Automatic update purge?

I have been refusing to allow some updates in automatic update for some time... every time it try's to update iphoto and iweb via the following
"This update to iPhoto contains new calendar, greeting card, and postcard themes for use with Apple print services, including a variety of holiday card designs. It also addresses compatibility for accessing Aperture 1.5 content in iPhoto."
I do not use aperture and ive been trying to avoid adding this 100mb's to my computer every time automatic updates loads.. is there anyway to permanantly refuse these updates, or is there a way i can downloaded them, then delete them, and all previous unneeded updates
its becoming to me as annoying as desktop cleanup wizard, accept i have to open this, tell it no, and close it every time
~David

Machado wrote:
thank you so much. is there a place where i can locate old updates that are taking up space to remove them manually?
Old automatic software updates are not stored on the HD anymore. All there is a Receipt which is necessary in order to inform the systems that the update has been installed.
Only manually downloaded updates are saved, for obvious reasons. They are usually in the download directory.
I don't know what goes on with automatic downloads when the box "Download automatic updates automatically" is checked. I presume that after they are installed, the downloaded file is automatically trashed.

Similar Messages

How to set up automatic cache purge

I am using the event polling table for setting up automatic cache purging.
I have created a table 'event polling table' in the database with the following fields:
CATALOGNAME
DATABASENAME
OTHER
SCHEMANAME
TABLENAME
UPDATETIME
UPDATETYPE
LOAD_ID
with TABLENAME, UPDATETIME, UPDATETYPE as non-nullable fields.
Then I have imported the table to the physical layer of the rpd, set up 'Oracle BI Event tables' in the Utilities as this table and set up a polling frequency of 15min.
I have created a report with 2 columns (DeptID, Saleamt) from 2 tables (Department, Sales) respectively. Both these tables were made 'cacheable' in the physical layer with cache never expires. Now the saved report is ran by logging in once again. So a cache entry is registered. My NQSCONFIG file enables cache.
I have added these 2 tables to the event polling table after the cache entry was registered. Technically after 15min, this cache should be purged automatically as the request created was from these 2 tables. But that does not happen. Even after half hr when I log in and run this report a cachehit occurs as cache still persists. My cache folder is the C:\OracleBIData\cache. I also check entries in the Repository (Manage ->cache).
Please let me know where am I making a mistake.
My goal is to get cache purged automatically every time there's an entry in the EPT. (To test when I create an entry in the EPT, I give the tablename and updatetype (=1), the updatetime is obtained automatically as sysdate.
Thanks
===================================================
For reference I have copied an earlier posting here:
===================================================
lets look at all your questions one by one
As the event polling table gets a row added for each table whose data is updated at the end of each ETL run, when exactly does the BI server purges cache related to that table - As soon as the polling happens and it finds a new record in your table
Lets say I set up a polling frequency (in Tools -> Utilities -> Oracle BI Event Tables) to every 60 minutes. At the end of every 60 minutes does the BI server restart by itself or does the polling take place without restart. - Polling takes place only when the server is up (there is no need to restart)
At the end of every 60 minutes does the BI server poll the event polling table whether or not any new rows are added to it? -(Yes )
What exactly happens when a new record is added to the event polling table in the database. - (The cache is purged )
If at the end of the ETL run data in 3 tables has changed, would 3 records be added to the event polling table in the database. - (yes , after the polling happens)
Let me know if you have more questions ...
Another way you can set it up is to create a batch file which would purge a table as its updated (use a procedure to capture the tables which have a value of 1 for update_type or use triggers to populate a table with these table names ) ...once purged you can set up your cache by using ibots (use javascripts) .
=============================================================================

I seem to have all the steps running except #3 - which is clearing the cache!
select T54927.UPDATE_TYPE as c1,
T54927.UPDATE_TIME as c2,
T54927.DB_NAME as c3,
T54927.CATALOG_NAME as c4,
T54927.SCHEMA_NAME as c5,
T54927.TABLE_NAME as c6
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER in ('') or T54927.OTHER is null )
minus
select T54927.UPDATE_TYPE as c1,
T54927.UPDATE_TIME as c2,
T54927.DB_NAME as c3,
T54927.CATALOG_NAME as c4,
T54927.SCHEMA_NAME as c5,
T54927.TABLE_NAME as c6
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER = 'cac7057v' )
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>>, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121830>>):
insert into
MPO_OWNER.MPO_EVENT_POLLING("UPDATE_TYPE", "UPDATE_TIME", "DB_NAME", "CATALOG_NAME", "SCHEMA_NAME", "TABLE_NAME", "OTHER") values (1, TIMESTAMP '2009-03-27 16:59:19', 'Trading', 'remedy', 'MPO_READ', 'MPO_POSITION_DATE_CHOICES', 'cac7057v')
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>>, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>> DbGateway Exchange, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>> DbGateway Exchange, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>> DbGateway Exchange, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>> DbGateway Exchange, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121831>>):
select T54927.UPDATE_TIME as c1
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER = 'cac7057v' )
group by T54927.UPDATE_TIME
having count(T54927.UPDATE_TIME) = 1
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>>, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>> DbGateway Exchange, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>> DbGateway Exchange, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121875>>):
delete from
MPO_OWNER.MPO_EVENT_POLLING where MPO_OWNER.MPO_EVENT_POLLING.UPDATE_TIME = TIMESTAMP '2009-03-27 16:59:19'
What am I missing? My NQServer.log shows this:
The physical table Trading:remedy:MPO_READ:MPO_POSITION_DATE_CHOICES in a cache polled row does not exist.
Any thoughts are appreciated.
Thanks
Mano

How to automate the purging of archivelogs on primary when backing up from physical standby?

Hi,
When configuring archivelog backups to run from my Active Standby database (11.2.0.3) I am running into an issue where the archivelogs on the primary database are not getting purged. This is resulting in the archiver hanging on the primary.
run {
allocate channel ch1 type 'sbt_tape'
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
filesperset = 32
(archivelog all   delete input );
backup current controlfile spfile ;
My archivelog deletion policy is set as follows on both the primary and standby
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
When I run REPORT OBSOLETE from RMAN however, the primary database seems to have outdated information in it.
I have also observed the following in the RMAN backup log:
RMAN-08120: WARNING: archived log not deleted, not yet applied by standby.
Do I need to perform additional configuration to automate the purging of archivelogs on the primary database or is there an issue with the backup options and / or deletion policy specified?
Many thanks,
Gary Allen
DBA

The primary and standby databases are in sync and have been for over a week now.
Primary:
SQL> select max(sequence#), applied from v$archived_log group by applied;
MAX(SEQUENCE#) APPLIED
           268 NO
           267 YES
Standby:
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
           268
For some reason though, the primary controlfile is not being updated properly and when I run the RMAN REPORT OBSOLETE command the data is nearly a week old yet on the standby the same command retrieves up to date information:
Primary:
RMAN> report obsolete
Backup Set           136    06-AUG-13
Backup Piece       136    06-AUG-13          48ogk9ik_1_1
Backup Set           138    06-AUG-13
Backup Piece       138    06-AUG-13          4aogkqbm_1_1
Backup Set           142    06-AUG-13
Backup Piece       142    06-AUG-13          4eogl5i6_1_1
Backup Set           144    07-AUG-13
Backup Piece       144    07-AUG-13          4gogmc0a_1_1
RMAN> report obsolete
Standby:
Backup Set           156    13-AUG-13
Backup Piece       156    13-AUG-13          4uoh65o7_1_1
Backup Set           159    13-AUG-13
Backup Piece       159    13-AUG-13          51oh6d0r_1_1
Backup Set           162    13-AUG-13
Backup Piece       162    13-AUG-13          54oh6n8a_1_1
Backup Set           165    13-AUG-13
Backup Piece       165    13-AUG-13          57oh78qr_1_1

I automatically updated to Firefox 4.0.1 for Mac, and now the program misbehaves. It hangs when I try to quit. Can I downgrade to 4.0?

I was running 4.0 on my Intel Mac (Leopard 10.5.8), and everything was fine. Firefox automatically updated me to 4.0.1. Then I noticed my computer running very slowly. I am unable to quite Firefox without forcing a quit.
Can I reinstall 4.0? If so, where can I download the original version?
Thanks.

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:'''1.9.0.11''') Gecko/'''2009060214''' Firefox/'''3.0.11 FBSMTWB'''
Your users agent is stuck at Firefox 3.0.11 due to a extension during when you had 3.0.11 and it tacked on stuff on end and kept it from updating the version number. This was due to the "Fast Browser Search toolbar" extension (FBSMTWB). This issue is not a problem with Firefox 4.0 and newer.
See this on how to reset it to normal. https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent

In Pages 5, how to get date to automatically update upon opening a template?

I'm using Pages 5.2. In prior versions of Appleworks and Pages I was able to construct and save a template in which the date would automatically update to the current date when the template was opened. I have tried "Insert Date" and I can click on that to update to current date, but I don't always remember to do that and therefore, some of my documents are dated several months prior.
Can't seem to find how to do it under Pages 5.2 Anyone have help or a work around?

I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... although I've been unable to work out how...
Amnon

On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843>

Numbered lists in text boxes automatically updating

I have seperate text boxes that are involved in numbered lists, and I want to be able to reorder the text boxes so that they automatically update the numbers within them. How do I do this?! As you can see when I move the text box containing 2.0 numbered list, the following numbers do not update. How do I create this updating numbered list in seperate text boxes?

If you mean the text function in the drawing toolbar, it isn't possible.
You should use frames.

Automatically updating files on local testing Server

I'm using EasyPHP-5.3.5.0 as a testing server on my local machine (I've use EasyPHP for several years). I set up the Site Definition in DW8 using the testing server root folder (www) as the development area; however, this caused problems when I attempted to upload from within DW to the Remote (production) server. I then modified the Site Definition to use a local folder. other then the Testing Server folder, for development which solved the upload problem. Then in the Site Definition I setup the Testing Server using the "PHP MySQL" model with "Local/Network" access. The Testing Server folder was set to "C:\Program Files\EasyPHP-5.3.5.0\" and the "Refresh Testing file list automatically" box was checked. The URL prefex was set to "http://127.0.0.1:8888/" as defined in the EasyPHP instructions. My problem is that Dreamweaver is not updating the files on the testing server when I save a file in the development folder. The development folder and the Testing Server reside on the same computer. If I copy and paste a file to the testing server everything works fine. I would like the testing server files to be automatically updated when I save a file in the development folder which is what the Site Definition seems to indicate should happen. Any thoughts on what the problem is and how to fix it would be appreciated.

> UPS tools that will only accept POST data coming from an
https page
Oh - I see. I think this will be hard to do. You'd need to
get a local
certificate and all - not sure how to go about that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:ev39uo$pm3$[email protected]..
> Murray *ACE* wrote:
>> Why do you want to do this?
>>
>
> to test locally?... I've been able to test everything
locally so far on my
> virtual testing server, and thought it'd be nice if I
could test the
> shopping cart locally as well. But it uses third party
UPS tools that will
> only accept POST data coming from an https page.
> And yes, I'm pretty sure it's a stupid idea... But as I
said, maybe
> there's a trick I'm not aware of...
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
>
> An Ingenious WebSite Builder:
http://sitelander.com

I restarted my Firefox this morning and it automatically updated to version 9.0.1. Since that update, I am unable to open Firefox - it is giving no response.

I restarted my Firefox this morning and it automatically updated to version 9.0.1. Since that update, I am unable to open Firefox. When I try to open it (and this is on a Mac), it does not respond and freezes with a white screen, the tab says "connecting...," and there are no bookmarks or anything showing on the browser. It does not respond at all - I cannot even click into the navigation to change any of the preferences. Please, someone help! Not having Firefox is killing me!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Installed itunes on another computer and need to turn off automatic update

I have itunes on my desktop at home and it is set to manually update my songs on my ipod (I have more songs on my 80GB ipod video than on my desktop). I am now traveling with a laptop and just installed itunes on my laptop. itunes won't let you turn off the automatic update setting until you plug your ipod into your computer. I am afraid to plug my laptop into my computer because it will automatically update the music (wipe out all my music on my ipod). Can I somehow turn off automatic update (switch to manual) before I plug my ipod into my laptop? Also, I know there is software that allows you to move the music from the ipod to the laptop, but I don't want to move all that music to the laptop. I want to continue updating my ipod manually on my laptop. Please help. Thanks in advance.

Hi,
If you set the iPod to be manually managed on one computer, that setting will follow the iPod to any other computer you connect it to. However, even if you don't have the iPod set that way, when you connect the iPod to a foreign library, you'll receive an message in iTunes when it recognizes the iPod that the iPod is synced with another library, and you can click 'Cancel' and still get to the iPod's Summary page to put it into manual mode, without it changing any content on the iPod. If it makes you feel better, you can also click Edit and go to Preferences, click the Syncing tab, and select the option to "Disable automatic syncing for iPods & iPhones" prior to connecting your iPod.
Hope this is helpful
CG

After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

After an automatic update, Firefox will start but immediately terminate. How can I fix this problem? I am sick and tired of manually un-installing Firefox!!

Since Firefox version 12, after Firefox automatically applies an update, Firefox will launch and immediately terminate.
The only solution is to manually un-install Firefox, completely clean the registry of Firefox entries, and manually re-install a previous version of Fiirefox that will work -- I use version 4.0. And then manually update that version to the current version.
I DO NOT install the new automatic update option -- that is, the automatic maintenance option.
BUT never the less, EVERY TIME I check for the latest version of Firefox using HELP --> About
Firefox, the UPDATE is AUTOMATICALLY RUN and FIREFOX WILL NOT WORK AGAIN.
I have put with this none sense for 18 versions of Firefox - MAKE IT STOP!!!!!!!
Thanks, David Breed

You can use one of these to start Firefox in <u>[[Safe Mode|Safe Mode]]</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
Can you bring up the Profile Manager to create a new profile (possibly when starting in Safe Mode by holding down Shift)?
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanks

Can anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

TS4083 Is there a way or a setting my folders in Mail to automatically update across all devices? if I transfer an email to a folder for follow-up on my PC, my folder in Mail on my iPhone doesn't update until I actually go into the folder and update manua

Is there a way (or a setting) for my individual folders in Mail to automatically update across all devices? For example, if I transfer an email to a folder for follow-up on my PC - say 10th of the following month - the same folder in Mail on my iPhone doesn't update until I actually go into the folder and update manually. Interestingly though, if I create a new folder on any of my devices they automatically appear on the other devices so it is just the actual contents that I am referring to here. Appreciate any help or guidance.
Regards
Justin

You can turn mail off in the settings but then you can't use it for anything, including the "test" that you want to perform.
Settings>Mail, Contacts, Calendars>Account Name>Mail>Off. That totally turns off the mail account.
As long as mail is turned on and you launch the app, it will look for an download new mail.

Automatic update purge?

Similar Messages

Maybe you are looking for