Automatic Tasks are assigning to the user even the Vacation rule Enabled

Hi Experts,
I have enabled a Vacation rule in bpm/workspace.
But I can see all the tasks assigned in the inbox for that user.
Then I have enabled the Customized rule as the vacation rule and tried to reassign the tasks to an another user.
That is also not happening. Tasks are assigning to the other user.
Our ECM version is 11.1.1.6.0
Went through all the documentations and couldn't find the solution..
Thanks,
Nir

Hi Nir,
When you said
But I can see all the tasks assigned in the inbox for that user.
do you mean the instances that were previously assigned to the user are still there in the user's queue?
Vacation rules let you reassign or delegate tasks assigned to a user once the vacation period begins. If work items are already in their queue before the vacation rule goes into effect, they remain in the person's queue. It's up to the user to reassign or delegate the existing work item instances that were already in their queue.
New instances that arrive once the rule goes into effect however, should be automatically reassigned (or delegated depending on the vacation rule's radio button selected) to the other person.
Dan Atwood

Similar Messages

Initiator Task not visible to other users in the Group

Hi
JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
All the users in the group are able to Initiate the Task.
But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
Thanks for any help
Sameer

Hi Ashwini
Thanks for replying.
I did the same and it was working for me even if the Type is Single.
I just gave the Group name and all users were able to see the task. This is fine with me.
I just observed one more thing.
When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
But the data entered by the creator is not seen by other users.
There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
Other users in the group are able to see the task and the saved data, but are not able to Submit.
What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
Is there a way to make the payload data only to save but not to claim the task?
Thanks and Regards
Sameer

The user and the mailbox are in different Active Directory Sites

Hi All,
I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
to create extest user.
Then I try to execute command to test-connectivity, but it failed.
Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
AuthenticationMethod :
MailboxServer : CONMBX02.contoso.com
LocalSite : CONMBX02.contoso.com
SecureAccess : False
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : DRCCAS01
LocalSiteShortName : CONMBX02
ClientAccessServer : DRCCAS01.contoso.com
Scenario : Reset Credentials
ScenarioDescription : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
MBX02.contoso.com.
PerformanceCounterName :
Result : Failure
Error : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
t_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
different Active Directory sites..
UserName : extest_xxxxxxxx
StartTime : 04/01/2012 20:46:19
LaCONcy : 00:00:00.0156460
EventType : Error
LaCONcyInMillisecondsString :
Identity :
IsValid : True
WARNING: No Client Access servers were tested.
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
Events : {Source: MSExchange Monitoring OWAConnectivity Internal
Id: 1005
Type: Error
Message: Couldn't access one or more test mailboxes.
The service that is being tested will not run against these mailboxes.
Detailed information:
Local Site:DRCProduction
[Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
t Active Directory sites..
PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
Counter: Logon LaCONcy
Instance: DRCCAS01.contoso.com|DRCProduction
Value: -1000}
any help appreciate it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Hi
   Removed existing test account on two site.
   Then created test account on DGC through new-TestCasConnectivityUser.ps1.
   Flushed Health Service on RMS.
Terence Yu
TechNet Community Support
Hi
What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Customizing Message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer spezific text or to redirekt to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check these threads.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Cusomize message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer specific text or to redirect to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check this thread.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Is there a way to automatically add a page to my current form when the user marks the check box?

I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
Thanks,

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.

Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

How can I make a survey automatically identify the user in the results?

How can I make a survey automatically identify the user in the results (so that it won't be anonymous)?

I am not sure what information to provide. Here is what I am trying to do. I am trying to create an HR questionnaire with multiple choice questions and several multiline textboxes to capture comments. I want to send it out by email address and/or embed the questionnaire somewhere on the company's intranet website. But we don't want the questionnaire to be anonymous. If someone makes a particular comment, we want to be able to communicate with the person who made that particular comment. How would we be able to trace the person? By email address, or by user ID?

Team Calendar warning - No Team setup for the user in the selection period.

Good morning,
I am attempting to replace the older iViews (leaverequestapprover and teamcalendar) with the newer iView (approveleaverequest) which seems to combine the two functions.
When implementing the approveleaverequest iView, I get the following mesaage "No Team setup for the user in the selection period. Contact Administrator."
However, looking at the older Team Calendar iView, teamcalendar, I can see the team. Both iViews are assigned to the Team page for comparison.
Not sure what's wrong but I'm confident I have all the configuration correct else the test team members wouldn't be appearing in the older iView. I've read some other unanswered posts that asked the same question and rechecked all the objects people had suggested.
What's even more puzzling, if I have one of my managers submit a leave request to their manager, the approveleaverequest iView will show the entire team with the leave request for the manager waiting for approval.
I'm stumped and could use some guidance on how to get the team calendar to work.
Kind Regards,
Garrett Meredith

Re: Manager unable to approve employee leave
chk above thread once and chk any authorisations are missing or else assign and test once for some users
and you need to activate wdabap business function ess_wda_2 in swf5 if ur using abap functionality HCM, ESS on Web Dynpro ABAP 2 - Human Capital Management - SAP Library

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

To identify the user running the job at runtime

Hi All,
My requirement is to develop a program which need to send mail only if a particular user runs the job.
I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime.
Please suggest me the possible ways of identifying the user running the job at runtime.
Thanks in advance!!!
Regards,
Dinesh.

"I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime."
This is not true if your program/form/method is called inside the ABAP report which is executing in the batch job step. There, the active SY-UNAME is the user entered in SM36 as the job step user. It is not the user who planned/scheduled the job.
It is unclear from your description where your program is actually running. Is it another (ABAP) step belonging to the same job or is it actually some routine called within the same job step that you are checking or is it a program totally unrelated to the batch job in question (in that case, check out the other answers about TBTCO/TBTCP)
- Alex

How to get personnel number of the user in the wd java code in Leave reques

Hi all,
we are using the standard Leave Request Applicatin ESS.
can any one please tell me how to get the personnel number of the user in the WD java code?
cause i have pass the pernr number to a bapi and get the details.
please help me its urgent.
thanks in advance.

Hi Madhu,
Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
If you hav any doubt, please let me know.
Regards,
Jithin

Automatic Tasks are assigning to the user even the Vacation rule Enabled

Similar Messages

Maybe you are looking for