Automatic Reversal Settlement

Hello All,
I am working on a requirement which needs the system to check for the invoices that are for less then the quantity of goods received and older then 90 days. After the 90th day, the system should automatically reverse the accruals.
My question is, has any worked on a similar situation?? If so what could be the best possible solution.
I appreciate all the help.
Thanks,
Madhavi.

Hi,
There is no standard solution available to this.  You may have to go for a custom development for this requirement and schedule in a batch job.
Best Regards,
Madhu

Similar Messages

  • Automatic Reversal of Result Analysis Posting

    Dear Experts,
    I would like to ask for suggestions in solving below case in my current project:
    1. Project is created for sales of power solutions. Most of them are long-term, thus cost-based revenue recognition method is applied.
    2. Result analysis with cost-based method (03) is periodically executed for project. Therefore, every month there are some revenue deferral/ accrual posting calculated based on actual cost - before the project is completely billed.
    3. It is expected for revenue deferral/ accrual posting resulted from result analysis to be automatically reversed immediately in the next period (e.g. if RA is executed for July 2014, reversal posting needs to be immediately posted with posting date Aug 1st, 2014).
    At first we were thinking to define new document type specifically for the result analysis posting, and perform mass reversal using F.80 transaction. But then we came to realize that result analysis entries are posted after settlement is executed -and accounting document generated from settlement transaction cannot be directly reversed in finance.
    Anyone has encountered the same issue? How do we reverse result analysis posting without reversing the whole settlement transaction?
    Thank you,
    Regards,
    Analistia

    Hello,
    First you need to configure the functionality from the bellow path
    SPRO Financial AccountingGeneral Ledger Accounting Business Transaction  Manual Accruals  Basic Settings
    Once Engine configured Accrual document can be created through the easy access menu.
    AccountingFinancial AccountingGeneral LedgerPeriodic Processing   Manual Accruals  Create Accrual Objects
    Execution of Accrual documents
    AccountingFinancial AccountingGeneral LedgerPeriodic Processing   Manual Accruals  Start Periodic Run
    Regards,
    Venkat

  • F5568 - Fiscal year 2010 is not allowed on CO-RA Reverse Settlement

    Hi,
    I´m running report RKO7CJ8G, my goal is make settlement in 2010 and post the document in 2011. When I inform Settlement Period = 12, Settlement Year = 2010 on the Parameter box and set reverse settlement on box Execution Type and posting period = 9 and posnting year = 2011 on optional parameters, I´m receiving the message: "Message no. F5568 -> Fiscal year 2010 is not allowed". I´m not expert in this module and I´d like to know if this operations is allowed, or is possible to do.
    We are in 2012, the post will be in 2011 and settlement in 2010.
    I look trx OKP1 and period 12 year 2010 is totaly open, like OB52.
    Thanks in advance.
    Regards,
    Egberto

    Hi Ajay,
    Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
    I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011??  Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
    Your inputs will defenitely help me to get an clue.
    Regards,
    Devendran

  • Bdc for reverse settlement using VA88 okcode 'stor ' not working

    Hi ,
      I have done recording of the VA88 transaction to write a program for reverse settlement of some sales orders for particular controlling area and Co business transaction.i am using call transaction method,the issue i am facing is when i execute , reversing is not happening , when i checked with mode A in call transaction i can see the values are populated in the VA88 screen and the bdc_okcode '=STOR' which is meant for reverse  is coming , but when i click it nothing is happening.
    any idea what is wrong here. is it because the okcode is not working as desired?..what will be a solution.
    thanks & regards.
    Ras.

    I think the problem in recording..can you please do the recording again and cross check your BDCDATA internal table with the recorded one
    Nabheet

  • Automatic reversal of accounting document

    Hi all,
    I had a problem with automatic reversal of accounting document . In the Tcode FBS1 whenever a document is posted automatically it should be reversed using F.81. I tried using enhancement spot and Submitted  that transaction F.81 and passed the values to it. But the problem is whever i am using the code in the enhancement spot. i am not even able to get the generated document in FB03. and in the report i am getting the message 'No list Generated'. can any one help me out how to reverse the document automatically.
    Thanks & Regards
    sreehari p

    closed

  • Error with Function Module for Automatically Reversing FI Documents

    We are trying to use BAPIACREV to automatically reverse a document as part of workflow but get an error with 2 of the import parameters stating they were never transferred:
    1) OBJ_KEY_R
    2) OBJ_SYS
    Does anyone know how to resolve this?

    Hi,
    OBJ_KEY : Reference Key
    This key value must be created while posting the document and this key must be maintained in any of SAP tables
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_KEY in BKPF-AWKEY field.
    OBJ_SYS : Logical system of source document
    Logical system may be maintained in some table.
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_SYS in BKPF-AWSYS field.
    or you can use following FM to get logical system
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
    OWN_LOGICAL_SYSTEM = L_V_OWN_LOGICAL_SYSTEM
    EXCEPTIONS
    OWN_LOGICAL_SYSTEM_NOT_DEFINED = 1
    OTHERS = 2

  • Automatic reversal of WIP

    Hi all
    my client wants that the system should automatically reverse the previously calculated WIP after final confirmation of order.Is it possible? if yes what is procedure?(with out useing KKAX &KO88)
    urgent pl
    Regards
    Sankaram

    Hi
    The system will automatically reverse the WIP when the order is confirmed fully. You need to do the month end closing process as mentioned by you once again after the order is completely confirmed. In the period end closing there is config in calculating methods where we mention when to cancel WIP.
    It is not possible to reverse the WIP with out running KKAX and CO88/KO88. Only if yu run these once again it is possible to do it automatically. They can use KKAO and CO43 i.e running for collective.
    Anand

  • Automatic reversal of docs

    Hi Experts,
    we put through some journals(Bad debt) using document type AC but it was not being automatically reversed as it was fine earlier.
    help me to check this.
    Thanks,
    vani

    Hi Vani,
    May you explain your question in more details, where you post documents, and how you can do the automatic reversal, because as far as I know there is not function in FI for reversal documents automatically.
    Best Regards,
    Gladys

  • Automatic reversal of journal entry into new posting period

    Is there a way to set automatic reversal of a journal entry when creating a JE in the next posting period?

    Hi,
    I do not think this requirement can be met. There is no automatic reversal of document if it is being posted in the next period.
    However, you can write a validation in order to prevent the users to post in next period in GGB0 and assign the same in OB28.
    Hope this will solve your issue.
    Regards,
    Ravi

  • Automatic reversal of accrual document

    Hi SAP Gurus,
    How can I make automatic reverse of accrual document?
    I have the knowledge of F.81 to reverse accrual document. But my client wants to make automatic reverse of accrual document.
    Please suggest immediately
    Regards
    Tapan

    Hi,
    Try to use FB08 or F.80 (for mass reversal).
    Regards,
    Eli

  • Automatic reversal of the stock provisioning entry

    Hello Experts,
    Need your suggestions on the below requirement.....
    At every month end BPA or FRA will create a journal entry into SAP for stock provisioning.
    At the beginning of next month, the system should automatically reverses the entry made in previous month for stock provisioning.
    Now please advice me how to achieve this requirement,
    what are the customization settings to be done from FICO side, and what is the data required from the business to fulfill this requirement.
    Your suggestions willbe appreciated and rewarded.
    Thanks in Advance,
    Satya
    Edited by: gsnreddy on Nov 18, 2011 11:03 AM

    no automatic process available..
    need to do it manually only

  • Automatic invoice settlement

    Hi.
    Recently we have started issuing PO & invoices in foreign currencies. Payments are sent in the respective currencies as well. Whenever we do all of the aforementioned in the local currency, after running F110 automatic postings and invoice clearing takes place therefore we do not have to use Tcode F-44 to clear vendor accounts. Same doesn't apply for the invoices issued in the foreign currencies. Each and every time we have to run F-44 and settle accounts manually.
    I am guessing that along the way we have missed certain set up steps that would allow for automatic postings take place.
    Help is appreciated.
    Thank you.

    Hi,
    ERS - Automatic invoice settlement  is always refer the PO .
    so, you can post the Subsequent debit if price increase. because price dertermined from Purchase Order.
    But MRKO. the Price determined from Info record.
    If the Info record the how can we use subsequent debit option.
    also MRKO is the process to intimate to consignment vendor about the cunsumption only. it won't determine any price.
    Not possible to use subsequent functionality for MRKO.
    SAM
    Edited by: Saminathan Gopalan on Jun 23, 2010 3:04 PM

  • Automatic partial settlement of rebates.

    Hello,
    For automatic partial settlement, we have to run VB(7. My questions are  :-
    1) Iif we need to give our own amount to be partially settled , then how to do it in this T code. I cannot see any amount column in VB(7
    2) How can we partially settle a fixed amount (let's say 500 dollars) every month though VB(7
    regds

    Hi,
    I am also having the same issue. So can you kindly share the answer for the same thread posted by you.
    Best Regards
    Ankur 

  • Looking to automate the automatic reversal

    Currently we use the automatic reversal process for several of our journal entries in Oracle r12.  We have them set as auto reversal
    Category and then run the auto reversal process that creates the reversing journal entry in the next period.
    Is there any way to have this auto reversal process run automatically so that as soon as I upload and post an auto reversing journal entry, it will create and post the reversal in the next period for me?  we want to eliminate having to run the process manually and have it all work behind the scenes.
    Thanks in advance
    Jeff Donahue

    Please select all open PO according to the following conditions - select if the PO satisfies any one of the below conditions:
    1) Open Quantity is less than 10% of total quantity
    2) Delivery date is more than 3 months in the past
    3) Delivery completed indicator is set and delivery date is more than 6 months in the past.
    Then a manual decision is required. Best is to develop a report which will display the list and user can select and block from the report itself.
    Also, the 10%, 3 months, etc values are depending on the customer. You may want to modify these as suitable.
    Regards,
    Lakshman

  • T.Code for Automate Reversal of Inter Company documents

    Dear Friends,
    Can anyone please do let me know what is the T.Code and IMG path for automate reversal of Inter Company transactions. At present, i am posting in TC: FBU8. But it is for single document only. I have many I/C documents now i want to reverse all those documents. Is there any automate for this?
    Thanks
    Para

    Hi Para
    If you have many I/C documents, you can reverse all those at one stroke with the help of t.code F.80 by selecting a suitable option under the head "Cross-company code transactions"
    Regards

Maybe you are looking for