Automatic sync is only available for external memory?

Hi. I am using Windows Media Player 12 on Windows 7 with an 8 GB Clip+ fitted with a 32 GB memory card. The USB mode is set to MTP. I have set up automatic sync in WMP for the externeal memory. However the option to "Start sync when device connects" is greyed-out for internal memory. Am I doing something wrong? Thanks.

I'll leave matters to the sync gurus--I'm an old-fashioned drag-and-drop/copy-and-paste guy.
As to MTP mode--I agree with you, it sounds attractive. But there can be glitches with it, unfortunately, including its renaming of files--yuck. In contrast, MSC mode just works and is easy to use. And pretty much everything that you can do with MTP mode can be done with MSC mode, apart from the play of DRM-protected files such as some library items (if you need that, stay with MTP--or, I guess, switch when you need it).
Recommended that you clean away whatever user files you have on your player placed there under MTP mode, set to MSC mode, and reload your content. (Reason: your computer can only see the files on your player that were put there under the USB mode that you are now connected to your player under. Hence, a good reason to use a single USB mode and not switch, as well as not to use the "Auto" mode which indeed can switch between USB modes, without your knowledge.)

Similar Messages

Hard disk has no more space available for application memory

I keep this getting this error after my applications freeze for several minutes.
"Your hard disk has no more space available for application memory."
I have 1 drive with 160 GB and 46 GB available. I'm pretty sure that's plenty of free space. And why does my memory need my drive? I've got 2.5 GB of memory. That should be plenty sufficient to run Safari without needing virtual memory.
Help!

Hello! OSX uses a virtual memory scheme and even though you have a lot of ram it still utilizes the paging file. Panther 10.3.9 and below runs maintenance routines very early in the morning to clear temp files and other stuff. If you don't normally leave it on 24/7 then you may need to consider a utility to clear the temp files and do the routine maintenance. Tiger 10.4+ runs these automatically. I suggest leaving it on all night for a day or so and then restarting and see if the problem clears up. Here's a list of utilities such as Macjanitor.Tom
Utilities

New MacAir error states "your Mac OSX startup disk has no more space available for application memory" All I have added is MS Office

My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari. I have only added MS Office to the computer and Carbonite. Any suggestions?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?

MAC startup disc has no more space available for application memory.

I have a new mac, very little memory being used, and only a few programs being run...safari, i-tunes, etc. This error window keeps coming up "Your Mac OS X Start up disc has no more space available for application memory. To aviod problems, quit any applications and close windows you are not using. removing files you are not using from your start up disc will help". This window will come up with only finder and safari running, no other applications running. This has been going on for several weeks now off and on. What is causing this and what can I do?

I've had safari, mail and itunes open for a bit this afternoon. Terminal is showing (0) pages in and (0) pages out. I'll continue to keep them open and see what happens and report back if it changes! Here's the rest of the data showing at this time.
Processes: 49 total, 5 running, 44 sleeping, 260 threads 16:02:59
Load Avg: 0.07, 0.20, 0.16 CPU usage: 1.44% user, 2.65% sys, 95.90% idle
SharedLibs: 7052K resident, 10M data, 0B linkedit.
MemRegions: 18435 total, 501M resident, 15M private, 564M shared.
PhysMem: 817M wired, 803M active, 265M inactive, 1886M used, 2206M free.
VM: 122G vsize, 1041M framework vsize, 91422(0) pageins, 0(0) pageouts.
Networks: packets: 261079/251M in, 215760/24M out.
Disks: 106874/1947M read, 143722/2035M written.

Msg states: "your Mac os x startup disk has no more space available for application memory...Removing files from startup disk may help." yet, I have 299.11GB of 319.73GB available. Why is msg received?

The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea?

The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea?

"Your Mac OSX startup disk has no more space available for application memory" - uploading files problem

Hi everyone,
I'm running a late-2012 27 inch iMac - 3.4GHz Intel Core i7, 32GB 1600 MHz DDR3 with the 3TB fusion drive, OS 10.8.4. At present there is 1.92TB of available storage.
I have received this message "Your Mac OSX startup disk has no more space available for application memory" just before a full on crash multiple times in the past couple of days whilst using WeTransfer to send over some large files (500MB+). The applications I have had open at the time have been: Activity Monitor, App Store, Firefox, and Finder. Over the course of uploading the files, the active system memory has gone from 1.04GB and steadily increased until it more or less maxes out around 29GB, at which point the Page Outs rocket up to around 40GB/s and the swap memory fills up pretty quickly until the computer basically can't take any more and blacks out.
This is a pretty new thing, haven't really had an issues before. My main software used: Sibelius 7 & Logic Pro X. I've also recently started working with Final Cut Pro X, which seems to have been struggling at points. I've tried closing everything, restarting the computer and not opening anything (specifically NOT FCPX) before attempting an upload. I've even gone so far as to remove FCPX from my system, and yet the problem is still recurring. Both "kernal_task" and "WindowServer" have been running high on CPU when these problems have occurred.
Does anyone know what might be the issue and how it could possibly be resolved?
Really appreciate any help, I'm in the middle of a fairly sizeable project and the deadlines are just around the corner.
Thanks,
Tom

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

When I open my iMac, I get this message - Your Mac OS X startup disk has no more space available for application memory. ???????

When I open my iMac, I get the following message : Your Mac OS X startup disk has no more space available for application memory. Then it says to quit applications not in usw and to close windows and remove files from startup disk. It lists Safari, email and Finder. I force a quit on all applications yet the same message comes up every time I open an application. What do I do to get rid of this once and for all? The computer is not even two years old and is only used for email and Safari. Help will be greatly appreciated,

The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Mac os x startup disk has no more space available for application memory

Suddenly over the past 2-3 weeks, first my iMac, then my Mac Pro both started giving me the pop-up error message: "Your mac os x startup disk has no more space available for application memory" offering for me to Force Quit open applications. Which does not work. Restarting temporarily helps, but the error will eventually return.
I have over 50% available in HD space on the iMac.
Also, I do not know if this is related, but the computers are running very slowly as well.
Additionally, before all of this, our Contact data, sync with Mobile Me, tripled in size with duplicates and jumbled messages.
Seemed like a cascade of failures beginning with contacts and ending with the memory error.
I have tried Applejack several times to no avail.
Any one have any ideas? Thanks.

CMCSK wrote:
first my iMac, then my Mac Pro
I have over 50% available in HD space on the iMac.
What about the Mac Pro? How large is your hard drive on both computers?
Problem first appeared on the iMac, then the MacPro starting giving the same error.
MacPro 999.5 GB total, 277 GB available
iMac 499.76 GB total, 214 GB available
"Your mac os x startup disk has no more space available for application memory"
Is FileVault enabled?
Never (unless it turned on itself)
have tried Applejack several times to no avail.
Have you tried using _Disk Utility from your install disc?_
From the HD, but not from from install disk. I will dig it out and try it.
Did you run Apple's Hardware Test?
Where do I find this?
Did you disconnect all peripherals except for the keyboard & mice while troubleshooting?
I did not since I am having the same problem on 2 different computers.
the computers are running very slowly as well.
Check the items in the Login Items. Delete or disable all you do not need.

IMac 5 running Mountain Lion I get message "your Mac OSX start up disc has no more space available for application memory" I have moved approx. 6 apps from the dock but still get same message,what e

Receiving message "your Mac OSX start up disc has no more space available for application memory."
This has just started in past week, I removed about 6 apps from dock to see if it cleared it but message still appears. Mac is iMac 5 with Mountain Lion (10.8.4)
Would appreciate some help.
Barb

The message has nothing to do with available disk space. There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

How do I correct a "Force Quit Applications" message? Your Mac OS X startup disc has no more space available for application memory.

My MacBook Pro is giving me teh following message box. "Your Mac OS X startup disk has no space available for application memory" How do I correct this to improve the MacBook's performance?

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
Another process often implicated in memory leaks is "inkjet8," which is a component of the HP printing softwre. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while

Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

Error Message: Your mac osx startup disk has no more space available for application memory.

Hi everyone:
I have a 2010 27" imac. Dual Core i3, 3.2 GHz and 8GB of 1333MHz DDR3 RAM, and a 90% empty 500 GB Hard Drive. Running Snow Leopard 10.6.6
I have received a message intermittently since I got the iMac. The Force Quit menu comes up and says "Your mac osx startupdisk has no more space available for application memory". Sometimes there are a few applications open. Sometimes none. Whenever I look in the Activity Monitor Utility I see 2 or 3 gigs of RAM still available for use, and lots of hard drive space.
Im not sure why I'm getting the message, nor what to do to rectify it. Quitting applications, like it suggests doesn't seem to help.
I am grateful for any advice.
Lauren

Hey Lauren.
First of all you do have some software updates you should be doing. 10.6.7 came out a few weeks ago. Sometimes doing all of your software updates resolve issues such as this.
To check for software updates click the Apple and then Software updates.
As this issue is someone broad, I would test one of the articles below to narrow down your issue.
http://support.apple.com/kb/HT1199?viewlocale=en_US
http://support.apple.com/kb/TS1388?viewlocale=en_US
Let me know if you need extra ideas.
Regards,
Britt.

How to install a big program that is only available for PC on a Mac.

Hi everyone,
I really need help about that, I've just start a new job that requiered 20-20 Design, witch is only support by PC. But I don't want change my Mac for PC My iMac has Bootcamp already so I need to know, if I'm installing Windows Vista or 7 (witch is requiered by my program/software...I don't know how I'm suppose to call it in english), will I be able to make it work? And if it can help, my 20-20 design is working with an USB key not an installation CD. I've read a lot of topics but no one answer my question
Thanks for your help....you can save my life, my job and my Mac :P

How to install a big program that is only available for PC on a Mac.
Run the Boot Camp Setup Assistant. Install Windows. Install your "big program"

HT201209 So I have redeemed my $25 iTunes Gift Card on my iPad Gen4. Will this $25 be available for in App purchases or App purchases or is it only available for the use of purchasing music or other media through iTunes?

I have redeemed my $25 Gift Card and was wondering if that $25 can be redeemed for in app purchases or other app purchases or is it only available for music or media purchases through iTunes?

You can use an iTunes gift card for app, music, movies and other media.To redeem one see:
iTunes Store: How to redeem a code

AC:U only available for shipping

Anyone know why Assassin's Creed: Unity is only available for shipping on both the PS4 and X1 version? I know each store is gonna have like a zillion copies. Why can't I pre-order and select in-store pick up?

Hi DannyEndurance,
There are a few reasons why pre-order items on BestBuy.com may not be available for store pickup. In most situations though, this can generally be attributed to the item being an online-only product or all expected inventory having been already allocated to existing orders. While we can't provide any specifics here or details on upcoming product availability, I'd encourage you to keep an eye on BestBuy.com for updates the closer we get to the release date. Remember that you can also pre-order many titles we carry by visiting your local Best Buy store.
Thanks for your interest in pre-ordering Assassin's Creed: Unity with us!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Automatic sync is only available for external memory?

Similar Messages

Maybe you are looking for