Automatic transport with ChaRM

Hi!
We transport currently all transports with u201EIMPORT ALLu201Cmethod and are thinking about the implementation of ChaRM.
This method (u201CIMPORT ALLu201D) allows us to transport the transports at 10 and 14 ou2019clock automatically from DEV into QAS system
As we know ChaRM works with SINLGE IMPORT method (CTC=1).
Questions
1) Do we have any possibilities for the automatic transport in ChaRM?
If Yes, how does it work?
2) Do we have any possibilities for locking of objects and mechanisms to avoid "outrun of transportsu201D?
Developer 1 works with objects A, B, C, changes the object B and transports them into QAS system.
Developer 2 works with objects B, G, H, transports the object B into QAS system.
Now he has the other version of object B, because the object B was changed by developer A.
Does ChaRM offer some mechanisms to avoid  u201Coutrun of transportsu201D?
Any helpful information will be very appreciated and awarded with points.
Thank you very much!

Hi!
Thank you very much again.
The problem is we would like to use non-ChaRM and ChaRM transports simultaneously in same DEV client (e.g. 100). The same applies for QAS system (e.g. client 200).
We would like to integrate other transport routes into ChaRM.
Do you think we have possibility to integrate this.
Please have a look into our system landscape [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html].
Please help to clarify....
I awarded you point...

Similar Messages

  • ChaRM - transport with error keep repeating for every transport job

    Dear experts,
      We are using ChaRM for our transport. There are always transport will returned with error. And I believe this is a feature provided by ChaRM, that all these transport with error will be retransport again during next run. Is there anyway to stop this? Some is in the list of "Correct Import (Repair Flag)" in task list, but some is not.

    Hello FlyingFox,
    I assume that we consider a urgent correction with different transport requests:
    tr #1 :       retrun code 0
    tr #2 :       retrun code 8
    tr #3 :       return code 0      (but tr #3 didn't resolve the problem of tr #2)
    Starting the import again, transport requests #2 and #3 have to be imported.
    Sequence errors will be possible, if only tr #2  is imported again.
    Therefore:
    mark those transport requests, which shouldn't be imported again via task list ('correct transport requests manually' as you described -  in our little example: mark tr #2).
    Afterwards only new tranport requests will be included (e.g. tr #4).
    Best regards
    Horst
    Edited by: Horst Förster on Oct 25, 2011 11:37 AM

  • Is it possible to transport requests to 2 QA clients with ChaRM?

    Hi
    If there are 2 QA clients and requests need to be tranported to both clients at the same time,
    can SolMan ChaRM handle this?
    Transport route is as follows.  
    DEV_______QA_______PRD
    200___->__300___->_100
    ______--->__500
    Anybody has experience?  
    My version is SolMan 7.0 SP16
    Thank you

    hello,
    I have the same behaviour in my landscape. Only the systems in the main path is available in SDHF task list
    I would say this is normal.
    Why is this normal ?
    Because the ur.gent correction is to be considered like an emergency process that doesn't superseed the normal maintenance but that complement it to have a faster change in place.
    That means the ur.gent transport will follow the normal maintance process anyway
    If you miss the ur.gent transport in the other QA client you may schedule the following task in your project tasklist
    /TMWFLOW/SCMA_BTCH_SYNC_TEST or online
    /TMWFLOW/SCMA_TRIMP_SYNC_TEST
    This is not obvious how this is working and I am currently evaluating this solution in another thread
    [Is it possible to transport requests to 2 QA clients with ChaRM?|Is it possible to transport requests to 2 QA clients with ChaRM?]
    on your side you may also want to evaluate this tasks ?
    br
    Xavier

  • Transports - automatic transports

    Hi Friends,
    For automatic import of transports to QA , i have schedule the below job
    TMS_00000001IMP.ALL ,
    This job is finishing with the below  error
    Transport control program tp ended with error code 0212
    Diagnosis
    An error occurred when executing a tp command.
      Command: IMPORT ALL  pf=/usr/sap/trans/<SID>/bin/TP_DOMAIN
      Return code: 0212
      Error text: could not access file as supposed (see dev_tp or S
      Request: ALL
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary
    I have checked the permissions and corrected the same. But still i am getting the same error. Hence the automatic transports to QA is not working.
    Please some one help me to correct the same.
    Thanks
    anup

    Hi,
    What the SAP system's TP system Log is telling ?
    (STMS->Overview->Imports-->click on Goto -> TP System log)
    Operating System ?
    Regards,
    Bhavik G. Shroff

  • Manage transports (without ChaRM) in Solution Manager?

    Hi,
    How do I manage transports in target systems (ECC, APO, etc.) using Solution Manager. We have the Dev systems (ECC, APO) connected using RFC to Solution Manager. Configuration (SOLAR02) will be done using Solution Manager. So the question is - how do we manage transports (without ChaRM being present) using Solution Manager?
    Any suggestions/recommendations? I would greatly appreciate any feedback.
    Edited by: GiveMeFood on Sep 22, 2011 10:05 PM

    Hi,
    One of the main features available with the Solution Manager is ChaRM. It has been introduced to basically deal with the diverse transports management and related control framework over the SAP lanscape. Having a Solution Manager and not using ChaRM defeats the purpose of installing a Solution Manager in the first place. A better approach would be to incorporate the features provided by the system.
    In my opinion - you should configure ChaRM, else it would not make sense to have the SolMan in the landscape. You would start using one of the features which you already have !
    Regards,
    Srikishan

  • How to set a job to import automatically transport requests

    I wander how to set a job to import automatically transport requests

    Hi jan Bo,
    http://help.sap.com/saphelp_erp2004/helpdata/EN/44/b4a3c57acc11d1899e0000e829fbbd/frameset.htm
    Usung above link you can schedule a transport, if you schedule this job a back ground job will be defined copy this job and create a new varient with your transport request. Make this job run after the back ground job you want.
    Regards,
    S.Manu.

  • Automatic transports scheduling in ECC

    Dear Friends,
    We are planning to automate the transports in our Quality system. We have concern for the following, please can u kindly help us with the same.
    If we automate the transports in SAP, will the old released transports to QA but not transported to QA will they automatically be transported with the new queue. If what is the procedure to avoid the same.
    Also what are the other precautions we need to consider when we schedule the automatic transports.
    Thanks
    ram

    Hi,
    Thanks for your kind reply. The buffer for the QA system is set to /usr/sap/trans/SID/buffer/SID_of_QA(where transport queue is defined)
    So if I move the SID_of_QA from the buffer, automatically all the queue in the transports will disappear.
    Once we schedule the automatic transports then only the new transports released in the queue will be transported. Please correct me if I am wrong.
    Thanks.

  • Deactivating automatic transports?

    Hello experts,
    I am trying to disable the automatic prompt for a transport when going through the hiring process via PA40.  I know you can check a few fields in table T77S0 which works. 
    Somehow our production environment doesn't prompt us with a transport request for the hiring process but also doesnu2019t have these fields checked in the T77S0 table.  We donu2019t want to maintain this table if there is another way to disable the prompt for a transport request.
    Iu2019m sorry if this question is too basic but I havenu2019t been able to solve this query on my own.
    Regards,
    Kevin

    Hi,
    You can disable transports via SCC4 transaction by selecting "No automatic transport ".
    However, this would affect the transport mechanism in the whole system.
    On the other hand, the switches in T77S0 only affects transport requests in Personnel Management module.
    Regards,
    Dilek

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Our experience is a little different, we have different iTunes accounts for different family members, each family member has their own iTunes library on their own mac, each mac uses my Apple ID for homesharing and we are able to play purchased content from each library on the Apple TV.

  • Error when releasing Transports in ChaRM

    Good Day;
    When releasing a transport thru ChaRM I get the following error
    "Release of system could not be determined. The error message is "/TMWFLOW/CRIT_OBJ061"
    Any ideas?
    Thanks
    Don

    Good Day Farzan;
    We have the following systems
    Solution Manager      (Netweaver)
    Development System (Client 100 SAP 4.7)
    Quality System      (Client 100 SAP 4.7)
    Production System      (Client 100 SAP 4.7)      
    Regards
    Don

  • Iphone 5s no longer automatically reconnects with my car bluetooth

    It used to be that when i got into my Subaru the phone would automatically reconnect with my bluetooth.  No longer the case.  What gives?

    Hi mzjody,
    Welcome to the Apple Support Communities!
    I understand that Bluetooth issues with your vehicle can be very frustrating. In this situation I would recommend the troubleshooting steps in the attached article for troubleshooting. 
    If you can’t use a Bluetooth accessory or car kit
    Have a great day,
    Joe

  • Why is my address book no longer being automatically updated with new entries?

    why is my MacBook Pro address book no longer being automatically updated with new entries?
    thanks!
    Joe

    thanks for the question!
    i have an iphone that uses addresses/contacts.  i don't use icloud because i was getting doubled calendar entries.
    updating is done "via itunes on this computer"

  • Windows 8.1 not automatic contact with WSUS

    Hi,
    I have an issue with WSUS 3.2 , the problem is all windows 8.1 based computer are not automatically contact with wsus as daily basis. 
    we need to run manually command on windows 8.1 pcs, then they could contact.
    Thanks
    Arora,Jitender

    If you using a Windows Server 2008 R2 make sure that
    WSUS-KB2734608-x64 is installed!
    If this not solving your problem check also this thread:
    https://social.technet.microsoft.com/Forums/windows/en-US/ed0b0865-ae33-437c-9f64-b5d31f8a0f2f/windows-8-pro-wsus-error-800b0001
    Kind regards,
    Tim
    MCITP, MCTS, MCSA
    http://directoryadmin.blogspot.com
    This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
    "If this thread answered your question, please click on "Mark as Answer"

  • I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.

    I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.
    Why is this?  My husband's 4s is still on IOS7 and it still connects automatically.

    I do not know if this will help.
    For a limited time Apple will allow you to downgrade to 7.1.2.  Hurry do not wait.
    See brownox second post here:
    Are there known problems with hdmi screen display and iOS 8?
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

Maybe you are looking for