Automatic transport from test system to QAS

Hello,
It has been discused here already, but I have to place this question again. Is it possible to schedule a background job every 10 min for the import to QAS to speed up the process instead of doing this every time in the schedule manager?
Nevertheless there is only an option to schedule daily, but I want it every 10 min!
Thank you very much for any help.
Petr

Hi,
Did you succeed scheduling the backround job for importing your requests from project. I guess, it would not be possible, the reason is, the variant for this job is generated by schedule manager. Moreover, SAP doesn't recommend scheduling a backround job for this import. The reason is to take utmost care of what you import into your production system.
Hope this helps.
Feel free to revert back.
-=-Ragu

Similar Messages

  • Probelms while replicating Data Source and transport into test system

    I find  the following error messages whilre transporting into test system.
    DataSource 0EC_PCA_1 does not exist in source system of version A.
    Mapping between data source 0EC_PCA_1 and source system  is inconsistent.
    DataSource 0EC_PCA_1 does not exist in source system  of version A.
    Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
    any ideas please..........
    Enhanced the Extract structure and activated the data source in Source system
    Replicate the Data source in BI  and install the Infosource through BI Content  activated and transport them to Test system.

    Hi,
    1.First transport the data source from R/3 dev to R/3 quality
    2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you  data source may not appear)
    3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
      activate these info objects and collect in another request
    4.transport these info objects from BI dev to  BI quality
    5.transport entire data source to bw quality.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

  • Exit Fm is not to CMOD project but transported to test system

    Hi.
    I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
    I made my necessary changes in the include program and  transported to test system, without creating any CMOD project.
    But my changes are working fine in test test.
    Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
    Does it create any problem.

    This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
    First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
    If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
    If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
    No this should not cause any problem and I can tell from experience having done same thing before.
    Best regards,
    Vishnu Tallapragada

  • Process Chain Triggered automatically when transported to test system

    Hi All,
    We modified several process chain and transported the process chain to Test system.
    Few Process chain triggered automatically as the varient was set to immediate in development system.
    Now we want to move the process chain to production. Do we need
    1. new transport request with the variant to future date and discard the transport request which created issues
    2. New transport request with the variant to future date and transport the new along with the old transport to production system
    3. Change the start date in Test system and transport the same request to production
    Kindly advice me on the action to be taken.

    >
    > Hi All,
    >
    > We modified several process chain and transported the process chain to Test system.
    > Few Process chain triggered automatically as the varient was set to immediate in development system.
    > Now we want to move the process chain to production. Do we need
    >
    > 1. new transport request with the variant to future date and discard the transport request which created issues
    > 2. New transport request with the variant to future date and transport the new along with the old transport to production system
    > 3. Change the start date in Test system and transport the same request to production
    >
    > Kindly advice me on the action to be taken.
    Regarding 2: When the old transport is imported into production the start will be set to immediately and the process chain will execute. You should not use this option.
    Regarding 3: Changing in Test system will not affect the content of the transport, it will still be the same as released from Dev.
    We have avoided this annoying problem with process chains being executed when transports are imported by creating a "parent" process chain that simply triggers the process chain in question. This "parent" chain should not be transported. You then set the start option for the original process chain to "start by API/Event" then you can transport the original process chain whenever you want without any risk of the process chain being executed.
    Regards,
    Lars

  • Transport query from test system

    Hi
    We want to create our BEx queries in our test system and thereby transport them to the production system. We don’t want to create the queries in the development system because we don’t have any data there.
    Scenario: create a query in the test system, then use Transport Connection in RSA1 to put the query into a transport.
    When we try to add the query to a transport, we have to put it into another package then $tmp. We are not allowed to do that and we get the message: System setting does not allow changes to be made to object ELEM A5S4UZE…... We have set all the settings in Object Changeability (in Transport Connection) to Everything Changeable. Do we have to open the test system using se06 and scc4 to be able to transport BEx objects from the test system to the production system?
    We use BI 7.0 SP15.
    Kind regards
    Erik

    Erik,
    It's all much easier than that...use xml.
    Go to the transport conection in your test system.
    Note the xml export import icons.
    Select your query under object types.
    Export as xml..it will create a file that you can store in your PC.
    Go to your target system.
    Execute an import of your new xml file. That's all...now you have your query in P..and you can forget about all the STMS and requests, etc..
    Regards,
    Alberto

  • Transport user groups/infosets/queries from test system to productive

    Hello experts,
    i'm trying to transport user groups/infosets/queries but it seems it doesn't work.  For example, i select the infoset, then the transport button.
    I choose EXPORT
    then Transport Infosets
    I type the infoset name
    but i cannot understand if i should change the "IMPORT OPTION-REPLACE".
    Can anyone guide me with this procedure?
    Thank you in Advance
    N.

    Hi Nantia,
    Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported. 
    (System includes these in an automatically created transport request) 
    Step 2. Release this transport and request it be transported to 'new' system. 
    (This results in the entries being populated in transport table AQTDB in 'new' system). 
    Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'. 
    (RSAQR3TR gives the message that stuff has been imported OK). 
    Step 4. In my example I still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'.

  • IMPORTING a transport to TEST system??

    Hi Experts,
    I imported successfully a trsnsport, say 123456 into TEST system.
    Bcoz of some reason, I want to again IMPORT the same transport 123456 into same TEST system.
    So,
    1 - Is it possible? I mean, Is system allows to do so?
    2 - If so, Is prog. wuld be over written? I know there r NO chnages!!
    3 - Is it any danger, to do so?
    I know; i can create a new TR in DEV and import it, but, I dont want to do!!
    thanq

    No - you have to create a new transport (or refresh the test system from a system that does not yet have the transport).
    Rob

  • Transport from one System to another

    Hello,
    I want to transport from one XI-System to another XI-System. I tried to make a import from the SLD but that doesn´t work, why? When i make a file transport and make changes of the transported Software-Component will there be the changes of the original Objekts in the sld?
    Thanks in advance,
    Frank

    Hi all,
    In the case when we have multiple SLD's for Dev/QA/Prod ..There has been a case of manual business system creation in QA for some scenarios. Now I need to move a new scenario into QA and I would like to do an SLD export from Dev to QA..
    1.Will this overwrite the existing business systems in QA?I have re-created the QA business sytems  in DEV with a QA target..
    2. I am taking a Backup of QA SLD before doing this.
    Any advise..
    -Teresa

  • Error when creating transport from Satalite system

    Hi all i am getting the following error when i try and create a transport from a satalite system.
    The RFC connection to the Solution Manager system is not maintained
    Message no. STMWFLOW010
    Diagnosis
    No RFC connection to the central lock information management system.
    The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
    System Response
    Action cancelled.
    Procedure
    Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
    I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
    Points will be awarded
    Thanks
    Santosh

    Hi.
    Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
    Hope it helps.
    /cheers

  • Local class invisible after transport to test system

    Hello,
    i face the following strange problem:
    I have a local class within another class, and in the development system, i can access this local class via its entry in the object tree in object navigator. My class has a subnode "Local Classes" there, which also has a subnode for my specific local class.
    I transported the coding to the test system and it works well there too, but for some reason i cannot see my local class in the se80. The class is apparently transported, the programm works, and if i execute my programm in debugging mode, i can even go through the code lines of the local class, but i can't find it in the se80.
    Does anyone know why this happens?

    Tobias Falke wrote:
    > But why do i have to do this manually?
    Good question. Next question?

  • CHARM: Double logon popup in transport to test system

    Hi Colleagues,
    In Charm, when transporting OTs to test system, we have two  logon popup screens where we have to insert our user and password. Why do we have to repeat logon? Is there possible to register user and password only once?
    Best regards,
    Sandra Gaete

    Hello,
    You may want to review this document as a start.
    [This FAQ was deleted: visit SAP Single Sign-On for help]
    Regards,
    Paul

  • STMS ,  logs? for transports from DEV 200 to QAS 200, 201 & 202

    We are transport from DEV client 200 to QAS client 200, 201 and 202 using stms and specifying which client we want the transport to go to.
    After the transports, how can the development team find the logs for these transports.
    Right now, we as basis can see the results after each of the transports to each client.  IF there is an error then we stop and ask the dev. team to review the logs.  However IF the transports go thru without error, HOW can we go back over time to confirm that there were in fact NO errors for transport to each client?
    Thanks
    Maria

    Hello Maria
    After you import the transport,in the STMS menu only you can see the option for checking import logs
    just click on that and you will be able to see the import logs of a transport.If you drill the logs,you can see everything what the transports has done,what objects have been moved,also if there are any warnings or errors
    Rohit

  • Transports from Dev System to Quality System, Objects copied in Local reque

    Hi All,
    I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have  a single work bench request i.e 9yyyyyy for transport , with  all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
    Please provide the solution for the situation
    Thanks in advance
    suitable answers will be awarded
    Prasad

    Hi,
    1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
    or,
    The objects are not assigned to correct development class/package.
    2. When we try to create a workbench request, we will see only the request and that is fine.
    3.Now, release the local request containing your objects.
    4.Include the local transport objects to the new workbench request (Ctrl + F11).
    and  release and transport the workbench request.
    Pls assaign the points if it is useful.
    Regards,
    Raghavendra Rao.Kolli.

  • Issue whilel transporting from production system to quality system

    Hi All,
        I am facing issue in process chain when I transport it from production system to quality system. Process chain is related to deleting PSA logs. When transported to quality system object_type and object_name fields in display variant becomes blank. In production system it is showing 8ZXXX_CA, it should become 8ZXXX_HA in quality system.
       Thanks for your help.
    Regards,
    Shankar

    Hi,
        sorry it was frm dev system to quality system, not prod to quality.
    Regards,
    Shankar

  • Transport changes from test system to productive system

    Dear Gurus,
    My existing setup is a 3 system landscape DEV->TST->PRD and DEV is the domain controller.
    We develop on DEV system and transport this developments to the TST system.
    Now we want to change the developed objects in the TST system and transport this changes to the PRD system. Is this generally possible? Is this an konfiguration issue?
    Regards,
    Vincenzo

    Hi,
    Why do you want to change this since you have three system landscape? This is the standard practice which you are currently using. Technically you can transport the objects from your TST to PRD by configuring the transport routes etc.
    My recommendation is to keep as it is.
    Hope this helps.
    Manoj

Maybe you are looking for