Automatic transports scheduling in ECC

Dear Friends,
We are planning to automate the transports in our Quality system. We have concern for the following, please can u kindly help us with the same.
If we automate the transports in SAP, will the old released transports to QA but not transported to QA will they automatically be transported with the new queue. If what is the procedure to avoid the same.
Also what are the other precautions we need to consider when we schedule the automatic transports.
Thanks
ram

Hi,
Thanks for your kind reply. The buffer for the QA system is set to /usr/sap/trans/SID/buffer/SID_of_QA(where transport queue is defined)
So if I move the SID_of_QA from the buffer, automatically all the queue in the transports will disappear.
Once we schedule the automatic transports then only the new transports released in the queue will be transported. Please correct me if I am wrong.
Thanks.

Similar Messages

Scheduled transports (automatic transports) missing transports

Hi
We have scheduled/automatic transports set up, i.e. SAP standard job imports all released transports from DEV into QA on the hour and the half hour. This normally works fine...
However, our developers have noticed a few transports have not been applied to QA. On further investigation it looks as if any transports released EXACTLY on the hour, or half hour, are NOT imported into QA. The job seems to miss these!
Anyone come across this / know how to fix? It's not easy to check if any transports have been missed either, any easy way of doing this would also be beneficial in case we can't fix this, we need to know what has been missed...
We're on tp patch 165 (700), last few fixes documented in latest version (214) don't say anything about this.
Cheers
Ross

Thanks both.
Yoganand, yes we could perhaps use a script instead to schedule transports or write a script to look for missed transports and import them... will look into this, but shouldn't have to - SAP standard functionality should work!
Suman, thanks, but this isn't the case - half an hour / an hour later, still not imported - in fact, they never appear in the buffer on these odd occasions. Developer releases it exactly on the hour/half hour and it looks like a successful release to them. However, it never appears in the buffer/is never imported. It's as if it tries to add to the buffer but because the scheduled transport is taking place, cannot... logs show that it WAS added to the buffer - but checked and nothing there.
Regards
Ross

Transports - automatic transports

Hi Friends,
For automatic import of transports to QA , i have schedule the below job
TMS_00000001IMP.ALL ,
This job is finishing with the below error
Transport control program tp ended with error code 0212
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT ALL pf=/usr/sap/trans/<SID>/bin/TP_DOMAIN
Return code: 0212
Error text: could not access file as supposed (see dev_tp or S
Request: ALL
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary
I have checked the permissions and corrected the same. But still i am getting the same error. Hence the automatic transports to QA is not working.
Please some one help me to correct the same.
Thanks
anup

Hi,
What the SAP system's TP system Log is telling ?
(STMS->Overview->Imports-->click on Goto -> TP System log)
Operating System ?
Regards,
Bhavik G. Shroff

How to set a job to import automatically transport requests

I wander how to set a job to import automatically transport requests

Hi jan Bo,
http://help.sap.com/saphelp_erp2004/helpdata/EN/44/b4a3c57acc11d1899e0000e829fbbd/frameset.htm
Usung above link you can schedule a transport, if you schedule this job a back ground job will be defined copy this job and create a new varient with your transport request. Make this job run after the back ground job you want.
Regards,
S.Manu.

Automatic Transport jobs keeps running

Hi,
I have scheduled an automatic transport job:
TMS_0000000001TMS_TP_IMPORT in BIQ to run every 30 minutes. We want to
be able to transports every 30 minutes in BIQ. For some reason it keeps
running. I tried to Shop it and I am unable to stop it. Every time I
try To stop it, I get the below error message: u201CError Locking table
TBTCOu201D. When I try to delete the job I get the message u201CFailed
To lock job u201CTMS_0000000001TMS_TP_IMPORTu201D. Please advise as i can
no longer do any more transports.

Hi,
Did you try killing the same at OS level. Check at OS level how many tp process are running. If more than one are running then kill all of them at OS level. After that delete the entires from TRBAT and TRJOB tables. Also, please refer the below link if it can help.
http://www.basis2048.com/rsbtcdel2-locks-all-of-table-tbtco-1182.htm
Regards,
Sharath

DELIVERY AND TRANSPORTATION SCHEDULE

HI
How we configured delivery and transportation's schedule in sap please explain configuration steps
Thanks in advance

Hi Reddy,
Delivery Scheduling and Transportation Scheduling
Shipping activities and transportation can be scheduled automatically in sales documents.
Picking/packing and loading, transportation scheduling and transportation can be planned and optimized on the basis of the dates determined.
There are two different types of scheduling:
Delivery scheduling
The SAP System takes into account the pick/pack time and loading time for a transaction.
You define the type of delivery scheduling for each shipping point.
Transportation scheduling
The SAP System takes into account the transit time and the transportation scheduling time for a transaction.
You define the type of transportation scheduling on the basis of the route (see sections "Route definition" and "Route determination").
You define for each sales document type whether delivery scheduling and/or transportation scheduling should be carried out.
For the dates to be determined automatically on the basis of the requested delivery for an order item, you must define both the times and what influences the determination of the date.
You need to carry out the following:
Define for each sales document type whether scheduling is to be carried out and, if so, which type.
Define the indicators for scheduling for each shipping point.
Define:
Pick/pack times
Please fallow below steps:
SPRO > Logistic Execution > Shipping > Basic Shipping Functions > Scheduling > Delivery Scheduling and Transportation Scheduling
STEP 1: Define Scheduling by Sales Document type
Here have to assign your Sales Document type to your Del and Transportation Scheduling if the system what to carry the Scdheduling Automatically.
STEP 2: Define Scheduling by Shipping Point
Here if you want to carry Determine Loading time and Determine Pick/Pack time Just select the "C"- Default for Shipping Point and give respective Hours/Days here.
STEP 3: Maintain Working Hours
Here can maintain shift like ( Morning, Afternoon Shifts etc., with respective Start and Finish time.
STEP 4:
Here we can difine duration for Shipping point,Routes, Pick/Pack time and Loading time.
Hope this solves your Purpose.Please Reward Points if really helpful,
Thanks and Regards,
Sateesh.Kandula

Automatic transport

Hi,
When I log in to a specific client. eg 800 and schedule my "automatic transport all" in stms_import, after the job run, my request was all transported. However, how come the other request in other client eg, 810 was also transported. Isnt that batch job client specific?
Regards
Lauran

Hi
The job is client dependent, but the transport queue is not.
The requests which are imported in client 800, will be seen in 810 also as imported.
Regards
Rahul

Schedule Line Delivery Date Calculation with Transportation Scheduling

Hi All,
We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
Order Scenario:
'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
Our 'Route' has a Transit Time of 2 days
We create a Sales Order on Monday for a Material that is available in our Plant
The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
All help greatly appreciated.
Thanks,
Ravelle<i></i>

Hi Pathik,
Thanks for your reply. I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>.
The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
Thanks,
Ravelle

Automatic delivery schedule for Scheduling Agreement

Hi all...........
I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines.
I created SA and creation profile, when Im trying to generate JIT schedule system showing "Error generating release against scheduling agreement (cause 2)".
Pls let me know wht configuration I hve to do and pls let me know all the steps.
I like to know output determination setting for SA releases also.
regards
Durga Ram

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Stock transport scheduling agreement SD Delivery

Dear Experts.
I am using stock transport scheduling agreement in order to show requirements from one plant to another plant belonging to the same company code.
Delivery to the Stock Sched Agreem will be managed thru the SD delivery processes.
I use VL10I in order to create a delivery linked to the Sch Agrm, nevertheless the business processes requires that sometimes the delivery created is modified adding new materials.
Need.
I have not found any option on the VL02N which would allow add a new material linking it to a specific sched agreement ---(this same option exists for the case that a new material is delivered and has to be added and linked to an existing customer order)
Does anybody know how can I do this from the delivery - VL02N??? I would prefer to avoid using VL10I again - which is actually the way I am getting this solved.
Any help would be appreciated.
Regards vpa
Valentí

Have you configured required settings for Stock transport scheduling agreement in SPRO (STO Settings)
If yes check in SA r u getting shipping tab or not.
Give some more details about your process .

Using a JIT call with stock transport scheduling agreement

Hi,
I have a requirement to send forecast schedules for a stock transport scheduling agreement from procuring plant to producing plant. Production would be done in producing plant against these forecast schedules. Producing plant would only ship against a JIT call (pull trigger) from procuring plant and not against a forecast schedule line. Is there a way in standard SAP to achieve this?
Thanks,
Krishna

I don't think so.
You need to transfer the production forecast as demand plan in the production plant. Have a MTS planning strategy (like 10), then manufacturing is triggered by this demand plan, and goods are stocked in the production plant, waiting for the pull call from the sales plant.
Don't forget to take care of the consumption of demand with STO (I think there's a note on this).

Stock Transport Scheduling Agreement - error message: 'Stock in transit...

Stock Transport Scheduling Agreement - error message: 'Stock in transit exceeded'
Hi, I do have a question about transport scheduling agreements.
I have created a stock transport scheduling agreement via ME37, doc. type LU for a stock material from issuing plant TT01 to receiving plant TH01. The material is maintained in both plants.
After that,I maintain the delivery schedule via ME38 for a quantity for today. The quantity is available at issuing plant TT01, checked via MMBE.
Then, I try to post the goods via MIGO. When I try to post the document, I get the following error message: "PL Stock in transit exceeded by 1,000 T% : 794 TH01 S1". Why do I get that? My target is to decreate the stock quantity in TT01 and to increase the stock quantity in TH01.
Thanks, Peter

Hi,
This happens when you are issuing more on the schudle qty, Check you have anything on the transit receive it the try agin to process the issue.
Hope it helps.
Suresh

Goods Issue Error Message for Stock Transport Scheduling Agreement

Hello,
I have set-up an inter-company stock transport scheduling agreement, delivery is created and stock is picked. Upon PGI of the delivery I receive the following message, has anybody and ideas of the root cause?
Message - E M7 153
Purchase order XXX does not contain items for a stock transfer
Thanks.

Dear,
Please check vendor
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/help-with-config-of-one-step-sto-720045
Regards,
Syed Hussain.

After each Error Message,the follwing messages are in Scheduled in ECC SMQ2

Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
Prashanth

Hello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth

Stock Transport Scheduling Agreement - PO - created but Shipping Conditions

Hello Gurus,
Our client has a process of STSA (stock transport scheduling agreement - instead of PO) where they want to transfer the materials from US to Europe, being Europe customer. Europe creates STSA and requests out of 100 qty first 25 by Air Shipping Conditions and the rest 75 by Ocean Shipping Conditions.
Once we create STSA Shipping conditions we can not change in STSA in Item data ->morefunctions->shipping data. Where as same can be played around in Sales order. So currently no workaround so they are changing the customer master from Air to Ship and creating multiple STSA.
I would like to know whether a good solution is available already and I am not aware of yet. Please let me know.
Mahesh

Hi Mahesh,
We have the same issue - just wondering if you ever found a solution?
Thanks,
Mark

Automatic transports scheduling in ECC

Similar Messages

Maybe you are looking for