Automatic Time Card Generation not generating Time Card

Hi,
I am running the program 'Automatic Time Card Generation'. The log file showing the message
'The process did not generate any timecards for the Payroll, Payroll Period selected'.
And there is no time card for the given Payroll month.
Any suggestion for this.
Many many thanks in advance.
Regards,
Subrat

Please check metalink note 282547.1 to see it is relevant to your issue

Similar Messages

  • Income tax is not generating on Bonus for second time through off cycle

    Dear All,
    I have an issue related to bonus. We have given bonus off cycle in the month of August 16th  income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle  in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
    We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
    Let me know where it went wrong.
    Rgds,
    Prasad

    Hi Narendra,
    Thanx for the response, i tried the above but not generating WT/460.  can you explain the logic.,
    Changed BON5 to BON3
    created new Tax code ZTDR from STDR
    Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
    didn't understand why /401 or MTDR or 9TDR
    Thanks
    Sanm

  • Why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

    why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

    I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Mac OS X
    iPod not recognized in iTunes and Mac Desktop
    MacBook and MacBook Air: iPod won't mount when connected via USB hub
    What to do if your computer won't recognize a USB or FireWire device
    Thanks,
    Matt M. 

  • Batch number is not generating by the system at the time of Goods receipt

    Dear All,
    This is regarding Batch number that the system generates internaly at the time of Goods receipt,but the same is not generating the batch number.
    I checked all the configs but i could not trace it out.Can any one help me to solve the issue.
    Thanks in advance,
    With Regards
    Vinod

    Hi,
    Follow the steps:
    1.Field---VFDAT adn table-MCHA should be created as a charecter in CT04signed to a class in CL02N.
    2.create MM01 and add the class to it in classification view.
    3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
    4.OMJ5- activate SLED for your plant and mvt type 201.
    5.opj2- set BD for your plant.
    6.create sort sequence in cu70 and assign your charecteristic value to it.
    7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
    8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
    Repeat the above step and enter diffrent values for SLED details.
    So now two batches are created with SLED as the charecteristic.
    9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
    Reg,
    Deepak.

  • Automatic time conversion is not possible

    Hi Friends,
    I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
    Thanks
    Narasimha

    Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
    Map your fiscper field from source to fiscal year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
    For Posting period
    Map your fiscper field from source to fiscper3 year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
    This will give you the required output.
    Regards,
    AL

  • [svn:fx-trunk] 12077: Although Spark RichText does not support link formats , modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions .

    Revision: 12077
    Revision: 12077
    Author:   [email protected]
    Date:     2009-11-20 18:16:32 -0800 (Fri, 20 Nov 2009)
    Log Message:
    Although Spark RichText does not support link formats, modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions.
    Removing references to Flex Builder 3 in RPC.
    QE notes: N/A
    Doc notes: N/A
    Bugs:
    SDK-24305 - Link format property nodes cause errors on RichText in FXG 2.0
    SDK-24322 - A couple references to Flex Builder 3 in Flex 4 LangRef (and code comments)
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24305
        http://bugs.adobe.com/jira/browse/SDK-24322
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/XMLDecoder.as
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

  • Automatic Time Confirmation for an operation in a Maintenance Order (IW41)

    Hello,
    We have a requirement to do automatic time confirmation (while saving the order) on an operation when the user selects "DONE" standard text key on Operation line item. Is there a user exit or BADI available in Plant Maintenance that can be used for Automatic time confirmation?
    I went through some of the user exist/BADI in PM and didn't find anything for automatic time confirmation. The only thing that I found useful was user exit CONFPM03 (which allows to carry our own checks once and operation is selected for confirmation).
    Appreciate your responses. Thanks

    Hi ,
    Normally thru confirmation we enter actual hrs worked in IW41 .. but if you do not want to run that tcode then not sure of any BADI but i would suggest you to create a Z Programme which runs as a batch job at some 30min everyday . The Z Programme checks all the PM orders of particular order type  which are with  released status and then gets into operations and checks for standard text and if its value is DONE then calls programme SAPLCORU - IW41 Programme .. you can suitably put a variant for that batch job .. plz check the option with ABAPer ..
    regrds
    pushpa

  • Automatic time zone conversion in web dynpro

    We have a WDA running on top of a SAP system that is running on US time. The data from the WDA must be stored in SAP using US time. The WDA will however run in England and needs to display English time to the users. Is there any mechanism or concept in web dynpro that provides automatic time conversion when reading from and displaying time and when writing data back to the database? Some kind of  screen exit or other?
    I am not asking how to convert the value of a single field from one time zone to another, I am hoping for some general solution to the problem of time zones in web dynpro.
    Thanks!

    I don't really have anything useful to say, but couldn't help to add my two cents here...
    Whenever you work in a system that supports users or other parties spread among different time zones you start wishing for some better time zone support. It's not just the user's time zone that is relevant, just imagine for example a service call to a call center in India, where probably the customer's time zone is even more important than the user time zone.
    I know that in principle we have some design issue here, because standalone dates (without any time details) are impossible to convert among different time zones. It would be nice though if the system would provide a framework where any date/time fields can be registered and linked to some time zone field. Changing the time zone field, would automatically update all registered date/time fields.
    Ideally the field for choosing time zones would have the ability to show a list of preferred time zones with (changeable) explanations. One could for example imagine that by default it's populated with the two entries for user time zone and system time zone. Each application should be able to register additional time zones, e.g. sold-to time zone for an order, etc.
    Another (workaround) option I used in applications (for automatically filled read-only fields, like creation date/time) is to settle on one reasonable default time zone (e.g. user) and then have tool tips showing dates/times in other relevant time zones.
    Anyhow, lots of half-baked gibberish, essentially I just wanted to say that it would be nice to have some better time zone support, so I'm voting for that as well (good point Chris). And ideally this would not be limited to web dynpro. I'm sure some smart person should be able to come up with something nice...
    Cheers, harald

  • Automatic time option is missing

    Im missing the "automatic time" option on my L920. Is there any way to enable it? Will gdr2 fix this problem? Why such a basic function is missing? Pls advice, help....

    toshibasz wrote:
    I think its unbranded (under mobile operator it says 000-DE). Here its the same prob: http://discussions.nokia.com/t5/Nokia-Lumia/Automatic-date-time-for-Lumia-920/td-p/1630196
    My man problem is when i travel i have to set time mannualy. With Android i thnk the time is set automaticly by the google servers not by operator (not sure about this). Anyhow as i said, it is perfectly working on HTC 8X. 
    What does it say under Settings > About the under phone information > Carrier. Mine says CV_GB which means it is an unbranded GB country variant. If yours is unbranded it will say something similar except it will have your countries two letter code. However, if it is a network handset it will tell you what network the phone was meant for, even if it's been unlocked afterwards. 

  • Automatic time zone stuck with the previous location

    Hi everybody,
    I wanted to use automatic time zone option but it doesn't work at all. When I ask to search for my location, it shows my previous location not current. I restart my Wi-Fi modem, restore the default settings, delate "com.apple.timezone.auto.plist" nothing helps.
    Thanks in advance for any hints!

    The Mac may be trying to find its location by looking in a database of WiFi locations. If you brought your WiFi router from your old location, it may still be located in your original location in the data base. If they are using Skyhook you can update it yourself.
    <http://skyhookwireless.com/howitworks/submit_ap.php>
    Otherwise you will just have to not use the automatic setting until your WiFi router gets detected and its location updated.

  • Unwanted automatic time change for no reason

    I've got a 6021 that changes time by one or two hours for no apparent reason whether it's in automatic time adjust or not.
    The firmware version is 4.10 092005; has it been improved since then?
    CK

    Yes, current version is 04.90. A firmware upgrade should sort out the problem for you
    Best Regards
    Dave

  • Creating  Transformations -- Automatic Rules not Generating

    Hi All,
    I am Trying to create Transformations from Data source to DSO,
    Automatic Rules not Generating, I have more that 120 Objects in DSO but it is generating only 2 roles , I am manually creating remaining rules …
    For automatic rules generation what I have to do ???
    Regards,
    Shaik

    Hi Anil,
    Thanks for quick Response ,
    I am trying this , I am installing Transfer rules from BC, once Transfer rules  Activate, I think it will work,
    I need to know from u is this right way to do this????
    Regards
    Shaik

  • Automatic time update is 2 minutes out?

    Does anyone know how the automatic time update function works on the Nokia 701 and the like? Mine is enabled and seems to update when my phone connects to a data source (e.g. when retrieving email or when browsing websites) but the time retrieved seems to be about two minutes slow. Where does the phone get it's time signal from? Is this a network thing (i.e. it is Orange that is running slow) or does it obtain the time from a Nokia server?
    Finally can I change the server it obtains the time from?

    Firstly, it is not possible to change servers. As this feature does not require positioning info on the phone and does not require a data connection, I would suggest that it is a network thing. As you travel around the globe, your phone retrieves local time infor from the network you are roaming on. I've been leaving my phones on auto time for as long as I can remember and it used to work as well on my 8310, 6230 etc. with no data connection. I would contact Orange and ask they check their clock. 

  • Automatic Time Change

    Hi there,
    winter time is back in Europe... however, my iPhone 3G iOS4, although setting "automatic time change" is on, did not change to winter time. As soon as I switch off "automatic time change" it shows the correct (changed) winter time. What might the problem be?
    Thanks
    Christian

    Thanks, but when inserting the SIM into another cell phone it works 100 %. Putting it into a second iPhone and it does not work. So seems to be an iPhone issue. Even after restaring any of my iPhones it takes the old time.

  • Automatic Time Bug

    Apart from the alarm bug, does anyone still share the automatic time problem? When my six week old phone is programmed to set the time automatically, the time is always six minutes behind. Tried all the recommended resetting procedures but to no avail.

    I do. My iphone shows +1 hour difference. The strange thing (to me) is that if I go to the clocks, it shows the correct time for my location. But the displayed time in the iphone status bar is wrong, and so the alarms are triggered at the wrong time.
    Anyone has some info about this problem? I mostly find links to the alarm bug in google, not about my problem.

Maybe you are looking for