Automatic rotation is not working anymore
My automatic rotation doesn't work anymore. Tried the side-button. Could it be the sensor is broken? Anybody an idea how to solve this other than having to send in Ipad for repair?
I apologize if you have already checked this, but is your side-button set to "Rotation Lock" or "Mute"? The control for whichever one the button is not set to will show up in the multi-tasking bar (double-click the Home button and scroll to the far left, I believe). Assuming that's been checked, maybe a hard reset (home button + power button held until the Apple logo pops up, then released) or you can also try Settings>General>Reset>Reset All Settings.
Similar Messages
-
After ram upgrade automatic sleep is not working anymore
Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
Do anyone have an solution for this?
ThanksDoes your iMac recognize the new memory module?
Yes.
You might try reseating the module in its slot, and it
would not be a bad idea to run Hardware Test from
your install/restore DVD, just to be sure there is
not an underlying hardware problem.
Already done - no problems reported
Is your new memory module of the same specifications as the
stock module?
Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
Also, what are your settings for sleeping your iMac?
5 min to sleep display, 10 min to sleep the mac
One other thing you may wish to
try is updating your system of OS X 10.4.6 (your
profile indicates that your a running 10.4.5).
Was updated to 10.4.6. I just forget to change the forums pref
I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
Nothing helped.
Thanks -
ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily. -
Automatic rotation change not working
What could be reasons why automatic rotation stopped working?
OF course I've checked that the hardware switch is off.. The location sensor is working, I know this because I have the background with floating circles and they react to rotation properly.
ANy ideas? Can some applications lock rotation, for example?
-ddHi aaaabug,
I am glad to hear your issue was resolved.
Brett L -
Auto rotation is not working anymore on my iPhone 5s
Today i woke up and grab my iphone to see if i get any new messages... so i opened my mail app and i turn it landscape mode the iphone screen doesn rotate at alll... and after a while it rotate itself... realy weird situation... I have installed the update 7.0.4 on my iphone... do anyone have this issue also..?
Kind regards
StevoHello Stevodevivo,
Thank you for the details of the issue you are experiencing with your screen not rotating on your iPhone. I recommend following the steps in the article below for the issue you described:
iOS: Screen does not rotate
http://support.apple.com/kb/ts3805
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?
Steven ~ Welcome to the Support Communities. The following may be useful for next time...
AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
iPad mini cases from Tech21
iPad mini screen protector from Tech21 -
Automatic Selected Item of List Builder Component Does not work (anymore)
Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan VriensHi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps.... -
Automatic approval workflow does not work anymore
Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
TimHi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears -
Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?
Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! -
Mac os 10.4.10 software update problem -- my mac does not work anymore :(
hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695 -
Iphoto 9.2.3 not working anymore
Since my last OS update in Lion my iphoto 11 is not working anymore - it crashes 5 seconds after displaying the window. I tried to reinstall it from iLife 11 without any success. I also created a new library. Here is my crash-log:
Process:
iPhoto [2419]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
9.2.3 (9.2.3)
Build Info:
iPhotoProject-629052000000000~1
Code Type:
X86 (Native)
Parent Process: launchd [296]
Date/Time:
2012-06-07 07:10:07.978 +0200
OS Version:
Mac OS X 10.7.4 (11E53)
Report Version: 9
Sleep/Wake UUID: 39AEBDA1-B723-4357-B6E5-5FF544AFE026
Interval Since Last Report:
69096 sec
Crashes Since Last Report:
7
Per-App Interval Since Last Report: 261 sec
Per-App Crashes Since Last Report: 6
Anonymous UUID:
DB6E41B9-12A3-4150-99E2-588E9FE26206
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000001
VM Regions Near 0x1:
--> __PAGEZERO
0000000000000000-0000000000001000 [
4K] ---/--- SM=NUL /Applications/iPhoto.app/Contents/MacOS/iPhoto
__TEXT
0000000000001000-0000000000d2a000 [ 13.2M] r-x/rwx SM=COW /Applications/iPhoto.app/Contents/MacOS/iPhoto
Application Specific Information:
objc_msgSend() selector name: release
objc[2419]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib
0x92d78d44 objc_msgSend + 20
1 com.apple.AppKit
0x95536209 -[NSCarbonMenuImpl dealloc] + 98
2 libobjc.A.dylib
0x92d7a54e _objc_rootRelease + 47
3 com.apple.AppKit
0x95535ef2 -[NSMenu setMenuRepresentation:] + 310
4 com.apple.AppKit
0x95535d19 -[NSMenu dealloc] + 69
5 libobjc.A.dylib
0x92d7a54e _objc_rootRelease + 47
6 libobjc.A.dylib
0x92d7bc58 (anonymous namespace)::AutoreleasePoolPage::pop(void*) + 404
7 com.apple.CoreFoundation
0x93097e05 _CFAutoreleasePoolPop + 53
8 com.apple.Foundation
0x9275f76e -[NSAutoreleasePool drain] + 131
9 com.apple.Foundation
0x92796c8b _NSAppleEventManagerGenericHandler + 300
10 com.apple.AE
0x9194d045 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 202
11 com.apple.AE
0x91936b67 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 43
12 com.apple.AE
0x91936a54 aeProcessAppleEvent + 253
13 com.apple.HIToolbox
0x9737ac66 AEProcessAppleEvent + 103
14 com.apple.AppKit
0x952da347 _DPSNextEvent + 1301
15 com.apple.AppKit
0x952d9942 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
16 com.apple.AppKit
0x952d5cb1 -[NSApplication run] + 911
17 com.apple.AppKit
0x95566bd9 NSApplicationMain + 1054
18 com.apple.iPhoto
0x000111ca 0x1000 + 65994
19 com.apple.iPhoto
0x00010659 0x1000 + 63065
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x97e4c90a kevent + 10
1 libdispatch.dylib
0x91570e10 _dispatch_mgr_invoke + 969
2 libdispatch.dylib
0x9156f85f _dispatch_mgr_thread + 53
Can you help with reinstalling?I created a new user and tried this too, but after launching iphoto, the program crashed after rotating the wheel for 10seconds. this is the report:
Process:
iPhoto [751]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
9.2.3 (9.2.3)
Build Info:
iPhotoProject-629052000000000~1
Code Type:
X86 (Native)
Parent Process: launchd [619]
Date/Time:
2012-06-15 11:59:16.619 +0200
OS Version:
Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:
104 sec
Crashes Since Last Report:
1
Per-App Interval Since Last Report: 46 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID:
DB6E41B9-12A3-4150-99E2-588E9FE26206
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000001
VM Regions Near 0x1:
--> __PAGEZERO
0000000000000000-0000000000001000 [
4K] ---/--- SM=NUL /Applications/iPhoto.app/Contents/MacOS/iPhoto
__TEXT
0000000000001000-0000000000d2a000 [ 13.2M] r-x/rwx SM=COW /Applications/iPhoto.app/Contents/MacOS/iPhoto
Application Specific Information:
objc_msgSend() selector name: release
objc[751]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib
0x92d78d44 objc_msgSend + 20
1 com.apple.AppKit
0x95536209 -[NSCarbonMenuImpl dealloc] + 98
2 libobjc.A.dylib
0x92d7a54e _objc_rootRelease + 47
3 com.apple.AppKit
0x95535ef2 -[NSMenu setMenuRepresentation:] + 310
4 com.apple.AppKit
0x95535d19 -[NSMenu dealloc] + 69
5 libobjc.A.dylib
0x92d7a54e _objc_rootRelease + 47
6 libobjc.A.dylib
0x92d7bc58 (anonymous namespace)::AutoreleasePoolPage::pop(void*) + 404
7 com.apple.CoreFoundation
0x93097e05 _CFAutoreleasePoolPop + 53
8 com.apple.Foundation
0x9275f76e -[NSAutoreleasePool drain] + 131
9 com.apple.Foundation
0x92796c8b _NSAppleEventManagerGenericHandler + 300
10 com.apple.AE
0x9194d045 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 202
11 com.apple.AE
0x91936b67 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 43
12 com.apple.AE
0x91936a54 aeProcessAppleEvent + 253
13 com.apple.HIToolbox
0x9737ac66 AEProcessAppleEvent + 103
14 com.apple.AppKit
0x952da347 _DPSNextEvent + 1301
15 com.apple.AppKit
0x952d9942 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
16 com.apple.AppKit
0x952d5cb1 -[NSApplication run] + 911
17 com.apple.AppKit
0x95566bd9 NSApplicationMain + 1054
18 com.apple.iPhoto
0x000111ca 0x1000 + 65994
19 com.apple.iPhoto
0x00010659 0x1000 + 63065
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x97e4c90a kevent + 10
1 libdispatch.dylib
0x91570e10 _dispatch_mgr_invoke + 969
2 libdispatch.dylib
0x9156f85f _dispatch_mgr_thread + 53
Thread 2:
0 libsystem_kernel.dylib
0x97e4b83e __psynch_cvwait + 10
1 libsystem_c.dylib
0x967eee78 _pthread_cond_wait + 914
2 libsystem_c.dylib
0x967eef7b pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation
0x927ed3c3 -[NSCondition waitUntilDate:] + 427
4 com.apple.Foundation
0x927b37d2 -[NSConditionLock lockWhenCondition:beforeDate:] + 294
5 com.apple.Foundation
0x927b36a6 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proxtcore
0x017715e2 -[XTMsgQueue waitForMessage] + 50
7 com.apple.proxtcore
0x01770590 -[XTThread run:] + 416
8 com.apple.Foundation
0x927bae25 -[NSThread main] + 45
9 com.apple.Foundation
0x927badd5 __NSThread__main__ + 1582
10 libsystem_c.dylib
0x967eaed9 _pthread_start + 335
11 libsystem_c.dylib
0x967ee6de thread_start + 34
Thread 3:
0 libsystem_kernel.dylib
0x97e49c22 mach_msg_trap + 10
1 libsystem_kernel.dylib
0x97e491f6 mach_msg + 70
2 com.apple.CoreFoundation
0x930969da __CFRunLoopServiceMachPort + 170
3 com.apple.CoreFoundation
0x9309fb04 __CFRunLoopRun + 1428
4 com.apple.CoreFoundation
0x9309f1dc CFRunLoopRunSpecific + 332
5 com.apple.CoreFoundation
0x9309f088 CFRunLoopRunInMode + 120
6 com.apple.Foundation
0x927674af -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 273
7 com.apple.proxtcore
0x017729cd -[XTRunLoopThread run:] + 509
8 com.apple.Foundation
0x927bae25 -[NSThread main] + 45
9 com.apple.Foundation
0x927badd5 __NSThread__main__ + 1582
10 libsystem_c.dylib
0x967eaed9 _pthread_start + 335
11 libsystem_c.dylib
0x967ee6de thread_start + 34 -
APEX2.0 on 9i not working anymore after installation of 10G database
Hello,
Up to last saturday I used APEX 2.0 on my 9i database (on Windows XP) without problems. I have several applications running and used them saturday for the last time.
Saturday I installed Oracle 10G Enterprise Edition on that same machine. I installed ONLY the software for the RDBMS, not even APEX. Later on I created my first 10g database via DBCA. Notice that I didn't do anything with APEX on that 10g database yet. I only installed the RDBMS software in a 10g home directory and created a database. That's all. No apex installed, nothing from the companion CD, only the RDBMS software in its own home.
Yesterday however, after a reboot of the machine, I could not use my applications running on the 9i database anymore: "the page cannot be found".
HELP!!!
What was changed by the installation of 10g that now causes that my applications cannot be accessed anymore? The 9i database runs OK, so that's not the problem.
I did already change the PATH settings, so that the 9i paths are checked before the 10.2 paths, but that did not solve the problem.
Has the installation changed something in the registry of XP perhaps?
Best regards,
Jan.
Best regards,
Jan.Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan. -
After installing Win7 Ultimate including all latest drivers downloaded from the Toshiba website, the following applications do not work anymore:
1) Toshiba Assist
The application (TInTouch.exe) loads but ends up with a blank screen.
2) TV button linked to TV
The StartLiveTV.exe application is loaded, it appears in TaskManager, but closes automatically not doing anything. When running Vista it launched Windows Media Center.
3) Dolby Button linked to Dolby
This should launch C:\Program Files\Dolby\Dolby Control Center\DolbyVistaConfig.exe but the application is gone and i cannot find a replacement on the Toshiba Website. (Latest sounddrivers are installed but Dolby application is missing)
Any thoughts on the 3 topics?Yep,
1) TVAP
i already removed the TVAP, downloaded it again and installed it again.
2) BIOS
I'm at the latest Bios, v2.20 -
Nokia Music not working anymore - crashes immediat...
Hi guys. I have been using Nokia Music standard version without any problems for several months in Lumia 820, but now the application is not working anymore. When I click the "Nokia Music" from the list of applications, the app opens ok, but after 2 seconds it closes automatically. I cannot select any of the functionalities (mix radio, create a mix etc...). There is no error message displayed, it just goes back to the application list menu. I have not installed any new apps to my phone recently. Phone restart is not helping. Problem occurs both when using WiFi and also with mobile data. As per Settings/PhoneUpdate my Lumia 820 is up-to-date. I'm located in Finland. Thanks
yes i have same problem when i open ovi music there is no response from ovi music
-
the e-print was always working fine for me.
the last weeks there were some problems, but when I logged in there was a problem with the HP-cloude.
Now I tried again, but e-print is not working anymore AND I can't log in anymore.
when I log in a see my page, but there is always the overlay of the login screen. See the screndump.
I installed new HP-software etc. but nothing helps.
How can I log in again?
Can't see this problem in the list???when I start with the URL: www.hpconnected.com I automaticly get the URL: https://h30495.www3.hp.com/c/46502/NL/nl/
then, when I log in I got always the screens as you can see in my firts question.
when I use google chrome with HPconnected.com I stay on the right URL. I can Log in correctly.
I see my printer with a message: Problem with printer look at the immages
second: when I look at the printerscreen and try to connect with the webserver I got the message: Printer can not connected to the server. I can use the printer normally at home. Printer is connected with cable to the network
Maybe you are looking for
-
i have a CAC card reader but it wont work when i try to use it to do some classes for work
-
Control queries in Info Broadcater 7.0
We are preparing to upgrade from BW 3.5 to 7.0. One of the features we will use is the creation of PDF files in the Information Broadcaster. I know that multiple .csv files can currently be created using the control query option. In 7.0, can PDF's
-
UDI Wizard - Capture/Restore USMT data Page Question
I'm having some trouble figuring out why on a new pc deployment after a pxe boot on my select target page of the UDI defaults to local and everything else is greyed out. I would like to be able to choose No Data to Restore or Network. I can get the
-
Hi All, I am new to ADF and working with some vendor to transform our in-house Oracle Form Application to ADF Application and we have more than 300 Oracle Forms to translate. Basically after the login page, we will have a main menu, and then from the
-
Audio not playing in Time line
I am using CC and just imported a project in to begin editing. I have been using Premiere since 2010 and never experienced this. In the project monitor everything plays fine but in the timeline I ge no audio. When I drag the clip in the audio will no