Automatic Split and MD67

Hello Gurus,
May I ask your advice/help on one of the issue/point I have during PIR creation.
Requirement is to have the monthly PIR at the last working day of the month which is working fine.
Here is what I did:
1. I defined distribution strategy (ZFCT) with Function S50 with 02 type
2. Defined Period Split (00001) for automatic split with 52 in first column (W. in D.) and 52 in 2nd column (No. wks) and distribution key ZFCT in last two columns.
3. Assigned period split to MRP Group for the required plant.
4. I also allocated Version and Split for auto splitting to reference.
after setting all these configuration, I created PIR monthly.
I was expecting that these PIRs should be split automatically to the last day of the month, but it did not.
Then I used MD67 to split these PIRs and I got the required results. PIRs were then split to last working day of the month.
Attached are screen shots showing MD04 screen before MD67 and after MD67.
Here my questions is, is it possible to have this split automatically without using MD67 OR is it mandatory to use MD67 to have it?
If I understand automatic split (also gone through various SCN posts), I am expecting it to be automatically as soon as I create the PIRs in MD61.
Kindly request your help/advice here.
Thanks.
Regards,
Sandeep Kumar

Hello
The IMG activity documentation provides the following information:
With the function "automatic splitting", planned independent requirements created using a reference are split automatically according to a period split that you define.
It means that PIRs will be automatically splitted when you are using a reference, for example, transfering from APO or from SOP.
If you are creating PIR manually, on transaction MD62 go to tab page: Sched. lines, menu: Edit -> Split perd online.
Otherwise, you should run MD67 to split the PIRs.
BR
Caetano

Similar Messages

  • MRS (Multi Resource Scheduling) - Automatic splitting and calc. of AA/RU

    I'm at a bit of a loss to figure out the cause of this issue I'm having.  In our Sandbox if I assign a demand to a resource and the criteria from the Automatic Assignment Split from the Planning Board Profile is met then the demand is automatically split.  In addition, the AA and RU columns are automatically updated to take into account the demand that was just assigned.  All this in Sandbox is occuring as I expected.  However, in our Development box, which is configured the same (the best I can tell), when I assign a demand to a resource that meets the Automatic Assignment Split criteria the demand is not split.  Also, the AA and RU does not get calculated, in fact, the RU continually shows 100%.  Any ideas where else I might go look?

  • Daily and weekly split in MD67

    Hi All,
    We have one requirement. we give requirement as per the fiscal period. (transfered from APO)
    Foe some materails we want that this PIR is spllitted in daily requirement for next four weeks and in weekly requirement for 48 weeks after that.
    Can you please advice if this can be achieved by MD67. I tried this but requirement is splitted in weeks but the daily splitt is not happening.
    Thanks, 
    S J

    Try to configure OMPH.
    Create spliting rule with week in days = # of week for daily split, No of week = # of week for weekly split, Dist.W = GLEI (equal distribution), Dist.M = GLEI (equal distribution).
    For Distribution key, configure using path Production -> Production planning ->Demand Management -> Planned indep.mgmt. -> Automatic split -> Distribution function for auto split -> Distribution strategy
    Use your splitting rule in MD67 in Period Split field.
    Hope it helps.

  • Automatically split your downloads to different hard drives?

    Hi all. I would like to automatically split my downloads over 2 separate HD's one on my computer the other a portable HardDisk. I would like my pics, music and apps to download to my computer and my TV Shows and Movies to my portable HD as they take up to much space on my computer. Is there an option in the settings in iTunes or on my Mac were you can choose separate destinations for your music, movies and TV Shows etc?
    Message was edited by: Carl Newton

    Carl Newton wrote:
    Is there an option in the settings in iTunes or on my Mac were you can choose separate destinations for your music, movies and TV Shows etc?
    no.
    you will have to change +*iTunes media folder location+* (preferences > advanced) manually each time you want specific content to be added to a specific location.
    JGG

  • Audition automatically splits stereo to mono when linked dynamically from Premiere Pro?

    I'm attempting to clean up audio from premiere. Upon linking the sequence, my stereo track is automatically split into two monos. I do not want this. This only occurs on my machine too. Both of my coworker's machines don't do this. I must have different importing setting active, but I can't find them to change them. No where during the dynamic link workflow does it ask you if you'd like to import this way.
    How/where do I fix this?

    I've since made a workaround of exporting the two mono from audition as stereo, and then working off that clip.
    But I've kept the tracks as they were. In the screen grab, you can see that there's track 1_1, and track 1_2. Followed by Track 1 below it, which is a stereo track.
    The clip you see is the stereo file I've made.
    If this is too confusing, and can redo my original workflow and show you the results.

  • How To Automatically Split A Large Clip Into Smaller Clips

    I captured several one-hour tapes with an older version of Windows Movie Maker. 
    They are AVI files.
    I'd like to work with the footage when I purchase Premiere Pro CS5.5 or CS6.
    Each tape is composed of several starts and stops of the record button, so lots of individual clips inside of the hour-long captured footage.
    In Premiere Pro CS 5.5, is there a way to automatically split a large clip into smaller clips at the points where I started and stopped the camera?
    Any help is greatly appreciated.

    Flyingfish,
    I cannot tell you that.
    Historically, with "consumer" CODEC's, PrE often gets native support, before PrPro.
    However, with "professional" CODEC's, such as RED, PrPro has those, but PrE will likely never get them. There are some pro CODEC's, that PrPro does have, that PrE is missing, but I do not have a list.
    Good luck, and wish that I had more info for you.
    Hunt

  • Auto batch split and auto batch determination

    Hi Experts,
    I want to know what are the settings for automatic batch splitting and automatic batch determination?
    Thanks in advance,
    Jyoti

    For automtatic batch determination assign the search strategy with batch check indicator in OPL8 transaction for order types. And in transaction OPJ2 enable the indicator BD (batch determination) for order type.
    Batch splits can only be triggered manually in the production order. For this the material master record of the material must specify that the material is managed in batches and batches must exist for the material. You can split the batches in order from change mode by selecting the opeartions and go to split the batch..you will get the pop-up for all existing batches then here you can assign the quantities for the operation from batches and save.
    No automatic batch splits in production orders.
    If helps rewards points.
    Regards
    TAJUDDIN

  • Automatically split screen for two windows like in windows 7

    how can i automatically split screen for two windows like in windows 7, without drag and move, which is very inefficient.
    thanks!

    and the lightbulb went off in my head :-P
    The one I couldn't remember the name of is HyperDock and I believe it was a recent version which added the functionality you're after. I haven't tried it though so I'd be interested in your opinion of it.

  • I was syncing my iPhone5 to iTunes and then my phone automatically locked and now it won't turn back on

    I was syncing my phone to itunes and then my phone automatically locked and now it won't turn back on but when i plug it into a charger it makes the charging sound.

    Hi lemmag17,
    If your iPhone doesn't appear to be responding or turning on, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • StringTokenizer vs. split and empty strings -- some clarification please?

    Hi everybody,
    I posted a question that was sort of similar to this once, asking if it was best to convert any StringTokenizers to calls to split when parsing strings, but this one is a little different. I rarely use split, because if there are consecutive delimiters, it gives empty strings in the array it returns, which I don't want. On the other hand, I know StringTokenizer is slower, but it doesn't give empty strings with consecutive delimiters. I would use split much more often if there was a way to use it and not have to check every array element to make sure it isn't the empty string. I think I may have misunderstood the javadoc to some extent--could anyone explain to me why split causes empty strings and StringTokenizer doesn't?
    Thanks,
    Jezzica85

    Because they are different?
    Tokenizers are designed to return tokens, whereas split is simply splitting the String up into bits. They have different purposes
    and uses to be honest. I believe the results of previous discussions of this have indicated that Tokenizers are slightly (very
    slightly and not really meaningfully) faster and tokenizers do have the option of return delimiters as well which can be useful
    and is a functionality not present in just a straight split.
    However. split and regex in general are newer additions to the Java platform and they do have some advantages. The most
    obvious being that you cannot use a tokenizer to split up values where the delimiter is multiple characters and you can with
    split.
    So in general the advice given to you was good, because split gives you more flexibility down the road. If you don't want
    the empty strings then yes just read them and throw them away.
    Edited by: cotton.m on Mar 6, 2008 7:34 AM
    goddamned stupid forum formatting

  • HELP! I shut down my macbook pro and now after applications have been in full screen mode for awhile they automatically minimize and it takes me back to the desktop. How do I fix this?

    I shut down my macbook and now while applications such as safari have been open for awhile, even while active, will automatically minimize and it take me back to the desktop.  How do I fix this?

    I should add that this has happened before and I feel like it was a quick un-toggling of a box in my settings, but I can not remember what to do.

  • Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

  • Stop Automatic creation and confirmation of Transafer Order for a doc type

    Hello All,
    There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
    The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
    Can u please provide the .steps involved for thie case.
    Thanks
    Chandrashekhar

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

  • Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

    Hello,
    We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
    The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
    Can someone throw more light on the customizing/BADI/enhancements etc required??
    Thanks and Regards..

    Hi koen,
    I tried with the FM that you suggested...
    But somehow with the process type 'stock removal' gives an error...
    Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
    how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
    Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
    Thanks in advance,
    Rashmi.

  • Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

    Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

    What Scanner and scanware are you using....?
    Check out > Mac Basics: Using a scanner
    I only use Image Capture and it always sends my photos to wherever I tell it to.

Maybe you are looking for