Automatic storage location view creation in maintenace order (IW31)

Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PM

Hi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards

Similar Messages

Automatic Storage Location determination based on Customer in SO Creation

Hi Guru,
We have the scenario where some customer goods need to be out from the bonded WH, and Some customer will always take the goods from General WH, can i know if there is a way to maintain the default storage location based on which customer?
Thank you very much,
Regards,
Chee Wee

Dear Chee Wee,
First, Storage location will not be defaulted in Sales order with std system settings. Still if you want to automate storage location , you have to use exist.
Include: MV45AFZB
Form Exit: USEREXIT_CHECK_VBAP
Based on Customer you can bypass sales process ( whether goods can procure externally or produce internally),
but not default the storage location based on Customer.
Regards,
Reazuddin MD

Needed config settings for automatic storage location

hi,
sap gurus,
configuration settings needed for automatic storage location at sales order level.
it is coming by using OVL3 at delivery document level.
but we need it sales order level.
regards,
balaji.t

Hi Balaji,
In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
However to map your requirement of having Storage location determination in the Sales order do the following:
In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
Hope the same works for you!!
Regards,
Ajinkya

Automatic storage location

Hi
Where we will do Automatic storage location configuration in SPRO settings ?
Please any one give answer
Thanks & Regards,
senthil.

Hi
In OMJJ you can flag the Create Storage location automatically for all the Movemnt types.
This Creation of Storage location will work only in case of Good receipt Postings only.
Thanks & Regards
Kishore

Automatic storage location determination based on delivery document type

Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
Ramesh

Dear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks

Regarding how enable plant stock and storage location view

hi all:
   Could you please tell me how enable plant stock and storage location view for MM01?
   couldn't be better if there are detailed steps .
   Thank you very much!

Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks.

Automatic storage location for a material

Hi,
Can anybody help on following issue-
Could we set up by Material number for each plant, which Default storage location ( and/or shipping point ) will automatically show up in order entry.
Pls. guide.
Regards

Hello,
Your requirements are standard & can be met.
Automatic/default Shipping Point:
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Shipping Conditions.
You enter the shipping conditions in the customer master - sales area data - shipping screen. Also in the sales document type configuration in VOV8, you can enter the shipping point. If you enter the shipping point in the sales document then this entry will overwrite the entry of the customer master.
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Loading Groups.
You enter the loading group in the material master - sales: general/plant data screen.
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points.
Here you will find as under:
Shipping conditions + Loading group + Plant = Shipping Point.
Default Storage location:
Go to IMG - logistics execution - shipping - picking - Determine Picking Location - Define Storage Conditions.
Here you define the storage conditions which you enter in the material master - General Plant Data / Storage screen.
Now go to IMG - logistics execution - shipping - picking - Determine Picking Location - Assign Picking Locations.
Here you will find as under:
Shipping Point + Plantb + Storage conditions = Storage location.
Maintain the data in the customer as well as material master correctly & the assignments should be as per the data maintained. Then whenever you will create a sales order, the system will determine the default shipping point & the storage location.
Reward points if solution helps.
With best regards,
Allabaqsh G. Patil.

Need to change Storage location for reservations in production order

During Production order creation we need to assign storage location against all the reservations in production order. Is there a way it can be done??

Hi,
check the user exit EXIT_SAPLCOSD_001.
Sudheer.A

Change default storage location during creation of PO

Hello all,
I have the following question.
When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
I need to change this default, because the storage location must be determined in another way.
So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
For this I probably need a BAPI.
Can anyone tell me which BAPI to use and how I can implement this?
Because I also no experience with BAPI's.
Thanks in advance.
Kind regards,
Marco

Hi Van,
You need to goto SE18 -> give 'ME_PROCESS_PO_CUST' in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
<text removes>
Thanks,
Siva
Message was edited by: Matthew Billingham - don't ask for points

Automatic Storage location at the time of GR

Dear Gurus,
How can we make customization that the storage locations to come by default as given in Material Master while doing the Goods Receipt?
Pls provide speedy answer.
For example if I have given storage location as Raw material store in material master then it should come automatically while I do MIGO and without manually entering the same.
Regards
Shash

Dear Shash
If you want Storage Location automatic when Goods Receipt, please fill Storage Location in:
- PO when you issue manual (ME21N)
- Purchase Requisition if PO convert from Purchase Requisition (create Purchase Requisition - ME51N).
- Material Master (MM01) If you issue PO from PlOrd convert to Purchase Requisition and Purchase Requisition to PO.
Regards,
Thang

Determining automatic Storage location in RE

Hello Gurus
Im new to SAP and came came across this problem, I would grateful if you help me out.
I want that while creating delivery with reference to RE sales document the storage location should be determined automatically.
Is it possible and how?

Welcome to the forum. As a new member, I would like to inform you that there are certain rules and regulations applicable to this forum which you can find to your right screen where it has also been indicated that posting basic / repeated query is not allowed. Please search in this forum or Google it with the same text, so that you will find many threads discussed on the same topic. Take the inputs from there and update still if you are not able to resolve. Meanwhile, this thread would be locked.
G. Lakshmipathi

Making Storage Location field mandatory in Work Order

Hi
As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
So, I want to make storage location field mandatory in components tab of work order.
Also I want to avoid the users to deliberately removing the storage location and making it blank.
Regards
Prakash

Hi,
You will have to use one of the below mentioned user exits to accomplsih this requirement.
CNEX0026 Maintenance order: General check for material
CNEX0027 Maintenance order: Determination of plant or storage location for component
Thanks
Narasimhan

BATCH SPLIT AUTOMATIC STORAGE LOCATION AND WEIGHT DETERMINATION IN DELIVERY

DEAR,
PLZ SUGGEST ME HOW TO DO CONFIGURATION IN BATCH DETERMINATION SUCH THAT WHILE DOING BATCH SPLIT WHEN I PUT THE BATCHES MANUALLY THE STORAGE LOCATION AND ITS SPECIFIC WEIGHT WILL COME AUTOMATICALLY .
REGARDS,
DEBESH TRIPATHY

Hi ,
You have to use the user exit as mentioned by lakshmipathi above and take the help of ababer to modify it.
V02V0002 - User exit for storage location determination
Also go through this link for user exit for delivery
http://www.sap-img.com/abap/list-of-user-exit-related-to-vl01n.htm
Regards,
Krishna O

Automatic storage location selection while doing usage decision

hi gurus,
My client wants to do automatic determination of storage location depending upon usage decision.
i.e. if usage decision is reject than gr to be done at rejection storage location. if usage decision is accepted than gr to be done at respective storage location.
The storage location can be changed manually but they require automatic determination of storage location.
Regards,
Deven

hi, deven,
go to qs51, select catalog 3 enter plant
select selected set that u used for the plant that u select
in posting proposal ud tab u select inventory posting automatically for return delivery , unrestricted stock etc
u just r & d with in that t code
if u get solution please share with me too
regards,
umesh

Storage Location priority in Stock Transfer Order

Hi Friends
We are starting to use stock transfers (STO) from one plant to another plant and will have same product / batch in multiple locations in the sending plant. Is it possible specify that this Stock Transfer Order in sending plant needs to pull material from a certain location when I create the STO?
For example if material X ,Batch Y is present in SLoc 0001 ,0002,0003 the material X stock needs to be first pulled from 0001 and if it is not present in 0001 then it should pick from Sloc 0002 and then followed by Sloc 0003.
Thanks in Advance
Raj

Hi,
To achieve this, you have to settings for Stock determination strategy
Navigation :
SPRO - IMG - Material management - Inventory Management and Physical Inventory - Stock Determination - Define Strategies for Stock Determination
Maintain strategy for stock determination
Priority wised storage location numbers and Batch/Valuation types.
Then you program first check stock availability in the first priority storage location. If stock is there, then system will pick. Other wise , it will go for the second priority storage location.
Regards
KRK

Automatic storage location view creation in maintenace order (IW31)

Similar Messages

Maybe you are looking for