Automatic slideshow/movie creation from rolls

Hi All;
My concern is how to automatically create slideshow from my rolls. I'd like to select all my rolls and then create slideshows for each and finally export slideshows as movies named as roll.
Please tell me if I'm wrong. Please some ideas.
iMac Mac OS X (10.4.5) CoreDuo

Hi Kris,
Click on the roll title, hit the slideshow icon
set up the slideshow the way you want.
When done, go to share>export and choose the Quicktime tab and choose your options then export to the desktop.
do this for each roll

Similar Messages

Automatic Sales Order Creation from PO in B1

Hi,
I have this scenario. Purchase order is created in SAP B1 (Business One) which triggers automatic Sales Order creation in SAP ECC 6.0.
The requirement:
For the combination of PO number and Sold to party there should be only one sales order created.
The problem:
Sometimes for the same PO duplicate Sales orders(sometimes 3,4) are getting created in ECC.
Possible causes:
Probably no validations in the interface.
Question:
1. First of all, is it an SD issue or PI (process integration) issue.
2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
Thanks.
Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
How do I move this to "ERP - Sales and Distribution (SD) General", because this question is not just related to "ERP SD Sales" but SD in general. Isn't there an option for the users to a question from one forum to another.

1. First of all, is it an SD issue or PI (process integration) issue.
- May be PI, or SD or both. I am not sure about the integration mechanism/program so I am not able to pinpoint.
2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
In t.code VOV8, go to the sales document type. Select value A in the field, check Purchase order Number. Then go to t.code OVAH, there make the message number V4 115 as error message. This will not allow the creation of the sales order, if the Purchase order number duplicates. I assume in your process, the purchase order number is populated in the PO number field of the sales order overview screen.
Regards,

Movie Creation from an Image Sequence

Hi, my question is about how to use iMovie to create a movie from an image sequence.
I have much experience doing this in Quicktime Pro. I just import the image sequence and select the time interval for each frame.
I want to use iMovie 4 nstead of Quicktime Pro to do this because I'd like the frames to span variable time lengths and be synced to audio. I'm sure this is easy, but as someone new to iMovie I have no idea how to do it.
thanks
Powerbook G4 15 aluminum Mac OS X (10.4.7)

Another way is to import the sequence directly into iMovie, automatically importing with the duration you want. iMovie lets you set a duration from 1 frame up.
• iMovie lets you select any number of images to import at the same time, so you can select one image to import or a sequence of images in a folder. (Use the Import command so the numbered sequence arrives in the proper order.)
(To import all the images in a folder, press Command-A after navigating to that folder. Otherwise use Command-clicking and Shift-clicking to select the images.)
• Imported images always conform to your current Ken Burns settings. So if KB is set to import as 5 seconds with no zoom, that's how the images arrive.
But you're not limited to <n> seconds. You can force KB to import as 1 frame, 10 frames or whatever. The trick is to first configure KB to import with that duration.
Trouble is, the KB duration textbox is buggy so you can't type your desired duration there. But KB can be set another way, by clicking on any previously-imported image. So the trick is to create a clip with the duration you want, then use it as a "template" for importing other images.
To create a clip with the duration you want, double-click on a previously-imported clip and set its duration to <n> frames. (Type 00:00:01 for one frame.) Before importing the sequence, click on that clip, which sets KB to apply its settings for the next import(s).
One can create a series of "template" clips, one for each duration commonly used. Before importing each new set of images, click on the clip you want to control the next import.
Unfortunately, once images are imported there is no way to simultaneously Update all to a new duration using a textbox. It may be easiest to simply re-import the images with a new duration.
Karl

APO: RRP3 automate Production order creation from planned order ?

Hi everyone ,
I have got a business requirement in APO where in Open sale orders uploaded in R/3, needs to be converted to Planned order and subsequently to Production order in APO-PPDS tcode RRP3 at all stages. They want to automate this process rather than doing it
manually.
Can anyone tell how is this possible . Any BAPI or function module available to do this . Please help.
Regards,
Syed

Hi,
1.You need to run the heuristics Planning of standard lots SAP_PP_002 in /SAPAPO/CDPSB0 by specifying the time profile
and strategy profile, planning version and propagation range, product and location.
2. Convert PPDS Planned Orders created to process orders thru /SAPAPO/RRP7 by specifying the product location start date of the order for production order creation.
Out put of step 1- For sales order requirement, PPDS Planned orders gets created.
Out put of step 2- PPDS Planned orders are converted to production orders.
Thanks,
nandha

Automatic schedule lines creation from PR

Hi,
We have a scheduling agreement for certain material
We have maintained a Automatic PO tick in Material master as well as in vendor master
We have also maintained purchasing info fo records and source list
Now we have created a manual PR.
And when we are running the T code ME59 system is creating the PO.
Is it possible to generate schedule lines (automatically through ME59) against a scheduling agreement instead of creating a new PO?
Regards,

Hello,
The transaction ME59 does not select the purchase requisitions assigned to a scheduling agreement. The reason for this is that the Scheduling agreement itself is equivalent to a purchase order. For a purchase requisition assigned to a scheduling agreement, you have to create a delivery schedule only and not a purchase order. Automatic conversion program currently does not handle creation of delivery schedules.
Please use ME58 instead.
br,Gabor

Automatic p.o. creation from purchase requsition.

hello all,
I AM TRYING TO CREATE AUTOMATIC PURCHASE OREDER FROM PR.I HAVE DONE ALL MANDATORY SETTINGS NEED TO BE DONE LIKE AUTOMATIC P.O.INDICATOR IS SET IN MM02,IN XK02 AUTOMATIC P.O. INDICATOR IS ALREADY SET.
1) IN ME59 TCODE,WHEN I AM ENTERING VENDOR CODE AND PR NO(WITHOUT VENDOR). THEN SYSTEM SHOWS THE MESSAGE NO PURCHASING DOCUMENT FOUND.
2) BUT WHEN I CREATE THE PR. WITH VENDOR CODE THEN DURING ME59 EXECUTION P.O. IS AUTOMATICALLY CREATED BY SYSTEM.
NOW MY QUESTION IS THAT WHY AUTOMATIC P.O. IS NOT CREATED DURING IN FIRST CASE?
reply me with some valuable input asap.
regards
simran

ok u have to maintain in the system, what is combination of vendor and material?

Automatic Sales order creation from IDOC generated in another SAP instance?

Hi,
I have been trying to create Sales ordes in a seperate SAP instance, through the Purchase order generated in another Instance.
The Purchase order generated, passes the informtion through an IDOC to another SAP instance, I am getting the following error
" VKORG, VTWEG, SPART cannot be determined for customer 0000001000 ,Vendor000200038 "
It is Message No VG204 , Status Record 51
Please help to solve the problem.
Regards,
Chamandeep

SAP Xpert friends,
I really need help in figuring out this error I get when I send an IDoc from external system to SAP.
Here is what I do....
create empty idoc of type ORDERS01
idoc.MESTYP = "ORDERS";
idoc.SNDPRN = "1171";
idoc.SNDPRT = "KU";
idoc.MANDT = "400";
idoc.SNDPFC = "AG";
idoc.MESCOD = " ";
idoc.MESFCT = " ";
idoc.TEST = " ";
create segment of type E1EDK01
add field MENGE with a value
add segment e1edp01 to idoc
create segment of type E1EDP19
add field QUALF with a value to segment
add field IDTNR with a value to segment
add segment E1EDP19 to idoc
send idoc
When I check WE02 in SAP, I can see the idoc, but
get this error
Here are all the STATUS RECORDS
<b>50 IDoc added
64 IDoc ready to be transferred to application
62 IDoc passed to application
51 Error: Application document not posted
    <i>VKORG, VTWEG, SPART cannot be determined</i>
    for customer 0000001171 , vendor</b>
I checked on Internet and found that VOE2 can be used to setup ... this is what I have in VOE2
Customer    Vendor SOrg     DChl   Dv
1171        0000001171       1000   00
Thanks for help...

How do i move clips from home video to roll?

how do i move clips from home video to roll?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

HT4890 Can you move photos from camera roll to photo stream?

Can you move photos from camera roll to photo stream?

Photos taken on your device (which are saved to the camera roll) after enabling photo stream are automatically added (when connected to wifi, the camera app is closed, and you have at least 20% battery power remaining). If you want to add earlier photos you'll have to either email them one by one to yourself, then open the email and save them back to your camera roll (which will now upload to photo stream because it is considered a new photo), or you can send them all at once using an app like PhotoSync. With this app you can transfer them wirelessly to your computer, then delete them from your camera roll on your phone, the send them back to the camera roll from your computer (which will again cause them to be seen as new photos). (iTunes will not transfer photos to your camera roll so you can't just import them and sync them back.)

How do i move photos from Camera roll to My photo stream on i4s

how do i move photos from Camera Roll to My photo Stream and then make sure all photos go strait to my photo stream

Hi Bobnbo,
Welcome to Apple Support Communities.
It sounds like you want the photos in your Camera Roll to be moved to My Photo Stream. The article linked below answers a lot of frequently asked questions about My Photo Stream, it should answer your question and give you some other general information you may be interested in also.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
When do photos upload to My Photo Stream?
When you turn on My Photo Stream on your devices, all new photos you take or import to those devices will automatically push to your photo stream.
iOS devices: New photos that you take automatically upload to your photo stream when you leave the Camera app and connect to Wi-Fi. My Photo Stream doesn't push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture automatically upload when you connect to Wi-Fi or Ethernet. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream upload.
PC with iCloud Control Panel 2.1 or later: Open a Windows Explorer window and, under Favorites, select iCloud Photos if you're using iCloud Control Panel 3.0 or later (or Photo Stream if you're using 2.1 to 2.1.3). Open My Photo Stream. Click the Add photos button. Select the photos to import to My Photo Stream, then click Open.
I hope this helps.
-Jason

Automatic PO creation from SC

Hi Experts,
I am using SRM 7.0 with extended classic scenario and I have issue in the automatic po creation. For some Shopping Carts the PO is not automatically created. The SC is having Source of Supply Assigned and all the approves have completely approved the SC. The latest status is I1111 Item in Transfer Process.
I checked in RZ20, ST22 and could not find any error or dumps.
For the SC item under BBP_PDBEI the BE_OBJECT_TYPE is BUS2201 and BE_OBJECT_ID 1, once I trigger the PO creation manually the PO object id is reflected here.
For such SC I am running the report BBP_ALERT_SB_NOTTRANSFERED manually which puts the SC in I1112 Error in Transmission Status and later I can trigger the SC creation from the alert monitor.
For POs created in this manner the PO is created in Held Status without any line items, is this normal?
I have two questions which I want to understand, how is the automatic po creation from SC setup, is there any customizing involved for the po creation from SC to happen automatically?
What else should I check to find the reason why the the SC was stuck in I1111 status and PO was not created?

You need to configure the Purchasing group and this will take care of automatic transfer of Doc to sourcing cockpit. Make sure you also maintain the customization for sourcing always carried out for Prod categories.
Regards
Saurabh

Automatic PO creation from PR for non materials

A requirement has recently been raised where the business wants to introduce the use of purchase requisitions and once the purchase requisiiton has been released (approved) a purchase order be automatically created from the purchase requisition. However the business do not use or maintain material records, purchasing info records or source lists. If the the standard automatic purchase order from purchase requisition is used (ME59N) these items are required. In entereing the purchase requisition it is expected that the 'Desired Vendor' will be entered. Has anyone had a similar scenario where the automation of purchase order creation is required? Any assistance is appreciated.
Thanks

Hi,
For no material, only for SERVICE procurement , the Service auto- PO created by activating Automatic Purchase order creation for Service requisitions in t.code: ML91. Create info record based on Material Group. For Automatic PO , info record is mandatory. For more please read note 635511
Regards,
Biju K

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

How do i move photos from photo library to camera roll

how do i move photos from photo library to camera roll on ipod touch 4th generation

I also had a similar problem with "photo library" and wondered how to do about copying my photos there to my computer. I was delighted when i succeeded moving my photos from my iphone4s "Photo library" to my "camera roll".
I could do it using 3 apps: 1) fileExplorer 2) fileapp 3) dropbox
Downloading these apps on my iphone devide and then Using 1) I was able to see my albums in "photolibrary" and open it in either 2) or 3). Opening it up in 2) fileapp, will give you the option to save in "camera roll" with the top right hand corner button.
After saving it in camera roll, I will be able to easily copy them out from camera roll from DCIM folder onto your computer.
I am not a comp savvy person, and I managed.

Is there a way to automatically move mail from one folder to another?

Is there a way to periodically, automatically, move mail from one folder to another?
For example, I'd like to move mail from one of my IMAP/Archives folders to my MyMac/Archive folder and I'd like this to happen without intervention.
Can this be done?

I'll try to be more specific.
When I'm done with an email, I archive it.
Because I have multiple email accounts, this results in emails in multiple Archive folders (one per account).
I'd like to have these automatically all moved into one (on my Mac).

Automatic slideshow/movie creation from rolls

Similar Messages

Maybe you are looking for