Automatic text comparison does not work from child to Master in CUA

Hi,
When trying to transfer role specifications to CUA master from our child system the application log is displaying as seen in slg1.png.
On our master system we are running 7.31 SP7 which is fine according to Note 1642106.
Our client system is 7.31 sp5 and there for we went to note 1141736 and installed note 1580217 as the other three notes is not compatible with our system.
we have also implemented the switch "CUA_AUTO_TXTCMP_ROLE" with YES in table USR_CUST on both systems.
The "error" does not go away and the "synchronization" does not seem to be activated between the systems.

Hi,
This is a list of many Routing Modems and routers
http://portforward.com/routers.htm
AS you will see the Netgear section is quite long.
Of those that are Wireless most will be G type devices.
I am not saying DO the Port Forwarding.
If you click on your Model and then Dismiss the Advert in the next page > Then Choose iChat in the Next List you will be told the Default Access info
Most likely this will be 192.168.0.1 and admin and password as the Default Info.
Once in the Set up pages you need to Check the menu on the left for UPnP and make sure it is Enabled (No Need for Port Forwarding then).
In the WAN Page you need to Disable DOS (Or SPI) and Allow Response to Internet Pings on the WAN port.
The 4500 was a typo, sorry about that. Should have read 500kbps
On Adding Buddies.
Apple Names (@Mac.com and @me.com) and AIM ones need to be added to an AIM Buddy list.
By that I mean one that Logs into AIM.
If you have a @mac.com name then you should have selected the @mac.com option when choosing the Account type.
See the Drop down item in the middle of this Start Up Screen
From http://www.ralphjohns.co.uk/versions/ichatvers4/howtoStartiChat.html
Similarly you need to chose the account type the Buddy is as well.
More info with pics
So adding the Apple Test accounts requires that you type the same info as the iChat Software adds the @mac.com when you chose to add an @mac.com Buddy
Sample of middle Drop down in Add Buddy but set to @me.com instead
If you have a Jabber ID (And GoogleMail names work as GoogleTalk IDs and they are Jabber as well) you can add Jabber Buddies as well.
There is a way with some Jabber Servers to Add the ability to Text chat to MSN and Yahoo Buddies.
7:51 PM Monday; May 11, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

  • For Acrobat 9. TouchUp Text tool does not work.

    Acrobat 9. TouchUp text tool does not work --- even on documents created with my computer using installed fonts. Problem 2: when trying to export to Word 2010 there is no option for format .dox, only .doc which belonged to earlier versions of Word.

    Hi Begin,
    I have the same issue, I am not sure which version so I had on my old computer but when I got a new windows 7 64bit, and asked IT to install Adobe, my life turned upside down. now they asked if I need X or 9pro and I though 9pro is the latest and greatest.. they installed the standard first then could not edit then asked for the pro and could not edit ... now I search and maybe version X will edit but if the document is signed and we do need to do lots of editing after the signature then what is the solution??
    I hope the Guru in Adobe can help here soon please :-)!!
    Joseph

  • In 5s, personal hot spot does not work from time to time. Not detected

    In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.  

    Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
    also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

  • I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

    I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

    The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

  • Text replacement does not work in Safari

    Text replacement does not work in Safari forms etc. Is it me or a bug?

    Interesting… I have eee set to auto-correct to an email address.
    if I type a few words and then add eee it works. But if I just enter eee in the email address of a form it does not.

  • Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

    :Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
    I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
    I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
    Maybe some of you might help me, I would highly appreciate that.
    Kind regards
    Guyfromgermany

    Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

  • Text substitution does not work on all apps

    Text substituiton feature works fine in Mac Mail, but does not work in Microsoft Word, excel and others.
    How can I fix this?

    Word and Excel do not support the system level text substitution routines. These work only with native apps like Mail, TextEdit and so forth. Some third-party apps can also tap into them.
    The workaround is simple:
    Preferences>AutoCorrect
    Word will allow you to create any number of text substitutions. They won't, though, interact with native apps like Mail.
    Microsoft Outlook, being more of a native OS X app, does support the system level text functions.

  • Automatic approval workflow does not work anymore

    Hi,
    Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
    After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
    - The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
    - We applied a new SP (SP07) not that long ago.
    - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
    001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
    However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
    Any input is very much appreciated.
    Kind regards,
    Tim

    Hi Balaji,
    In SRM 7.0,
    Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
    - The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
    - - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
    001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
    However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
    Any input is very much appreciated.
    Regards,
    Shears

  • Error: ELM does not work from UI

    Hello guru´s,
    hard to explain this briefly, but here it goes.
    We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
    Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
    Thanks in advance.

    SunSudio Express (December 2006 release) introduces some
    interesting new features, but there are still problems. For the first time,
    I was able to debug Fortran 90 applications in Linux, but debugging is
    still very limited. This is good to know that you were able to debug a f90 application
    on Linux. What problems do you see? Please, report them, and we
    will file them as bugs or RFEs (requests for enhancements).
    Furthermore, the Fortran error parser does not work, even when
    compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
    This is a heavy disadvantage. I assume that Fortran error parsing
    is not supported on Linux, although the tutorials don't make this
    point clear: Yes, it does not work yet on all platforms.
    In the Options window, there are settings concerning C/C++ (and
    its parser), but there are no similar options for the Fortran parser,
    even in "Advanced Settings" (which are similar to the old Options
    window). There will be similar options for Fortran.
    My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
    We do not target Debian system, but we assume everything
    should work there (we test on Red Hat and SUSE).
    Good to know that our assumption is correct :-)
    I don't think that I'm doing something wrong, but I want to ask, just
    to be sure: has someone had seen the Fortran error parser working
    on Linux? No. It does not work on Linux, and it does not work on other platforms.
    What about Fortran word completion? No, this feature is not implemented yet.
    Thanks you for trying Sun Studio 12 Express release and for your report.
    Nik

  • Magic mouse forward backward swiping does not work from time to time

    Hello...
    from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
    Can anyone help?
    Regards
    Bjoern

    your answer should be here.
    http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0

  • Icloud log in with Apple id  does not work from my mac when i try to run on photo stream

    When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

    yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

  • Automatic sleep/shutdown does not work.

    I work for Micro Center's Apple Department, and we have 12 Macs on display. To aid with shutting down our store, each computer is set to automatic shutdown or sleep. When the dialog box opens "This Mac will shut down in 60 seconds," the counter does not go down, and the computer stays on indefinitely. This happens with all of our Macs. With 10.5 Leopard, this did not happen. Since upgrading to 10.6, this has ceased to function, including each sequential update.
    My theory is it has something to do with the Guest Account, though this is not likely since we've had it this way before in 10.5 and it worked fine.
    Any thoughts?

    Ha! No answer to your question. I have the same problem. Computer simply doesn't go int sleep mode as set in the energy saving prefs. Seems to be a real bug! Why does Apple not react?

  • Swf file does not work from InDesign

    I am not sure if this is a Flash or InDesign question, so i will post on both..
    I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic. 
    I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
    any help would be appreciated.
    thanks
    mattG

    You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
    And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

  • In yahoo mail my automatic address insertion does not work with firefox but does with explorer please tell me how to fix this as it is stressful and makes me want to throw your program and my computer and the internet out the window

    When i go to start a new email in yahoo mail the aoutomatic insertion feature that lets me type just a few letters then fills in the rest of the email address do not work in firefox

    *Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
    *Tools > Options > Privacy > History: "Remember search and form history"
    See also [[Form autocomplete]]

  • Links to discussion in a discussion board does not work from a Custom View

    Hi,
    I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
    The solution to do this is to created a new few where I set the item limit.
    .. or so I thought.
    The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine. 
    Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
    With the standard subject view where it works:
    Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
    With my custom view where nothing happens when I click the link:
    Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
    Thank you

    check this post
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
    Another article
    http://technet.microsoft.com/en-us/library/cc768269.aspx

Maybe you are looking for