Automatic restart of Error-Message in Adapter-Engine (Job?)

Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
Jürg

Hi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh

Similar Messages

Strang problem when searching error message in Adapter Engine

Hi all,
In RWB message monitoring, I tried to search all the error messages for yesterday and got no results. But I know there were actually several error messages for yesterday because I got several alert mails.
Then I went to my mail box and copy the message id and used it to search again. Then I found this message was exactlly in "System Error". But if I search all the error messages for yesterday, I get no results.
Anyone knows the problem?
Regards,
Hui

Hello Hui Wang,
<b>Adapter engine resides on Java stack and u view sxmb_moni on the ABAP stack which displays only Integration Server related errors.</b>
Message that passes the Integration pipeline are visible in sxmb_moni. Errors related to CC can be traced in CC monitoring or adapter monitoring in RWB.
With Regards,
Vidya
**************PLEASE REWARD POINTS IF FOUND USEFUL

Error message in adapter engine, can u solve it

Hi Gurus,
I am facing problem when invoking webservice through XML Spy, its showing the following error:
<b>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Database connection could not be established
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)</b>
Can anyone please tell why it will come and when it will come..
Give me suggestion how to solve this issue.
step by step procedure will be appreciated..
Thanks & Regards.,
Pushparaju.B.

Hi Ashutosh,
is your scenario like SOAP to JDBC?
in that case make sure that you have correctly loaded the jdbc driver followin this link:
<a href="https://webservice.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">How To Install and Configure External Drivers for the JDBC & JMS Adapters</a>
Hope this help
Francesco

Getting error in the adapter engine when sending a message

Hi,
I'm always getting this error in the adapter engine: Message processing failed. Cause: com.sap.aii.messaging.util.URI$MalformedURIException: no scheme
The comm channel ends up in error because of messages having the above error.
Could someone please help?
Thanks.
Mike

Mike.
Please check this links.
Check your adapter and restarted.
com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number
Re: Prerequisites to setup configure mail scenario.
error in communication channel
Error :Receiver File Channel not Initialized

Message automatic restart: XI connectivity vs HTTP adapter

Hi all,
I have a scenario where XI sends the same message to 2 different receivers, assynchronously. One is another XI system, through XI connectivity. The other is a websphere Portal using HTTP Adapter.
We have tried to load 100 messages to see the performance of the XI system.
We get some errors due to 405 ICM_HTTP_INTERNAL_ERROR.
What happens is that for the messages sent to the other XI, the automatic retry mode takes care of it, but for the Portal the messages do not restart automatically, they stay in error.
Shouldn't the automatic retry mode be working also for the HTTP adapter? Shouldn't it be trying to restart all assynchronous messages automatically?
Thanks,
Miguel

Hi,
Please look at the weblog which gives some reports that you need to run at frequent intervals. The report restarts the error messages
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards
vijaya

Unable to cancel messages in adapter engine

Hello,
We have implemented an interface with file connector. Since one week, all messages are hanged in the adapter engine with status TO BE DELIVERED.
I tried to cancel but the folowing error message appears :
Could not fail message. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not fail message 0013211d-2dc8-1def-a8a4-938b4635c3af(INBOUND), as triggered by admin action. Reason: Predecessor not in final state.
This interface is a proxy from ECC6-->csv file and i can't see the corresponding messaging in any queues SMQ1..
They are only available in the RWB/message monitoring/adapter engine
Can you tell me how to process these messages or cancel ?
Regards

Hi
Messages will go in to the state Tobe delivered if there are no threads available for the particular adapter.. and lack of threads is due to the state of the messages in DLNG...
Check the messages which are in DLNG and the reason behing long time for processing the same..(can be restart of the target system...)
if you get the error saying predecessor is not in final state...
for this you need to check the parent message in the queue which is causing this. this can be done using messaging system url
http://host:port/MessagingSystem/
go here and check the tab EOIO message ..... and there check the messages which are blocked and check the queue names if need to find the paticular queue..and reprocess if the error occured can be rectified...
HTH
Rajesh

Cannot resend messages in adapter engine

Hi all,
I encountered thousand messages in adapter engine yesterday with error category: XI_J2EE_ADAPTER_ENGINE, error code: JMS_TRANSMISSION_ERROR.
First I checked the affected communication channel, and there was an error in MQ side. Also, our database crashed. But these issues were resolved already. Then I tried to resend the messages, but still it ended up in system error. As I looked in the log,
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: JMS_--_Receiveron node: -having object id: - encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1193614619284 JMSCorrelationID:--
Exception caught by adapter framework: Connector for ConnectionProfile of channel: JMS_----
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Pending message discovered: -
.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling channel parameter to 'Bypass' and restart the message afterwards.
Exception caught by adapter framework: Pending message discovered: -
.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling channel parameter to 'Bypass' and restart the message afterwards.
Every time I tried to resend the message, it ended up in error stated above. But there are successful messages today which means that the communication channel is working fine.
How can I resend the messages stucked in the adapter engine? Hope someone can help me.
Thanks a lot in advance.

May be when u tried to send the message some of the message got stuck in AE due to some Error.
As I no the message can stuck in AE when....Target Systems is down, Test data is not valid for receiver..then few of the messages goes in System Error and later message come in waiting/Holding/To be Delieverd state...
Check all the messages that has in System Error status...
Thanks
Farooq.

CPALookupException while sending a Test message to Adapter engine

Hello Experts,
I am getting following exception while sending a test message to Adapter engine through Runtime Workbench.
Error while sending message: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=<Configured Party>;TP=;FS=<Configured Communication component>;TS=;AN=<Configured Outbound Interface>;ANS=<Configured Namespace>
This scenario works fine when I submits the message through Integration engine. So ID configuration is perfect. Also cache contents are upto date.
Thanks in advance.
Regards
Rajeev

Error is clearly saying that it is unable to find receiver agreement for that particular interface.
Please check your receiver agreement for the interface.
If your receiver agreement is fine then do CPA cache refresh using following URL:-
http://<host>:<port>/CPACache/refresh?mode=full

Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple,

macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

Archiving message in Adapter Engine in XI 3.0

Dear all,
Could you please explain the procedure of Archiving Messages in Adapter Engine in XI 3.0.
I have read many blogs regarding deleting messages in Adapter Engine, but nowhere i can see about Archiving.
I have been told that activating and scheduling "Default Version Archive Job" in RWB->Components->Adapter Engine->Background Processing would solve the purpose.
But while activating, i am unale to set rules, as it gives error " Rules are not allowed for jobs with set 'archive edited messages only' flag."
Thanks and regards

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

PI 7.1 - Message Monitoring - Adapter Engine (Database Overview)

Hi Friends,
In Message Monitoring --> Adapter Engine --> Database (Overview) is not working. It throws the following error message.
no_connection Exception Message: RemoteException in Method: CentralViewManager: getIProfiles( IApplication, boolean ). Communication-related failure. Message: java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: An error occured while reading data from the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document. The error was: com.sap.security.core.server.destinations.api.DestinationException An error occurred while reading the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document, type WebService. The error was Internal error during the decryption process...
But, Adapter Engine --> Database option is working. What could be the problem ?
Kindly clarify, friends.
Kind regards,
Jegathees P.

Hello friend,
May be it is related with connection problem check with your basis people .
Regards,
Ravi.

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

How to see old successfully delivered messages in Adapter Engine

We are unable to see the messages that were successfully delivered by Adapter Engine more than a day.Ho do we see old successfully delivered messages by Adapter Engine.We are only able to see the messages that were 1 day old.We are using PI 7.1.
We are able to see the older messages in Integration Engine as per the config in sxmb_adm.
Any Help greatly appreciated.
Thanks,
Aravind

Only message that contain error,holding,not delivered are getting persisted not the sucessfully delivered ones.
Is there any Archiving scheduled for your Adapter Engine?
I want to see the old messages that were delivered sucessfully
In Message Monitoring Itself select Archive (instaed of Database) and make a search.....if archiving is scheduled then you should be able to see the messages by this option.
Regards,
Abhishek.

My macbook pro suddenly freezes; screen turns off and computer freezes. Have to hard restart. Error message appears upon restart, saying something about kernel, etc. Can anyone please help on this issue?

For the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
Andrei

For the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
Andrei

When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

Try:
iOS: If you can't back up or restore from a backup in iTunes

Automatic restart of Error-Message in Adapter-Engine (Job?)

Similar Messages

Maybe you are looking for