Automatic Time Bug

Apart from the alarm bug, does anyone still share the automatic time problem? When my six week old phone is programmed to set the time automatically, the time is always six minutes behind. Tried all the recommended resetting procedures but to no avail.

I do. My iphone shows +1 hour difference. The strange thing (to me) is that if I go to the clocks, it shows the correct time for my location. But the displayed time in the iphone status bar is wrong, and so the alarms are triggered at the wrong time.
Anyone has some info about this problem? I mostly find links to the alarm bug in google, not about my problem.

Similar Messages

  • Alarm & Automatic time update problem ?

    I was wondering if anyone is experiencing a similar problem - I've just discovered this and it's too late to call Club Nokia
    I am on Orange in the UK, and we are currently in British Summer Time. I have set my alarm to go off at a particular time and afterwards the time seems to automatically revert back to GMT. Is this a known problem on the Nokia N70 ?
    I have also tried deliberately changing the time on my phone to a couple of hours off, and then switching the automatic time updating system on, and it hasn't changed the time on the phone - this leads me to suspect that Orange doesn't implement this feature (as it doesn't implement the cell info display feature) but if so then this points to the alarm feature being a bug in Nokia's firmware ?
    Anyone experienced this or has any enlightening information ?
    Thanks in advance
    Regards
    Edward
    Regards,
    Edward

    27-Apr-2006
    04:43 AM
    steve_p wrote:
    Hi Edward,
    You are correct about the cell info display. Orange don't use it. Sometimes you will see it if roaming abroad on other networks.
    I've also briefly suffered exactly what you have described about time reverting to GMT from BST. I put it down to a broacast cell being incorrectly configured.
    About a month ago I was working abroad in Republic of Ireland and the clocks had just moved forwards. The hotel I was staying at (in fact I could narrow it down to the room I was in) was in a zone where my phone repeatedly reverted to GMT. However, as soon as I had travelled to my work site, the phone was 100% back on correct BST. Travelled back in the evening and the phone invariably stayed at the correct time but come the next morning it had reverted back to GMT at some point overnight. My phone has only ever exhibited this behaviour for those few days at that one hotel otherwise it's been perfect. I have my phone on auto time update all the time.
    Strange eh? I put it down to a local issue of the cell that happened to cover the hotel. Perhaps your home cell location suffers the same issue? Only thing I can think of.
    S.
    Hmm - it does sound like a network type problem in that case although if so that means the cell where I live has never been configured correctly because I always get this problem - but only when setting the alarm (it never happened on the old Nokia 6230 I have). I reported it to Orange yesterday, and they quote a 24hour response time from their techie guys so I am hoping for some information back today.
    Any ideas why it might be happening with an alarm clock ? When I deliberately misconfigured my phone's time and set auto time update on, it never corrected the time so why correct it when the clock goes off ?
    Thanks for your help and the info
    Regards
    Edward
    Regards,
    Edward

  • Automatic time zone wrong, automatic time zone wrong

    Has anyone at Apple figured out a fix for the "Automatic Time Zone" bug?
    Up until about a month ago, my phone (4, 16 gig) was working fine. Now it won't recognize any new time zones, and I have to set them manually. It's rather annoying.

    You can run Repair Disk from the Restore  Partiton your HD. Restart the computer, when you hear the startup tone choose the Restore Partition and then open Repair Disk. However I'd be surprised if that has anything to do it with it. You should run Repair Disk Permissions at least 2x, and then if you want run Repair Disk. Then restart the computer in Safe Mode to clear some caches. Then restart normal and check the Time Zone.
    I also suspect you don't have iCloud setup correctly. You should check in Address Book preferences and see if you have duplicate accounts, I suspect you do. If I'm correct that would create duplicate entries.

  • Automatic Time Confirmation for an operation in a Maintenance Order (IW41)

    Hello,
    We have a requirement to do automatic time confirmation (while saving the order) on an operation when the user selects "DONE" standard text key on Operation line item. Is there a user exit or BADI available in Plant Maintenance that can be used for Automatic time confirmation?
    I went through some of the user exist/BADI in PM and didn't find anything for automatic time confirmation. The only thing that I found useful was user exit CONFPM03 (which allows to carry our own checks once and operation is selected for confirmation).
    Appreciate your responses. Thanks

    Hi ,
    Normally thru confirmation we enter actual hrs worked in IW41 .. but if you do not want to run that tcode then not sure of any BADI but i would suggest you to create a Z Programme which runs as a batch job at some 30min everyday . The Z Programme checks all the PM orders of particular order type  which are with  released status and then gets into operations and checks for standard text and if its value is DONE then calls programme SAPLCORU - IW41 Programme .. you can suitably put a variant for that batch job .. plz check the option with ABAPer ..
    regrds
    pushpa

  • Automatic time conversion is not possible

    Hi Friends,
    I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
    Thanks
    Narasimha

    Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
    Map your fiscper field from source to fiscal year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
    For Posting period
    Map your fiscper field from source to fiscper3 year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
    This will give you the required output.
    Regards,
    AL

  • Automatic time zone conversion in web dynpro

    We have a WDA running on top of a SAP system that is running on US time. The data from the WDA must be stored in SAP using US time. The WDA will however run in England and needs to display English time to the users. Is there any mechanism or concept in web dynpro that provides automatic time conversion when reading from and displaying time and when writing data back to the database? Some kind of  screen exit or other?
    I am not asking how to convert the value of a single field from one time zone to another, I am hoping for some general solution to the problem of time zones in web dynpro.
    Thanks!

    I don't really have anything useful to say, but couldn't help to add my two cents here...
    Whenever you work in a system that supports users or other parties spread among different time zones you start wishing for some better time zone support. It's not just the user's time zone that is relevant, just imagine for example a service call to a call center in India, where probably the customer's time zone is even more important than the user time zone.
    I know that in principle we have some design issue here, because standalone dates (without any time details) are impossible to convert among different time zones. It would be nice though if the system would provide a framework where any date/time fields can be registered and linked to some time zone field. Changing the time zone field, would automatically update all registered date/time fields.
    Ideally the field for choosing time zones would have the ability to show a list of preferred time zones with (changeable) explanations. One could for example imagine that by default it's populated with the two entries for user time zone and system time zone. Each application should be able to register additional time zones, e.g. sold-to time zone for an order, etc.
    Another (workaround) option I used in applications (for automatically filled read-only fields, like creation date/time) is to settle on one reasonable default time zone (e.g. user) and then have tool tips showing dates/times in other relevant time zones.
    Anyhow, lots of half-baked gibberish, essentially I just wanted to say that it would be nice to have some better time zone support, so I'm voting for that as well (good point Chris). And ideally this would not be limited to web dynpro. I'm sure some smart person should be able to come up with something nice...
    Cheers, harald

  • Automatic time option is missing

    Im missing the "automatic time" option on my L920. Is there any way to enable it? Will gdr2 fix this problem? Why such a basic function is missing? Pls advice, help....

    toshibasz wrote:
    I think its unbranded (under mobile operator it says 000-DE). Here its the same prob: http://discussions.nokia.com/t5/Nokia-Lumia/Automatic-date-time-for-Lumia-920/td-p/1630196
    My man problem is when i travel i have to set time mannualy. With Android i thnk the time is set automaticly by the google servers not by operator (not sure about this). Anyhow as i said, it is perfectly working on HTC 8X. 
    What does it say under Settings > About the under phone information > Carrier. Mine says CV_GB which means it is an unbranded GB country variant. If yours is unbranded it will say something similar except it will have your countries two letter code. However, if it is a network handset it will tell you what network the phone was meant for, even if it's been unlocked afterwards. 

  • How to create automatic timer process in BPM?

    Can anyone tell me how to create an automatic timer process in BPM?
    Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event?
    Thank you

    Hi,
    You can make use of Global Automatic activity to kick off your process at a particular time. Place a Global Automatic activity in your process and right click on the Global Automatic activity and select Properties --> General --> Global Automatic Type: Automatic Schedule, Automatic Schedule: <Configure with your requirement>.
    Else you can make use of due transition/timer activity to get your task done.
    Bibhu

  • Automatic Time Card Generation not generating Time Card

    Hi,
    I am running the program 'Automatic Time Card Generation'. The log file showing the message
    'The process did not generate any timecards for the Payroll, Payroll Period selected'.
    And there is no time card for the given Payroll month.
    Any suggestion for this.
    Many many thanks in advance.
    Regards,
    Subrat

    Please check metalink note 282547.1 to see it is relevant to your issue

  • Eror in automatic time & date setting

    Suddenly the automatic time & date function in System Preferences is returning an incorrect time. I am shown in the correct time zone (EDT), but using the automatic setting puts the time ahead by 4 hours. I believe that would be GMT. Cannot figure out why it would do this. I am using an early-2008 MacBook Pro running Mac OS 10.8.2.
    Intrerestingly, my iPhone 4S running iOS 6 is showing the correct time.
    Anyone else experiencing this, or have any ideas how do return to the correct time?

    see if this link helps  http://www.apple.com/support/ical/

  • When I try to set the automatic time zone on my iPad in Settings all I get is the "waiting" wheel constantly turning.    The only way to set the time is in the manual mode.  Does anyone else have this problem?  Thanks!

    When I try to set the automatic time zone on my iPad wi-fi mini in Settings all I get is the "waiting" wheel constantly turning. 
    The only way to set the time is in the manual mode.
    How to solve this problem?
    Thanks!

    You must be connected to a good wifi network for it to reach an outside time server.

  • Automatic time zone stuck with the previous location

    Hi everybody,
    I wanted to use automatic time zone option but it doesn't work at all. When I ask to search for my location, it shows my previous location not current. I restart my Wi-Fi modem, restore the default settings, delate "com.apple.timezone.auto.plist" nothing helps.
    Thanks in advance for any hints!

    The Mac may be trying to find its location by looking in a database of WiFi locations. If you brought your WiFi router from your old location, it may still be located in your original location in the data base. If they are using Skyhook you can update it yourself.
    <http://skyhookwireless.com/howitworks/submit_ap.php>
    Otherwise you will just have to not use the automatic setting until your WiFi router gets detected and its location updated.

  • Automatic time zone detection

    Hello, I'm having a problem detecting automatic time zone on a macbook air. If i set location detection on automatic it detects it in Moskow- Russia and it's about 900 kilometers from my current location (Toila-Estonia). It's i big problem, because new feature on iCloud that can show current location of mac shows my posision in Moskow. Any suggestions why it's so ?
    Sorry for my bad English.
    Aleksandr

    This is happening to both my spouse (TURBO 32GB) and I (TURBO 64GB). The first time she noticed was three days ago. Her phone was correct at home (Pacific time zone), but when she got to Seatac airport, her phone was in Alaska time zone. Yesterday, I went downtown and my phone's time went back an hour and the time zone was set to Alaska. At home, it is correctly set to Pacific with correct time. It is correct right now, but her's is wrong right now (she's downtown). Seems like something wrong in the information the phone is receiving off the network, but could it be the phones? This wasn't happening a week ago. Thanks for any thoughts.

  • Automatic time zone wrong post 2/21/14 security update

    Updated ipad air and iphone 5s with new security update today.  For some reason, automatic time zone is now indicating I am in Chicago(central time) even though I am in Cincinnati, OH (eastern time). Anybody else having this problem?

    Hi all,
    i came also across this problem. If you use APEX automatic time zone detection you only get a time zone like '+01:00'. This is insufficient to handle Daylight Savings for TIMESTMAP WITH (LOCAL) TIME ZONE in the past or in the future that differ to the current Daylight Savings.
    Try the following:
    If you set your time zone to something like 'Europe/Berlin' then Oracle correctly stores/converts the data. To get this more exact timezone information, use jsTimezoneDetect (https://bitbucket.org/pellepim/jstimezonedetect/downloads) on the login page and store the result in a (hidden) item. In the page processing after the login handling, set the time zone.

  • Automatic time zone error

    Out of the blue automatic time zone shows that I reside in Seoul-Korea when I'm actually in Jakarta-Indonesia. It messes up the date and time as a result. It works just fine before yesterday.
    Anybody knows what happen?
    The solution is quite I easy, I just turn the automatic time zone off and set my location manually.
    Thanks, logamberat.

    This is happening to both my spouse (TURBO 32GB) and I (TURBO 64GB). The first time she noticed was three days ago. Her phone was correct at home (Pacific time zone), but when she got to Seatac airport, her phone was in Alaska time zone. Yesterday, I went downtown and my phone's time went back an hour and the time zone was set to Alaska. At home, it is correctly set to Pacific with correct time. It is correct right now, but her's is wrong right now (she's downtown). Seems like something wrong in the information the phone is receiving off the network, but could it be the phones? This wasn't happening a week ago. Thanks for any thoughts.

Maybe you are looking for