Automatic Route detrmination

Hi SD pro's,
I have maintained all the steps of route determination and route stages. But, when i create a sales order, the route feild is not populated automatically. However, if i choose route and shipping type manually it works. Could someone help as how automatic route proposal takes place. It looks i am misiing some config somkewhere. Your help is appreciated. Thank you
Regards
Ranga

hi
ROUTE DETERMINATION
Define Transportation Zone
Path: Spro—Logistics Execution—Transportation—Basic Transportation Function---Routes—Route Determination—Define Transportation Zone.
Maintain County and Transportation Zone for Shipping Point.
Path: Under the Same Menu path--- Maintain County and Transportation Zone for Shipping Point.
Select the Shipping point and enter the Country and Transportation Zone
Define Transportation Groups.
Path: Under the Same Menu path---Define Transportation Groups
Maintain Route Determination
Path: Under the Same Menu path--Maintain Route Determination.
Go to Customer master data.
In Address of General data. Enter the Transportation Zone id. and save
U will get the route.
Before this you have to do following things
Step: 1
Define Modes of Transport
Path: Spro—Logistics Execution—Transportation—Basic Transportation Function---Routes—Define Routes—Define Modes of Transport.
Step: 2
Define Shipping Types
Path: Under the Same Menu path---Define Shipping Types
Select New Entries and Assign the Shipping Type (e.g. Road or Train) and Assign Mode of Transport (Mdtr) and Assign Shipping type Procedure group.
Step: 3
Define Transportation Connection Point
Path: Under the Same Menu path--- Define Transportation Connection Point.
Step: 4
Define Routes and Stages.
Path: Under the Same Menu path--- Define Routes and Stages.
Select the New Entries and Enter the Details
Then Select the Routes stages and define
Step: 5
Maintain Stages for all Routes.
Path: Under the Same Menu path---Maintain Stages for all Routes.
In the Ship-to-Party Adderss u need to maintain the
Country and Transportation Zone
Route is determined by checking the Departure Country
& Departure Zone - Defined in Shipping Point
Destination Country - Picked up from SHip to Party
Details.
Shipping Conditiona also picked up from SH
Transport Group picked up from Material Master
Make Sure that config of Depart country- Destination
Country
in that SC + Tran Group = Route
Route Will be determined automatically if all the
details are maintained correctly.
go to this link you will get it all,.
http://help.sap.com/saphelp_crm40/helpdata/en/dd/5607da545a11d1a7020000e829fd11/content.htm
Regards

Similar Messages

  • Automatic Routing

    Hello All,
    We are using CRM 2005.
    We use rule modeler (context =order routing) when an agent clicks on Escalate Button, In automatic routing a set of predefined rules are defined where based on the conditions the routing takes place to the respective organization.
    We need that the automatic routing will work based on the "category 1" field in the ic web client service ticket.
    (we customizing the values in the SPRO --> define code groups and codes for catalogs, we display those values by the "Category modeler" )
    We want that the "Escalate" Button will work based on the on the value in "category 1" field.
    What is the relevant attribute for this requirement?
    Thanks in advance
    Tal

    Hello Tal,
    First of all, the category which is saved in the service transaction is the category of the lowest level that has been specified by the user. Therefore, the category which is stored in the document can be a category of any of the defined levels.
    The attribute 'ORDER_CATEGORY' of the context 'ORDER' corresponds to the category which has been save in the business transaction.
    You may consider the following possible solutions and see which one suits best your situation :
    (1) you could create a rule for every category from the category modeler and define the routing to the corresponding organization; of course, this will bring along an additional workload and maintenance of the rules;
    (2) you could try to harmonize the naming of the categories in the category modeler, for example :
    --> Level 1 --> Level 2 --> Level 3 --> Level 4
    --> CA_10
    > CA_1010
    > CA_1020
    >CA_102010
    > CA_10201010
    > CA_10201020
    >CA_102020
    --> CA_20
    > CA_2010
    > CA_2020
    --> CA_30
    > CA_3010
    > CA_3020
    In this way, it should theoretically be possible to define only 1 rule per level 1 node. For example, the condition 'contains "CA_10" should then be valid for all categories which are hierarchically dependent of category CA_10.
    (3) As already mentioned by Rohit, you can create a new attribute and build your own logic for it.
    I hope this helps.
    Kind regards
    Kristoff.

  • Automatic Route Determination in Route Planning

    Hi,
    Can any one please help us with issues/disadvantages in adopting Automatic Route Determination in Route Planning in FI-TV if anyone had implemented it?

    Hi,
    Please refer this link:
    http://help.sap.com/saphelp_nw70/helpdata/de/43/44c35bd36157c0e10000000a155369/04_FI_EN.pdf
    Regards,
    Pramitha.

  • Automatic Routing in the Service Ticket

    Hi everybody.
    what's "automatic routing"?
    When i click on "escalation" in the service ticket, it's display a message "No rule found for automatic routing".
    With profile "ic_manager" i was create a roule but now i don't know where insert it in the customizing?
    Anyone has any idea about this ?
    Best regards.
    Virginia

    Hi Virginia,
    You need to pre-configure some rules based on which you route service tickets.Login with IC manager role in CRM 2007.There you go to Process Modeling->Rule Polciy->Create rules.
    Here you create rule for Context=Order Routing.
    Rule will be something like-If transaction type=service ticket and employee responsible = Virginia, then route to 'XYZ'.
    I have done similar thing for Complaints.
    Hope this helps!
    Regards,
    Rohit

  • 2 days automatically routed to the next approval level

    I would like to know, is there anyone accepted this pre-defined rule setting, the order will automatically route to the next level approval if 2 days limited is passed? I think Oracle should provide the flexibility on choosing such routing rule.

    We agree. This should be identical to the current functionality of Oracle's iProcurement.
    We also need to have the second approver layer related to category. This means that per category it should be possible to route to two different approvers:
    - budget responsible manager
    - technical manager
    For some products and services this is a must have. For example, when a buyer selects a computer some companies require that also the department responsible for the maintainance of computers in some companies should give their approval for such a purchase.
    Kind regards,
    Michel de Knoop
    KPN Xchange
    null

  • Rule modeler - Automatic Routing

    Hi
    I am working on WEB UI CRM 5.0
    I did all the necessary steps as describes at the blog:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c010e354-940b-2a10-28ad-fb63ec0c2744]
    but after the agent clicks on Escalate Button he get the massage "no rule found for automatic routing"
    what could be the reason for this massage?
    points will be rewarded.
    Thanks in advance
    Tal

    Hey Tal,
    Check with the following steps
    1.Create the context
    SAP IMG --> CRM -->E-Mail Response Management System -->Define Repository (Order -- Order routing)
    2.Add the BSP application in your favorates
    BSP application -->CRMM_ERM_RULES
    Open it
    Select order routing in the context drop down
    3.define the policy, rule, condition, actions
    Once done release the rule.
    This should get you through!!
    Regards
    Raj
    Do reward if helpful

  • Is there a script that it can make Overflow text automatically routed Next?(Not the main text frame)

    Is there a script that it can make Overflow text automatically routed Next？（Not the main text frame）
    when I run the scrip,Overflow text can auto Typesetting to the next page？
    thankS Supreme~

    Here's the script I use. Notice the complications getting the live area when other than rulers per spread is employed. The script automatically selects the final selection point in the story and moves to that page in the active window.
    //DESCRIPTION: Autoflow selected overset story
    (function(){
              if (app.documents.length > 0
                                  && app.selection.length == 1
                                  && app.selection[0].hasOwnProperty("parentStory")
                                  && app.selection[0].parentStory.overflows) {
                        app.doScript(fixOverset, undefined, app.selection[0].parentStory, UndoModes.entireScript, "Fix Overset");
              } else {
                        alert("There must be a selection that identifies the overset story.");
              function fixOverset(story) {
                        while (story.overflows) {
                                  var aDoc = story.parent;
                                  var lastTF = story.textContainers.pop();
                                  var lastPage = lastTF.parentPage;
                                  if (lastPage instanceof Page == false) {
                                            alert("Story ends on pasteboard; no action taken.");
                                            return;
                                  var master = lastPage.appliedMaster;
                                  var newPage = aDoc.pages.add(LocationOptions.after, lastPage);
                                  newPage.appliedMaster = master; // may not be necessary
                                  var liveArea = getLiveBounds(newPage);
                                  var newTF = newPage.textFrames.add({geometricBounds : liveArea, layer : lastTF.itemLayer});
                                  newTF.previousTextFrame = lastTF;
                                  if (newTF.insertionPoints.length == 0
                                                      && lastTF.insertionPoints.length == 0) {
                                            // allows for paragraph style with startParagraph on specific page side
                                            alert("Story is permanently overset.");
                                            return;
                        selectIt(story.insertionPoints[-1]);
              function getLiveBounds(page) {
                        var rO = page.parent.parent.viewPreferences.rulerOrigin;
                        var bounds = page.bounds;
                        if (rO == RulerOrigin.spreadOrigin) return returnBounds(page, bounds);
                        var width = bounds[3] - bounds[1];
                        if (rO == RulerOrigin.spineOrigin &&
                                            (page.side == PageSideOptions.leftHand ||
                                                      (page.side == PageSideOptions.rightHand &&
                                                                page.parent.pages.length > 1)) ||
                                  (rO == RulerOrigin.pageOrigin &&
                                            page.side == PageSideOptions.rightHand &&
                                                      page.parent.pages.length > 1)) {
                                            bounds[1] = bounds[1] - width;
                                            bounds[3] = bounds[3] - width;
                        return returnBounds(page, bounds);
                        function returnBounds(page, bounds) {
                                  return [
                                            page.marginPreferences.top,
                                            page.side == PageSideOptions.leftHand ?
                                                      bounds[1] + page.marginPreferences.right :
                                                      bounds[1] + page.marginPreferences.left,
                                            bounds[2] - page.marginPreferences.bottom,
                                            page.side == PageSideOptions.leftHand ?
                                                      bounds[3] - page.marginPreferences.left :
                                                      bounds[3] - page.marginPreferences.right
               function selectIt(theObj) {
                        var myZoom = app.activeWindow.zoomPercentage;
                        app.select(theObj);
                        app.activeWindow.zoom(ZoomOptions.fitPage);
                        app.activeWindow.zoomPercentage = myZoom;

  • Automatic route

    Hi Guys,
      A very good morning to you all. I was assigned to a task which is related to automatic routing. In that task I was populated the required data in to one internal table. Now spec contains the following point which I am not able to catch the exact condition. Please help me out in this situation by giving your valuable suggestions and details.
    •     If the total weight of the selected deliveries is over and above the maximum allowed weight in an LTL truck, reduce the number of deliveries in such a way that the maximum allowed weight is achieved and the left out deliveries are of minimum weights. Thus, eliminating deliveries out from the list which is above the max weight limit should first target the lightest delivery and so on.
    Your help will be greatly appreciated. Please let me know for further details.
    Regards,
    Ravi.

    Thanks.....
    Ravi..

  • Automatically route determination for Normal PO - Inbound delivery

    dear MM experts,
    we are successful route determination for STO & SO, now we wud like to know whether normal PO, route automatically determined or not.
    -while creating PO, we don't find the shipping tab, unlike in sto,
    or
    -while creating inbound delivery
    Please help in giving solution if any one as already implemented
    thanx in advance
    srihari

    Hi, did you solve it? I am having the same problem.

  • Automatic Route Selection at sales order level

    Hi gurus,
    How do I automatically select a route I have created at sales order level for a given client?
    I want to avoid adding the route for each line item manually.
    Regards
    Chris

    Problem solved

  • Automatic route determination in PO

    hello guru's
      iam working on auto route determination ,as iam trying to do STO from 1 RSO to other RSO i need Route determinatio to take place in PO automatically  i tried working wit transportation zone shipping condition,customer & material master everythjing seems to be fine but still iam unable to get route determination automatically into my PO.
    wat else can b done to get route determination
    please help thanks in advance
    prashant belgaonkar

    Hello,
         Seems everything is in line & it should determine route from tx:OVRF - if the given data is available in PO.
    just to re-check,
    Shipping Condition - From Internal Customer ( Receiving Plant)
    Transportation Group - Check in MMR - sales plant general data ( Here Plant should be Supplying Plant)
    Hope you have done this work around, but would like to re-confirm the same
    Regards,
    Reazuddin MD

  • Slatebook x2 and Slate 7 automatically routing audio to headset

    Hello, I am a software architect at HP leading the development of HP MyRoom application for Android. In the application, we let the user explicitly select speaker, headset, or Bluetooth as the audio source. If you select "speaker," the audio source will always be speaker even if you connect a headset to the device.  I have verified this logic works on a number of tablets and phones including ones from Nexus, Asus, and HP. HP Slate 10, HP Slate 21, etc. seem to work fine. However, on HP Slate 7 as well as on Slatebook x2, if you connect a headset, the audio automatically gets routed to the headset. It seems I have no control over it. I am hoping someone from R&D team can contact me. Funny I couldn't find any contact information within HP intranet site. Regards,Pradeep

    Could you provide the complete model name like: Hp Slate 7 Voicetab, then I will send you a private message for the contact for privacy purposes. 

  • Automatic route determination for sales order

    Defined
    Transportation Zone  sold to party -0000000002
    Shipping conditions -01
    Transportation group in Material master -0001
    Transportation zone ship to party - 0000000003
    Assignment made -
    Dep country zone -0000000002
    Dest country zone -0000000003
    Sc -01
    Transportaion group -0001
    route -zroad
    departure zone and destination zone is assigned to respective customer masters. and above assignment is made in IMG for route determination for order. But when i create the sales order route is not getting determined..i wnet to most of the threads in this form..but could not find a thread for route determination for sales order

    Aju Joseph
    -Do the shipping point detremination  in OVL2.
    -In Route Determination- Maintain Country & Transportation Zone For Shipping Point
    -Here you will find the Shipping point  whatever you have created in Enterprise Structure  which is in grey i.e you cannot change.
    -Just assign the departure zone which you have created in Transportation zone-000000002 to required shipping point & save it.
    --Raise the sales order & check the output
    Let me know if your problem is solved
    Regards
    Pradeep

  • Automatic account detrmination

    hi sap gurus
    what are the standard transaction keys in automatic account determination in obyc
    for revenue frm price difference
    and expense from price difference
    also income form price difference
         and expense from price difference
    alsu tell posting key to be used for both
    handsome points will be given . its urgent

    Hi
    This is depends upon transaction that causes price differences.
    Examples with transaction keys:--
    1.Expense/revenue from consumption of consignment material (AKO):-
    This transaction is used in Inventory Management in the case of withdrawals from consignment stock or when consignment stock is transferred to own stock if the material is subject to standard price control and the consignment price differs from the standard price.
    2.Expenditure/income from transfer posting (AUM):-
    This transaction is used for transfer postings from one material to another if the complete value of the issuing material cannot be posted to the value of the receiving material. This applies both to materials with standard price control and to materials with moving average price control. Price differences can arise for materials with moving average price if stock levels are negative and the stock value becomes unrealistic as a result of the posting. Transaction AUM can be used irrespective of whether the transfer posting involves a transfer between plants. The expenditure/income is added to the receiving material.
    3.Price differences (PRD) :-
    Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price). Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account. Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system: - None for goods and invoice receipts against purchase orders - PRF for goods receipts against production orders and order settlement - PRA for goods issues and other movements - PRU for transfer postings (price differences in the case of external amounts)
    4.Revenue/expense from revaluation (UMB) :-
    This transaction/event key is used both in Inventory Management and in Invoice Verification if the standard price of a material has been changed and a movement or an invoice is posted to the previous period (at the previous price).
    regards
    rb

  • Route not determing automatically at sales order level for some sales order

    Dear All ,
    Route not determing automatically at sales order level  for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
    I have checked all the forums but didn't find any solution for the same.
    Looking for your inputs .
    Thanks inadvance
    Regards
    Venkat

    Hi
    1. Copare the Routes which are Automatically determined and which are not automatically determined
    2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
    SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
    Thanks
    RB

Maybe you are looking for

  • Can't run multiple instances on same page!

    Hi, Since I got no response on the shadowbox forums after 2 weeks, I thought it's worth to post it here and hope someone can help me out. Note: This is also related on non-joomla pages. I've tested it on plain html as well (by Dreamweaver) and get th

  • How to specify URL in server.xml of Tomcat

    Hi Everybody, I need help.How to specify url in the server.xml. I developed one application in the Tomcat 3.3.I want to access the by entering uri(like:http:test.com). What are tags to enter in the server.xml. Right now i am accessing like:http://loc

  • Need help on Info Cube.

    Hi All,   I have a query on designing the Cube. My Requirement : I have Standard ODS and the keyfigures in ODS are 1. Service Order Number. 2. User Status. 3. User Date. 4. User Time Data field in ODS is 1. Active Flag. Active flag gives the informat

  • Get the inherited status of attributes

    Hi All,, I have a requirement as below: o     Every time the program reaches a line where the attribute ID and/or position ID is different from the previous line or for the first line, all attribute values for the dedicated position and attribute ID

  • ClassLoader for plugins

    Hi there, I have an application where I would like to instantiate plugin classes. Now, for reasons that would be a bit too lengthy to explain right now I want each of these plugins to have their own classloader (i think, see the rest). Basically I wa