Automatic SMS/Mail notification for local auto-reaction method

Hello!
We would like to be informed via SMS/Mail about the Availability of satellite system.
When we assign a Local auto-reaction method for this MTE (Availability_SysPercent_ABAP) we receive the SMS/Mail notification only in case we manually start the auto reaction method from RZ20.
When we try to assign the central auto reaction method from RZ20 we get the following error:
Assignment for local system only works with nodes from agent segments
What is the procedure for the automatic SMS/Mail notification in case of local auto-reaction method?
Thank you very much!

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

Similar Messages

Local auto reaction method no longer linked to MTE

Strange one.... all my local autoreaction methods have disappeared from from my MTE properties in RZ20. The methods still exist in RZ21 and the 'where used' reports that it is still inked to that MTE. Have checked that the mehtod is released for variant * (which is the acitve variant).
Any ideas would be helpful as the only option is to link the methods again manually.....which is mind numbing task. Anyone got a way of linking an autoreaction method (local) to multiple MTE's?
Thanks in advance,
Marcus

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

Query regarding auto e-mail notification for ccms

Hi,
I want to configure auto e-mail notifications for ccms alerts.
I have configured ccms monitoring for our landscape on the solution manager.I went through the SAP documentation and it mentions that we have to do the SCOT settings and CCMS_OnAlert_Email_V2 method settings in client 000.But we already have the SCOT config done in 100.
My question is can i complete the rest of the config in 100 or i have to do everything in client 000 only.
Thanks,
Shashank

No Shashank. I dont think this is required. You need not have to redo everything in 000 client.
You only have to create the user in 000 client.
Might be you have to create an RFC connection between your 000 client and the 100 client. I will confirm this to you tomorrow or so. Make sure the user has required authorizations in 000 client.
best regds,
Alagammai.

Auto-reaction method not sending e-mail

Hi everyone,
We are trying to set-up email notificacions for cancelled jobs. So far I've configured SCOT and RZ20 succesfully. The alerts are triggered and the auto-reaction method is active and ready but it's not sending automatics e-mails. If I click on the auto-reaction method status and manually start auto-reaction method it sends the e-mails, but I haven't been able to make it work automatically.
So far I've read every possible thread in SAP forums about the issue and I also have checked the following notes:
Note 671780 - Only trigger auto-reaction method with certain alerts
Note 502959 - RZ20: External e-mail as auto-reaction
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 760821 - Auto-reactions no longer work with email
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 176492 - Automatic email when an alert occurs (RZ20)
I have tried all the possible control options for method CCMS_OnAlert_Email (currently is executed as a periodically job). I have checked all the jobs generated in RZ21 and still can't get it to work.
This e-mails alerts are to be triggered locally by each SAP productive system. I've already tried to configure this monitoring alert in two of our developing system with similar behaviour: no automatic e-mail is getting send.
Please, advice me on what I should do. I know I'm missing some
configuration but I can't figure out which one.
Best regards

Is the job SAP_CCMS_MONI_BATCH_DP running?
Please note the run time status: "Run required" means,
the alert was triggered, but the auto-reaction method does not start until the next time the CCMS method dispatcher (SAPMSSY8) runs. This can last up to 5 minutes if alerts are generated asynchronously (for example, by an active data collector).
However, the next time the CCMS method dispatcher runs, the auto-reaction method should be executed and the status of the node should be READY.
If the RUN_REQUIRED status does not disappear, it could be for a number of reasons:
- If MTE is present on the local system:
The auto-reaction method must not be defined as the central auto-reaction method.
- If MTE is present on another monitored system and a central auto-reaction method was defined:
Is one of the above true in your case?
An agent from the monitored system must be logged on to the central system, and this agent must be active. Please check whether these agents are active or not in Rz21 and try Re-Registering it.
You can also refer to SNOTE: 939616, 1265906
In the below link search for "RUN required"
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/945f2b9ee72222e10000000a42189d/content.htm
Regards,
Arjun

How to change Auto-reaction method automatically?

Hi all,
I want change the Auto-reaction method for few systems in the landscape,How to change the method automatically for all the system with out doing Manually in eash of the system.
Regards,
Neni

Hello
The below URL might be useful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201c3148-faef-2d10-ac80-e0a8bc7503a1?quicklink=index&overridelayout=true
Thanks & regards
bala

Auto-reaction methods for CCMSPING disappear

Hello,
I have a problem - I am using CCMSPING to monitor systems availability from one system and I have also assigned the auto-reaction methods to selected MTE attributes (system availability, system instance availability, ccmsping availability). The methods are local auto-reaction ones (executed in background). The problem is that after weekend, the assigned methods always disappear - they cannot be found in attribute properties dialog in RZ20. However, when checking in RZ21 for the where-used list for the methods previously assigned, I still get the list of attributes where they should be assigned.
Did anybody experience similar problem?
system info: sap_basis 7.0, sp11.
Thanks,
Tomas

Hi Tomas,
Is the same monitoring properties variant active when you assign the AR method before the weekend as when you come in on Monday? RZ21 >> Properties group box >> Properties variants.
When you assign the AR method in RZ20, take note of the active variant in the Additional info tab.
Is the monitoring properties variant assigned to an operation mode by any chance? This could switch it out if the op-mode is in the timetable or someone manually does a switch.

Two auto-reaction methods for one alert

Hi,
I wonder if it is possible to trigger 2 auto-reaction methods for one alert.
The 2 methods (tc RZ21) we want to use are :
1) Trigger a SNMP trap with method : CCMS_OnAlert_SNMP_TRAP
2) Trigger a Mail with method : ccms_send_alert_to_alm_ccms_container_v4
Those 2 templates are working fine if we use them separately.
I want to use them both for the same alert.
Are there methods, function module, reports,... available to handle this?
Hope somebody can help.
Regards
Paul Van Daele

Found the solution :
Note 727584 - CCMS : Triggering several auto-reaction methods for an alert

E-Mail Notification for KM Feedback

Dear All,
My requirement is to get the E-mail notification for some one posting feedback (repo service) for particular KM resouurces. I have made all the settings
Configured the Notificator Service
Enabled the Mailing Service
Configured the Email channel and Originator.
I have enabled Subscription for this KM folder like (/documents/Public Documents/Test Folder). If admin upload any document or files in the above folder.
I received E-Mail notification alert.
But for the same resources if any one posting feedback or review i didnt get any E-mail notification
How to achieve this?

Hi, THILLAI NATARAJAN.
The Feedback notification comes to the UWL of the person who has created the document (folder).
No E-Mails are sent, and subscription service does not work in that case.
If you want to fulfill your requirements you need to create a custom portal component which adds the Feedback to the resource and sends the E-Mails too.
Regards, Mikhail.

Can I have automatic e-mail setting for ADDM and AWR reports??

Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them, if at all I can do that then can I bound them to a particular time frame where I can recieve only those reports durin the peak usage of my database.
thanks

Hi Rohan,
Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them,You bet! I do it for all of my databases:
1 - Use a cron (or preferably dbms_scheduler) to schedule the awrrpt.sql execution, directing the report to a fixed file location (e.g. /tmp).
2 - As step 2 from the scheduled task, direct the report as input to sendmail:
For Windows:
http://www.dba-oracle.com/t_e_mail_interface_windows.htm
For Linux:
http://www.dba-oracle.com/t_email_mailing_messages_plsql.htm
For complete details of job scheduling, see Dr. Hall's book "Oracle Job Scheduling":
http://www.rampant-books.com/book_2005_1_scheduling.htm
Hope this helps. . . .
Donald K. Burleson
Oracle Press author

Parameters for Auto reaction method

Hi All,
I have done BPM for monitoring a batch job and a service desk message is generating every time the job is cancelled, by using an auto reaction method.
As the ticket is generating now, I want the job details also to come in the ticket. Like name of the job, variant, abap program etc...
Can anyone suggest how can I do this.
am using serv_desk_mess_on_alert auto reaction method, if any parameter we can include in this method so that the job which is cancelled, we will get the details of that along with the SD ticket.
Thanks
Tripti

its not possible...

Auto reaction method for transaction SMQ1

Hello
I'm monitoring queues RFC through RZ20, and I'd like to know wich auto-reaction method can I use to unblock the qRFC in transaction SMQ1 or this auto-reaction method don't exist?
Regards

Hi,
Error resolved.
I created a variant for program "RSQOWKEX" with the following attributes.
Queue Name - R3A*
Queue Destination - xxxCLNTxxx
No records later than - 00:05:00
No Running Queues box unchecked.
It has worked for me. Surprisingly, this issue only came up in DEV system. In Quality system, no such issue was there.
Thanks a Regards
Varun Taneja
You can use the above code and see if it helps.
Thanks
SM

How to set automatic e-mail alert for 90% threshold reach for MAXDBdatabase

Hi,
I want to set automate e-mail alert for 90% threshold reach for MAXDB database i.e. data area. I want to know where i can set the automate e-mail alert for data area in MAXDB database? As i have already have script for oracle tablespace alert if tablespace reaches 90% it sends me an auotmated e-mail.
Please let me know where to do the settings or any script available for MAXDB database data area automate e-mail alert....
Thanks,
Narendra

Hello,
What is the version of your database?
Are you SAP customer?
Please see the MAXDB documentation,
Review the Standard Events at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Glossary -> Event
And u201CMonitoring Free Memory in the Data Areau201D section at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Database Administration
-> Monitoring Databases
see example at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Tutorials ->Database Manager CLI Tutorial
-> Using the Event Dispatcher Function
-> Event-Controlled Sending of E-mails
Thank you and best regards, Natalia Khlopina

E-mail notification for order lines maintained with an invalid license

Hello Experts,
I have a requirement to develop an e-mail notification for order lines maintained with an invalid license.
T-Code VA01, this mail will be triggered if order has been blocked due to invalid or no license at the time of saving.
we can add email notification by using some user exit. Can you please guide me on how to go about looking for the appropiate user exit. Or any other suggestions.
Thanks,
Abhishek

Abhishek,
check this
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Re: va01 user-exit....
http://www.allinterview.com/showanswers/69164.html
Thanks
Bala Duvvuri

Turn off e-mail notification for Find My iPhone

In iOS 8.0.2, how do you turn off the automatic e-mail notification you receive when someone tries to locate your device via Find My iPhone app?

This notification occurs every time you log into Find My iPhone on the iPhone if you log out of it before you use it again. Find My iPhone will automatically log out each time you leave it if you do not have a passcode on your device. If you have a passcode on the phone and the log into Find My iPhone, it will only notify you that time. It will remain logged into Find My iPhone and you will not receive another email unless you log in from another device. If you do a search of the forum, you will find a rather lengthy recent discussion about this same issue and may find additional answers to your question.

Auto-Reaction Method - External Operating System Command

Hello ,
I am trying to run a script (test.cmd) on a monitored java system out of solution manager via ccms auto-reaction method, but without success.
I have created a RFC Connection to the java system in transaction sm59, defined an external operation command in transaction sm69 (/usr/sap/test.cmd) and an auto-reaction method using that command. But when I test the command in transaction sm49 with the RFC connection as target destination, the command is executed on the local CEN system (SolutionManager system) instead of the monitored java system. I have no clue where's the problem???
Thanks for any help (points, points, points)
Mirko

Hi Anand,
can you please send me that doc too pleae.
[email protected]
I really appreciate your help.
Thanks,

Automatic SMS/Mail notification for local auto-reaction method

Similar Messages

Maybe you are looking for