Automatic rotation change not working

What could be reasons why automatic rotation stopped working?
OF course I've checked that the hardware switch is off.. The location sensor is working, I know this because I have the background with floating circles and they react to rotation properly.
ANy ideas? Can some applications lock rotation, for example?
-dd

Hi aaaabug,
I am glad to hear your issue was resolved.
Brett L

Similar Messages

  • Automatic rotation is not working anymore

    My automatic rotation doesn't work anymore. Tried the side-button. Could it be the sensor is broken? Anybody an idea how to solve this other than having to send in Ipad for repair?

    I apologize if you have already checked this, but is your side-button set to "Rotation Lock" or "Mute"? The control for whichever one the button is not set to will show up in the multi-tasking bar (double-click the Home button and scroll to the far left, I believe). Assuming that's been checked, maybe a hard reset (home button + power button held until the Apple logo pops up, then released) or you can also try Settings>General>Reset>Reset All Settings.

  • Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

    Hi,
    I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
    The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
    Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
    Thank you in advance for any help,
    Łukasz
    Solved!
    Go to Solution.

    Hi Lukasz,
    Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
    Vince.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

    I have installed the latest HP Support Assistant for windows 10  and I have installed the updates  Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings  I have checked the box of "Allow the screen to auto-rotate"  In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424)  In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them  In User Account I have created a new user with password. Auto-rotate did not work in that user    But all these have not worked. Please find a solution for me.   About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work  

    Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

  • After ram upgrade automatic sleep is not working anymore

    Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
    I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
    Do anyone have an solution for this?
    Thanks

    Does your iMac recognize the new memory module?
    Yes.
    You might try reseating the module in its slot, and it
    would not be a bad idea to run Hardware Test from
    your install/restore DVD, just to be sure there is
    not an underlying hardware problem.
    Already done - no problems reported
    Is your new memory module of the same specifications as the
    stock module?
    Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
    Also, what are your settings for sleeping your iMac?
    5 min to sleep display, 10 min to sleep the mac
    One other thing you may wish to
    try is updating your system of OS X 10.4.6 (your
    profile indicates that your a running 10.4.5).
    Was updated to 10.4.6. I just forget to change the forums pref
    I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
    Nothing helped.
    Thanks

  • What's going on with ios8... Screen rotate does not work anymore, wifi doesn't work very well anymore and apps are crashing or running slow... Come on Apple sort this mess out

    ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
    first the the screen rotation is not working... Checked the settings and  lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
    the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly....  come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......

    Same issue here... iphone5S 64GB.  It's intermittent.  Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
    The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
    Rotation lock is disabled (tried toggling it on and off).  Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
    This issue only started happening after upgrading to iOS8.  I did a reset/restore through iTunes rather than an OTA upgrade.
    UPDATE - power-cycling the phone seems to fix it temporarily.

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • Automatic update does not work

    On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

    It will update eventually; there may have been availability problems on the update servers.

  • Photoshop SC5. What's the problem, Automate / Batch, did not work.

    Photoshop SC5. What's the problem, Automate / Batch, did not work.
    Message was edited by: roomus

    What OS?  Details?
    What error message?

  • Policies assigned to groups - membership changes not working

    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on group membership.
    If I change a user from one group to another group this change does not reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

    What you observed is the expected behavior.
    ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
    What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
    Try Updating the published policy to see if that works. From the docs:
    Updating a Published Policy
    Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
    >>>
    From: laurabuckley<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 12/15/2009 7:16 AM
    Subject: Policies assigned to groups - membership changes not working
    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on
    group membership.
    If I change a user from one group to another group this change does not
    reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT
    an option in my environment. All security assignments MUST happen at a
    group level.
    laurabuckley
    laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
    View this thread: http://forums.novell.com/showthread.php?t=395870

  • Transfer Order auto create for Posting Change not working

    Hello Gurus -
    When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm.  The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders.  Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
    It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
    Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
    Any help would be most appreciated.  Does it have something to do with a setting of quants?

    Hi,
    In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
    processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
    Hope this helps,
    Sinéad Curran

  • Blackberry Torch 9810 auto-rotat​ing not working !

    Hello guys my friend just bought a Blackberry Torch 9810 few weeks ago , only two weeks I think.
    And yesterday she found out that the auto-rotating doesn't work - that is the first time she tried to rotate the phone because she want to stream a video. 
    Hard or Soft reset has been done , reboot has been done , sliders not open , no rotation lock apps has been installed.
    Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
    If anyone knows that exact and working solution please help ~ 
    Thank you. 

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    Nainai wrote:
    Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
    It could be...any device designed, built, and operated by humans is subject to a defect rate greater than zero. But, at an internet distance, it is of course impossible to provide an actual diagnosis, especially if the problem indeed is hardware. Only in hand evaluation by a qualified technician can truly diagnose a hardware problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Portege M700 - Rotation Button Not Working In Tablet Mode

    I have a Portege M700 and when I turn it into tablet mode the rotation button quits working.
    It works when it in laptop mode.
    I have the rotation utility set to go into secondary landscape and its no longer switching and the button on the front of the screen will not switch it anymore either.
    I can go into the rotation software and rotate it manually.
    Any suggestions on how to get the button functioning again?
    Oh and I am running Vista Business with SP 2.
    Any help would be appreciated.

    Yes it does rotate it just wont rotate with the button once I turn it . also when I turn it to tablet mode it goes into portrait, I need it to go into secondary landscape. I made sure that the setting are set to secondary landscape and that the button is set to rotate. but it just wont. I have reinstalled the drivers for the rotation utility. any other ideas would be very helpful. thanks

  • 3D rotate tools not working correctly in PS 6.

    Using Dell, Windows7 with Nvidia GEForce GTX 260 card. Driver 296.10 (current) Rotate tools not smooth on only 1 axis for each X,Y,Z. Its like snapping to point on one axis and smooth on the other. Trying to figure out if its graphics card or Photoshop related? I have tried different card settings and different PS preference settings with no success at fixing the problem.

    Well the solution was a simple one for this and probably for many other 3D problems. When in 3D workspace just reset the work space and all is well.

  • BEx formula change not working in existing Analysis for Olap/Analysis for Excel reports

    Hello all,
    I posted this in Analysis for OLAP, but there has been no response so I'm hoping perhaps you BEx experts can help me.
    I had to modify a formula in a Bex query to have it calculate the results of the formula by summation.
    I checked the query using BEx Analyzer and it summed correctly.  If I create a new analysis for olap report, it sums correctly.
    If I modify an existing report, it does not pick up the change.  Existing Analysis for Excel reports also do not pick up the new summary calculation.
    Using the CMC, I edited the connection and reselected the Bex query, but that did not work either.
    Here it is working in the query:
    Line Discount is a formula with logic checking to see if "product list price total amount" is 0, set the line discount to 0; otherwise calculate it as "product list price total amount" - Net Sale.  So the total needs to sum of the line discounts (0+2820+2820 = 5640) and not be the Overall result "product list price total amount" - Overall Result "net sale" (13960-96720= -82760).
    Here it is in an existing Webi report - working:
    Here is what is happening in an existing Analysis for OLAP report - not working:
    I also tried to unselect Line Discount as a key figure from the existing report and reselect it, but that did not work.
    I'd like to find a solution so that all the reports that use this query won't have to be rewritten.
    I'm on BW 7.0 EP 1 SP 10 and BI 4.0 SP7 Patch 5.
    Thank you for your help,
    Susan

    Hi,
    Apply Exception aggregation on line discount formula--Exception aggregation as Total---Reference characteristic as Promega product.
    Make sure to refresh the webi report once after the changes has been done.
    If this does not work then you can apply summation calculation for that column at webi level as well.
    Regards,
    AL

Maybe you are looking for