,
       E1BP_MAKT like E1BP_MAKT,
       cli_data like bapi_mara.
DATA: E_RETURN LIKE BAPIRET2.
data: MATERIALDESCRIPTION like BAPI_MAKT
                  occurs 0 with header line.
*data: m(18) type c.
CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          NR_RANGE_NR                  = '01'
          OBJECT                       = 'ZMNUMBER'
         QUANTITY                      = '1'
       IMPORTING
         NUMBER                        = mnum.
message i003(zmsg) with mnum.
mat_data-material = mnum.
mat_data-ind_sector = 'I'.
mat_data-matl_type = 'DIEN'.
mat_data-basic_view = 'X'.
cli_data-base_uom = 'EA'.
cli_data-base_uom_iso = 'X'.
sale_data-sales_org = 'EISO'.
sale_data-distr_chan = 'SR'.
salesx_data-sales_org = 'EISO'.
salesx_data-distr_chan = 'SR'.
plant_data-plant = 'EIHO'.
plantx_data-plant = 'EIHO'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    HEADDATA                   = mat_data
   CLIENTDATA                 = cli_data
CLIENTDATAX                =
   PLANTDATA                  = plant_data
   PLANTDATAX                 = plantx_data
FORECASTPARAMETERS         =
FORECASTPARAMETERSX        =
PLANNINGDATA               =
PLANNINGDATAX              =
STORAGELOCATIONDATA        =
STORAGELOCATIONDATAX       =
VALUATIONDATA              =
VALUATIONDATAX             =
WAREHOUSENUMBERDATA        =
WAREHOUSENUMBERDATAX       =
   SALESDATA                  = sale_data
   SALESDATAX                 = salesx_data
STORAGETYPEDATA            =
STORAGETYPEDATAX           =
FLAG_ONLINE                = ' '
FLAG_CAD_CALL              = ' '
NO_DEQUEUE                 = ' '
IMPORTING
   RETURN                     = E_RETURN
TABLES
   MATERIALDESCRIPTION        = MATERIALDESCRIPTION
UNITSOFMEASURE             =
UNITSOFMEASUREX            =
INTERNATIONALARTNOS        =
MATERIALLONGTEXT           =
TAXCLASSIFICATIONS         =
RETURNMESSAGES             =
PRTDATA                    =
PRTDATAX                   =
EXTENSIONIN                =
EXTENSIONINX               =
loop at materialdescription.
message I004(I) with materialdescription-matl_desc.
endloop .
MESSAGE I004(I) WITH E_RETURN-TYPE.
    if sy-subrc = 0.
     message i005(zmsg).
    elseif sy-subrc <> 0.
     message e006(zmsg).
    endif.
i am trying to give direct entries to test it . please help in this issue immediately.

Hi dear,
welcome on board!
If you want an answer immediately I think you have to post your question in a more appropriate forum...
take a look to https://www.sdn.sap.com/sdn/collaboration.sdn and choose one of the available forums !
Good luck!
Roberto

[CS4] save on a local file without user intervention

hey,...sorry for my english...
i work with a other application who need to have the
information written in the local file without an user intervention
so...
i would like to know if it s possible to write or rewrite on
a local file without intervention of the user...
whitout the ""save dialogue box" or with a managed save
dialogue box...
how to write in a local file without user intervention...
i need really an answer to make real my project...
thans for your conprehension

hey
thx a lot for your help ...
if i understand well ...
it is possible to write or rewrite in a specific folder
who is determinated by the application folder of
an specific AIR apllication
who during his install give the ""authorization to
write/rewrite /save in his specific installation foder"
so it s possible with combination of an AIR application.....
can you give me some information about this AIR application
that i must build...
some direction to ask help
because i dont have the knowledges to do that
what style/type of AIR application
what charachteristics of this AIR application....
so some information that can i use to ask help in the good
place...
one more time thx a lot for your help...;)

HOw to download a file in background without user intervention?

Hello people,
A few hours ago I asked a couple of guys how to download a file to html. For that I am most thankful, and as mentioned this is a two part question, my other question is about how to proccess downloading the html in background and to automatically send it to a folder or other path. Without any user intervention.
Example, I run a long report to be downloaded in background. The lets say the next day, I can get the file in a folder. Thanks guys take care!

Hello guys thanks for your help so far. I have been off again on again with this task because its more for future purposes than anything.
So far I have searched the net and stuff and decided that I will use WWW_LIST_TO_HTML since I want to download it the way it is. I am also going to use open/close dataset as many of you have mentioned.
SO far Im just trying it out with a simple report program to see its funcitonalities. My code goes like this.
<b>REPORT ZCCYT_COOL2 NO STANDARD PAGE HEADING LINE-COUNT 100 .
DATA: IFIELDS TYPE TABLE OF W3FIELDS WITH HEADER LINE.
*DATA: ihtml   TYPE TABLE OF w3html   WITH HEADER LINE.
DATA: IHTML   TYPE TABLE OF W3_HTML WITH HEADER LINE.
DATA: BEGIN OF I_TAB OCCURS 0,
        MATNR LIKE MAKT-MATNR,
        MAKTX LIKE MAKT-MAKTX,
      END OF I_TAB.
SELECT-OPTIONS: SO_MATNR FOR I_TAB-MATNR.
SELECT MATNR MAKTX
FROM MAKT
INTO TABLE I_TAB
WHERE MATNR IN SO_MATNR..
LOOP AT I_TAB.
WRITE: / I_TAB-MATNR,
           I_TAB-MAKTX.
ENDLOOP.
CALL FUNCTION 'WWW_LIST_TO_HTML'
   EXPORTING
       list_index = sy-lsind
     TABLES
          HTML       = IHTML.
DATA: FILE TYPE LOCALFILE.
FILE = '/usr/test.html'.
OPEN DATASET FILE FOR OUTPUT IN BINARY MODE.
LOOP AT IHTML.
TRANSFER IHTML TO FILE.
ENDLOOP.
CLOSE DATASET FILE.</b>
NOw the problem now though is that the file isnt downloading or saving at all. I cant seem to get what is wrong since the path does exist and the this seems the universal way to implement the program. Im guessing the problem lies in the file name, because everything seems to work fine. Hope to hear again soon sorry for not visiting this place sooner cuz I was buzy elsewhere.

Spaces are switching without user intervention

I generally use 4 spaces and I've noticed on Mavericks apps will not stay ont he same space they are assigned too. I've also noticed designated spaces switching without any user intervention. For example "Desktop 3" and "Desktop 4" switch places and 4 will become 3 and visa versa. Has anyoen else encountered this?

I am also experiencing problems where I lose a route and I get disconnected from the internet. I get it back by issuing a command:
route get 192.168.2.1 (my wireless router)
route get 192.168.1.254 (my DSL modem)
However, I have no idea why this gets deleted in the first place.
if you discover an answer please do post it here.
Thanks,
Ted

Events without user intervention

I am developing a control application in which in open loop the user has interaction with controls in the GUI and a generation of events begin an action. However in closed loop the controller generates the values and rewriten the values at the controls in the GUI without intervention of user in the GUI. The events are not identified within the events loop located within the white loop. I am trying to work with Dynamically Registering Events but i am not have sucess. The specific question is how generated an event when a value control changes without the intervention of the user in the GUI

Use a property node for the front panel control and select the property
"Value (Signaling)". When writing to this property, the event is
triggered.

Events/without user intervention at the GUI

I am developing a control application in which in open loop the user has interaction with controls in the GUI and a generation of events begin an action. However in closed loop the controller generates the values and rewriten the values at the controls in the GUI without intervention of user in the GUI. The events are not identified within the events loop located within the white loop. I am trying to work with Dynamically Registering Events but i am not have sucess. The specific question is how generated an event when a value control changes without the intervention of the user in the GUI

Gracias por utilizar los foros
la solucion ya la tienes en esta liga
http://forums.ni.com/ni/board/message?board.id=170&message.id=196808#M196808
saludos
Erwin Franz R.

Accessing E-business suite in another network without configuring DMZ

Hi
How can i enable to access E-business sutie externally or to a different location.I dont want to setup the DMZ configurations and reverse proxy.Our Company have another Remote branch and they are not in same network.How can they able to access the E-business suite without enabling DMZ and reverse proxy.Is there anything like make the
IP of the Apps server as public will solve the issue ?
rgds
rosh

To make it public, you just need to change the IP Address of the application and the database servers to the real one and follow the steps in the following notes. Once you are done, the system will be accessible to the users then.
Note: 338003.1 - How to change the hostname and/or port of the Database Tier using AutoConfig
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=338003.1
Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=341322.1

Quiet removing Antivirus SCCM Endpoint Protection without user intervention

Antivirus SCCM
2012 Endpoint Protection is deployed on Workstations.Can
I uninstall Endpoint Protection on the
computers on the network automatically via SCCM or command-line tools
invisible from the user?

You need to create a package to uninstall the
SCCM 2012 Endpoint Protection.
Uninstall string: C:\Windows\ccmsetup\scepinstall.exe
/u /s
Make sure you disable End point protection policy and select False or No in
Manage Endpoint Protection client on client computers, otherwise the client will be reinstall.
http://technet.microsoft.com/en-us/library/4acd0c29-e453-4863-8194-e479263291c8#BKMK_EndpointProtectionDeviceSettings
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable.
Thanks.

How can I map a drive to Azue file shares without user intervention or having a user logged on?

I have the file share created, and can manually map the drive. I have even created a batch file that will create the drive mapping. One step further, I used the following regedit to create the mapped drive:
Regedit:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
add new string value:
value name: MapS
value data: c:\azurefileshare.bat
I have a scheduled task running a batch file running the net use command, and the drive is available, and I can create/delete files, so access is not an issue.
All works fine if I log onto the server, however, what I am trying to accomplish, is to have that drive mapped upon reboot without having a user log on.   Checking the log file running the net use command when no one is logged on, I get the following:
Status       Local     Remote                    Network
Unavailable S:        path of file share
Microsoft Windows Network
The command completed successfully.
New connections will be remembered.
Is there a way to accomplish this? Thanks in advance.

Hello wdick,
Thank you for your response and getting back on this issue. I am sorry that the blog that I referred to was not available. I pretty much thought that you must be referring to the ‘File Services’ which is in preview yet. I recently had another user with a similar
question but currently, the users can access the files using only 'Interactive logon'. You can refer to this link:
http://social.msdn.microsoft.com/Forums/en-US/1f1fa9b5-a81d-4067-9d90-2c7c47667732/azure-file-services-authentication-without-prompt-passthrough?forum=windowsazuredata
Thanks.
Syed Irfan Hussain

Saving a modified word document without user intervention

Dear Reader,
I have successfully opened a template (MS Word document), and
modified the bookmarks using DDE; however, now in attempting to
save the document without the user having to respond I am having
problems. I have attempted to use DDE.EXECUTE(ConvId,'[Save
()]',1000); but this drops into the VB debugger and nothing is
saved. If I remove the "[]" then an error occurs. If I attempt
to place something with the brackets () an error occurs within
the VB Debugger.
Looking for a simple coding example using DDE.
Thanks in advance.
Gerry

Hi Tina,
I would first suggest installing all available updates to his/her system and Office installation, including updating the video card driver to the latest version. Then try again.
Also try to do a Windows clean boot to determine if the issue was caused by any applications/services conflicts:
http://support.microsoft.com/kb/929135/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Automatic removing Midlet suite by another Midlet without user intervention

Similar Messages

Maybe you are looking for