Automatic Route Determination in Route Planning

Hi,
Can any one please help us with issues/disadvantages in adopting Automatic Route Determination in Route Planning in FI-TV if anyone had implemented it?

Hi,
Please refer this link:
http://help.sap.com/saphelp_nw70/helpdata/de/43/44c35bd36157c0e10000000a155369/04_FI_EN.pdf
Regards,
Pramitha.

Similar Messages

  • Automatic Route detrmination

    Hi SD pro's,
    I have maintained all the steps of route determination and route stages. But, when i create a sales order, the route feild is not populated automatically. However, if i choose route and shipping type manually it works. Could someone help as how automatic route proposal takes place. It looks i am misiing some config somkewhere. Your help is appreciated. Thank you
    Regards
    Ranga

    hi
    ROUTE DETERMINATION
    Define Transportation Zone
    Path: Spro—Logistics Execution—Transportation—Basic Transportation Function---Routes—Route Determination—Define Transportation Zone.
    Maintain County and Transportation Zone for Shipping Point.
    Path: Under the Same Menu path--- Maintain County and Transportation Zone for Shipping Point.
    Select the Shipping point and enter the Country and Transportation Zone
    Define Transportation Groups.
    Path: Under the Same Menu path---Define Transportation Groups
    Maintain Route Determination
    Path: Under the Same Menu path--Maintain Route Determination.
    Go to Customer master data.
    In Address of General data. Enter the Transportation Zone id. and save
    U will get the route.
    Before this you have to do following things
    Step: 1
    Define Modes of Transport
    Path: Spro—Logistics Execution—Transportation—Basic Transportation Function---Routes—Define Routes—Define Modes of Transport.
    Step: 2
    Define Shipping Types
    Path: Under the Same Menu path---Define Shipping Types
    Select New Entries and Assign the Shipping Type (e.g. Road or Train) and Assign Mode of Transport (Mdtr) and Assign Shipping type Procedure group.
    Step: 3
    Define Transportation Connection Point
    Path: Under the Same Menu path--- Define Transportation Connection Point.
    Step: 4
    Define Routes and Stages.
    Path: Under the Same Menu path--- Define Routes and Stages.
    Select the New Entries and Enter the Details
    Then Select the Routes stages and define
    Step: 5
    Maintain Stages for all Routes.
    Path: Under the Same Menu path---Maintain Stages for all Routes.
    In the Ship-to-Party Adderss u need to maintain the
    Country and Transportation Zone
    Route is determined by checking the Departure Country
    & Departure Zone - Defined in Shipping Point
    Destination Country - Picked up from SHip to Party
    Details.
    Shipping Conditiona also picked up from SH
    Transport Group picked up from Material Master
    Make Sure that config of Depart country- Destination
    Country
    in that SC + Tran Group = Route
    Route Will be determined automatically if all the
    details are maintained correctly.
    go to this link you will get it all,.
    http://help.sap.com/saphelp_crm40/helpdata/en/dd/5607da545a11d1a7020000e829fd11/content.htm
    Regards

  • Shift planning - automatic proposal determination

    Hi Experts
    There are two shifts in our system, named A and B, and A'  daily work schedule is from 8 AM to 5 PM and B's is from 8 PM to 5 AM. there is no overlap between these two shifts. Now two persons with the same job and qualification work for these two shifts. On a specific day, person 1 plans to work for shift A and person 2  plans to work for shift B in planned time working schedule(infotype 0007).  Then I want to exchange thess two persons' shifts in PP61 using automatic proposal determination by returning different priority: for shift A, raise person 2's priority and for shift B, raise person 1's priority.
    Now I encounter problem in finishing this: when determining shift A's candidate, person 2 can not be selected although he has the same job and qualification with person 1, and the reason is there is no overlap between shift A's working time and person 2's planned working time(0007) .  How can I make person 2 selected even there is no overlap between the shift working time and planned working time?
    could any expert  help me out?
    Thanks a lot!
    shaoming

    Hi Shaoming -
    We are facing similar issue now in our implementation.
    Can you please let us know in case your issue was resolved.
    Thanks,
    Sanjay

  • Automatic Routing

    Hello All,
    We are using CRM 2005.
    We use rule modeler (context =order routing) when an agent clicks on Escalate Button, In automatic routing a set of predefined rules are defined where based on the conditions the routing takes place to the respective organization.
    We need that the automatic routing will work based on the "category 1" field in the ic web client service ticket.
    (we customizing the values in the SPRO --> define code groups and codes for catalogs, we display those values by the "Category modeler" )
    We want that the "Escalate" Button will work based on the on the value in "category 1" field.
    What is the relevant attribute for this requirement?
    Thanks in advance
    Tal

    Hello Tal,
    First of all, the category which is saved in the service transaction is the category of the lowest level that has been specified by the user. Therefore, the category which is stored in the document can be a category of any of the defined levels.
    The attribute 'ORDER_CATEGORY' of the context 'ORDER' corresponds to the category which has been save in the business transaction.
    You may consider the following possible solutions and see which one suits best your situation :
    (1) you could create a rule for every category from the category modeler and define the routing to the corresponding organization; of course, this will bring along an additional workload and maintenance of the rules;
    (2) you could try to harmonize the naming of the categories in the category modeler, for example :
    --> Level 1 --> Level 2 --> Level 3 --> Level 4
    --> CA_10
    > CA_1010
    > CA_1020
    >CA_102010
    > CA_10201010
    > CA_10201020
    >CA_102020
    --> CA_20
    > CA_2010
    > CA_2020
    --> CA_30
    > CA_3010
    > CA_3020
    In this way, it should theoretically be possible to define only 1 rule per level 1 node. For example, the condition 'contains "CA_10" should then be valid for all categories which are hierarchically dependent of category CA_10.
    (3) As already mentioned by Rohit, you can create a new attribute and build your own logic for it.
    I hope this helps.
    Kind regards
    Kristoff.

  • Automatic Routing in the Service Ticket

    Hi everybody.
    what's "automatic routing"?
    When i click on "escalation" in the service ticket, it's display a message "No rule found for automatic routing".
    With profile "ic_manager" i was create a roule but now i don't know where insert it in the customizing?
    Anyone has any idea about this ?
    Best regards.
    Virginia

    Hi Virginia,
    You need to pre-configure some rules based on which you route service tickets.Login with IC manager role in CRM 2007.There you go to Process Modeling->Rule Polciy->Create rules.
    Here you create rule for Context=Order Routing.
    Rule will be something like-If transaction type=service ticket and employee responsible = Virginia, then route to 'XYZ'.
    I have done similar thing for Complaints.
    Hope this helps!
    Regards,
    Rohit

  • 2 days automatically routed to the next approval level

    I would like to know, is there anyone accepted this pre-defined rule setting, the order will automatically route to the next level approval if 2 days limited is passed? I think Oracle should provide the flexibility on choosing such routing rule.

    We agree. This should be identical to the current functionality of Oracle's iProcurement.
    We also need to have the second approver layer related to category. This means that per category it should be possible to route to two different approvers:
    - budget responsible manager
    - technical manager
    For some products and services this is a must have. For example, when a buyer selects a computer some companies require that also the department responsible for the maintainance of computers in some companies should give their approval for such a purchase.
    Kind regards,
    Michel de Knoop
    KPN Xchange
    null

  • Rule modeler - Automatic Routing

    Hi
    I am working on WEB UI CRM 5.0
    I did all the necessary steps as describes at the blog:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c010e354-940b-2a10-28ad-fb63ec0c2744]
    but after the agent clicks on Escalate Button he get the massage "no rule found for automatic routing"
    what could be the reason for this massage?
    points will be rewarded.
    Thanks in advance
    Tal

    Hey Tal,
    Check with the following steps
    1.Create the context
    SAP IMG --> CRM -->E-Mail Response Management System -->Define Repository (Order -- Order routing)
    2.Add the BSP application in your favorates
    BSP application -->CRMM_ERM_RULES
    Open it
    Select order routing in the context drop down
    3.define the policy, rule, condition, actions
    Once done release the rule.
    This should get you through!!
    Regards
    Raj
    Do reward if helpful

  • Is there a script that it can make Overflow text automatically routed Next?(Not the main text frame)

    Is there a script that it can make Overflow text automatically routed Next？（Not the main text frame）
    when I run the scrip,Overflow text can auto Typesetting to the next page？
    thankS Supreme~

    Here's the script I use. Notice the complications getting the live area when other than rulers per spread is employed. The script automatically selects the final selection point in the story and moves to that page in the active window.
    //DESCRIPTION: Autoflow selected overset story
    (function(){
              if (app.documents.length > 0
                                  && app.selection.length == 1
                                  && app.selection[0].hasOwnProperty("parentStory")
                                  && app.selection[0].parentStory.overflows) {
                        app.doScript(fixOverset, undefined, app.selection[0].parentStory, UndoModes.entireScript, "Fix Overset");
              } else {
                        alert("There must be a selection that identifies the overset story.");
              function fixOverset(story) {
                        while (story.overflows) {
                                  var aDoc = story.parent;
                                  var lastTF = story.textContainers.pop();
                                  var lastPage = lastTF.parentPage;
                                  if (lastPage instanceof Page == false) {
                                            alert("Story ends on pasteboard; no action taken.");
                                            return;
                                  var master = lastPage.appliedMaster;
                                  var newPage = aDoc.pages.add(LocationOptions.after, lastPage);
                                  newPage.appliedMaster = master; // may not be necessary
                                  var liveArea = getLiveBounds(newPage);
                                  var newTF = newPage.textFrames.add({geometricBounds : liveArea, layer : lastTF.itemLayer});
                                  newTF.previousTextFrame = lastTF;
                                  if (newTF.insertionPoints.length == 0
                                                      && lastTF.insertionPoints.length == 0) {
                                            // allows for paragraph style with startParagraph on specific page side
                                            alert("Story is permanently overset.");
                                            return;
                        selectIt(story.insertionPoints[-1]);
              function getLiveBounds(page) {
                        var rO = page.parent.parent.viewPreferences.rulerOrigin;
                        var bounds = page.bounds;
                        if (rO == RulerOrigin.spreadOrigin) return returnBounds(page, bounds);
                        var width = bounds[3] - bounds[1];
                        if (rO == RulerOrigin.spineOrigin &&
                                            (page.side == PageSideOptions.leftHand ||
                                                      (page.side == PageSideOptions.rightHand &&
                                                                page.parent.pages.length > 1)) ||
                                  (rO == RulerOrigin.pageOrigin &&
                                            page.side == PageSideOptions.rightHand &&
                                                      page.parent.pages.length > 1)) {
                                            bounds[1] = bounds[1] - width;
                                            bounds[3] = bounds[3] - width;
                        return returnBounds(page, bounds);
                        function returnBounds(page, bounds) {
                                  return [
                                            page.marginPreferences.top,
                                            page.side == PageSideOptions.leftHand ?
                                                      bounds[1] + page.marginPreferences.right :
                                                      bounds[1] + page.marginPreferences.left,
                                            bounds[2] - page.marginPreferences.bottom,
                                            page.side == PageSideOptions.leftHand ?
                                                      bounds[3] - page.marginPreferences.left :
                                                      bounds[3] - page.marginPreferences.right
               function selectIt(theObj) {
                        var myZoom = app.activeWindow.zoomPercentage;
                        app.select(theObj);
                        app.activeWindow.zoom(ZoomOptions.fitPage);
                        app.activeWindow.zoomPercentage = myZoom;

  • No route planning in version 3.08 11wk41 b02

    Why the current version of nokia maps does not offer the route planning possibility? It is obvoius, that every user wants to plan his route, check the distance and choose the intermediary points! The level of the application is now childish, without many options. I choose the Nokia (C7) phone only because it offered an advanced, functional navigation with maps of the whole world. Symbian is not very exciting. With such a navigation as this one many users will definitely change their phones to Android devices. Will the route planning come back soon or is it possible to downgrade the maps apllication?

    conductor wrote:
    You talk about searching one place and not about route planning from one to another place, also with intermediary points. I Came back to version 3.07 and I am happy again. The question is if in Belle I can keep this version..?
    I suspect you'll get no choice with Belle - I belive 3.08 is now the "retail offering" so, I would have thought Belle will impose it.
    Sorry to say, but for me, personally, if that's the case, it will be a show-stopper for me upgrading to Belle on my N8.
    3.06 of maps has all the features I need and want, along with the configuration options for them. I'm not willing to sacrifice that, so won't be doing anything that imposes moving from 3.06 of maps, until the newer offering fixes / reinstates all they broke / removed.
    That to me is a real shame, for me, Nokia / OVI maps is the killer app for Nokia handsets for me. The way the product is going, if that's not addressed, and I can either easily continue with 3.06, or the newer version(s) sufficiently fixed to make them work and function as good, then I'll not be upgrading, and when my mobile contract is due for renewal, probably choose an Android handset.

  • Route plan question

    We have two offices that will be consolidated in to one office within the same city. The existing offices are in the same area code. The new office will be in a different area code.  According to ATT, the DIDs cannot be ported to the new office.
    Each office has its own Route Plan (in Call Manager) and voice gateway.
    For the new office, we will be installing a single Cisco 2851 for the VG/PRI and a Cisco 2951 for the data network (via MPLS).  We want the network and telecommunications ready before staff move in to the new office.
    My question is, can we or should we re-configure the existing route plans to reflect the new circuit/DIDs?  Should we create a new route plan?  What would be the best course of action for this move?
    I don't have a lot of experience with route plans and VG setups so we plan on engaging a contractor for this project.
    Any comment or suggestions you may have will be greatly appreciated.
    Thanks!

    Hey Richard,
    Personally, I would create another dialplan and then use the bat tool to move the phones from one dialplan to another as the changes are made.  If you're not experienced with doing this, I would concur with your decision to hire outside help to do this.
    On another note, you could easily use a single 2951 for both the voice gateway and the mpls router.  These isrs are made to serve double duty.
    hth,
    Rick

  • AXL Get Route Plan report?

    Any one have any tips on retrieving the route plan report via AXL?
    Also Im wondering if any one has tackled uploading a BAT file via AXL?

    Pick the developer guide that matches your CCM version:
    CCM6.x: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/6_0_1/cucm_devguide.html
    CCM5.1.x:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_1/nci/ccmdvCh1.html
    CCM 5.0x: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/5_0_4/ccmdev.html
    CCM 4.2:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/axl_prg/4_2_x/axlpg423.html
    CCM 4.1:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/axl_prg/4_1_x/axlpg413.html
    And a list of all programming guides for all CCM versions: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html

  • Route planning in sap

    hi experts,
                     i have a requiremnt for the FMCG industry, i need to implement the route planning for the fmcg company
    for example,
        manager will map the location for every sales person where the sales person has to go and meet the customer.
    any idea,any document,any link regarding route planning for FMCG company will be helpfull
    regards
    senya

    i am closing this thread

  • Route planning

    Hi, I have a problem to design a route planning algorithm. First, i want the panel to draw some circle when I click somewhere on the panel. the circle should be filled with color and there is a number represent on it, the number increase as i click more. like 1, 2, 3 and so on. After the panel contain all the circle I want, they are node to me, and when i click any two of them, a line can draw between them.
    I am new to Java 2D and swing, so can anyone give me some help here. Hope i make my problem clear

    Hi,
    Yes it is possible to plan the trucks to optimize the percentage utilization.
    to achieve this you have to configure capacity utilization cost in your planning profile. You have to use cost function in your planning profile with the correct cost setup relevant to your business scenario.
    To understand more in details you can refer to really nice blog by Thomas.
    http://scn.sap.com/community/scm/transportation-management/blog/2014/03/19/effective-optimization
    Regards,
    Tarun

  • N95 route planning not very optimal?

    Hi All,
    Well, I'm getting along fine with the N95 but I have noticed that the route planning isn't as good as I thnk it should be.
    The route I've noticed this most on is from St Ives in Cornwall back home to Reading. Both Google Maps, The AA's website and my old GPS mapping software (ViaMichelin's MapSonic) pick a route up the A30, M5 and M4 giving a travel time of between 4 and 5 hours.
    However, Nokia Maps gives me a route that avoids the M4 completely (it still uses a bit of the M5 though, so I have motorways "on" ;-) ) and with a time estimate of 8.5hrs!
    This seems way off :-(
    Does anyone know where I can check for a new version of the map software that hopefully addresses these deficiencies or if there are options in the program that can be used to tweak the speeds on various types of road?
    In Maps, Options > About tells me I'm using "v3.0 wk09 b02 OpenGL OpenBit MN"
    Is that the latest for the N95? If not, where can I look to get a newer version?
    I tried both http://www.smart2go.com/en/download/ and http://nokia.com/maps, but neither even listed the N95. Why is that?

    I have been using Smart2go on my N80 with an external gps. Works well but as you said, route planning is sometimes questionable. However, I think it is still pretty good for what it is. Another area that could be improved is the voice guidance which only seems to give instructions when you need to venture of the straight route, as in, it does not tell you to "go straight at the next traffic light".

  • Nokia 6288 route planning software

    Hello everybody,
    I am interested to find some route planning software for Nokia 6288 (Series 40 Operating System).
    At least I would like to know if exists.
    Because all I found were for Symbian (S60) operating system.
    I search for some software that can be deployed on the memory card and can work autonomously (without internet connection, etc). Only a GPS sensor must be attached to the phone.
    Does anybody knows of souch a software?
    Thanks in advance,
    Bogdan Olariu

    No - the are no route planning software for Series 40 JAVA phones as far as I know. Mobile Gmaps is the best there is.
    JAVA apps are limited in size, typically no bigger than 512KB - so all map data and so on needs to be pulled over GPRS. Placing map/route data into the JAVA app is thus not possible as it will never fit into 512KB.

Maybe you are looking for

  • Delete files in Open Recent Files list - CS3

    Is it possible to delete single files in the "Open Recent Files" list or specify how many recently opened files are be shown? I am using CS3 (5.0.3). Thanks

  • Not able to submit a pet on the seller screen of Petstore 2.0...

    Hi, If all other parts of the application works correctly, it could be a library conflict. If the portal container is deployed or you have an early version of Apaches commons fileupload libraries in your system classpath, then submitting a pet will f

  • WebService not initialized

    I am experimenting with WebServices, when i used form a JSP/Servlet client the webservice is working fine: package org.me.calculator.client; import com.delunasaenz.scoreboard.Game; import com.delunasaenz.scoreboard.ScoreboardWS; import com.delunasaen

  • User defined Returned Goods form with sequential numbers

    My customer is going to be using the Service module in Business One. We want to be able to create a Return Goods document we can send to the customer. We looked at using the Returns form but because we are using serial numbers it forces us to create

  • HDV support in elements8 ?

    hello, supports elements8 the m2t-data-format and a video file export to a resolution till 1920x1080 ? thanks for every post