Automatic updates maxing out CPU on windows server 2003

Since this last roll out of updates that have come through I have noticed on my 2003 servers that the automatic update service is maxing out the cpu. The updates are simple downloading and are set for a deadline, so the updates have not officially
installed yet. They are all virtual machines running in an VMware environment. They are Server 2003 SP2 x86 machines. Any suggestions would be appreciated. When I turn the automatic update service back on the cpu pegs.

I read that IE and Automatic Updates are correlated and if there is a cumulative update waiting for IE then this can cause the CPU issue. For me I had IE 6 still on my Windows 2003 servers and I installed this update that came out just recently:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=41033
After you install this and reboot, then things settle down and you will see the rest of the updates you've approved in WSUS ready to install (if you have any).
I'm pretty sure this will fix it for you.
Note - just for reference, the KB is KB2888505

Similar Messages

MS14-044 for SQL Server 2008 Standard on Windows Server 2003?

MS14-044 was recently released and states that it applied to MS SQL Server 2008 SP3, yet the patches available for this security bulletin do not list Windows Server 2003 in the supported operating systems. Does MS14-044 not apply to SQL Server running
on Windows Server 2003? If it does apply, why isn't there an update available to run on Windows Server 2003?

Hi Chasg76,
According to your description, the patches available for MS14-044 do not list Windows Server 2003 in the supported operating systems and you want to know whether MS14-044 applies to SQL Server running on Windows Server
2003.
Based on my test, KB2977321 applies to SQL Server 2008 Service Pack 3 product and it does apply to SQL Server 2008 SP3 running on Windows Server 2003.
I installed SQL Server 2008 Service Pack 3 in Windows Server 2003 SP2 x86. After the service pack 3 installation completed, KB2977321 was offered in the Automatic Update.
Besides, you can manually install the update by downloading the update form the Download Center web site as well.
I also tried the manually installation and I downloaded the Security Update for SQL Server 2008 Service Pack 3 (KB2977321) from this web: Security Update for SQL Server 2008 Service Pack 3 (KB2977321) (https://technet.microsoft.com/library/security/MS14-044),
it was installed successfully.
After installed security upgrade, I checked the file attributes and compared to this article: MS14-044: Description of the security update for SQL Server 2008 SP3 (GDR): August 12, 2014(http://support.microsoft.com/kb/2977321/en-us).
The result is the same.
According to my test, MS14-044 applies to SQL Server running on Windows Server 2003 even though Windows Server 2003 is not listed in the supported operating systems.
Best regards,
Qiuyun Yu

Server 2003 Automatic Update Greyed out

I have a primary Server 2003 that has the automatic up feature greyed out. I found the group policy setting on the domain controller and changed it with a reboot but it is still greyed out. I also have 3 member servers where the automatic updates are greyed out and can not be change. Does anyone know why the option is greyed out under the administrator account? Any help would be appreciated.

When an option is greyed out in the user interface this is typically caused by an applied Group Policy Object (GPO)
Using rsop.msc on the console of your server you can see which Group Policy Object on what level (Local settings, Active Directory Site settings, Active Directory Domain settings, settings from Organizational Units) applies the setting. You can then change the setting in the right Group Policy Object(s).
More information on running rsop.msc on Windows Server 2003 can be found in Microsoft Knowledgebase article 323276.

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Biztalk Server 2010 is Maxing Out CPU Frequently

Hi,
Most of the time my production server is getting this issue Maxing Out CPU Frequently.
All the time i restart the biztalk server and clear the application pool the issue gets resolved.
Could any one advice me what is causing this issue.
Thanks,
Binu

there may be many reasons for cpu usage spiking to maximum.
you better use following tools to figure out whats going wrong
MessageBoxViewer download here
BizTalk terminator Download here
also use perfmon tool in biztalk servers and set appropriate settings to gather information
look here
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Out of memory using Windows Server 2003 and Oracle 9.2.0.3

Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.

CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez

About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

i sue windows 7 and my orignal macintosh formated and get online same window

How to install Windows updates for Windows server 2003 SP2 Manualy

Hi All,
We have 10 machines running Windows server 2003 SP2. These machines are ISA servers kept in DMZ.
So these servers do not have internet access any any means. We are receiving Non compliance for not patching them for specific .NET framework patches. We have installed them but still the Scanning tools says it is not installed.
We have planned to check it through Windows update but as it is in DMZ there is no Internet connection and we also cannot push through WSUS server as well.
Is there any way we can get the update package in Bulk so we can manually patch them rather than manually downloading them 1 by one and installing them ?
Gautam.75801

Hi Gautam,
To achieve your goal, I suggest you set up a WSUS server on the disconnected network, then exporting updates and metadata from a
WSUS server on a connected network and importing all that information into the WSUS server on the disconnected network.
For more detailed steps, please refer to this article below:
Set Up a Disconnected Network (Import and Export Updates)
https://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
In addition, here is a WSUS forum below if there is any WSUS related question:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverwsus&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

IPhone 3G - updated to v3.0 - iTunes 8.2 and Windows server 2003 problems!

Argh! I just lost an ability to sync my iphone with my Windows laptop/Outlook running Windows Server 2003.
Everything worked fine until I upgraded iPhone 3G to version 3.0
That forced me to iTunes version 8.2 update.
The AppleMobileDeviceSupport.msi which comes with the latest version of iTunes requires Windows XP SP2 or newer and installation fails.
Is there any workaround available?

Hello
I'm having the same problem! Did you find a way to work around it?

ALUI + Windows server 2003 + WebLogic server + SSO via WIA

Hello,
I'm trying to configurate SSO on ALUI in my environment.
I've got two servers.
On server 1 is installed ALUI 6.5 on WebLogic server.
On server 2 is installed Active Directory.
Both servers are attached to one domain from active directory and both servers use Windows server 2003 as operation system.
My way of implementation SSO in this environment is folowing:
1. I install IIS on server 2.
2. I deploy WebLogic plug-in for IIS and configurate it to proxy. This is configurated on server 2.
3. I check that this setup works by trying to connect to the portal via IIS.(true)
4. I configure Windows Integrated Authentication for the /portal virtual directory.
5. I install Identity Service for AD (server 2)
6. I configure Authentication Source and synchronize my Users from AD. After users have been synchronised into the portal, I validated setup by trying to login on the portal as one of AD users.
7. I change portal Authentication Source type to Synchronization only and select SSO as Authentication partner in portal administration.
8. I modify Authentication source prefix, enable SSO, and select SSO provider (for WIA SSOVendor=5) in the portalconfig.xml file
<setting name="DefaultAuthSourcePrefix">
<value xsi:type="xsd:string">mydomain</value>
</setting>
IE on a computer in the mydomain is configured to "Automatic logon with current name and password". Site points to the portal(server 1 ) via the proxy on the server 2 server is in the local intranet zone, but this configuration is on running.
logs from weblogic plug-in (server 2):
================New Request: [portal/server.pt.wlforward] =================
Wed Nov 19 09:27:24 2008 <484412270832442> SSL is not being used
Wed Nov 19 09:27:24 2008 <484412270832442> resolveRequest: wlforward: /portal/server.pt
Wed Nov 19 09:27:24 2008 <484412270832441> Wed Nov 19 09:27:24 2008 <484412270832442> timer thread starting
URI is /portal/server.pt, len=17
Wed Nov 19 09:27:24 2008 <484412270832442> Request URI = [portal/server.pt]
Wed Nov 19 09:27:24 2008 <484412270832442> attempt #0 out of a max of 10
Wed Nov 19 09:27:24 2008 <484412270832442> Trying a pooled connection for '192.168.130.103/80/80'
Wed Nov 19 09:27:24 2008 <484412270832442> getPooledConn: No more connections in the pool for Host[192.168.130.103] Port[80] SecurePort[80]
Wed Nov 19 09:27:24 2008 <484412270832442> general list: trying connect to '192.168.130.103'/80/80 at line 1239 for '/portal/server.pt'
Wed Nov 19 09:27:24 2008 <484412270832442> INFO: New NON-SSL URL
Wed Nov 19 09:27:24 2008 <484412270832442> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Wed Nov 19 09:27:24 2008 <484412270832442> EINPROGRESS in connect() - selecting
Wed Nov 19 09:27:24 2008 <484412270832442> Local Port of the socket is 8610
Wed Nov 19 09:27:24 2008 <484412270832442> Remote Host 192.168.130.103 Remote Port 80
Wed Nov 19 09:27:24 2008 <484412270832442> general list: created a new connection to '192.168.130.103'/80 for '/portal/server.pt', Local port: 8610
Wed Nov 19 09:27:24 2008 <484412270832442> WLS info in sendRequest: 192.168.130.103:80 recycled? 0
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Accept]=[*/*]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Accept-Encoding]=[gzip, deflate]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Accept-Language]=[cs]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Authorization]=[Negotiate TlRMTVNTUAADAAAAAAAAAEgAAAAAAAAASAAAAAAAAABIAAAAAAAAAEgAAAAAAAAASAAAAAAAAABIAAAABcKIogUCzg4AAAAP]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Cookie]=[ptLTCN=ptLTCDV; ptrecentfolders=336-; JSESSIONID=MMhLJvThCGWyn9knTvgh9dRXMzH0N70JSm8JjS7tKbjQyNvhkX21!-1901726998; plloginoccured=false; ptLastLoginAuthSource=]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[Host]=[192.168.130.83]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from client:[UA-CPU]=[x86]
Wed Nov 19 09:27:24 2008 <484412270832442> URL::sendHeaders(): meth='GET' file='/portal/server.pt' protocol='HTTP/1.1'
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Accept]=[*/*]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Accept-Encoding]=[gzip, deflate]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Accept-Language]=[cs]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Authorization]=[Negotiate TlRMTVNTUAADAAAAAAAAAEgAAAAAAAAASAAAAAAAAABIAAAAAAAAAEgAAAAAAAAASAAAAAAAAABIAAAABcKIogUCzg4AAAAP]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Cookie]=[ptLTCN=ptLTCDV; ptrecentfolders=336-; JSESSIONID=MMhLJvThCGWyn9knTvgh9dRXMzH0N70JSm8JjS7tKbjQyNvhkX21!-1901726998; plloginoccured=false; ptLastLoginAuthSource=]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Host]=[192.168.130.83]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[UA-CPU]=[x86]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Connection]=[Keep-Alive]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.130.83]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Proxy-Client-IP]=[192.168.130.83]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[X-Forwarded-For]=[192.168.130.83]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[WL-Proxy-Client-Keysize]=[]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[WL-Proxy-Client-Secretkeysize]=[]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Proxy-Remote-User]=[VYVOJ\Administrator]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to WLS:[Proxy-Auth-Type]=[Negotiate]
Wed Nov 19 09:27:24 2008 <484412270832442> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Wed Nov 19 09:27:24 2008 <484412270832442> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Cache-Control]=[no-cache="set-cookie"]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Date]=[Wed, 19 Nov 2008 08:27:24 GMT]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Location]=[http://192.168.130.83/portal/SSOServlet?]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[X-WebLogic-JVMID]=[1729301638]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Set-Cookie]=[JSESSIONID=BZGGJjNMHHySbShbTVQ018X2Tpg5Gc3cb6L28yBqnl9vKGynjLlp!1729301638; path=/]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[Set-Cookie]=[plloginoccured=false; path=/]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed Nov 19 09:27:24 2008 <484412270832442> parsed all headers OK
Wed Nov 19 09:27:24 2008 <484412270832442> sendResponse() : uref->getStatus() = '302'
Wed Nov 19 09:27:24 2008 <484412270832442> Going to send headers to the client. Status :302 Moved Temporarily
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[Cache-Control]=[no-cache="set-cookie"]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[Transfer-Encoding]=[chunked]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[Location]=[http://192.168.130.83/portal/SSOServlet?]
Wed Nov 19 09:27:24 2008 <484412270832442> for 192.168.130.103/80/80, updating JVMID: 1729301638
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[Set-Cookie]=[JSESSIONID=BZGGJjNMHHySbShbTVQ018X2Tpg5Gc3cb6L28yBqnl9vKGynjLlp!1729301638; path=/]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[Set-Cookie]=[plloginoccured=false; path=/]
Wed Nov 19 09:27:24 2008 <484412270832442> Hdrs to client:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed Nov 19 09:27:24 2008 <484412270832442> Content Length Unknown
Wed Nov 19 09:27:24 2008 <484412270832442> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Wed Nov 19 09:27:24 2008 <484412270832442> closeConn: pooling for '192.168.130.103/80'
Wed Nov 19 09:27:24 2008 <484412270832442> request [portal/server.pt] processed successfully ..................
Wed Nov 19 09:27:24 2008 <484412270832443>
If I do same configuration in environment where ALUI is runnig on IIS(without cofiguration proxy and weblogic plug in) than automatic login to portal is right.
Have you got any idea how to solve this?

Here are the steps to enable it (from what I remember)
1. Log into the portal, update the Auth Source, select the "Synchronization" menu item on the left, change the option to 'Synchronization with Authentication Partner' and a new dropdown will appear, select the only option 'SSO Authentication Source'.
2. portalconfig.xml - set the SSOVendor attribute to 5 (WIA) it's currently 0 and AllowAutoConnect flag to 1 on all webservers you'd like this to happen on.
3. IIS Administrator - browse to the portal/sso virtual directory, right click the 'sso' folder and select 'Properties'. In the Directory Security tab click the 'Edit' button in the first section for "Administration and Access". Uncheck the "Allow Anonymous Access" and check the box for "Integrated Windows Authentication" in the second section of the page, on all your webservers
4. Restart the portal on both servers.
There is a good deal of info on WIA on the archives from the Plumtree days
http://forums.oracle.com/forums/search.jspa?threadID=&q=wia&objID=c234&dateRange=all&userID=&numResults=15&rankBy=10001

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Strategy, Planning and Managing bulk updates to large fleet of Windows Servers 2003-2012

a major project at my new job using SCCM is to push out in an organised fashion updates to its fleet of 500+ windows servers. Numbers: 50+ 2003, 50 x 2008, 200x 2008r2, 200x 2012.
This is spread across DC's, File/print, Exchange, Lync, FIM, App, SQL, Orchestrator, with many clustered/NLB, others not.
I am struggling to piece together a plan to attack which server first, in an organised, planned fashion but using collections and SCCM. We also have Orchestrator, although I am not that experienced in using it (but it may server my purposes better?)
I have already downloaded one software update group for all O/S: Server 2003- Server 2012.
I am only interested in the BASE Operating System (Server core, not Application, like exchange/lync).
What are at least the basic principle i should adhere to (ie. target non-critical first)?
Can I deploy updates to all at once, suppressing restart, and then just manage the restart process in a managed/documented fashion?
Can I, should I, depend on SCCM to process updates during assigned maintenance window, to apply updates and then initiate restart at deadline? (This hasnt worked as intended during workstation update deployment).
Should I use powershell/Orchestrator to control reboot process more precisely?
What groups of servers can i manage together and automate restarts during service windows etc.
Thanks in advance. links to blogs/articles are welcome (i found hardly any useful).

Hi Maxwell,
To deploy the updates in SCCM, please follow this article, we can specify the download behaviour and deadline behaviour of installation in the "Deploy Software Updates Wizard":
SCCM 2012 - Deploying Updates
Q: How do I automatically approve and deploy updates with System Center Configuration Manager 2012
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Audigy under Windows Server 2003

Hi!
I've installed Windows Server 2003 for a Project at work but I'm unable to get the audigy working. After insatlling Win XP Drivers I get the message 0x80070057 at the direct Sound Tab of direct X. When i disable hardware acceleration, the system says, there is no sound card. I've already started the service for sound in Windows and the system founds the line in and the MIDI processor, but no output device. I've also tested the KX audio-Dirver but the same problem appears.
Thx for help. And please hurry, it's urgent.
So und hier nochmal auf dutsch:
Ich hab f?r ein Projekt auf der Arbeit Windows Server 2003 installiert um zu schauen, wie es sich darauf spielen l?sst. Aber ich krieg die Audigy nicht zum laufen. Nach der Treiber installation bekomme ich die Meldung 0x80070057 im DirectSound-Tab von direct X. Wenn ich die Hardware beschleunigung deaktiviere, sagt er pl?tzlich, dass er gar keine soundkarte mehr finden kann. Ich hab auch schon den Dienst f?r die Sound-Wiedergabe gestartet und das System findet den Line in und den MIDI-processor aber kein Ausgabe Ger?t. Ich habe auch schon den KX-Treiber probiert, genau das selbe.
Danke f?r Hilfe, beeilt auch bitte, es ist wirklich wichtig und dringend f?r mich!!!

I have audigy 2 NX plugged into a windows 2003 server, ASUS S-Presso.
Although I respect that it is not supported, any help would be appreciated!
All the software installs correctly, once installed, diagnostics completes, etc and the remote control works. The only problem is that he machine will hang (and go 00% CPU) the moment it attempts to make a sound (the NX also goes to "mute").
Audigy sound card driver :- dated: 9/26/2003
The composite device that associates itself with the audigy is:Microsoft, 0//2002 - 5.2.3790.0
(I tried changing the composite device for the one on the audigy CD, and this does not help). I think the composite device it installs came with my wireless mouse/kwyboard from Microsoft?
I tried the standard creative updates, but they do not correct the problem.
I tested the NX on a normal XP laptop and it works fine.
Previously I had a Philips rhythmic edge, and this still works perfectly (.89 drivers). I did uninstall it's drivers and the card but this did not help.
I do have another USB audiodevice on the system. A Tiptel "cyberbox" 00 VOIP gateway. I am concerned about a comflict with this one.
I need windows 2003 because of a work application that requires it, but I would be willing to run w2003 in a VMware it if I was sure that going out and buying a XP home license would solve my problem.
help!

Msi K9N2 Platinum SLI and Windows Server 2003 r2 32 bit edition

Does anyone know or have tried to get this board to work on server 2003 32 bit edition. I seem to get past the raid part but the realtek 8211bl and audio are giving me fits. Any links to good drivers would be appreciated.
Spec of system:
Amd 9950 Quad
4 gig memory
Msi K9N2 Platinum SLI
2 500 gig sata

Ok overall solution this board works awesome with Windows Server 2003 Enterprise R2 with Sp 2.
Here are a few tricks for the Co processor controller, Sm Bus, Audio and finally the networking controller.
When you finally get windows loaded. Make sure you put Service Pack 2 or 3 on before u install drivers.
The raid drivers are simple for the 32 bit version use the xp ones and load both raid drivers during setup. Requires 2 floppys or Slipstream disk.
http://global.msi.com.tw/index.php?func=driverfile&dno=7067&i=2
Once you get windows loaded and Sp 2 or better on. Stick in your windows vista driver disk in. Once there do not install anything.
Goto device manager and update drivers on all that are with the yellow ? excpet the networking drivers and just do an automatic search and boom your done. It will also ask you if you want to enable your audio at this time. Do so but do not reboot untill u finish installing all drivers but networking. Than reboot pc
Last part is for networking card. We need you to be in safe mode for this. So once u install all drivers and start reboot hit F8 and goto safe mode. Once in safe mode take out vista driver disk and put in xp driver disk. Goto device manager and update driver on network controller and let it do an automatic search and it will installl it. It will say it needs to be rebooted to work. Go ahead and reboot and your networking card will work.
Probably simpliar solution. But just wanted to give my help.

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

Automatic updates maxing out CPU on windows server 2003

Similar Messages

Maybe you are looking for