Automatic Time

Until recently, my iphone which was operating with os4 was set with date and time being set to automatic and all was fine. However, I recently updated the firmware to os 4.1 and the time and date are completely incorrect.
At the time of this posting the actual date and time is 23/9/10 12:40, however, my phone tells me its 23/9/10 05:06.
I've checked the international settings and it's set correctly to London, I've tried hard re-booting and it's still incorrect.
Carrier: O2
Can anyone assist please?
Many thanks in advance.

Hi,
I actually got mine working only yesterday,
I connected to iTunes, and backed up my iPhone, Then followed some instructions from this site
http://www.dkszone.net/downgrade-ios-4-2-1-4-1-iphone-43gs3g-ipod-touch-ipad
Please note these instructions were to downgrade to a previous iOS, but I downloaded the current iOS 4.2.1,
I just followed the parts about putting iPhone into DFU mode, and installing iOS by pressing the shift key and restore, as for some reason I was constantly getting errors trying to restore through iTunes, this was the only way I could get iOS 4.2.1 onto my iPhone,
Now everything works the way it should, this version has no bugs, auto time works, songs and vids are back in iPod, no sticky keyboard in messages or emails, also battery life seems better too,
Hope this helps
Cheers

Similar Messages

Automatic Time Confirmation for an operation in a Maintenance Order (IW41)

Hello,
We have a requirement to do automatic time confirmation (while saving the order) on an operation when the user selects "DONE" standard text key on Operation line item. Is there a user exit or BADI available in Plant Maintenance that can be used for Automatic time confirmation?
I went through some of the user exist/BADI in PM and didn't find anything for automatic time confirmation. The only thing that I found useful was user exit CONFPM03 (which allows to carry our own checks once and operation is selected for confirmation).
Appreciate your responses. Thanks

Hi ,
Normally thru confirmation we enter actual hrs worked in IW41 .. but if you do not want to run that tcode then not sure of any BADI but i would suggest you to create a Z Programme which runs as a batch job at some 30min everyday . The Z Programme checks all the PM orders of particular order type which are with released status and then gets into operations and checks for standard text and if its value is DONE then calls programme SAPLCORU - IW41 Programme .. you can suitably put a variant for that batch job .. plz check the option with ABAPer ..
regrds
pushpa

Automatic time conversion is not possible

Hi Friends,
I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
Thanks
Narasimha

Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
Map your fiscper field from source to fiscal year--Rule type Routine.
RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
For Posting period
Map your fiscper field from source to fiscper3 year--Rule type Routine.
RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
This will give you the required output.
Regards,
AL

Automatic time zone conversion in web dynpro

We have a WDA running on top of a SAP system that is running on US time. The data from the WDA must be stored in SAP using US time. The WDA will however run in England and needs to display English time to the users. Is there any mechanism or concept in web dynpro that provides automatic time conversion when reading from and displaying time and when writing data back to the database? Some kind of screen exit or other?
I am not asking how to convert the value of a single field from one time zone to another, I am hoping for some general solution to the problem of time zones in web dynpro.
Thanks!

I don't really have anything useful to say, but couldn't help to add my two cents here...
Whenever you work in a system that supports users or other parties spread among different time zones you start wishing for some better time zone support. It's not just the user's time zone that is relevant, just imagine for example a service call to a call center in India, where probably the customer's time zone is even more important than the user time zone.
I know that in principle we have some design issue here, because standalone dates (without any time details) are impossible to convert among different time zones. It would be nice though if the system would provide a framework where any date/time fields can be registered and linked to some time zone field. Changing the time zone field, would automatically update all registered date/time fields.
Ideally the field for choosing time zones would have the ability to show a list of preferred time zones with (changeable) explanations. One could for example imagine that by default it's populated with the two entries for user time zone and system time zone. Each application should be able to register additional time zones, e.g. sold-to time zone for an order, etc.
Another (workaround) option I used in applications (for automatically filled read-only fields, like creation date/time) is to settle on one reasonable default time zone (e.g. user) and then have tool tips showing dates/times in other relevant time zones.
Anyhow, lots of half-baked gibberish, essentially I just wanted to say that it would be nice to have some better time zone support, so I'm voting for that as well (good point Chris). And ideally this would not be limited to web dynpro. I'm sure some smart person should be able to come up with something nice...
Cheers, harald

Automatic time option is missing

Im missing the "automatic time" option on my L920. Is there any way to enable it? Will gdr2 fix this problem? Why such a basic function is missing? Pls advice, help....

toshibasz wrote:
I think its unbranded (under mobile operator it says 000-DE). Here its the same prob: http://discussions.nokia.com/t5/Nokia-Lumia/Automatic-date-time-for-Lumia-920/td-p/1630196
My man problem is when i travel i have to set time mannualy. With Android i thnk the time is set automaticly by the google servers not by operator (not sure about this). Anyhow as i said, it is perfectly working on HTC 8X.
What does it say under Settings > About the under phone information > Carrier. Mine says CV_GB which means it is an unbranded GB country variant. If yours is unbranded it will say something similar except it will have your countries two letter code. However, if it is a network handset it will tell you what network the phone was meant for, even if it's been unlocked afterwards.

How to create automatic timer process in BPM?

Can anyone tell me how to create an automatic timer process in BPM?
Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event?
Thank you

Hi,
You can make use of Global Automatic activity to kick off your process at a particular time. Place a Global Automatic activity in your process and right click on the Global Automatic activity and select Properties --> General --> Global Automatic Type: Automatic Schedule, Automatic Schedule: <Configure with your requirement>.
Else you can make use of due transition/timer activity to get your task done.
Bibhu

Automatic Time Card Generation not generating Time Card

Hi,
I am running the program 'Automatic Time Card Generation'. The log file showing the message
'The process did not generate any timecards for the Payroll, Payroll Period selected'.
And there is no time card for the given Payroll month.
Any suggestion for this.
Many many thanks in advance.
Regards,
Subrat

Please check metalink note 282547.1 to see it is relevant to your issue

Eror in automatic time & date setting

Suddenly the automatic time & date function in System Preferences is returning an incorrect time. I am shown in the correct time zone (EDT), but using the automatic setting puts the time ahead by 4 hours. I believe that would be GMT. Cannot figure out why it would do this. I am using an early-2008 MacBook Pro running Mac OS 10.8.2.
Intrerestingly, my iPhone 4S running iOS 6 is showing the correct time.
Anyone else experiencing this, or have any ideas how do return to the correct time?

see if this link helps http://www.apple.com/support/ical/

When I try to set the automatic time zone on my iPad in Settings all I get is the "waiting" wheel constantly turning. The only way to set the time is in the manual mode. Does anyone else have this problem? Thanks!

When I try to set the automatic time zone on my iPad wi-fi mini in Settings all I get is the "waiting" wheel constantly turning.
The only way to set the time is in the manual mode.
How to solve this problem?
Thanks!

You must be connected to a good wifi network for it to reach an outside time server.

Automatic time zone stuck with the previous location

Hi everybody,
I wanted to use automatic time zone option but it doesn't work at all. When I ask to search for my location, it shows my previous location not current. I restart my Wi-Fi modem, restore the default settings, delate "com.apple.timezone.auto.plist" nothing helps.
Thanks in advance for any hints!

The Mac may be trying to find its location by looking in a database of WiFi locations. If you brought your WiFi router from your old location, it may still be located in your original location in the data base. If they are using Skyhook you can update it yourself.
<http://skyhookwireless.com/howitworks/submit_ap.php>
Otherwise you will just have to not use the automatic setting until your WiFi router gets detected and its location updated.

Automatic time zone detection

Hello, I'm having a problem detecting automatic time zone on a macbook air. If i set location detection on automatic it detects it in Moskow- Russia and it's about 900 kilometers from my current location (Toila-Estonia). It's i big problem, because new feature on iCloud that can show current location of mac shows my posision in Moskow. Any suggestions why it's so ?
Sorry for my bad English.
Aleksandr

This is happening to both my spouse (TURBO 32GB) and I (TURBO 64GB). The first time she noticed was three days ago. Her phone was correct at home (Pacific time zone), but when she got to Seatac airport, her phone was in Alaska time zone. Yesterday, I went downtown and my phone's time went back an hour and the time zone was set to Alaska. At home, it is correctly set to Pacific with correct time. It is correct right now, but her's is wrong right now (she's downtown). Seems like something wrong in the information the phone is receiving off the network, but could it be the phones? This wasn't happening a week ago. Thanks for any thoughts.

Automatic time zone wrong post 2/21/14 security update

Updated ipad air and iphone 5s with new security update today. For some reason, automatic time zone is now indicating I am in Chicago(central time) even though I am in Cincinnati, OH (eastern time). Anybody else having this problem?

Hi all,
i came also across this problem. If you use APEX automatic time zone detection you only get a time zone like '+01:00'. This is insufficient to handle Daylight Savings for TIMESTMAP WITH (LOCAL) TIME ZONE in the past or in the future that differ to the current Daylight Savings.
Try the following:
If you set your time zone to something like 'Europe/Berlin' then Oracle correctly stores/converts the data. To get this more exact timezone information, use jsTimezoneDetect (https://bitbucket.org/pellepim/jstimezonedetect/downloads) on the login page and store the result in a (hidden) item. In the page processing after the login handling, set the time zone.

Automatic time zone error

Out of the blue automatic time zone shows that I reside in Seoul-Korea when I'm actually in Jakarta-Indonesia. It messes up the date and time as a result. It works just fine before yesterday.
Anybody knows what happen?
The solution is quite I easy, I just turn the automatic time zone off and set my location manually.
Thanks, logamberat.

This is happening to both my spouse (TURBO 32GB) and I (TURBO 64GB). The first time she noticed was three days ago. Her phone was correct at home (Pacific time zone), but when she got to Seatac airport, her phone was in Alaska time zone. Yesterday, I went downtown and my phone's time went back an hour and the time zone was set to Alaska. At home, it is correctly set to Pacific with correct time. It is correct right now, but her's is wrong right now (she's downtown). Seems like something wrong in the information the phone is receiving off the network, but could it be the phones? This wasn't happening a week ago. Thanks for any thoughts.

Automatic time faulty after update to iOS 4.2

Automatic time worked fine under iOS 4.1 at home and during travel between different time zones (in Europ). Even taking into account correctly winter and summer time.
Now after the update to iOS 4.2 the time shows one hour later.
Only after switching off the automatic time feature the time is correct.
Don’t think this is meant to work like this as it used to be ok.
Do others experience the same ?
Hope soon to see an additional update to correct this.
T.

snakes527 did you notice that the post is about 3 1/2 years old? The poster already said that he got it working. Also, most posters never mark their post as solved.
Further, there was no FindMyiPod in iOS 4.2.11
snakes527 wrote:
THE PASSCODE IS WHATEVER PASSWORD YOU MADE FOR THE 'FIND MY IPHONE/IPAD'

[SOLVED] Gnome's automatic time zone setting never triggers

Whenever I travel across timezones, I need to open Date & Time Settings and turn Automatic Time Zone off and then on again. When I do that, the timezone updates correctly. Is there maybe a super-long refresh interval on that feature by default? Or some optional package I need to install to actually enable it? Thanks for any suggestions.
Last edited by oconnor663 (2015-02-02 20:18:43)

Oh good call, that was off. I'll assume that was the issue. (I guess turning on Automatic Time Zone does one location check irrespective of the setting?)

Unwanted automatic time change for no reason

I've got a 6021 that changes time by one or two hours for no apparent reason whether it's in automatic time adjust or not.
The firmware version is 4.10 092005; has it been improved since then?
CK

Yes, current version is 04.90. A firmware upgrade should sort out the problem for you
Best Regards
Dave

Automatic Time

Similar Messages

Maybe you are looking for