Automatic software installation

Please help.
Need to automatically install / upgrade the software on users' computers.
Laptops, OS Windows7,
Computers in AD, administrator rights you do not have,
Users are not in the office, to the local network enter through VPN (Cisco Anyconnect).
I had an idea to install through Group Policy, but in the GPO installation occurs before or during user logon even when not connected VPN, and in some cases even the Internet is not connected.

Hello tyua,
Do you mean you want to deploy software in domain-joined computer connected by VPN?
Please take a look at the following article about deploy Applications in Configuration Manager.
https://technet.microsoft.com/en-us/library/gg682082.aspx?f=255&MSPPError=-2147217396
For more information about SCCM, it is recommended to ask in the TechNet SCCM forum.
https://social.technet.microsoft.com/Forums/en-us/home?category=systemcenter2012configurationmanager
The professionals there will be glad to help you.
About group policy issue, please post in TechNet Group policy forum.
https://social.technet.microsoft.com/Forums/Lync/en-US/home?forum=winserverGP
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Unable to automatically install Flash 12 over Flash 11 via GPO Software Installation

We have a GPO software installation to install Flash 12 to a group of Windows 7 64-bit workstations. It works fine on a system that has no previous version of Flash already installed, but when the workstation has Flash 11 installed, the installation fails with an error in the Windows application event viewer saying something referring to installation failed because the previous version of Flash could not be removed.
If we log into the computer and manually uninstall Flash, then the Flash 12 GPO assigned to the computers works at the next reboot. If we manually install Flash 12, by running the Flash installation file as the user, then 12 installs over 11.
I have seen this kind of issue when someone tries to install and older version of flash over a newer version, but I don't think we should be having these problems installing the latest version of Flash.
We have to go to each PC and manually remove Flash 11 before we can install Flash 12 and it is too much time and labor to keep doing this.
What can be done to fix this so that a GPO software installation of the Flash 12 MSI will forcefully replace older versions of Flash without being stopped by this error?

Hi lord_knikon,
I understand your frustration. We've had several users report this, however, we've not been able to reproduce. This happens with the online installer downloaded from get.adobe.com/flashplayer. We've not seen this with the offline installers, posted at the bottom of this help page, http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html. Please try using the offline installer and you should be able to get Flash Player installed on your system.
Maria

LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB. Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake. Windows 7 detects the printer, and in-fact installed the drivers for it automatically. However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
I have tried multiple USB ports and it's the same issue. I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer. The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer. If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver.
Anyone have some sort of idea regarding this issue?

Hi @KP_ ,
I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
Disconnect the USB cable.
Uninstall the software.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
HP LaserJet Full Feature Software and Driver.
Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
Test the printer.
Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

What causes post software installation stall and how can I avoid it?

I never had this problem before with Jaguar, but since I installed Tiger this past December, when I've installed some software updates, my computer has not been restarting normally when I followed the instruction to "restart".
It shuts down, there's the pause, then the chime sounds. The screen lights up and the spinning beach ball appears. So far, so good. That, however, is as far as the process gets. The beach ball just spins and spins and spins. I was patient, but waited to no end. Finally, I disconnected the power cord and let the battery run down.
Finally the screen went dark. I let the computer stay like that overnight. The next day, I reconnected the power cord, the chime sounded and the
computer started up successfully and worked normally. And the software was installed. This has happened three times, every time with a software update.
I have repaired the permissions and done other disk first aid from my install disk CD. And I've run the Tech Tool utility.
I don't know if any of that will address the problem. So I hope some one can give
me some idea what the problem is and what will permanently eliminate it, before I venture into any future software updates.
Thanks

It is normal for a restart after an update or software installation to take much longer than normal, and generally it should be left to do its thing - but not overnight!
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692

Delgate or give administrative athority to a user for simple client software installation

I have a new Server 2012 R2 machine. It contains a single domain with an Active Directory Domain Services configured. Currently there are 10 users been served by this server: roaming profiles, sharing of a printer, and sharing of some files. The setup is
very simple as you can see.
The client machines connected to the server all run a simple mapping software. From time to time, the software vendor that supplies the mapping software puts out patches and updates. From time to time, a user will want to install a peice of his or her
own software (examples: Google Earth; Yahoo Messanger).
The users are all responsible adults. I don't need to worry about them messing up their machines with malware. But I'm not available to the users all the time. Rignt now, I have to logon to the client machine each time to run the .exe file as myself (the
Administrator) to perform a software installation.
I don't want to give out my Administrator password. Is it possible to create a user (or allow an existing user) of the domain to have the right to install a peice of software on their own but without allowing this user to make other changes to the domain
or the server?
I appricate you taking the time to read my question. Please let me know if there's anything unclear in my inquiry.

Additionally, it is not at all uncommon to grant users local administrative privileges on their own machines. This does not involve granting them administrative permissions on the domain - just on their machine. As Domain Administrator, you would
still have local administrative access to each machine (Domain Admins are automatically added to the local administrators group).
I would suggest that you create a separate account for them on their machines that would be joined to the local administrator's group and that they only use that account when they need to install a patch or some allowed software. All other work should
be done under their regular, non-privileged account.
.:|:.:|:. tim

IBook freezing at start up after Automatic Software Updates

Hello All! I am new here and this is the first major issue I have had with my iBook since it was purchased back in 2004. Not sure what is going on with it...
I installed all the Automatic Software Updates, as I have always done in the past, then I shut the computer down for the day instead of restarting it. Since it gives you those two options so I choose Shut down. Well, the next morning my husband went to turn the computer on and it gave him trouble but then it finally started up but then as the screen turning on, it was jumpy with lines shooting up and down like crazy. So we force restarted it and then nothing. We removed the battery to see if that would help and it did at least let us get to the log in screen, slowly, but it got us there. Then, it froze. Restart, login, froze. Restart, logged in successfully, froze on desktop screen.
Not sure what to do now. Can anyone help? Let me know if you need any additional questions answered and I will so my best to answer them.
Thank you in advance for your time and help,
Kara

Hello Kara,
First of all, Welcome to the  Discussion forums!
I installed all the Automatic Software Updates
Normally, after installing updates to your software, it is wise to run the Repair Permissions function of Disk Utility found in your Utilities folder.
It sounds like something got corrupted doing the updates/shutdown.
I would try booting to your install cd/dvd and run the Repair Disk function. This is different than Repair Permissions from your HD's Disk Utility.
To do this:
Startup from your install cd/dvd while holding down the "c" key.
When the installer splash screen appears, ignore it, and go directly to the Installer Menu in your top Apple Menus and select Disk Utility.
When Disk Utility from the Install disk opens select your HD in the left pane and then select the First Aid Tab if not already selected and then click on Repair Disk button. If it finds errors it cannot repair you may need a more robust Disk Repair utility such as Disk Warrior or Tech Tool Pro.
If Disk Utility reports the disk has been repaired quit the Disk Utility and then quit the installer and reboot and see if you can now login normally and your desktop appears (unfrozen).
If it does startup normally, open Disk Utility from the HD and run the Repair Permissions function.
post back if you cannot boot to the install cd/dvd and run Repair Disk or if you have further comments or questions,
littleshoulders

Automatic software update – won't work (10.6.8)

Dear all,
my automatic software update has stopped working. It shows me the software that will be updated, starts the download, then the computer restarts and I type in my username and password – and then everything is back to what it was before. None of the listed softwares has been updated, and I can't find the reason it doesn't install any of these. There is no error message.
I've tried deleting the respective .plist file, but nothing has changed.
I work on a Mac Book where Snow Leopard 10.6.8 is installed.
I would be greatful for any helpful comments or step-by-step guides – I've tried to update some of the software manually but I would love the automatic update to work again.
Best,
cocopet

I get a screen telling me that some of the updates require a restart and I click ok to continue and restart now.
It's 9 programs by now:
- iDVD 7.1.2
- Remote desktop client update 3.5.3
- security update 2012-004 1.0
- iTunes 10.6.3
- Airport 5.6.1
- Update of Apple Software Installation Program 1.0
- Update of HP printer software 2.12
- Web-update 3.0.4
- iTunes 11.0.1

Software Installation GPO Issues

I'm currently trying to automate the installation of a MSI in Server 2012. It's going to be a computer config that will install anti virus software at startup (at least that's my end goal). However, I'm struggling in the troubleshooting process
in that I cannot get the GPO to work properly.
The steps I've taken thus far:
1) Deployed MSI package in Computer Config using full UNC to file share (giving domain user rights for the share)
2) Troubleshoot issue of Event ID 1129 which led me to believe its a syncing issue with the network/DC
- So I created another GPO Enabling Both "Startup policy processing time" and "Always wait for the network
at computer startup and logon"
3) Ran a GPUPDATE, restarted the PC (This is a wireless laptop - my test work station) and still no luck with the install
4) Double Checked that the PC/User account has Local Admin Rights
Now the issue is that Event Viewer doesn't tell me anything in regards to the failed GPO, which is leaving me quite baffled.
Any help or tips on how to successfully
Thanks!

> 1)Deployed MSI package in Computer Config using full UNC to file share
> (giving domain user rights for the share)
Should be "domain computers", not users...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Latest version of Software Installer

Hello to the Community,
does anyone know which was the latest version of the Software Installer?
Thanks in advance
Ralph (Germany)

Thanks for your answer... but I was asking for the predecessor of Software Update.
The background for my question is that I like the possibility to install new drivers by manually download the packages, extract the files to C:\DRIVERS and let the Software Installer do the rest. This is not fully automatically but makes the process very transparent. I did not find this function in the "new" Software Update tool.
My current version is 4.01.0615 (issue date Nov. 15, 2006). I am wondering whether this is the latest version or not (Software Installer is no longer available from the Lenovo support side).
Ralph

Solaris 7 Software Installation on x86 System Problem

Experienced error message "disk not found" just prior to Solaris execution of final installation process. This was during Interactive installation. Also recieved "cannot determine boot device name". Could not use set env command in order to set the boot device. It is telling us that there is no boot device set up. Need some information/commands that will enable me to get over this problem and complete the software installation.
This could very well be a simple fix, I just don't have the knowledge bas eto effect it. Please contact at [email protected] or 540 657-6585.
Thanks
Ken

I hope this can help you. I recently posted the similar question on the development group and got help from 'agood214' which I think is the best answer.
(All credit should be to agood214)
Okay, here's the followup and results for my install method.
1. It worked
2. Partition magic and Boot magic are not needed to make this happen.
3. Partition and boot magic do not recognize the solaris partitions on the second master IDE. In fact they give an error ( #110) and offer to "fix" the dirve which will corrupt the install of Solaris.
4. I had scanned the newsgroups and found a utiliuty called XOSL - Extended Operating System Loader at http://www.xosl.org it works like and absolute charm!
=== Other installation notes - mostly my machine is not on the Hardware Comaptibility List but I figured I'd give it a try. System is a K6-III 450 Mhz ( not on HCL) Iwill XA-100A Plus motherboard ( not on HCL ) Sblive PCI valueboard ( not on HCL ) Siig high speed serial board - PCI (not on HCL) Diamond 56k PCI modem ( not on HCL ) I had to remove the modem and serial card as well as dispable PnP in the BIOS.
Then everything loaded pretty normal.
====
agood214 was using two physical drivers, but I tried on one 13 GB Hard Drive with 4 partitions (Solaris7, Win98, Win2000, data-partition) and working beautifully. In my case, I didn't have to disable anything in the BIOS to get them work. Just read though the manual in XOSL if you want to use this boot-loader and it is very easy to install. NOTE: you can not use 'instant boot' in XOSL to boot with the combination of WIN-OS and Solaris. Besides it, everything is prefect.

Applying Software Installation Policy Is Taking Long Time During Boot Process

1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Printer Software Installer has stopped working

Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.

Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

I Installed the Apple Software Installer 1.0 Update Tonight

Hello-
I am not sure if this latest Software Update messed things up, but there are a lot of problems with my MBP now that I just noticed tonight after I installed this Apple Software Installer Update 1.0.
First off I am unable to watch any of the online videos like CBS nightly News, some of the BBC News Videos, as far as I can tell anything that shows its content on a video screen from the companies website. I updated Flash Player about 2 weeks ago to the current version because I started keepng Flash updated to the current version, someting I wish I would have never started. when I went to CBSnews.com, clicked on CBS Evening News, nothing (not even a video screen) shoes up but in small letters it says Please Upgrade Your Adobe Flash Player. According to adobe Flash (current versions for MacOS-Safari) I have the correct Flash version and I have watched these news broadcasts seveeral nights on ABC, CBS, and many other videos on mostly news websites. On ABC I noticed it tonight since I installed this Apple Software Installer 1.0 Update, it shows a blank video screen but in the middle it says, "This content requires Adobe Flash Player - Ver 10.1. (on top) and on the bottom is a link that says " Click here to get the latest version of Flash."
The latest version of Flash for a Mac using Safari is what I installed about 2 weeks ago and is 11.1.102.64. I am not sure what ABC means by 10.1. The versions confuse me, especially if I look in Safari under "Help"--> "Installed Plug-Ins", it usually just gives the first couple of numbers, but now I cannot even bring up "Installed Plug Ins" under Safari---Help---Installed Plug-Ins. it just gives me a blank screen.
Is it possible to uninstall an installed update? it is a major deal. any suggestions on what I should try? I know people who hate Adobe Flash (seems like there are a lot) will say get rid of Adone Flash. But whay would it stop showing me what is on the Installed Plug-Ins Page? Before, I just did this the other night, I open a new tab, go to Help on Safari's Menu bar to Help, then Installed Plug-Ins and it usually fills up the blank New Tab page with all the Installed Plug-ins. Down toward the end it will show me that Shockwave Player, I think Mac calls it is installed, and it just gives the first few numbers of the current version that is installed. Now I get no Installed Plug-Ins.
thanks for any assistance. I looked up in the suppot articles how to uninstall an installed Update. I was going to repair permissions, but I have only ever done that using the Operating Disk. that is how I was taught by a genius bar person several years ago, and I just kept up with it. when I repair permissions using Disk Utility from the dock, let's say I do a test run and 20 permissions come up, I repair them and nothing changes, but if I use the OS disk and repair the permissions, if there are a lot it will get rid of them all but it usually takes 2 runs at it. I know this is different from what most others say,

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Scheduling specific time of day for automatic software updates

How can one schedule a specific time of day (i.e. between 11:01 pm to 5.59 am when I have unlimited download availability) for an iMac to search for automatic software updates? System preferences only offer frequency, but no time option. If it is possible to schedule a specific time, will invoking the feature override the sleep function, wake up the machine and perform the software update and then let the machine go back to "sleep?" Thank you for all your help.

to clarify barney's suggestion, the following terminal command will download all available updates and put them in your Downloads folder.
softwareupdate -d --all
so what you need to do is this.
1. turn off automatic software update in software update system preferences.
2. make a cron or a launch daemon to run the above terminal command periodically at the time of your choosing. to make a launch daemon I recommend using lingon http://tuppis.com/lingon/
The daemon will only run if the computer is not asleep at the scheduled time so you might want to set to to wake/start shortly before that. this is done in system preferences->energy saver->schedule.
to install the updates once they are downloaded double-click on the pkg files and follow the instructions.

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Automatic software installation

Similar Messages

Maybe you are looking for