Automatic shutdown on PlayBook

hi folks,
my playbook shut down automatic! If i'm on a game or make music comes the popup your PlayBook shutdown! It was 4 or 5 times maybe! The Battery is full and i have restart the PlayBook from time to time! Anyone's knows what it is? To much sideloading?
Kind Regards
Funky Dread

I think i known that the issue is from an Android App! Everytime if opend the Android Player i see a popup in the left top corner, with the Android sympol and error loading app information!
Well, this is from to much sideloading i think! The latest PlayBook update with 30mb stopped on 23% and load after a short time the completly OS with 430mb and install it!
I will reset the PlayBook in the next day's and we will look what it does! It was cool if the PlayBook has a Event Log like on BB Phones! Or any tool to analyzed what it happend
Kind Regards
Funky Dread

Similar Messages

Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

:Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
Maybe some of you might help me, I would highly appreciate that.
Kind regards
Guyfromgermany

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

WebLogic Datasources : Automatically Shutdown and Start up

Hi there,
I have a problem with my datasources, I have WLST script which shutdown and start automatically some datasources in my environment, all of them in my crontab !
Follow exactly my script !
[weblogic@wls_server restartDS]$ cat shutdownDS1.py | more
connect('weblogic','password','t3://server:10000')
domainConfig()
servers = cmo.getServers()
domainRuntime()
for server in servers:
try:
print 'check ' + server.getName()
print '/ServerRuntimes/' + server.getName() + '/JDBCServiceRuntime/' + server.getName() + '/JDBCDataSourceRuntimeMBeans/MYDATASOURCE-XA1'
cd('ServerRuntimes/' + server.getName() + '/JDBCServiceRuntime/' + server.getName() + '/JDBCDataSourceRuntimeMBeans/MYDATASOURCE-XA1')
objectArray = jarray.array([], java.lang.Object)
stringArray = jarray.array([], java.lang.String)
invoke('shutdown', objectArray, stringArray)
except WLSTException,e:
print server.getName() + 'is not running.'
for server in servers:
try:
print 'check ' + server.getName()
print '/ServerRuntimes/' + server.getName() + '/JDBCServiceRuntime/' + server.getName() + '/JDBCDataSourceRuntimeMBeans/MYDATASOURCE-XA2'
cd('ServerRuntimes/' + server.getName() + '/JDBCServiceRuntime/' + server.getName() + '/JDBCDataSourceRuntimeMBeans/MYDATASOURCE-XA2')
objectArray = jarray.array([], java.lang.Object)
stringArray = jarray.array([], java.lang.String)
invoke('shutdown', objectArray, stringArray)
except WLSTException,e:
print server.getName() + 'is not running.'
exit()
Don´t worry, I have another script which kill XA3 and XA4 datasources as well, so, this way, I have load balancing here !
It works with CRONTAB !
The problem here is : Doesn´t matter if datasources are running or not, simply , datasources automatically shutdown and after that, start it! But I would like to improve this, I would like to implement datasource status condition, I mean, when datasource it become overloaded, it kill automatically , this way, I would not use crontab, but another kind of trigger |!
Did you see this before ?
I would like to improve this workaround !
Just keep in mind, me and my team, didn´t discover the root cause yet, so, this automatically datasource restart is a kind of workaround!
Thanks in advance !
Edson

Hmm. what was the problem app?
Force a shut down by holding the power button for an extended amount.
Reboot into SafeBoot mode to clear cache files, then reboot as normal.
SafeBoot http://support.apple.com/kb/HT1564

We are trying automate shutdown VM listed in hyper -v using C# &WMI?

We are trying to automate shutdown VM listed in hyper-V using C# WMI? I think there is difference between VM shutdown and VM turnoff?I got the requeststate change value for turnoff(that is 3), what is the requeststate change value to shutdown VM?
Thanks in advance.
Venkatesh

"shut down" attempts to trigger a clean shutdown of the VM by using the Integration Components to signal the OS in the VM to cleanly shut down. If the ICs are not available or that times out, then the VM is Powered Off.
"turn off" simply hits the power switch of the VM. As if the power cord was pulled. This is a hard down state, and generally one we don't want to see.
http://blogs.msdn.com/b/virtual_pc_guy/archive/2011/01/11/shutting-down-a-virtual-machine.aspx
http://blogs.msdn.com/b/virtual_pc_guy/archive/2011/01/10/turning-off-a-virtual-machine.aspx
http://blogs.msdn.com/b/virtual_pc_guy/archive/2008/01/30/shutting-down-a-hyper-v-virtual-machine.aspx (old namespace)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

ILOM on X4x00 - temperature monitoring snmp, automatic shutdown

Hello,
we run some X4100/X4200 servers. I want to monitor temperatures via ILOM's snmp interface. Unfortunately I get all kind of information with snmpwalk like sensor typ, hysteresis, unit, .... except the current sensor readings. Did anybody succeed in reporting temperatur sensor readings via snmp with ILOM ? We run ILOM firmware 1.0, build 6464.
Additionally I need to verify that some automatic shutdown happens once a system gets too hot. To test I would like to lower the temperature sensor threshold. How can I do this, how can I lower the temperature thresholds in ILOM?
Any help is greatly apreciated, with kind regards,
Heinrich

I'm trying to get thermal shutdowns to happen, too, for a cluster of X4100s managed with N1SM. I don't use SNMP, though. I've found that the ILOMs have good support for IPMI. e.g.
echo changeme > changeme
ipmitool -u root -f changeme -H 192.168.1.20 sensor list
I can set the sensor thresholds with ... sensor thresh fp.t_amb unr 33
Thresholds set this way don't stick across power-cycling the ILOM, so I'll probably set up a cron job to set them.
The machine does a hard shutdown a few seconds after a sensor exceeds it's non-recoverable threshold. It never seems to shut down or signal the OS with ACPI or anything when the critical or non-critical (warning) thresholds are exceeded. It does log it in the sensor log, and I think sends an IPMI alert, since N1SM configures the master machine as an alert target. (in the ILOM cli, show /SP/alerts, or something).
ipmitool(1m) says that the soft shutdown command is done by having ACPI signal the OS that there is a "fatal overtemperature". I had assumed that that was what N1SM used to soft-power-off machines, but it seems that ipmitool ... power soft doesn't actually do anything to Solaris 10u1 amd64. So that's what I need to fix, I guess. I could try booting GNU/Linux from a CD to maybe see the ACPI events and make sure they're really being sent...
Anyway, I'd love to hear how to get Solaris to soft shutdown on critical temps. If I don't figure it out soon, I'll just lower the "non-recoverable" thresholds, since I'm just running grid engine on nodes provisioned from a flash archive, so I don't need to worry too much about clean shutdowns.

Set a delay for automatic shutdown of virtual machines

Hallo,
is there a way to set a delay for the automatic shutdown of the guests when the host is shutting down? Just like the automatic startup delay but for the shutdown. The simplest possibility would be to shutdown the guest in the opposite of the startup delay.
I want to shutdown the Exchange Server first and then the rest - the virtual Domain Controller should be shutdown as the last server.

Hi,
Additional, please notice the guest 5 minutes delay shutdown issue, more detail please refer the following article:
Shutting down a virtual machine
http://blogs.msdn.com/b/virtual_pc_guy/archive/2011/01/11/shutting-down-a-virtual-machine.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create a windows script to automate shutdown databases during maintainance

Can any one please me the script to automate shutdown databses during maintainance.
The script would be scheduled from the Windows server and will be shutting down databases hosted in AIX server .
Windows server will interact with Aix servers using SQLPLUS COMMANDS (TNSNAMES).
Please let me know because I am working on this issue and it needs to be resolved.

There are thousands of scripts available, just google it. In creation/execution of your script, if you face any problem or see any errors than you can come here and post it.

Oracle database automatically shutdown when i restart computer

Hi all!
i have some problems, so i want your help
i have the database which name is ORCL but i don't understand why when i restart my computer, my database automatically shutdown, so i alway have to execute this command after restarting my computer
connect / as sysdba
startup
could you show me how to fix that error
help me!

Hi,
Refer this thread for a full explaination...
Oracle service failed to start in a timely manner
Regards.

Services automatically shutdown

Dear all,
OS - Windows XP
Version - 10.2.0
am trying to find one sql statement in archive log using dbms_logmnr. but database service automatically shutdown
ORACLE-BASE - Oracle Logminer
C:\Documents and Settings\XPMUser>exit
SQL> BEGIN
2    DBMS_LOGMNR_D.build (
3      dictionary_filename => 'archieve.ora',
4      dictionary_location => 'C:\oraclenew\product\10.2.0\');
5 END;
6 /
PL/SQL procedure successfully completed.
SQL>
SQL> BEGIN
2    DBMS_LOGMNR.add_logfile (
3      options     => DBMS_LOGMNR.new,
4      logfilename => 'C:\oraclenew\product\10.2.0\flash_recovery_area\RAJA\AR
CHIVELOG\2013_10_20\O1_MF_1_7_966TM93Q_.ARC');
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2    DBMS_LOGMNR.start_logmnr (
3      dictfilename => 'C:\oraclenew\product\10.2.0\flash_recovery_area\RAJA\A
RCHIVELOG\2013_10_20\O1_MF_1_7_966TM93Q_.ARC');
4 END;
5 /
BEGIN
ERROR at line 1:
ORA-03113: end-of-file on communication channel
SQL>
Why this occurring please help

please try
# sqlplus
BEGIN
DBMS_LOGMNR.start_logmnr (dictfilename => 'C:\oraclenew\product\10.2.0\archieve.ora');
END;

System startup Problem grey screen is going regularly and automatically shutdown

Hi
kindly resolve us this problem urgently
error msg. :- System startup Problem grey screen is going regularly and automatically shutdown
thanks
Dhaval Oza

Use RECOVERY MODE.
Boot from another drive with a copy of OS X too is always good.
A Safe Boot at a minimum.

Automatic shutdown of an database's instance

For some unknown reasons, an instance of our database was shutdown automatically almost every night. I have to run Oracle Enterprice Manager to re-open the instance.
I checked Windows Event Viewer but I could not find any info to determine which cause our database's instance shutting down. Our Oracle version: 9.2
Anyone know what would have caused an automatic shutdown of an database instance in Oracle?
Please help
Thanks

Thanks for all responses to my question.
I found the cause of automatic terminating database instance.
I looked into the Oracle trace log and I found the error 340: IO file lock by other process. Then I googled this error and found a related article. One of the oracle files was locked by Veritas File Backup Exec process to perform nightly backup.
Thanks
Norm

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do?

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do？

Hold down Command-R to get to Recovery_HD, a special Volume on your Hard drive that has some Utilities and an Installer.
Start Disk Utility.
Select you boot drive and click "Repair Disk".
Post any error messages.

Automatic shutdown command does not show warning message

I'm trying to automatically shutdown a computer remotely and I'm sending the following command:
shutdown -h +2 "Shutting down in 2 minutes."
I want users to be able to have a warning before the system shuts down.
The machine is shutting down, but my message is not popping up.

shutdown is a Unix shutdown command and it sends its shutdown message to terminal sessions. Are you users using the terminal?
Otherwise maybe you want to try getting help for an Applescript popup, or maybe using Growl which has a command line utility for generating growl messages on screen.

Automatic shutdown/startup EBS DB script on R12.1??

Our EBS R12.1 system going to production soon. I wonder anyone have automatic shutdown/start database scripts (only DB, application on seperate server) which we can reference.
Thanks.

Hi ef;
We are using cold backup sh and sometimes we faced same thing as you mention. But i can tell you its not soo fruquently. How we notice this error? After cold backup we send email about cold backup logs. If we see error on log files (after apps side down(and wait 240 sec),then closind db)
we have this error in log:
Shutting down database ZZZ
SQL*Plus: Release xxx -Production on
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01013: user requested cancel of current operation Disconnected from Oraclex Enterprise Edition Release xxx- 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release xxx Production
so we find related process id from log file and kill it as Hussein Sawwan mention
Hope it helps
Regard
Helios

Automatic Shutdown THINKCENTER A70

Hi sir's,
Good day!
I have problem with our 2 machines, we use thinkcenter a70 the machine automatically shutdown, i dont know why?
I run diagnostic tests
Quick Hardware Test : All passed
Full System Test : All passed
System Stress Test : 1 st process done but in second process it fails and shutdown.
I already put thermal paste in heat sink. I already reformated the hard disk and installs the new OS.
In BIOS and in safe mode it runs smoothly and not shuting down.
I already try to change powersupply, ram and hardisk.
Please help me. THanks a lot

Hi,
You can schedule a powershell script to read a list of machine names from a text file and then shut them down.
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/cb361ea0-fd9b-4aec-8199-8bc273ce465a/scheduling-automatic-shutdown-for-pcs-found-on-the-domain?forum=winserverManagement
Regards,
Gopi
JiJi
Technologies

Automatic shutdown on PlayBook

Similar Messages

Maybe you are looking for