Automatic trigger of WBS user status

Hi Guys,
I have scenario here
WBS Element--> User status phase I WIP, Phase I Complete, Phase II Wip....
Network Header Phase I
Activity 1
Activity 2
Activity 3
Activity x--> When confirmed should trigger WBS user status to Phase I complete
Network header Phase II
Similarly.
How do i do this in PS? I need the WBS user status to be triggered Automatically from activity confirmation.
Regards,
Paval.

Hi ,
I think it is possible throuugh Event Linkage Method( SWETYPV transaction), can get help from your ABAPer/workflow guy.
I am just giving hints which may help your ABAPer .
Get Business object for Network BUS2002,
Check for Event of Confirmation if not available , create the event for custom Business object (copy of BUS2002).
Maintain this through SWETYPV transaction,
in Detail level enter Receive function module that should consist of actual logic.
Thanks
Ramesh

Similar Messages

User exit for WBS User status ?

Hi All,
I want to trigger emails from WBS user status settings.
If the WBS user status is 'AA' it should trigger emails to a business unit with a message, if it is set to 'BB' it should trigger e-mail to another business unit with a message.
Which user exit should i use?
Please help.
Thanks,
San

Ramesh,
Thanks again for your response.
The problem with my project is, i am <b>not using any networks</b> at all !
I am using project with only WBS (about 20) for easy cost planning functionality to generate quotation based on DIP profile.
Business team needs communication linked with WBS user status settings.
Your suggestion may work for project which has networks of category 20, but here, i am afraid it wont work.
comments please.
Thanks,
Santosh

WBS User Status issue

Hi All,
I have configured WBS User status with one user status as LFI - Locked for Financial posting.
For this user status following buiness transactions are forbiddesn:
Create billing document --> Forbidden
Create sales document --> Forbidden
I have tested one scenario as :
I have created one sales order on WBS Element not having LFI User status and then I have activated LFI user status for that WBS Element. Now when I try to create billing document for sales order created earlier -- whther system shoul allow me or not?
- Swapnil Kharul

LFI User status has following Business Transaction control as forbidden:
Acct. assignment order/project
Actual activity allocation
Assignment order/WBS
Create billing document
Create sales document
FI: Postings
Funds commitment
Goods Movement
Goods issue delivery
Goods receipt for purch. order
Incoming invoice
Manual cost allocation
Material purchase order
Material purchase requisition
Post goods issue
Schedule order
Hi Srini,
Thanks a lot for your help in this matter.
My test results are - system is allowing to create billing document but FI document not got posted.
Also in my sales order used WBS Element is billing element. I know about substitution rule for determination of higer level billing element.
Please suggest.

WBS user status change doesn't trigger changed by update...

Hi all,
I've inherited a program that is used to programmatically change the system and user status of WBS elements. The user has reported an issue where the Change By and Changed On values displayed on the Admin tab of tcode CJ20N are not updated after the user status for a specific WBS has been programmatically updated. The system status update works fine...both fields on the admin tab are updated. I searched the forum and couldn't find anything that speaks specifically to this problem...does anyone have any thoughts?
Thanks in advance.

Yeah, that makes sense.
I'm thinking now that if I create a new version in the web gallery and crop it just for the web export the app will probably re-send that image out to the web site because it treats the new version as a different image. Since the new version really doesn't take up any meaningful hard drive space this wouldn't be a deal-breaker, but I would have to remember to NOT delete that version or change the crop ratio before uploading the gallery again.

FM STATUS_UPDATE to Change WBS User Status

Greetings,
I need to fine the best way to change the user status for WBS, I found STATUS_UPDATE function module and it can update the status , however, the changes does not get reflected in the Change Document log, any idea ?

Hi,
I would suggest using BAPIs instead of "regular" function modules. With BAPIs you are sure that they won't change, the API is stable. You can't be sure about internal FMs. I know that chance of changing STATUS_CHANGE_EXTERN by SAP is seriously low. You can also use FM incorrectly. Using BAPI incorrectly is almost impossible. What I just want to say is that preferring BAPIs is a really good practice.
Cheers

How to retrieve the User Status on WBS Elements

Hello, could someone please tell me how to retrieve the User Status for WBS Elements using ABAP? Which table stores this information.
Thanks.

if you have the OBJNR there was also another FM status in Se37 [link>>|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/changing-status-620444]
also look in the similar requirement [discussion|http://sap.ittoolbox.com/groups/technical-functional/sap-bw/wbs-user-status-262089]

User status profile settings on WBS not working

Hello,
We have a User status profile on WBS element which has various statuses in it allowing different business transactions when that particular user status is set.
There is one user status NPC in that status profile which should disallow assignment or confirmation on maintenance work order. Now the status previous to NPC status allows assignment or confirmation of orders. So after a order is assigned to the WBS and the WBS user status is changed to NPC when we try to confirm order on this WBS in NPC status sytem allows order confirmation.
Why is system allowing this inspite of the status profile config says confirmation is disallowed in NPC status. I have checked the object types in the status profile config and maintenance order is also included in that but still its not working. Please help in solving this issue, its critical.

The business transactions disallowed under NPC status are as below,
Acct. Assignment order/Project
Actual activity Allocation
Assignment Order/WBS
Confirm Order
Goods Movement
Material Purchase Order
Material Purchase Requisition
Post Goods Issue
But orders can be assigned in the status before NPC, but once NPC is set system does not allow assignment of new orders which is correct. But system allows confirmation of already assigned orders. Please help we do not want any order confimation after NPC is set.

Work flow (User Status)

Dear All
Can any one guide me, can i trigger workflow through user status of project definition or work break down structure
Best regards

Hi,
Yes you can trigger workflow based on userstatus of wbse. check with
your abaper for object types.
Regards,

Budget Control through User status

Dear all,
I am implementing the budget process through user status as follows
step1 User has to do the Cost planning first, So that time system does not allow to do direct budget allocation through cj30 and stop all the process like Release,PR,PO,GRN FI posting.
Step 2 approval of cost planning by HOD from this process only system allow the budget allocation.
step 3 budget approval by GM, So afer the approval of budget system should allow PR process.
Step 4 Budget Release by MD throuch CJ32 and set the user status budget released,After this status system system should allow all the process like Release,PO,GRN,MIRO,FI posting.
I did all the required configration as per requirement for above process in WBS user status, But my problem is that if suppose MD set the user status Budget released without doing the budget release through cj32 then system allowing all the process because my AVAC is not activited.
Please provide me the solution
thanks
abhijeet

you need to check you budget profile your availability control should get checked against Release budget mostly for overall release ( A/c to your scenario ) . So when you does CJ32 and give budget at that time AVAC status will be on WBS and if you giving less budget in CJ32 system will not allow your approver ( MD ) to save transaction.
Ind. 'Overall' Ind. 'Releases' Avail. control against ...
X X Overall budget released
Make setting shown as below in your budget profile with activation type 1 .
With Regards
Nitin P.

How can i set automatic change of user status(for WBS)?

Hi,
Everytime when i create invoice for customer shipment using transaction code VF01, i need to change user status of WBS element manually in project to INTG in order to recognize the revenue. Is there any possiblity to change user status of WBS automatically after invoicing?
If it is, could any one please help me to resolve this problem?

I have Compressor 4 already, defined an own parameter set there (with 1024x680 resolution) but this was not displayed as an option in FCP X. I want to produce my resolution directly from FCP X, not produce it in another resolution and then convert it via Compressor. Let alone the fact that non of the FCP-included resolutions has a width-to-height ratio of 3:2 like mine. The solution would be to know where FCP stores its presets and to be able to modify them or add new presets.

User status to prohibit automatic creation of PR

Hi Gurus,
I have scenario when project needs to be released in the beginning of the project for incoming order analysis of the project. Now if I release the entire project, the PR is generated automatically, on release. I want to restrict this.
For this I have created a user status. and I am trying to prohibit the creation of PR from project. But its not working.
Can anyone please help on this
Thanks

Hi,
I think I should now explain the scenario in detail.
The PR should be generated on REL , Necessary settings have been done. Now there is a need to do incoming order analysis, for this project should be released during the beginning only. Now the problem is that due to early release of project all the PR are created.
But in practical situation this shud not happen, PR is only generated when material is really required.Hence ideally only the desired activites/ WBS should be released as and when required.
Hence, if I change parameter to Never. No PR would be generated unless someone manually change it to Immediately. There are more than 500 materials on the project. So changing manually is not a good Idea.
Hope this will clarify
Thanks

Solution for inheritage of user statuses in a WBS hierarchy

In a SAP 4.6C system I have set-up a specific user status profile for the WBS-hierarchy of a project. The intention is that at the highest WBS-level the user-status is changed manually and that the statuses of the lower WBS-elements will be changed automatically (just like the system statuses). As far as I know
this is not standard SAP and has to be developed
Is there anyone who has dealt with the same problem? How do you have handled this: user-exits, substitution etc.?
I hope somebody can help me.
Regards,
Paul

Dear Hensgens
You might know that as of release 4.70 the functions 'set & pass user status'
and 'revoke & pass user status' are part of the standard.
Please refer to note 486765.
There is the possibility to do a downgrade of this functionality, we are aware that other customers have done so.
Regards
Martina

User status linking between wbs and network

Dear All,
I got one requirement in which i am using user status at wbs level to block all the transactions. Now the problem which i am getting is that even though i am maintaining the user status at wbs level, users are able to post the data on network activities. If i am maintaining the user status at activity level than i am able to stop the same.
Kindly suggest cant we maintain user status at wbs level and stop fi posting at activity level. Is there any way to achieve this.
Regards
Abhishek Sinha

Dear Abhishek,
Use same sataus profile on Neworks also after having included Network activity & Network header as affected object types in OK02
regards,
Sam L.

Project setup, WBS element mgmt, user status, settlement

What is Project setup, WBS element mgmt, user status and settlement

If you are after the definitions, the simplest way would be to go to SAP Help.
If you're after the transaction code, it's CJ20N which is the Project Builder screen.

Automatically updation of User Status

Hi All,
I am facing a problem on automatic updation of user status.As I have a process that on the basis of one field value in a quality notification I want to update the user status automatically.
I explored something with business process but not getting the right way to use it.
Please guide me if anyone deals with the same scenario or know more about using business process with user profile.
Cheers,
Tushar

Hey Prasad,
You will have to Develop a report to do this...
You should use FM CRM_ORDER_MAINTAIN to do this...
Details of how to use this FM for Updating Status could be found in CRM forum..
I would advice to consult your CRM Tech Team who are in best position to do this..
Please Reward for usefulll Post..
Regards,
Anand..

Automatic trigger of WBS user status

Similar Messages

Maybe you are looking for