Automatic scrolling after several clicks in sidebar?

Hi,
To my annoyance, everytime I am reading a long document, clicking in the righthand sidebar to move down page by page, after a certain number of consecutive clicks the document starts racing by to its end with some sort of automatic scrolling.
Does anyone have an idea of how to switch this annoying feature off?
Thanks!

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select Safari, if not already.
Press Force Quit button at the bottom of the window. Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
Hold the shift key down and launch Safari.
Best.

Similar Messages

HT2521 A pop up window in my safari is not closing. Even after several clicks on OK it keeps popping up. And the open window is not allowing me to use the Safari nor is it allowing to restart/Shutdown the Mac. Please help me rectify this error.

A pop up window on my Safari does not close even after several clicks on OK... this window keeps popping up and is not allowing using the safari nor is it alowing to close the browser. The open Safari is also not allowing to restart or shutdown the notebook. Please help me rectify the problem.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select Safari, if not already.
Press Force Quit button at the bottom of the window. Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
Hold the shift key down and launch Safari.
Best.

When I print doc in Adobe Reader, it automatically scrolls down several inches before starting to print text. Therefore text runs off bottom of page. Have tried all different settings and nothing works. Help!!!!!

When I print in Adobe Reader, the paper scrolls down several inches before the text begins therefore running off the page. I have tried numerous settings and cannot fix problem. Help!!!

I have finally cracked it!!!!!!!!!!!!!!!!
The issue is definitely with Java Sun. "Uneven character spacing when printing JTextComponent"
It is raised on the http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6488219
And currently in OPEN state, and raised on 31 Oct 2006 and mentions it was caused by fix 4352983.
So where do we go from here. It's not good because I have tried all later version of the JVM and the issue is still there.
Why? Because it hasn't been fixed yet. Read the bug report above, as it gives more insight -- and mentions the workaround is NOT good for existing code.
So the way forward is to use an earlier version of the JVM 5.
I download the JVM version 1.5.0 (starting version) and works Ok... I would probably think version prior to 4352983 would be Ok too.
Please vote for this.... We have a workaround (use older version of the JVM).
So I am very happy.

Unable to find Time Capsule in Airport Utility after several rescans

Hi all,
I just bought the latest 2GB Time Capsule last year and initially was able to connect it as a external hard drive to my wifi router.
However, I moved address this month and changed the name of my wifi. Probably the IP addresses were also changed.
I am trying to connect it to my wifi via Airport Utility however, even after several clicks on "Rescan", I am unable to detect the Time Capsule.
The manual setup and Update buttons are also disabled in the Airport Utility.
I tried to connect my Time Capsule to my Macbook via Ethernet but still the "TC drive" does not appear.
How can I change the wifi settings in my TC if I can't even detect it?
Please take note that I am not using my Time Capsule as a router but as a hard drive connecting to my dlink router.
Cheers!

You will need to perform a Factory Default Reset on the Time Capsule to get it back to original settings so that you can reconfigure to work with the D-Link router. The reset will not affect your backups.
This Apple Support document will provide the details on how to do this:
Resetting an AirPort Base Station or Time Capsule FAQ

After applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting)

After applying full scroll bar to the page including header and footer, I have provided content to
the page more than 100 lines and try to format the text from ribbon actions(format text area). On mouse over of font or fore color, the control jumps to the highlighted content area and not able to select the color. The page scrolls down and not able to click
on any action.
Consider this scenario also.
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance
to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as
Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but
I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before. Any feedback would
help.

Hi,
According to your post, my understanding is that after applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting).
I try to apply full scroll bar to the page including header and footer, the ribbon is missing after I scroll down to the web part. And I cannot apply the "Paragraph" markup style to the content.
I recommend to use the SharePoint core styles to preserve the native functionality and GUI.
By design in SharePoint, the ribbon is always at the top. When you select the content, you can apply the "Paragraph" markup style in the ribbon.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
Thanks
Linda

JS can not interact with open dialogs in any way, unless it's a dialog
created in JS using the Dialog object.
On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

'To do' list automatically scrolls up when I click on another iCal pane

Hi,
I've just begun using iCal, so forgive me if this topic has been covered before. (I did a search, but since I don't know how to describe the problem succinctly I didn't get any results.)
Here goes. Whenever I'm in the 'To Do' pane, say mid-way down the list, and then click the calendar pane my 'To Do' list automatically scrolls up to the top. When I go back to the 'To Do' pane and pull the list down to where I want to be and click on the item that I want to update, the list once again automatically scrolls to the top and I have to pull the list down one more time before I can alter it. It's very annoying and I can't find a way to fix it.
Any suggestions?
Tony L.
Mac OS X (10.4.6)

I can confirm this function. Also I wasn't able to find anyway for it to not do this.
Post relates to: None

My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?

Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.

My bridge pause all the time. I have to wait 30 seconds after selecting a picture or click the right button of the mouse. I have installed a new windows 8.1, and a fresh CD6. But still these problems in Bridge. No problems in Photoshop. What to do

What is the problem:
When I choose a picture in Bridge I have to wait 20 till 30 seconds (sometimes more).
When I choose with right click of the mouse. I have to wait the same time.
When I choose the menu. Also
After opening the picture(s) in Camera RAW. There are no problems
In Photoshop there are also no problems. Everything works all right.
Only Bridge have these problems. But I can’t work with it.
My Computer
HP Z820 with double CPU Type Mobile Intel Celeron M, 2000 MHz
Nvidia Geforce GTX 980 card
System memory 64 Gb
Windows 8.1 Home Edition
All software is up to date, incl BIOS
DirectX 4.09.00.0904 (DirectX 9.0c)
Lots of space on my disc drives
Software: Adobe Master Collection. But only installed Photoshop and Adobe Acrobat
Installation done with my original DVD of Adobe. All software updated
But still problems
Software installed again (including Windows).
Now installed adobe from a download version from adobe.
Still the same problems
I have no illegal software!
Multimedia
Geluidskaart SB Recon3D PCIe Audio Controller
Opslag
IDE apparaat Standaard Dual Channel PCI IDE Controller
SCSI/RAID apparaat Controlefunctie voor opslagruimten van Microsoft
SCSI/RAID apparaat Intel(R) C600 Series Chipset SAS RAID (SATA mode)
SCSI/RAID apparaat Intel(R) C600 Series Chipset SATA RAID-controller
SCSI/RAID apparaat LSI Adapter, SAS2 2308 Mustang
Harde schijf ATA Samsung SSD 850 SCSI Disk Device
Harde schijf ATA SAMSUNG SSD 830 SCSI Disk Device
Harde schijf SEAGATE ST3450856SS SCSI Disk Device
Harde schijf SEAGATE ST3450856SS SCSI Disk Device
Optische Station HL-DT-ST BD-RE BH16NS40
Optische Station hp DVD-RAM GHA3N
SMART Status harde schijf Onbekend
Partities
C: (NTFS) 243668 MB (150173 MB vrij)
D: (NTFS) 122101 MB (65332 MB vrij)
E: (NTFS) 429244 MB (322019 MB vrij)
F: (NTFS) 429244 MB (243491 MB vrij)
Geheugencapaciteit 1195.6 GB (762.7 GB vrij)
Invoerapparaten
Toetsenbord Logitech HID-Compliant Keyboard
Toetsenbord Standaard-PS/2-toetsenbord
Muis HID-compliant Mouse
Muis Microsoft PS/2-muis
Netwerk
Netwerkkaart Intel(R) 82574L Gigabit-netwerkverbinding (192.168.178.37)
Netwerkkaart Intel(R) 82579LM Gigabit Network Connection
Peripherieapparaten
Printer Adobe PDF
Printer EPSON XP-950 Series
Printer HP 4730 PCL 6
Printer Microsoft XPS Document Writer
USB1 apparaat Texas Instruments USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
Van: station_two
Verzonden: maandag 13 april 2015 21:58
Aan: johan van der klaauw
Onderwerp: After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
created by station_two <https://forums.adobe.com/people/station_two> in Bridge General Discussion - View the full discussion <https://forums.adobe.com/message/7434796#7434796>

I updated MUSE and now the anchors stop working after one click. Active state on the buttons are not working either. The vertical scroll also stops working. Is this a bug.

I updated to Adobe Muse 2014 and now the anchors on my site stop working on the page after one click. Vertical scroll and active state on the buttons also do not work. Is this a bug?

I am also dealing with an anchor that stopped working. I tried everything i can think of to make it work, but no luck so far. I hope to see a helpful response here. Thanks.

After upgraded to 3.6.6, firefox freezes on flash sites. After several right clicks it seems to unfreeze. Latest flash plugin already installed. Any idea

after upgraded to 3.6.6, firefox freezes on flash sites. After several right clicks it seems to unfreeze. Latest flash plugin already installed. Same happens on new profile & after clean mozilla installation. Any idea?
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET CLR 3.0.30729; InfoPath.3; .NET4.0C)

Thanks so much Anonymouseuser. This fixed it. Ironic that the plugin Firefox used to prevent freezes actually causes freezes. This so fixed my problem. http://www.technogadge.com/how-to-stop-firefox-plugin-container-exe-process/

When generate automatically a JTable after a click on a tree node

final int x[] = {0, 1, 2, 22, 0, 2, 0, 1, 0, 2};
final int y[] = {0, 0, 0, 0, 1, 1, 2, 2, 3, 3};
final int larg[] = {1, 1, 20, 1, 2, 21, 1, 22, 2, 22};
final int haut[] = {1, 1, 1, 1, 1, 1, 1, 1, 22, 22};
final int px[] = {5, 5, 85, 5, 0, 0, 0, 0, 0, 0};
final int py[] = {2, 0, 0, 0, 2, 0, 2, 0, 94, 0};
//****************** POSITIONNEMENT DES COMPOSANTS
final Container conteneur = getContentPane();
final GridBagLayout gridBg = new GridBagLayout();
conteneur.setLayout(gridBg);
final GridBagConstraints contrainte = new GridBagConstraints();
contrainte.fill = contrainte.BOTH;
//*********** JCOMBO1 **************
borneDate1 = new JComboBox();
Calendrier req = new Calendrier();
String[] valCal = req.lireDansTable();
borneDate1.addItem("");
for (int i = 0; i<= valCal.length - 1; i++){
 borneDate1.addItem(valCal);
contrainte.gridx = x[0];
contrainte.gridy = y[0];
contrainte.gridwidth = larg[0];
contrainte.gridheight = haut[0];
contrainte.weightx = px[0];
contrainte.weighty = py[0];
contrainte.insets = new Insets(1, 1, 1, 1);
contrainte.ipadx = 20;
gridBg.setConstraints(borneDate1, contrainte);
conteneur.add(borneDate1);
//*********** JCOMBO2 **************
borneDate2 = new JComboBox();
req = new Calendrier();
valCal = req.lireDansTable();
borneDate2.addItem("");
for (int i = 0; i<= valCal.length - 1; i++){
borneDate2.addItem(valCal[i]);
contrainte.gridx = x[1];
contrainte.gridy = y[1];
contrainte.gridwidth = larg[1];
contrainte.gridheight = haut[1];
contrainte.weightx = px[1];
contrainte.weighty = py[1];
gridBg.setConstraints(borneDate2, contrainte);
conteneur.add(borneDate2);
//*********** JLABEL1 **************
lbl1 = new JLabel(" Dates de S�lection.");
contrainte.gridx = x[2];
contrainte.gridy = y[2];
contrainte.gridwidth = larg[2];
contrainte.gridheight = haut[2];
contrainte.weightx = px[2];
contrainte.weighty = py[2];
gridBg.setConstraints(lbl1, contrainte);
conteneur.add(lbl1);
//*********** BOUTON IMPRIMER **************
btmImprimer = new JButton("IMPRIMER");
contrainte.gridx = x[3];
contrainte.gridy = y[3];
contrainte.gridwidth = larg[3];
contrainte.gridheight = haut[3];
contrainte.weightx = px[3];
contrainte.weighty = py[3];
gridBg.setConstraints(btmImprimer, contrainte);
conteneur.add(btmImprimer);
//*********** BOUTON AUJOURD'HUI **************
btmAujourdhui = new JButton("Ce jour");
contrainte.gridx = x[4];
contrainte.gridy = y[4];
contrainte.gridwidth = larg[4];
contrainte.gridheight = haut[4];
contrainte.weightx = px[4];
contrainte.weighty = py[4];
gridBg.setConstraints(btmAujourdhui, contrainte);
conteneur.add(btmAujourdhui);
//*********** JLABEL 2 **************
lbl2 = new JLabel(" Journal.");
//lbl2.setVisible(false);
contrainte.gridx = x[5];
contrainte.gridy = y[5];
contrainte.gridwidth = larg[5];
contrainte.gridheight = haut[5];
contrainte.weightx = px[5];
contrainte.weighty = py[5];
gridBg.setConstraints(lbl2, contrainte);
conteneur.add(lbl2);
//*********** JLABEL 3 **************
lbl3 = new JLabel(" Adresse ");
contrainte.gridx = x[6];
contrainte.gridy = y[6];
contrainte.gridwidth = larg[6];
contrainte.gridheight = haut[6];
contrainte.weightx = px[6];
contrainte.weighty = py[6];
gridBg.setConstraints(lbl3, contrainte);
conteneur.add(lbl3);
//*********** JTEXTFIELD **************
txtPath = new JTextField();
contrainte.gridx = x[7];
contrainte.gridy = y[7];
contrainte.gridwidth = larg[7];
contrainte.gridheight = haut[7];
contrainte.weightx = px[7];
contrainte.weighty = py[7];
gridBg.setConstraints(txtPath, contrainte);
conteneur.add(txtPath);
//*********** JTREE **************
DefaultMutableTreeNode racine = new DefaultMutableTreeNode("MEDIACAST");
//**********RECUPERER LES LIGNES ANIMATEUR*******
parentNode = new DefaultMutableTreeNode("ANIMATEURS");
racine.add(parentNode);
GenererEnregistrement enregAnimateur = new GenererEnregistrement();
String[] sEnregAnim = enregAnimateur.lireDansTable("SELECT numero_anim FROM animateur ORDER BY numero_anim", "numero_anim");
for(int i = 0; i <= sEnregAnim.length - 1; i++){
fils = new DefaultMutableTreeNode(sEnregAnim[i]);
parentNode.add(fils);
//************RECUPERER LES LIGNES COMPTE******************
parentNode = new DefaultMutableTreeNode("COMPTES");
racine.add(parentNode);
GenererEnregistrement enregCompte = new GenererEnregistrement();
String[] sEnregCompte = enregCompte.lireDansTable("SELECT id_compte FROM compte ORDER BY id_compte", "id_compte");
for(int i = 0; i <= sEnregCompte.length - 1; i++){
fils = new DefaultMutableTreeNode(sEnregCompte[i]);
parentNode.add(fils);
//************RECUPERER LES LIGNES DATE******************
parentNode = new DefaultMutableTreeNode("DATES");
racine.add(parentNode);
GenererEnregistrement enregDate = new GenererEnregistrement();
String[] sEnregDate = enregDate.lireDansTable("SELECT daty FROM calendrier ORDER BY numero_enreg", "daty");
for(int i = 0; i <= sEnregDate.length - 1; i++){
fils = new DefaultMutableTreeNode(sEnregDate[i]);
parentNode.add(fils);
//*************AFFICHAGE******************
TreeNode root = racine;
arbre = new JTree(root);
JScrollPane paneTree = new JScrollPane();
//**********EVENEMENT CLICK DROIT DANS JTREE***************
MouseListener ml = new MouseAdapter() {
public void mousePressed(MouseEvent e) {
int selRow = arbre.getRowForLocation(e.getX(), e.getY());
TreePath selPath = arbre.getPathForRow(selRow);
if(selRow != -1) {
 if(e.getButton() == 1) {
 txtPath.setText(selPath.toString());
 //**-> CREER LE VECTEUR POUR JTable**<-
 String sPere = txtPath.getText();
 int iResComp = sPere.compareTo("[MEDIACAST, ANIMATEURS]" + arbre.getLastSelectedPathComponent().toString() + "]");
 //****ANIMATEURS***************
 switch(iResComp){
 case -49:
 String sReq = "SELECT animateur.matricule, animateur.prenom, calendrier.daty, compte.id_compte";
 sReq = sReq + " " + "FROM animateur, liaison";
 sReq = sReq + " " + "WHERE animateur.numero_anim = ? AND liaison.numero_anim = ? AND calendrier.daty = liaison.daty";
 String[] sParamIn = {
 arbre.getLastSelectedPathComponent().toString(), arbre.getLastSelectedPathComponent().toString()
 String[] sTypeParamIn = {
 "entier", "entier"
 String[] sParamOut = {
 "matricule", "prenom", "daty", "id_compte"
 GenererEnregistrement enreg = new GenererEnregistrement();
 objEnreg = enreg.retournerToutEnreg(sReq, sParamIn, sTypeParamIn, sParamOut);
 iNbEnreg = enreg.donnerNbEnreg(sReq, sParamIn, sTypeParamIn, sParamOut);
 Object[] teteTable = {
 "Matricule","Prenom","Date", "Numero Compte"
 data = clickTreeNode(teteTable.length, iNbEnreg, sParamOut.length, objEnreg);
 tableau = new JTable(data);
 //*********** JTABLE **************
 JScrollPane paneTab = new JScrollPane(tableau);
 contrainte.gridx = x[9];
 contrainte.gridy = y[9];
 contrainte.gridwidth = larg[9];
 contrainte.gridheight = haut[9];
 contrainte.weightx = px[9];
 contrainte.weighty = py[9];
 gridBg.setConstraints(paneTab, contrainte);
 conteneur.add(paneTab);
 break;
 else if(e.getButton() == 3) {
 arbre.setSelectionPath(selPath);//Donne le focus au noeud click�
 txtPath.setText(selPath.toString());
 //***********POUR LES NOEUDS PERES*******************************
 if(arbre.getLastSelectedPathComponent().toString() == "ANIMATEURS"){
 System.out.println(selPath.getParentPath().toString());
 //***********POUR LES NOEUDS FILS********************************
 String sPere = txtPath.getText();
 int iResComp = sPere.compareTo("[MEDIACAST, ANIMATEURS]" + arbre.getLastSelectedPathComponent().toString() + "]");
 switch(iResComp){
 case -49:
 System.out.println("NOEUDS DANS ANIMATEURS:" + iResComp + " " + arbre.getLastSelectedPathComponent().toString());
 break;
 case 2:
 if(arbre.getLastSelectedPathComponent().toString() != "COMPTES")
 System.out.println("NOEUDS DANS COMPTES:" iResComp " " + arbre.getLastSelectedPathComponent().toString());
 break;
 case 3:
 if(arbre.getLastSelectedPathComponent().toString() != "DATES")
 System.out.println("NOEUDS DANS DATES:" + iResComp + " " + arbre.getLastSelectedPathComponent().toString());
 break;
 arbre.addMouseListener(ml);
 paneTree.setViewportView(arbre);
 contrainte.gridx = x[8];
 contrainte.gridy = y[8];
 contrainte.gridwidth = larg[8];
 contrainte.gridheight = haut[8];
 contrainte.weightx = px[8];
 contrainte.weighty = py[8];
 gridBg.setConstraints(paneTree, contrainte);
 conteneur.add(paneTree);
 //Afficher la fen�tre
 ImageIcon ico = new ImageIcon("c:\\works\\mediacast\\gpao\\hlpglobe.gif");
 this.setIconImage(ico.getImage());
 //this.pack();
 this.setVisible(true);
I want to generate automatically a table after a click on a tree node but I don't know when to procede

Please do the following. 
#In the location bar, type '''about:config''' and hit Enter. 
#In the filter at the top, type: '''keyword.URL''' 
#Double click it and remove whatever's in there and replace it with http://www.google.com/search?q= and then click OK. 
#Close the tab
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''. 
* Go to the site you want to set as your homepage. 
* Click the Firefox button, go to '''Options '''| '''Options '''| '''General'''. 
* Make sure it says "''Show My Homepage''" in the first dropdown menu. 
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. 
N.B. Some of your plugins are out of date which exposes your system to attack. Please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary.
Also, click '''Help '''| '''Check For Updates''' to update Firefox to 3.6.19

TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

Dear Sir or Madam,
I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
Thank you very much and looking forward to your help.
BR

Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
Or another peripheral you stored away in a cabinet near by?

TS3230 Why aren't Google and Yahoo loading in Safari with Maverics? After several failed attempts, a "wireless diagnostics" zipped folder appeared on my desktop. I'm using a macbook pro with OSX 10.9.2

I updated to Maverics and now yahoo and google do not load in Safari - i get a "connot connect to server" warning. other websites load just fine.
Also, after several attempts to access the aforementioned sites, a zipped file/folder appeared on my desktop titled "WirelessDiagnostics"
What in the world is going on here? I attached a screenshot of the zip file.

Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
www.google.com
Launch the Network Utility application.
Step 1
Select the Lookup tab and paste into the address field (command-V). Press return. Post the output that appears below – the text, please, not a screenshot.
Step 2
Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
Important Note
Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters.

Automatic scrolling after several clicks in sidebar?

Similar Messages

Maybe you are looking for