Automatic UD and Automatic Stock Posting

Step 1 QS51
For Plant 1000, for 04 inspection type, I have created Z04GPF as selected set for taking UD
On double clicking the Selected set codes I wll reach the following screen
As per my requirement, I have maintained the setting for Automatic stock posting to Unrestricted Stock from Quality Inspection.
Step 2 ; QA16
Now My requirement is that I want to take Automatic UD and subsequently Automatics Stock Posting should takes place from quality stock to Unrestricted stock.
On QA16 screen I have inputted the following parameters to select the lots of the same production order and same batch material.as shown below
Sir, I am facing Problem at the area shown below on QA16 screen
Here I want to input the UD selected set maintained for plant 1000 (In specific as Accepted A ). But on selecting F4 at the field shown above I am getting the below popup window
This is the UD for SAP Standard Plant (01 GR WARENEINGANG)
Also I am unable to see 04 inspection type
The same problem is coming when I am selecting F4 on the field UD code
Dear Sir, Please suggest me whether and Where I was wrong
razvee.shaik

hi,
even i am asked to use qa41 for sheduling the job but whenever i schedule job and try qa16 for the ud and posting i recieve an error i.e (No batch input data for screen SAPLIPW1 0200)
do u faced the same error / if u have a solution to batch job, tell me about it. i am having a relavent problem ..
Regards,
Sameer Jalal

Similar Messages

Changing result Recorded after UD and Insp Stock posted.

Hi,
Is it possible to revoke or change the result recorded after UD is given and also stock posted for material.
In inspection plan i have activated the long term inspection check box for that particular MIC for which i want to change the results.
I have done UD reversal, stock reversal etc.
Then
I hv tried through QE02 but its showing:
Short term Inspection Completed.
All Insp.Completed.
UD has been Made.
pls suggest the possible solution on this.
Rgds,
Yogesh

Dear sujit,
We have Ztcode developed for Stock posting reversal not for UD reversal.
Just want to know inspite of checking box for Long term planning in MIC also in Inspection plan.
Is there any provision for reentering results for already closed MICs.
User has made wong input entry while recording results.
Rgds,
Yogesh

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve
Any one can help me

Thank you for your response - I'll give it a go.
Also, just to update, my iMac cursor seems to glitch a little bit less now. It seems that at least ONE of my problems may have been caused by sitting my iPhone upon my WACOM tablet. The tablet must receive some sort of disruption from having my phone on it - and removing it seems to remedy a fraction of my mouse-jumping problems - if only for a meanwhile.
The mouse cursor still does jump around on its own occasionally, and the other mouse problems do persist - so this must not be the only culprit for my array of problems.

Automatically printing result of Stock Posting

Hello all,
In the tab Stock Posting in Stock Mangament\Stock transactions\Stock posting you can add the figures of the stock count per item.
A list of the differences can be printed, however id these differences are reconciled, is it possible to get a print of this reconciliation automatically just like the goods issue or goods recept postings?
We can ofcourse print the stocktacking update list, but you can change the figures after printing this list, so a print after pressing the reconcile button should be better.
Please advise.
Best regards,
Carl Verhagen

Thanks Gordon for your answer.
We also can push the printbutton as a difference report will be printed then.
We just want some prove that the differences are booked just financial report or something like that.
I can ofcourse write a query over the OINM table that they can run to create some report, but I think it's still the same as printing the difference report.
But thanks for your suggestion.
Regards,
Carl Verhagen

Automatic PO and automatic header condition determination

Dear all,
We have business transaction where PO is getting created automatically. In real time, user is entering header condition manually, because header conditions are not allowed to have access sequence. It is difficult for users on tracking header condition manual entry details.
Can anyone throw some lights for using routine to have automatic entry of header condition while PO is created automatically ? Which routine to be explored to achieve automation of header condition value in PO ?

hi
m/06 frieght condition make header condition tick
changes which can be made
tab
under
tick the header condition
heder condition of fright
as three type
%basic
value
quantity
if you enter header condition value basis100
two line items is there in your PO ,On that time it will be updated 200 in header value
if you enter header condition % basis it will take %of total value after that
the amount will be distributed amoung the items
regards
vijay
Edited by: vijju489 on Jul 16, 2010 12:10 PM

Auto stock posting based on Calculation

Hello to all,
Client receive a raw material, Quality checks impurity level. 2% is acceptable impurity. If impurity is within 2% stock posting is done for total GRN qty.
If impurity is more than 12%, lot is rejected and entire qty send back to vendor.
Now my scenario is if QC records impurity as example 7% the they
calculate 7-2=5% here 2 is earlier mentioned allowable/acceptable impurity.
Then they have to deduct 5% from total qty and post it to
Unrestricted stock. Client is asking for this automatic calculation and auto stock posting to Unrestricted stock based on deduction calculation.
Can any one suggest a solution for this.
Here I am giving an example.
Impurity= 7%
Impurity above allowance= 7-2=5%
GRN qty=1000 kg
Calculation for deduction = [1000- (1000*(5/100) )]= 950 kg = qty needs to be posted to unrestricted stock.
Client needs this calculation to happen automatic and this qty
should be automatically posted to unrestricted stock. He is not willing to calculate this and put qty manaully.
Is there any solution available.
Thx in advance

Did you read the help on the enhancement? This is from 6.0.
If you use this, you must do the posting via posting line VMENGE08 and only the posting from this line will be affected by the User exit.
Description
     The customer exit enables the control of a separate quantity posting in the usage decision.
     A prerequisite for activating the exit function is that you use the quantity postings to other stock on the stock overview screen of the usage decision transactions.
     To do this, you must activate the fields for quantity bookings to other stock for the inspection type field using the transaction SFAC (Customer field selection). After they are activated, a new quantity appears in the stock overview for the usage decision.
     In addition, in view TQ07M you need to maintain the movement types for field RQEVA_VMENGE08 .
     The exit permits you to influence the quantity posting using structure QBEFU. Here, additional data can be determined and returned.
     The posting is then carried out according to the changed data as part of the normal usage decision postings.
Edited by: Craig Snyder on Apr 1, 2008 9:29 PM

Stock Posting List and Quantity in Warehouse show different quantities

Hi all,
I have an implementation running on 2007 Edition.
The case is that there is one item that shows different quantity on Stock Tab of Item Master Data and on Stock Posting List for a specific warehous*e. Specifically, on Stock Data of Item Master Data it shows 100 units and on Stock Posting List shows 254 as current Balance. So there is a difference of 154 units
I checked "Expanded" Menu of Stock Posting List in case any special selection was made but no transaction was excluded.
The only extra hint I have is that the difference of 154 is equal to a Stock Reconciliation Transaction that was made (without being sure that this is the cause).
From my point of view, Stock Posting List has the correct quantity and Onhand on Item Master Data shows 154 units less than the correct one
Has anyone faced this one before?
Thanks in advance
Gerasimos

Hi,
Please check Note No. : 1503919. A detect query is mentioned in the Note.
Kindly check the results obtained and if the Item detected is shown in the result obtained, you need to report the issue to SAP Support.
Kind Regards,
Jitin
SAP Business One Forum Team

Stock posting of 08 inspection lot which is having status of LTCA

Hi Freinds,
I am having problem in posting the stock from Quality to unrestricted.
The details are as follows;
A stock transfer Inspection lot is created and by mistake given the UD as "Rejected" and cancelled the Inspection lot.
Later it has been realised and the UD code has been removed and left blank and Saved the UD screen.
The stock is in Quality and it has to be posted to Unrestricted.
If I go to transaction QA02 to "Reset the cancellation", it is greyed out and we are unable to do that.
We are unable to give UD also because the Inspection lot status is not allowing.
I have used transaction "MB11" with movement type 311, I am getting the error as "Stock posting only possible in QM".
Please let me know how to post the stock to Unrestricted.
Thanks
Giri
Edited by: Giri on Dec 15, 2009 10:23 AM

Hi Gajesh,
The problem is still continuing and we have implemented notes 48815 and 174877, however we could not able to solve the issue.
In the mean time we have asked SAP to get the solution.
The sequence of process followed by the user where in we have reached this situation;
1. A stock transfer Inspection lot(IL) is created (using MIGO, 322 movement type)
2. For this IL, they have gone to QA32 and given the UD as "R" and they didn't post the stock and SAVED the IL.
3. They went back once again to UD screen using QA32 and cancelled the IL and SAVED (Stock posting not done even now). At this point the IL status is LTCA
4. They went back once again to UD screen using QA32 and "Revoked" the UD and SAVED (Stock posting not done even now).
5. Now the stock cannot be posted and the lot cannot be revoked.
So we have asked SAP for help, I will keep you posted. In the mean time if you get any idea, please propose.
Thanks
Girish

System shud restrict stock posting of 04 inspection lot

Dear ALL,
Pain Area - whenevr Process order get release 03 inporcess inspection lot generates and after Process order get confrimed
O4 inspection lot generates , Evry time we use to process 04 Inpsection lot and then stock posted from Quality to Unrestrcted and finally , urestricted stock goes to market . NOw 03 inpsection lot remains in Created status , system not restriced for 04 activity i.e stock posting . So I want to restrict stock posting of 04 inspection lot if 03 inpsection lot doesnt have UD status .
please suggest .
Regards,
Prerna Verma

Do you want to put a hard error when UD is taken for O4 lots, if the corresponsding SF lot is not released? This will stop users releasing the 04 lots and personally I am not in favor of writing a piece of code in User exit at UD and stiop the release of a Finished Batch.
I have worked on similar requirement where users used to check manually the SF batch - UD prior to release a Finished Lot. to reduce the manual work and data transpose errors, we have used a calculated char. SF batch released? and assigned it in the finished product inspection paln.
We copied the standard FM - QEFC_FORMULA_CALC_EXAMPLE and written a logic to look the consumed SF batch is released or not .The Function Module is assigned to a Calculated Characteristic u2013 the user will then be able to Calculate the characteristic during Results Recording of a batch of Finished Product to determine the Release Status of the issued batch of Semi-Finished material, as opposed to having to look it up manually. We looked at the Q-score to decide a SF batch is released , rejected or UD not taken. The Function Module used the name of the Master Inspection Characteristic (MIC) and the Material Type of the Inspection Lot to determine the Inspection Lot Q-Score to return.
With this set up you will not issue a hard error at the time of UD for Finsihed batch at the same time users will know the SF batch status when the results were recorded for Finished batch.
If your requirement is a Hard error, simply go for the user exit suggested and write a logic to look for the Semi Finished Batch consumed.
Hope it helps.
Thanks,
Ram

Inspection Lot stock posting automatically

Hi,
In my company for e.g. the stock in quality is 100 nos. while doing QA32 i am specifying 20 nos for unrestricted stock and saving it. But while checking the stock the total quantity is 100 in unrestricted stock. I again tried again for another 100 material now i specified 30 to blocked stock and remaining i left it in quality. But also it is taking remaining 70 to unrestricted stock is there any special settings for this kind of lot. I am using inspection type 01. But for inspection type 04 partial stock posting is happening.

Hi,
The problem you are facing is controlled by customizing of selected set. When you define selected set code using T.Code: QS51, an option is there to propose stock posting and a check box for background stock posting. If you keep both the options blank for the given UD Code/ selected set code, the system will not automatically post the stock.
Thanks
SUMIT GUPTA

Automatic stock posting

Dear All,
in qs 53 i have fixed setting for selected set code A as posting proposal UD to unrestriced use stock. but when i put this code to a lot for ud and then save, stock does't go to unrestricted stock and i have to post it manually. now please guide me where is lacking.

Hi,
By the sounds of it you are approving the lot manually, therefore you need to click on the posting proposal button in order for the stock to be posted to unrestricted. If you are using auto UD then the system will take UD for you as well as do the stock posting according to the proposal setup within the selected sets.
Regards,
Roderick

Automatic reorder point and safety stock caluclation- MRP type:V2

Hi,
I want the system to calculate reorder point and safety stock. To simulate this i created one material with
MRP type:V2, service level as 97%, Forecast model:D,Hist. period:12,Forecast periods:12, and I entered
the historical value for past 12 months as 100 nos in material master.
04.2009     100
03.2009     100
02.2009     100
01.2009     100
12.2008     100
11.2008     100
10.2008     100
09.2008     100
08.2008     100
07.2008     100
06.2008     100
05.2008      100
Then I went to MP30 and executed the forcase.When I checkd the material master the system has calculated the reorder point as 14 nos. But there is no value updated in safety stock field.
Now I have two questions.
1) How the system has arrived the reorder point value as 14 nos.
2) Why there is no safety stock updated in material master.
Could u please clarify this.
Thanks and Regards
Purushothaman

Hi,
This is further to my preivous mail. I have changed the consumption values and now i am getting the safety stock.
MRP type:V2, service level as 97%, Forecast model:D,Hist. period:12,Forecast periods:12, and I entered
the historical value for past 12 months as.
04.2009     100
03.2009     80
02.2009     110
01.2009     85
12.2008     90
11.2008     95
10.2008     125
09.2008     90
08.2008     90
07.2008     92
06.2008     101
05.2008     100
After executing the forecase the sytem has calculated the below parameter.
Basic value:95.759
MAD:11.448
Safety stock:10.252
Reorder point:23.658.
Can anyone explain me how these calculation arrived.
Thanks and regards
Purushothaman

Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

Hello,
We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
Can someone throw more light on the customizing/BADI/enhancements etc required??
Thanks and Regards..

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

Subcontracting for Sales Order Stock and collective Transfer Posting

Dear Expert,
We have a scenario in subcontracting wherein the sales order the customer also wants to see the components and as such along with the Header item of subcontracting ,we also mention the components as another line item in the sane Sales Order.
Now from the sale sorder two Po's are created onr for the subcontractor and one for the compnens to be procured.
Since the components are procured on sales order stock there is noway we can issue it to the Vendor stock through Movt .Type 541.
As per SAP AG WE CAN:
"ubcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the u201Cstock of material provided to vendoru201D but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.Since the components are not transferred to the u201Cstock of material provided to vendoru201D, we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor.This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks."
But my query is that how many such storage locations will be created for the subcontracting vendors.
Secondly for the stock transfer from sales to storage location , we have lots of sales order, is dera way through which we can do bulk transfer rathar than clicking at new item everytime and then doing the transfer posting.
your expert advice shallbe helpful in resolving a longtime pending issue , waiting for the response.
Regards
Jabeen

This is a known issue, the system doesnt allow stock to have two special stock statuses at the same time.
Your concern of having to make multiple storage locations is valid (since this is a configuration).
I suggest you do the following
- Configure a warehouse and a single storage type (say 001). Allow mixing of materials in a single bin
- Assign this warehouse to a new storage location.
- Create a bin for every sales order number in the warehouse.
- When goods are moved to subcontractor, perform a transfer posting to the storage location, and perform a putaway to the respective bin. The putaway strategy can be tweaked using a user exit to go to the relevant bin. This way you do not have to enter the WM transaction for putaway.
- To consume the stocks, you can use 231E movement (MB1A). On the WM side, the picking strategy can be enhanced so that the picking TO is generated with the correct source bin. Make sure the GL account and CO objects are as per FICO requirements.
This way you can track the stocks binwise (bin level reports are available in WM), perform physical inventory and also consume the stocks from the relevant bin automatically.
We had faced the same situation, and we ended up not having sales order stock at all.
Hope this helps.
Regards,
Aroop

How to send automatic mail and put attache file on batch file ?

how to send automatic mail and put attache file on batch file ?
START MAILTO:[email protected]?SUBJECT=PHONE%CALL^&BODY=Testing

Hi,
Do you want to use a batch file to create new email message (including recipients, subject and email body) with attachments? If so, I'd recommend you post your question in the Scripting Guys forum for further assistance:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Please feel free to let me know if I've misunderstood something.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Automatic UD and Automatic Stock Posting

Similar Messages

Maybe you are looking for