Automatic time conversion is not possible

Hi Friends,
I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
Thanks
Narasimha

Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
Map your fiscper field from source to fiscal year--Rule type Routine.
RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
For Posting period
Map your fiscper field from source to fiscper3 year--Rule type Routine.
RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
This will give you the required output.
Regards,
AL

Similar Messages

  • Time Machine Backup not possible (normal external Hard drive)

    Hi,
    has anyone else had the problem that after the Lion upgrade its not possible to even really access your external time machine?
    i have a 1TB Samsung HD103SI Media and when it tries to boot up it wont show in finder, i can see it in the disk drive utility and try to repair it but it only gets me an error saying i have to reformat that drive?
    i hope this can somehow be fixed otherwise all my backups are gone

    Hi,
    Sorry to hear about your Issue...
    Was your Samsung Formatted to Mac OS Entended (journaled) when you first started using it with TM...?
    If so see the Troubleshooting Section in this Link to Pondinis excellent Tips on Time Machine...
    http://web.me.com/pondini/AppleTips/Index.html
    Cheers,
    You may also find the TM references in this Link of Interest...
    http://web.me.com/pondini/AppleTips/LionChanges.html

  • Automatic Time Card Generation not generating Time Card

    Hi,
    I am running the program 'Automatic Time Card Generation'. The log file showing the message
    'The process did not generate any timecards for the Payroll, Payroll Period selected'.
    And there is no time card for the given Payroll month.
    Any suggestion for this.
    Many many thanks in advance.
    Regards,
    Subrat

    Please check metalink note 282547.1 to see it is relevant to your issue

  • Automatic "Time and Date" not available in iPhone OS 3.1

    I could set "Time and Date" to "Automatic" in 3.0.1. Now this option has dissapeared on my iPhone, I can only set time manually. Anyone else noticed this? Is there any solution? Thank you in advance!

    Thank you for your opinion. I really appreciate it.

  • The automatic time syncronisation (ntp) not working

    Why it not funktion?
    ... com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    ... ntpdate[707]: no server suitable for synchronization found

    Hello and welcome to the Apple boards.
    Did this just happen with the 10.5.2 update or was it not working before up upgraded?
    I know that some updates have changed network settings in the past.
    Have you re-selected the server in your Time and Date Preferences
    Message was edited by: nerowolfe

  • Automatic Clearing (F.13) not possible for two different year GR/IR document

    Dear Expats
    We are facing one problem.
    Through automatic clearing F.13 we are unable to clear the GR and IR document.
    GR document posing date in 2013
    IR document posting date in 2014
    How can we will solve the issue?
    Regards
    Tarek H Chy

    Dear Christian
    Thanks for your feedback
    As per advice i have remove the year
    Clear over the year document.
    Regards
    Tarek

  • Automatic time zone conversion in web dynpro

    We have a WDA running on top of a SAP system that is running on US time. The data from the WDA must be stored in SAP using US time. The WDA will however run in England and needs to display English time to the users. Is there any mechanism or concept in web dynpro that provides automatic time conversion when reading from and displaying time and when writing data back to the database? Some kind of  screen exit or other?
    I am not asking how to convert the value of a single field from one time zone to another, I am hoping for some general solution to the problem of time zones in web dynpro.
    Thanks!

    I don't really have anything useful to say, but couldn't help to add my two cents here...
    Whenever you work in a system that supports users or other parties spread among different time zones you start wishing for some better time zone support. It's not just the user's time zone that is relevant, just imagine for example a service call to a call center in India, where probably the customer's time zone is even more important than the user time zone.
    I know that in principle we have some design issue here, because standalone dates (without any time details) are impossible to convert among different time zones. It would be nice though if the system would provide a framework where any date/time fields can be registered and linked to some time zone field. Changing the time zone field, would automatically update all registered date/time fields.
    Ideally the field for choosing time zones would have the ability to show a list of preferred time zones with (changeable) explanations. One could for example imagine that by default it's populated with the two entries for user time zone and system time zone. Each application should be able to register additional time zones, e.g. sold-to time zone for an order, etc.
    Another (workaround) option I used in applications (for automatically filled read-only fields, like creation date/time) is to settle on one reasonable default time zone (e.g. user) and then have tool tips showing dates/times in other relevant time zones.
    Anyhow, lots of half-baked gibberish, essentially I just wanted to say that it would be nice to have some better time zone support, so I'm voting for that as well (good point Chris). And ideally this would not be limited to web dynpro. I'm sure some smart person should be able to come up with something nice...
    Cheers, harald

  • Time conversion ZVAR_UNIT with FLTP InfoObject gives an error

    Hello,
    Situation:
    ZVGW03X is "a copy" of AFVV.VGW03 but with FLTP instead of QUAN data type:
    It has to be FLTP, because we do some divisions and multiplications with the InfoObject. When doing the same calculations with Data Type QUAN we get results that are slightly wrong (because of omitted data for QUAN values (QUAN saves only 2 or 3 digits behind the comma, FLTP has many moe digits behind the comma)).
    So, we have the FLTP values in the cube and we can use them in the report and also the UoM (MIN or H) is displayed correctly in the report.
    The problem: Unit Conversion
    tcode RSUOM -> we created the Quantity Conversion Type Z_MIN_H.
    This works very well for all Time Key Figures that are QUAN.
    But when I use it for the FLTP InfoObjects the report does not even get to the Variable Page:
    Any idea why the TIME conversion does not work with FLTP and how I can fix that?
    br
    Alex

    Hi Alexander,
    The link below might help you:
    CONVERSION OF FLOAT TO DATE IN BI
    Regards,
    Ashvin

  • Unwanted automatic time change for no reason

    I've got a 6021 that changes time by one or two hours for no apparent reason whether it's in automatic time adjust or not.
    The firmware version is 4.10 092005; has it been improved since then?
    CK

    Yes, current version is 04.90. A firmware upgrade should sort out the problem for you
    Best Regards
    Dave

  • After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

    After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
    Already reinstalled 3 times and always says the same message.
    thank you

    Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

  • HT201250 My time machine is not backing up automatically to my time capsule since my upgrade to Moutain Lion.

    Since  I upgraded my iMac,my time machine is not backing up automatically to my time capsule since my upgrade to Moutain Lion.

    I have a similar problem.  On my iMac, I swapped out (at Genius Bar) my HD via Seagate replacement program.  Ever since my time machine won't backup.  I get a error msg that says:
    Time Machine couldn't complete the backup to "[my time machine name]"
    The backup disk is not available.
    Any suggestions.
    Thanks

  • Subject:-Tax reduction in invoice is not possible at the time of LIV when c

    Dear SAP expert
    Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
    While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
    Is there any solution available?
    s ap

    Hi,
    In response to your requirement:
    let me clear my business scenario...
    total price of po is usd100 and sales tax is 20%.
    system calculate sales tax separate the reason being the codition type for sales tax is statistical.
    is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
    Regards,
    Ali
    This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
    Also donot make it statistical as you want to include it in the net price calculation.
    Thanks,
    Atal

  • Conversion of dimensionless units is not possible

    Dear All,
    i have maintain WM configuration. but while creating and saving a MIGO document w.r.t PO errors shows "Conversion of dimensionless units is not possible".
    Waiting for favourable response
    regards
    Mahesh Dasari

    "what units do you use in the goods receipt, in the purchase order, in the price conditions of the PO.
    Have you checked CUNI if there is a conversion maintained for your unit pc ?"
    Unit used in GR and PO is PC and in CUNI no conversion is maintained for this Unit.
    Edited by: mahesh dasari on Jan 29, 2010 1:00 PM

  • Pricing at time of goods receipt not possible for this item

    We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
    The error message is clear and reads:
    Pricing at time of goods receipt not possible for this item
    Message no. 06634
    Diagnosis
    For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
    System Response
    Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
    The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day.  The problem without this is that the new pricing will not be reflected in the GR.
    What is the solution to overcome this issue?
    NOTE:  the Info Record conditions are not being read during GR as the PO references a contract.

    For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract. 
    I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
    The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

  • I really need to go back to the save I made a day ago, my time machine is not set up and files haven't been automatically uploading to cc is there anyway I can go back a day in saves?

    Hi, I just had an issue with a photoshop document, my mac book temporarily crashed the screen glitches and deleted some vital layers I had constructed (took half a day) I thought I could correct it and saved it a few times in a panic and now i really need to go back to the save I made a day ago, my time machine is not set up and I just realised my files haven't been automatically uploading to cc is there anyway I can go back a day in saves?

    Trevor.Dennis wrote:
    So you don't have anything like Shadow Protect running in the background?
    Video editing software only needs to save the steps taken to achieve the edit, and references the actual video files from the hard drive.  So the saved files are only tiny, and it takes very little drive space to auto save to incrementing file names.  Obviously, Photoshop files can be huge by comparison, so the only way to save with a different file name is to do it manually.
    I think most regular posters to this forum make a point of updating the file name of a large project every hour or so, and as a direct response to reading so many horror stories like your own.  The worst story I remember was from a poster whose computer had crashed half way through saving a large PSD file.  After several response, questions and answers, it turned out he was using a laptop with a failing battery.  He told us that he could see the battery was getting low, but left it and left it before finally hitting Ctrl s and running off to find the laptop's power lead. When he got back the laptop had run out of power and shut down, and his PSD file was lost forever.  He may have been a prime candidate to a computing Darwin Award, but his stupidity still did the rest of us a service so we could learn from his mistake.
    Ouch. 
    My digital audio workstation works on the same principle; it creates a backup save just in case things go wrong (which--knock on wood--hasn't happened to me) and only references audio/MIDI files that are related to the project.
    My advice is to always, always back up sensitive documents. There are lots of ways of doing this, from manually to automatically. (e.g., A lot of higher-end routers let you connect external storage via USB so you can run backup software that detects any changes to a monitored folder over a network and then backs up any changed/updated documents to the connected storage. I prefer to do it myself manually, though.)

Maybe you are looking for