Automatic Transport Requests and Support Pack Stacks using CHaRM

Hi Experts,
Could you please give your valueable inputs on below Requriements :
1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
would be helpful if any one could send the documentation on above requirements.
Regards,
Vijaysateesh

Hi,
>
> 1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
Yes. You can schedule a periodic job (say for example daily 6M) to import all released transport requests from  QAS to PRD of a maintenance cycle/project. This is the task "Import Transport Request(Backround)" given in task list (tcode-SCMA) of a maintenance cycle.
> 
> 2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
I haven't done this. But this is the  task "Import Support Package" given in task list (tcode-SCMA) of a maintenance cycle.
I hope there is no specific documents for these. It's the same documents related to ChaRM.
Regards
Sanjai

Similar Messages

  • Basic Configuration and Support Pack Stacks

    Hi everyone,
    Just a general question about the Solution Manager 7 "basic configuration" stuff.
    Are you required to perform the "Basic Configuration" everytime after you apply a new support pack stack to solution manager?
    Or is it a one off, after the initial installation?
    Cheers
    Shaun

    Hello,
    https://websmp109.sap-ag.de/~sapidb/011000358700001927282008E has some information about your question.
    Only some parts of SOLMAN_SETUP must be run everytime, other parts are optional. For an overview please visit the link.
    Best regards,
    Miguel Ariñ

  • Transport failure in QAS system after support pack stack 9 upgrade

    We have a DEV->QAS>PRD ECC system landscape. Recently we upgraded our DEV, QAS and PRD system to support pack stack 9 (with Kernel level 137). After the upgrade, we got transport failure in QAS where it shows pink colored down arrow which shows unable to open import queue when I click on it under stms import overview. If I put back the old kernel (Level 69), transport works just fine. DEV is the TP domain controller. When I run the RTPTEST in QAS, it show sthe follwing info:
    RFC Destination
    Destination CALLTP_WindowsNT
    tp Path E:\usr\sap\QAS\DVEBMGS02\exe\tp.EXE
    tp Executable Size: 10.352.432 bytes
    RFC Ping Error when opening an RFC connection
    tp Call
    RFC Link Error when opening an RFC connection
    tp Version
    DB Connect
    Offline Call Error when opening an RFC connection
    I will greately appreciate any input to resolve this issue.
    Thanks

    You need to upgrade two component of your kernel  tp and R3trans
    Also perform an additonal test with new kernel
    cd /usr/sap/trans/bin
    tp connect <SID> pf=TP_DOMAIN_<SID_DC>.PFL
    If you have issue to connect it means there is some issue with tp tool and/or connectivity
    Cheers !
    Manish

  • Setup SM 4.0 to allow me to approve support packs/stacks for download

    I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download.  I havn't had much luck finding a good one.

    Have you configured Maintenance Optimizer , if not use the following link to see the documentation  for configuring MOPZ
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
    From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b>  will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
    Thanks
    Prince Jose

  • Support Pack Stack

    hi,
    can any body please tell
    what is support pack stack?
    is it contains patchs for ABAP and JAVA stacks or only for JAVA?
    can we patch for java individual component?
       i know how to apply through JSPM.
    thanks inadvance,
    regards,
    raju.

    Raju,
    The SP Stacks are sets of Support Packages and patches for the respective product version that must be used in the given combination.
    They are for ABAP and Java.
    In general, when applying support packages, you always have to apply the complete Support Package Stack.
    Patches to a specific Support Package can be installed individually.
    For example, if you are on SP Stack 12 and need Support Package 14 for a certain component, you have to apply the complete Support Package Stack 14.
    If you just need a patch for Support Package 12 of a certain component, you can just apply the patch, as long as it is Support Package 12.
    More details here https://service.sap.com/sp-stacks
    Thanks,
    Dieter

  • Difference between service pack and support pack

    Hi,
    what is the exact difference between service pack and support pack. Are they same?
    The version details presnt in integration builder -> help-> inforamtion  of my XI server are as follows :
    Service pack: 09
    Release: 645_VAL_REL
    does it mean that the both support package and service package for my XI server are 09?
    thanks in adavance
    regards
    Jagruthi

    1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
    http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
    Service packs in 2004 and 2004s;
    in 2004 - in 2004s
    SP12 & < - SP04 http://XI 3.0
    SP13 + 14 - SP05 http://PI 7.0
    SP15 - SP06
    SP16 - SP07
    SP17 - SP08
    SP18 - SP09 and so on...
    2) Support pack -
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
    For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
    You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
    A description of how to apply support packages is available in SAP Note 879289.

  • Errors in Runtime workbench after support pack stack 12

    We have installed support pack stack 12 and now the runtime workbench - component monitoring is not working.  I get a page of errors.  here are some of the errors
    Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:250: cannot resolve symbol symbol : method getTestModel () location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel CompTestModel testModel = cmMainModel.getTestModel(); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:283: cannot resolve symbol symbol : method getTextFromCore (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_tray_0.setTitle( cmMainModel.getTextFromCore("component_monitoring") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:391: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_0.setValue( cmMainModel.getText("all_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:415: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_1.setValue( cmMainModel.getText("red_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:439: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_2.setValue( cmMainModel.getText("redYellow_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:486: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_0.setText( cmMainModel.getText("go_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:647: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_1.setText( cmMainModel.getText("tree_view_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:662: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel String label = cmMainModel.getText("switchToTableView"); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:703: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_2.setText( cmMainModel.getText("ccms_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:808: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_group_1.setTitle( cmMainModel.getText("searchResults_group") );
    I have done the java support pack again to make sure it was installed properly.
    Thanks,
    Dede Logan

    Well after the SAP XI server was restarted and I tried to go back into the runtime workbench and then into the Component Monitoring I am getting another error.
    Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:74: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:79: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ 2 errors .
    does anyone know how to correct this error or what the cause of the error.
    dede

  • What is the best way to apply Support Pack Stacks among satellite systems

    Hi,
    We have differenst systems liek R3, SCM,CRM,XI, BW  and EP. We would like to apply teh support pack stack 12.
    Which land sacpe need to be applied with the stack first?
    R3 or other satellite systems? Is there any recommendation available from SAP on this?
    Thanks in advance
    Jnaneswar.P

    Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
    So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
    You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
    I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

  • IXOS workflow template 4.7 support pack stack 24 problem

    We are upgrading to the above support pack.  Using a customized workflow template created by IXOS we have uncovered a problem.  When an entry is put into the sap inbox we have option of REJECT EXECUTION after which a menu is displayed with other actions.
    The REJECT EXECUTION no longer works.  In debugging the workflow we get to  RH_TASK_ATTRIBUTES_RUNTIME but not to RH_GET_TASK_START_EVENTS.
    Any ideas?
    Thanks
    Jean Wright

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • How could we delete transport request and task(the released one)

    Hello
    We have a released transport task(not request). Transport request is not released.
    How could we delete transport request and task(the released one). Namely we would not like to transport it to production

    Hi, never delete directly in table.
    There are more tables which depends each other...
    Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
    Using program: RDDIT076 and changing status.

  • Regarding Transport Request and related program names

    Hi All,
    I have a issue with picking Pro<b>gram Names</b> from <b>Transport Request</b> names.
    I am using <b>E071</b> table to pick up all the <b>Objects/Program Names</b> based on <b>TR's</b>.
    But for the <b>TR's</b> which are having <b>D-Modifiable status</b> i am not getting any entries from <b>E071</b> table.
    Can anybody give me alternate table which will give us All Program names under a T<b>R</b> based on T<b>R</b> for which status is <b>D</b>.
    Thanks in advance.
    Thanks,
    Deep.

    Hi Deep,
    When the transport request is not released (i.e it is in Modifiable status) all the objects are linked to the tasks under the transport request. So if you are trying to get all the objects in the transport request(in modifiable status), first you have to get all the tasks under the transport request and get the objects under each task from E071 table.
    You can get the taskes under the transport request by selecting from E070 table
    select * from E070 where STRKORR = <your transport request numer>
    then you can get all the objects for each task .
    - Kalyan

  • Transport Request and Cross-Application techniques

    Respected Members,
    I want to know what is the difference between the transporting request and Cross-Application Technique( eg  ALE)
    Generally suppose you have made some object in development server and then a transport request will be created and through transporting to the production server same data can be transported to production server.
    Same thing we do with ALE also that we can transport the data from one server to another server or from one client to another client.
    THen what will be the difference between the transport objects and Cross-Application techniques.
    Clear this picture by giving your valuable answers.
    Thanks a Lot.
    Manish

    Hi Manish,
    The applications transferred through Transport Requests and the data passed through ALE or EDI are completely different technologies.
    The Transport requests transfer the programs and the configurations that you do within the development Server or rather the SAP system to the Production Server and then you execute them to get the desired result.
    On the other hand,ALE(Application Linking and Enabling) or EDI(Electronic Data Transfer) transfers the data or rather business documents(for example vendor payments or making the payme nt through cheques) from one system to another system,i.e different Landscapes.
    If suppose you want to transfer the data from one SAP system to another SAP system which are in completely different landscapes,then you use ALE and in case you transfer it from one SAP system to another Non-SAP system or vice-versa,you use EDI.
    Moreover,you cannot view the coding or the configuration part in case of ALE or EDI whereas you can view the same in terms of Transport requests.
    The landscape means all the clients within one SAP system.
    I hope I have made it In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.clear.

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • Anywhere to find newly added countries in enhancement pack and support pack

    Our HR wants to proactively identify the new countries being introduced through enhancement pack and support pack, so configurations such as V_T503Z (country assignment for employee group/subgroup) can be updated accordingly.
    How can I find such a list?
    Thanks.
    Joan

    Hi Qiong
    If you have ever tried downloading the notes delivered under CLC or HRSP for SAP-HR Component, you would see that the sub-component names are generally based on country abbreviations example PY-AU, PY-SG etc. Also the country names are mentioned there. So if any new country comes up you would know it from the sub-component name. However, whether you need to configure anything in your system for these new countries depends on the fact whether your client has operations in that country or not and whether your project is supporting that country operations for the client or not.
    It is more likely that we keep checking the CLC and HRSP for any new functionalities introduced by SAP for the countries that we are supporting for the client instead of checking for new countries altogether.

  • List of notes part of an EHP1 Support Pack Stack

    Hi, is it possible to get a list of SAP notes included in a specific Support Pack Stack in Solution Manager?

    Hi,
    You can generate a side effect report of the support pack which will give you brief overview of all the changes included in the support pack.
    Thanks
    Sunny

Maybe you are looking for

  • Free of cost delivery

    Scenario: I created a PO and ordered 100 pcs of material A. I receieved 100 pcs of material A and 2 pcs of Material B. Maretial B is free of cost provided by the vendor. How wil  I receieve it in SAP. How will I do MIRO in this case? If its an Import

  • Using native libraries in web application (weblogic on linux)

    I have a problem with loading native libraries for use with my web application. Where do I have to put them in order for the server to see them? The same app on windows runs perfectly fine, because it has no problems finding the dll files.           

  • BPM API's to Update Protected Flexfield on Task

    I have a question regarding Protected Flexfields on Tasks. We are using Proected Flexfields on Tasks that we create in the Worklist. So for example you create a New Human Task and as part of the Task Payload we have the Surname populated into Protect

  • Oracle 8 tns-listener security

    Hi list, premise that an upgrade to a newer Oracle version is recommended... I noticed setting a tns-listener password in Oracle 8.1.7* ("SECURITY=ON"), the SIDs are anyway enumerable (via "Command=status"). According to you, is firewall filtering th

  • I want to run multiple instance of tomcat on same server-very Urgent

    HI all, I want to run multiple instance of tomcat on same server. I have created CATALINA_BASE directory and i put conf,logs,temp,webapps, and work directory. I have configured server.xml in different port. I have set the environment variables too. T