Automatic Schedule Lines for SA

Dear Gurus,
Is it possible to create automatic Schedule lines for Subcontracting Scheduling Agreements????
cheers

Hi
It is possible to create SA for item catgory L. No specific configurational setting is required.
Pls check
Regards,
Raman

Similar Messages

  • How to put schedule lines for one year  in a schedule line agreement

    dear all
    thanks for the support till now from the forum
    now i need some seetings by which the scheduling agreement will autoumatically take the schedule line for one year automatically
    in my client we are getting open PO so
    we have to make one agreement acording to that PO and thats for one year
    and this one yr will have same quantity to be produced everyday
    means 12nos of material every day for 12 month and this will be for every day
    and as per that it should generate a sales order.i need to put schedule line automatically not mannually one by one for each date.so wat is the settingand how to reffer this scheduling agreement we can produce sales order.
    please help
    subrat
    Message was edited by:
            subrat panda

    Dear Subrat,
    you cannot create a yearly schedule line in the scheduling agreement. It is not possible due to format restrictions of the date field. But what you can do is the follows (it is the modification, but it should work with the help of user-exits):
    1. You can split the year schedule line to the monthly schedule lines. There are two ways to do it. If you apply the DELINS IDOC, then you can do it already during transfer of the data to the application (itr is the best way). Here you can use, for example, user-exit USEREXIT_ZUORDNEN_IDOCS (include LVED4FZZ) or customer function EXIT_SAPLVED4_002, called from the subroutine USEREXIT_DYNPRO (Include LVED4F0U). Alternatively, you can use the user-exit USEREXIT_MOVE_FIELD_TO_VBEP (Include MV45AFZZ) within the call transaction, then it will work also in the dialog case.
    2. After getting the monthly schedule lines, you can create a planning delivery schedule, where you can split mothly schedule lines automatically to daily schedule lines according to the customer factory calender.The settings for generation of planning delivery schedules can be found under:
    Customizing SPRO: Sales and Distribution => Sales => Sales Documents => Scheduling Agreements with Delivery schedules => Maintain Planning Delivery Sched. Instruct./Splitting Rules
    It is the only ways, how you can reach your aim. I hope, this information will help you further.
    Kind Regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • MRP To Generate SCHEDULE LINES for Scheduling Agreement

    Hi
    I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
    1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
    2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
    3. Create Scheduling agreement using ME31L
    4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
    During Run MRP for the material.the below details entered///
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Schedule lines 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 1 Determination of Basic Dates for Planned
    Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
    MRP1:
    MRP Procedure: PD
    MRP Group: 0000 (External Procurement only)
    Lot Size: EX (Lot For Lot)
    MRP2:
    Procurement Type: F
    Sched Margin Key: 000
    MRP3:
    Avilablity chec: 02 (Individual requirement)
    MRP: 4
    Nil

    Raj,
    Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
    Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
    rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
    HOPE IT WILL WORK
    Regards:
    Poision

  • To generate Schedule lines for scheduling Agreement when MRP is run.

    Hi,
    Please help advise on my following requirement:
    When I run the MRP for 'Single Item - Multi level' (MD02) for a material, I want MRP to generate delivery schedule lines for that material in Scheduling agreement.
    Please advise as to how i can go about with this.
    Regards,
    Manju

    Hi Manju,
    For this you need to set creation indoactor for planning run in SPRO.
    The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
    Traction code is omi8. Hope this will help you.
    Cheers
    Ravi

  • Schedule Lines for Sales BoM Material

    Hi All,
    When i trying to maintain the multiples schedule lines for the Sales BoM Material(Both Header and Item), system is not allowing to maintain it.Please guide me how to achieve this?

    Hi,
    "Schedule Line allowed" is enabled at Item category. The Requirement is If we have multiple schedule lines for BoM Line Item, we are not able to maintain. Suppose the Order Quantity is 50 Units and we need schedule line of 10 Quantity each month. We are not able to maintain. System takes the complete 50 quantity and do the availability check and proposes the availablity Date. We are not able to maintain different schedules manually.

  • Schedule lines for outbound process

    hi
    can anyone tell me what is schedule lines for outbound process
    thanks

    thanks charlie for your answer can you pl tell me what does it means configured delivery types, item categories and schedule line for outbound processes.
    thanks

  • Schedule lines for schedule agreement

    Hi,
    I need get all schedule lines for schedule agreement (all schedule lines = all visible in tab analysis u2013 all lines for all forecast dlv. sched).
    I check table VBEP and VBEH and I canu2019t find all items.
    Could you help?
    Thanks in advance,
    E

    Hi Manju,
    For this you need to set creation indoactor for planning run in SPRO.
    The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
    Traction code is omi8. Hope this will help you.
    Cheers
    Ravi

  • Schedule Lines for TATX items

    I know that by default, schedule lines are not active for TATX (text) items in sales documents.
    I'm also pretty sure that this option is not valid even if you activate it in the IMG.
    Can anybody tell me:
    1) Is my statement above correct ?
    2) If so, why are schedule lines not allowed for TATX items.
    3) Is there any way around this limitation ?

    Thanks for your input so far.  Perhaps you'll be kind enouth to stick with me a little more.
    Let me expalin what my user is doing:
    In the IMG configuration of our system, schedule lines were activated for TATX item category, however it still does not work as expected.
    User enters a quantity of deliverable product on line item 1 with item category of TAN.
    User creates a delivery schedule for line item 1 using schedule lines (category CP).
    For line item 2, user wants to send "DOCUMENTATION" for each schedule line.
    "DOCUMENTATION" exists in our SAP system as a material master, but no stock exists.
    User enters a quantity of DOCUMENTATION on line item 2 with item category TATX.
    User creates delivery schedule for line item 2.  (auto populates sched category CT).
    When delivery is created, the first schedule line for both items works fine.
    For subsequent deliveries, line item 1 continues to work, but the line item 2, DOCUMENTATION material does not show up.
    I suspect that we are trying to use the TATX item category differently than it was intended, and that some other method would be a better fit for making deliveries of non-stocked material.

  • Unable to enter multiple Schedule lines for BOM material in Sales Order

    Hi All,
    We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
    The schedule lines are greyed out, user was able to add schedule lines earlier.
    I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
    Please provide a solution for this.
    PFB link in which similar situation posted in this community but the final resolution method is not discussed.
    http://scn.sap.com/message/13201504#13201504
    Regards,
    Samiksh

    Hi Samiksh,
    Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
    or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
    With regards
    S.Siva

  • Multiple Schedule Lines for Individual Qty in Standard Order

    Hello All,
    I have a Client Requirement to Set up the Standard Order for a Material which will be sold on Single Quantity every Month.
    This will have to occur from the same Order. For this Multiple Schedule Lines are required to be generated as per Monthly Delivery Schedule.
    I know this functionality comes under Scheduling Agreements where we can deliver goods as per confirmed Schedule Lines for the Month.
    But Client Requirement is to set up this functionality in Standard Order Only as setting up scheduling agreements calls for mapping of New Order Types which is not feasible.
    So Can you provide with your valuable Inputs as to whether this can be possible through Standard Order in the system.
    Looking forward to your esteemed reply!!
    Warm Regards,
    Onkar Khedekar

    Dear Onkar:
    If you don't want to use Schedule agreements, you can enter several schedule lines for each item in "Schedule line" tab at  item level.
    Enter in this tab each schedule line per month.
    But be aware which date you enter becuase this requirement will be transfered to MRP.
    Check it and revert.
    Jose Antonio Martinez

  • SA Schedule lines for requirements within PTF

    Hello Gurus,
    I have a question that you can surely help me with.
    I have setup a scheduling agreement for a material, and with the source list setup the MRP now successfully generates schedule lines for all requirements that are outside of the planning time fence. However, if I put a requirement inside the planning time fence, then MRP does not create a schedule line just outside the PTF to cover that requirement, instead it creates a planned order just outside the PTF (or a purchase requisition if I change the "Create Purch. req." MRP control parameter).
    Why does it not create a delivery schedule line? The validity of agreement is set to 1st of april, so it is defined will in the past. The target quantity on the scheduling agreement is well above the current scheduled quantity.
    Thank you for any suggestions on this issue. I am sure it is just me who is being an MRP ignorant.

    Check the validity date of your Source List. It may be that it is outside the time frame of your requirements.
    Try setting it up to say, January 1st of this year, see what happens.
    Award points if useful.

  • Fields update in "Schedule Lines for FRC sched." in a scheduling agreement

    May I know how the following fields in the "Schedule Lines for FRC sched." section in a scheduling agreement are being updated?
    We have already a new inbound delivery with goods receipt (last June 1, 2010) but the following fields still show the previous inbound delivery details:
    For example:
    Date of last del. 08.10.2009
    Last d. note no. 91011
    Last GR 21.10.2009
    Last GR qty. 54.500
    I wish I can show some screenshots here.
    Thanks a lot in advance for your answers.

    Hi Sravan,
    As per my view point, this is standard SAP behaviour. System will generate PR only in case of external operation.
    If you go to OPL8 (Order type dependent parameters) for your respective order type & plant combination you have option of maintaining setting related to PR only and there is no option of using scheduling agreement or generating schedule lines.
    I don't see any possibility to use scheduling agreement using to have schedule lines for external operation.
    Regards,
    Tejas

  • Schedule lines for an external operation in a production order

    Hi All,
    I have an external operation defined in a production order and a scheduling agreement is assigned to it in the Routing operation details.  Now, i want to generate schedule lines when a production order created but the system always generating a purchase requisition.  Do we need something to be configured in the background?  Please help!
    The idea is to have the goods receipt done against the same agreement always.
    Regards,
    Sravan

    Hi Sravan,
    As per my view point, this is standard SAP behaviour. System will generate PR only in case of external operation.
    If you go to OPL8 (Order type dependent parameters) for your respective order type & plant combination you have option of maintaining setting related to PR only and there is no option of using scheduling agreement or generating schedule lines.
    I don't see any possibility to use scheduling agreement using to have schedule lines for external operation.
    Regards,
    Tejas

  • No Schedule Lines for Delivery upto selected date

    Hi,
    I have a scenario for Repairs order. Following are the steps of my scenario:
    1. Create a Repair Order.
    2. Create return delivery to recieve the faulty item.
    3. Create Outbound Delivery to send a loaner item to customer (This item would be returned once the returned item is repaired and sent to customer)
    4. Send the item after repairing.
    5. Receive the loaner item.
    When I am trying to create outbound delivery for Loaner item, i am getting an error "No Schedule Lines for Delivery upto selected date".
    I have checked and verified the schedule line date.
    I have checked for Confirmed Quantity.
    Below are the screenshots. Please let me know how can this issue be resolved.

    Hi,
    With reference of your screens,I can see there is no qty in the field loner hence you are getting issue.
    1.May I know ,why you have checked indicator -Repair?
    because ,you are not going to repair the goods.You are just sending loner items to customer.In this case what is the use of to indicate repair ?.
    Thanks,
    Naren

  • Adding a new schedule line for a line item using bapi_po_change

    hi experts,
    can i know how to add a new schedule line for a line item using<u> bapi_po_change</u>. what are the parameters that need to be filed. i filled poitem with total quantities and poschedule table with 2 different schedule lines and passing as the parameter.but then i get the error saying item 0000 doesnt exist

    Hi,
    Please check if you have properly populated the following fields in POSCHEDULE:
    PO_ITEM
    SCHED_LINE
    and the other fields required for your schedule line such as delivery date and quantity, etc.
    After that, make sure to properly populate fields in POSCHEDULEX:
    PO_ITEM -> same value as found in POSCHEDULE
    SCHED_LINE -> same value as found in POSCHEDULE
    All other values populated in POSCHEDULE should be ticked as 'X' in POSCHEDULEX.
    Kind Regards,
    Darwin
    Kind Regards,
    Darwin

Maybe you are looking for