Automatic Virtual Machine Activation failing on Server 2012 R2 with Update

Appears AVMA is now broken on new media with Update:
Trying to use the Key from:
http://technet.microsoft.com/en-us/library/dn303421.aspx
en_windows_server_2012_r2_with_update_x64_dvd_4065220.iso
Receive the message "We Couldn't Verify the product Key. Please check your installation Media
Works fine with
en_windows_server_2012_r2_x64_dvd_2707946.iso
I have downloaded the media more than once with same error. Do we need to update the AVMA Key?
Thanks

Hi JAM ,
Is the first ISO downloaded from MS official web site ?
If yes , please use command " slmgr /dlv "to check the server edition , if it is evaluation edition please refer to the following similar thread :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d6792f61-36aa-46d5-abc6-880cd1437da6/windows-server-2012-evaluation-activation-issue?forum=winserver8setup
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Migrating Virtual Machine - Error "Failed to Complete planned Virtual Machine at migration destination" - Server 2012 R2

So to get started I'll give a bit of background on the Infrastructure we are currently working with.
We have:
2 x Hyper-V Hosts (Currently 2 for testing migrations, this will increase once we have a working platform)
2 x File Servers acting as storage nodes for VHD Storage
1 x Physical DC
The Hyper-V Hosts both have Server 2012 R2 Datacentre installed, the rest have Server 2012 R2 Standard installed and configured.
We currently have some VM's sitting on one host and I am in the process of simulations to make sure live migration is working between the two HV Hosts (This is a non-clustered setup), Everything is on the domain and i've been using a domain admin account
to administer these servers for these simulations.
We plan on having VHD's stored on FS01 and FS02, basically our primary host is going to have all primary servers on and then those vhd's will be stored on FS01 and then all secondary/redundant servers are going to be on the second host and vhd's stored on
FS02 - Simple enough?
I can perform Data migrations between both FS01 and FS02 using the Hyper-V Management tool on both hosts without any issues. The issue I am currently encountering is when I perform a migration of the "Virtual Machine Only". Now, this simulation
works when the data for the VM is stored on either of the hosts using UNC pathway, no hiccups at all, I receive the below error when ever the data is stored on either FS01 or FS02 using again, UNC pathway (These VM's power on and work perfectly otherwise while
hosted on FS01/02).
Error:
I've researched this quite a lot and have gone through countless solutions other people are having.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/5780d041-4036-404e-9f33-8abe025bfe2b/hyperv-failed-to-create-external-configuration-store-general-access-denied-error-ox80070005?forum=winserverhyperv (Which
took me to the below link)
http://support2.microsoft.com/kb/2249906 (This solution didn't work, in fact i couldn't even get CMD to run the command)
Now, with
THIS SOLUTION that I attempted I worked with adding all the hosts and FS01 (because nothing is on FS02 at the moment) in an attempt to get the VM Migration only working between hosts and still receive the same error.
As a testing option, I Moved the Data for the VM back to one of the hosts using UNC pathway and then performed a live migration to the other host no problems, then performed a data migration back to FS01 and that also worked. I don't particularly want to
do this with production VM's as I have at least 6 x 780GB vhd's that need to be moved and this would move them more than once, obviously not ideal.
If someone is able to help me out, or at least point me in the right direction, that would be awesome!

I did try adding the 'Everyone' permission for the testing of migration to see if it was a permission issue which didn't help at all before I'd posted this article.
This ended up being a Computer Delegation issue, I'd neglected to add the 'cifs' (SMB Protocol) on ALL servers for ALL servers in the cluster, I didn't add that permission in my FS01 or FS02 servers for each other or the hyper-v servers that were in operation.
I've now started our production Hyper-V Servers and they haven't skipped a beat since adding in those delegations correctly to all servers as a "Full mesh" type setup.
Thanks for responding in any case :)
This is the permission I am referring to if anyone else has the issue:
AD>Computers>{Name of Computer}
I also performed an active directory replication forcefully with:
repadmin /replicate <Target> <Source> dc=Domain,dc=local
Run as a powershell command.

SPLA licensing for Virtual Machines & Microsoft Hyper-V Server 2012 R2 ( Free Edition )

How to report Virtual machines running on Microsoft Hyper-V Server 2012 R2 ( Free Edition ). Please see the below details.
I have Server with Xeon E5450 (1 Socket , 4 Cores & 4 Logical Processors)and running Microsoft Hyper-V Server 2012 R2( Free Edition) on it Now I have created some VPS with different config
including virtual processors. My question is how many licence i have to report and core os is free.
Akshay Pate

Hi Akshay Pate,
Hyper-V Server 2012 is a FREE (yes, completely free!) purpose-built product that includes the core of Windows Server 2012 and Hyper-V.
The result is a streamlined Type-1 hypervisor that is optimized for remote management and provides the same virtualization scalability and high availability features as the Hyper-V role in the full version of Windows Server - including up to 320 logical
processors per Hyper-V host, up to 4TB of physical memory, Live Migration, Storage Migration, Virtual Machine Replication, Clustering and more!
More detail information please refer the following article:
Building a Private Cloud VM Compute Foundation with the FREE Hyper-V Server 2012
http://blogs.technet.com/b/keithmayer/archive/2013/04/05/getting-started-with-hyper-v-server-2012-hyperv-virtualization-itpro.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WDS service will not start Windows Server 2012 R2 with Update

Greetings,
After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
Any suggestions? Am I missing a Win-PE boot Image? Should I do something else?
Please assist,
Bob Hessenauer

All,
The problem was a conflict between DHCP and WDS. Followed the instructions in this article and all is now fine:
https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
Just so you know,
Bob Hessenauer

Virtual Machine Export Failed

I am requesting help with a continuing problem I am having attempting to export a Hyper-V Virtual Machine to a shared drive internally installed on a Domain Server.
When I attempt the export, a few second later I received the following error message: “An error occurred while attempting to export the virtual machine. Failed to copy file during export. General access denied error
(0x80070005).”
I have spent numerous hours searching Blog Posts and Online forums for a definitive solution to this problem. The purposed online solutions that I have come across refer to
NTFS level permissions & share level permissions set at the drive share for the Hyper-V Computer account, the User account used, and System account. None have worked for me. Here is an example of such a post finding:
https://support.microsoft.com/en-us/kb/2008849.
I also tried the settings from a purposed solution for Hyper-V – General Access Denied Error message listed in this post here:
http://blog.mpecsinc.ca/2009/02/hyper-v-general-access-denied-error-for.html. No luck here also.
I have a small Microsoft 2008 R2 SP1 Server network that consists of 2 Domain Controllers, (one which serve as a Hyper-V Host). 4 virtual machines and a combination of wireless and PC based Windows 7 and Windows 8.1
clients.
The 1TB drive I’m attempting to move my virtual machines to is brand new, purchased five days ago. I reformatted this drive a couple times to see if that had any affect, none at all.
So, I’m reaching out for any other suggestions that I might try. Please, remember I have already tried and have in place the NTFS level permissions & share level permissions set at the drive share for the Hyper-V
Computer account, the User account used, and System account.
Your help with this problem will be very much appreciated.
Thank you,
Martiar

Also, you must export to a UNC path, not a mapped drive. And your Hyper-V Server must be a member of the domain (as that is what requires the read, write, and create permissions on the share), your user account needs to only read the path.
Also, the permissions must be right at both the share and NTFS levels.
Personally, why not add the drive to a Hyper-V Server and export locally? If you are trying to set up and SMB share for running VMs you have to use Hyper-V 2012 R2 and your File Server must be 2012 R2 as well.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Activation failed: CBS Server Error

Hi,
We have done the activation and transportation many times before. But now we hit this error when trying to activate:
Activation failed: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR).
At the WebGui -> CBS -> Activities, if we want to view or search any activities, we will see the error like this:
Communication Exception Occured. Contact System Administrator.
Any help would be much appreciated. Thanks.
- julius

Hi Julius,
This link should help you to check if the server is running and to check the CBS logs.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/40/372c7fd5ea984c894cb2bfe7472058/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/40/372c7fd5ea984c894cb2bfe7472058/frameset.htm</a>
You may go through Checking access to the Component Build Server and CBS Logging under the topic Configuring the component build server
Akshatha

Activation failed: CBS Server Error...Please help

Hello All,
I get this error while activating a DC/activity:
Activation failed: CBS Server Error: The user does not have the authorization for the requested operation( internal code: USR_MISSING_PRIVILEGE)
I have setup the required User Privileges as mentioned in help.sap site
Plus, I have also checked the NWDI.Developer role & it has all the foll actions, namely:
1. CBS.Developer
2. CBS.Display
3. CMS.Export
4. LcrInstanceWriterNR
Please guide...
Am working on EP7 SR2 (SPS 9) and am into NWDI.Developer group.
Please guide.
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hi Ritu
It is an authorisation error, not enough CBS rights,
please read http://help.sap.com/saphelp_nw04/helpdata/en/88/9959400d9d10
59e10000000a155106/frameset.htm for the configuration of the JDI UM.

IPAM Upgrade Failed - Windows Server 2012 R2

Why previous discussion was locked?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/324f812f-80b5-4822-aadc-cf92d9f11949/ipam-upgrade-failed-windows-server-2012-r2?forum=windowsserverpreview
IPAM Upgrade Failed - Windows Server 2012 R2
Hi All,
I'm experiencing some problems with the upgrade procedure of an IPAM service hosted on a Windows Server 2012 R2 instance which originally was deployed on a non-R2 version. I've recently done in-place upgrade of the W2K12 OS to W2K12R2 which went absolutely
fine, however when I'm trying to upgrade the IPAM service itself (from v6.2.0.1 to v6.3.0.1), I'm receiving an error message right after the database schema update procedure.
Received error message:
Failed to convert Schema. Please see the details.
The given key was not present in the dictionary.
Please restart the Wizard to update the IPAM server.
Tried to restart the wizard several times, but it ends up with the same result.
Also I noticed that the event log shows some authentication problems with the WID DB service:
Connecting to IPAM database failed with,
    Number: 18456
    ErrorCode: -2146232060
    Level: 14
    State: 1
    Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
    Database Type: WindowsInternalDatabase
    Database Authentication Type: WindowsAuthentication
    Database Name: IPAM
    Database Path: C:\Windows\System32\ipam\Database
    Database Server:
    Database Server Port: 0
    Username:
The original IPAM deployment was pretty much a standard one by the official MS guides so there were no custom actions applied at any point in time. Right now I can access neither the IPAM features nor the previously made inventory, because server manager wouldn't
let me do so until the upgrade is complete. For the time being this upgrade failure seems to be a bug.
Kindly ask you to help me out with this issue.
Thanks in advance.

Hi, event id 60002 in admin log:
Connecting to IPAM database failed with,
Number: 18456
ErrorCode: -2146232060
Level: 14
State: 1
Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
Database Type: WindowsInternalDatabase
Database Authentication Type: WindowsAuthentication
Database Name: IPAM
Database Path: C:\Windows\System32\ipam\Database
Database Server:
Database Server Port: 0
Username:
and event id 10459:
The IPAM database schema conversion from version 6.2.0.1 to version 6.3.0.1 failed with error: The given key was not present in the dictionary.. Your IPAM installation might not work properly.
10x

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Using SQL Server 2012 Express with Bitocker

Hello,
I'm currently working on getting our SQL Server Express database working with BitLocker but I am coming across a few problems. Here is my scenario:
The OS is partitioned into two volumes (C and D).
The C volume contains the OS and Software, while the D volume is primarily used for the database files (logs, back, and mdf).
The D volume is encrypted using BitLocker
The database connects using the SA account (SQL Server Authentication)
From what I understand, BitLocker must be enabled with the same account that the SQL Server is running on. So what I have done is change the SQL Server service account to the user account (lets say its called User) via SQL Configuration Manager. While staying
logged into User account, I then enable BitLocker via Control Panel -> System and Security -> BitLocker Drive Encryption. I then reboot and then while the software is trying to connect to the database I get the following exception:
'login failed for user sa'.
Is there anything I need to do to get this working? Thanks for the help.

Hi moncadad,
When you turn off BitLocker, does the database also show “Recovery Pending”? If so, the simplest cause for “Recovery Pending” might be that a disk spin-up was slow, or a disk became full. Please read this
blog to fix the issue, then check if you can successfully connect to the database after you turn on BitLocker.
However, if you are not able to view the database contents only after you turn on BitLocker, I suspect that there are some issues about configuring BitLocker. As far as I know, Bitlocker must be performed by a member of Local Admins Group, please make sure
that your account is a member of Local Admins Group on your computer.
Also I would like to recommend you post the question in the
Microsoft Bitlocker Administration and Monitoring (MBAM) forum to get better support. For more details about configuring SQL Server with Bitlocker, please review the following similar articles.
Using SQL Server 2012 Standard with Bitlocker
How can I retrieve my BitLocker recovery key from MBAM in Windows PE
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

Windows Update fails on Server 2012 R2 Virtual Machine

I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain. The DC (TestVM1) is also set up as a DNS server.
From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
The Windows Update client shows "Error(s) found:" and "Code 8024402F".
Errors in WindowsUpdate.log include
2014-10-17 18:26:14:235 800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send failed with hr = 80072ee7.
2014-10-17 18:26:26:238 800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send request failed, hr:0x80072ee7
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: Failed to download cab file from
http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
2014-10-17 18:26:26:317 800 950 PT + SyncUpdates round trips: 1
2014-10-17 18:26:26:317 800 950 PT WARNING: Sync of Updates: 0x8024402f
2014-10-17 18:26:26:317 800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-17 18:26:26:317 800 950 Agent * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-17 18:26:26:317 800 950 Agent * WARNING: Exit code = 0x8024402F
This is blocking further work. Assistance would be greatly appreciated.

I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time. Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
that as a test and got the same error message. I also tried to stop wuauserv and cleaning out the folder and starting it back up. No joy as well. This is a VM server running on ESXi 5.1. Server 2008 servers dont seem to have
an issue. Server 2012 server don't seem to have an issue. Only this new Server 2012 R2 server. My logs are below:
2014-10-28 14:28:46:104 696 4a4 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-28 14:28:46:104 696 4a4 WuTask Uninit WU Task Manager
2014-10-28 14:28:46:198 696 4a4 Service *********
2014-10-28 14:28:46:198 696 4a4 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-28 14:28:46:198 696 4a4 Service *************
2014-10-28 14:29:24:198 696 5c8 Misc =========== Logging initialized (build: 7.9.9600.17092, tz: -0400) ===========
2014-10-28 14:29:24:198 696 5c8 Misc = Process: C:\Windows\system32\svchost.exe
2014-10-28 14:29:24:198 696 5c8 Misc = Module: c:\windows\system32\wuaueng.dll
2014-10-28 14:29:24:198 696 5c8 Service *************
2014-10-28 14:29:24:198 696 5c8 Service ** START ** Service: Service startup
2014-10-28 14:29:24:198 696 5c8 Service *********
2014-10-28 14:29:24:214 696 5c8 Agent * WU client version 7.9.9600.17092
2014-10-28 14:29:24:214 696 5c8 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-10-28 14:29:24:214 696 5c8 Agent * Access type: No proxy
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Agent * Network state: Connected
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-28 14:29:24:542 696 5c8 DtaStor Data store successfully created
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing global settings cache ***********
2014-10-28 14:29:24:542 696 5c8 Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-28 14:29:24:542 696 5c8 Agent * WSUS server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent * WSUS status server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent * Target group: (Unassigned Computers)
2014-10-28 14:29:24:542 696 5c8 Agent * Windows Update access disabled: No
2014-10-28 14:29:24:542 696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-28 14:29:24:542 696 5c8 WuTask WuTaskManager delay initialize completed successfully..
2014-10-28 14:29:24:542 696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
2014-10-28 14:29:24:542 696 5c8 Report CWERReporter::Init succeeded
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-28 14:29:24:542 696 5c8 DnldMgr Download manager restoring 0 downloads
2014-10-28 14:29:24:557 696 5c8 AU ########### AU: Initializing Automatic Updates ###########
2014-10-28 14:29:24:557 696 5c8 AU AIR Mode is disabled
2014-10-28 14:29:24:557 696 5c8 AU # AU disabled through User preference
2014-10-28 14:29:24:557 696 5c8 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-28 14:29:24:557 696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-28 14:29:24:557 696 5c8 AU AU finished delayed initialization
2014-10-28 14:29:24:557 696 234 DnldMgr Asking handlers to reconcile their sandboxes
2014-10-28 14:29:35:776 696 578 IdleTmr Incremented idle timer priority operation counter to 1
2014-10-28 14:29:37:307 696 52c AU Triggering AU detection through DetectNow API
2014-10-28 14:29:37:307 696 52c AU Triggering Online detection (interactive)
2014-10-28 14:29:37:323 696 5c8 AU #############
2014-10-28 14:29:37:323 696 5c8 AU ## START ## AU: Search for updates
2014-10-28 14:29:37:323 696 5c8 AU #########
2014-10-28 14:29:37:323 696 5c8 SLS Retrieving SLS response from server...
2014-10-28 14:29:37:323 696 5c8 SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
2014-10-28 14:29:58:339 696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
2014-10-28 14:29:58:339 696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
2014-10-28 14:29:58:385 696 5c8 Report *********** Report: Initializing static reporting data ***********
2014-10-28 14:29:58:385 696 5c8 Report * OS Version = 6.3.9600.0.0.196880
2014-10-28 14:29:58:385 696 5c8 Report * OS Product Type = 0x00000007
2014-10-28 14:29:58:401 696 5c8 Report * Computer Brand = VMware, Inc.
2014-10-28 14:29:58:401 696 5c8 Report * Computer Model = VMware Virtual Platform
2014-10-28 14:29:58:401 696 5c8 Report * Platform Role = 1
2014-10-28 14:29:58:401 696 5c8 Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-28 14:29:58:401 696 5c8 Report * Bios Revision = 6.00
2014-10-28 14:29:58:401 696 5c8 Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-10-28 14:29:58:401 696 5c8 Report * Bios Release Date = 2013-08-16T00:00:00
2014-10-28 14:29:58:401 696 5c8 Report * Bios Sku Number unavailable.
2014-10-28 14:29:58:401 696 5c8 Report * Bios Vendor = Phoenix Technologies LTD
2014-10-28 14:29:58:401 696 5c8 Report * Bios Family unavailable.
2014-10-28 14:29:58:401 696 5c8 Report * Bios Major Release = 4
2014-10-28 14:29:58:401 696 5c8 Report * Bios Minor Release = 6
2014-10-28 14:29:58:401 696 5c8 Report * Locale ID = 1033
2014-10-28 14:29:58:401 696 5c8 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:401 696 5c8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:29:58:432 696 b0c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *************
2014-10-28 14:29:58:432 696 b0c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *********
2014-10-28 14:29:58:432 696 b0c Agent * Online = Yes; Ignore download priority = No
2014-10-28 14:29:58:432 696 b0c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-28 14:29:58:432 696 b0c Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2014-10-28 14:29:58:432 696 b0c Agent * Search Scope = {Machine & All Users}
2014-10-28 14:29:58:432 696 b0c Agent * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
2014-10-28 14:29:58:432 696 b0c SLS Retrieving SLS response from server...
2014-10-28 14:29:58:432 696 b0c SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-10-28 14:29:59:135 696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-10-28 14:29:59:135 696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-10-28 14:29:59:135 696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-28 14:29:59:135 696 b0c Setup Checking for agent SelfUpdate
2014-10-28 14:29:59:135 696 b0c Setup Client version: Core: 7.9.9600.17092 Aux: 7.9.9600.17031
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-10-28 14:30:00:151 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:151 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
2014-10-28 14:30:00:167 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:167 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:167 696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-28 14:30:00:167 696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-10-28 14:30:00:167 696 b0c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-10-28 14:30:00:323 696 b0c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-28 14:30:00:323 696 b0c PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2014-10-28 14:30:01:104 696 b0c PT WARNING: Cached cookie has expired or new PID is available
2014-10-28 14:30:01:104 696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-28 14:30:01:198 696 b0c Agent Reading cached app categories using lifetime 604800 seconds
2014-10-28 14:30:01:198 696 b0c Agent Read 1 cached app categories
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
2014-10-28 14:30:41:151 696 b0c PT + SyncUpdates round trips: 14
2014-10-28 14:30:41:151 696 b0c PT WARNING: Sync of Updates: 0x8024402f
2014-10-28 14:30:41:151 696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-28 14:30:41:151 696 b0c Agent * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent * WARNING: Exit code = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent *********
2014-10-28 14:30:41:151 696 b0c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:30:41:151 696 b0c Agent *************
2014-10-28 14:30:41:151 696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
2014-10-28 14:30:41:151 696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented PDC RefCount for Network to 0
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented idle timer priority operation counter to 1
2014-10-28 14:30:41:151 696 6fc AU >>## RESUMED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU # WARNING: Search callback failed, result = 0x8024402F
2014-10-28 14:30:41:151 696 6fc AU #########
2014-10-28 14:30:41:151 696 6fc AU ## END ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU #############
2014-10-28 14:30:41:151 696 6fc AU All AU searches complete.
2014-10-28 14:30:41:151 696 6fc AU # WARNING: Failed to find updates with error code 8024402f
Derek
Systems Engineer
Derek Desktop Engineer

Move Virtual Machine from Hyper-V Server 2008 R2 SP1 to Hyper-V Server 2012 fails with Error 2901

I have six Hyper-V 2008 R2 SP1 servers and two Hyper-V 2012 servers. I am running SCVMM 2012 SP1. I am trying to use "move virtual machine" from within SCVMM to move VMs from a 2008 host to a 2012 host. I have tried different VMs on different hosts
and they all fail with this error:
==========
Error (2901)
The operation did not complete successfully because of a parameter or call sequence that is not valid.
The parameter is incorrect (0x80070057)
Recommended Action
Ensure that the parameters are valid, and then try the operation again.
==========
I have successfully created a VM on one of the 2012 hosts and moved it to the other 2012 hosts. I can move VMs from 2008 host to 2008 host. I just cannot move VMs from 2008 host to 2012 host.
Does SCVMM 2012 SP1 not support moving VMs from Hyper-V 2008 to Hyper-V 2012?

Hello Kevin,
Have you got an resolution yet ? Do you have latest update roll up pack applied to SCVMM 2012 SP1?
With SCVMM 2012 SP1 " Running VMs (Live Migartion) and VMs which are in Saved state or having checkpoints can not be migrated from 2008R2 host to 2012 Host "
above was fixed in SCVMM 2012 Update Roll up 1
Apart this please check the approx. size of data (VHDs) which will get transferred over the network , If you have large files chances are more to get such errors.
Thanks
~NY

Do i need another Virtual machine rather than sharepoint server to install workflow manager ?

Hi ,
I have installed sharepoint 2013 on a single server with a built-in-database. And i have installed OWA in another virtual machine. Now i am trying to create a workflow. I have downloaded and installed sharepoint designer and workflow
manager in the sharepoint 2013 itself. Do i need to install workflow manager in another server and make it to communicate with sharepoint server ? And how to email-id in workflow when i tried in sharepoint designer we have select the user. How to allocate
e-mail id for users ?

Creating new VM is choice of your architecture. Workflow Manager only requires below.
Workflow Manager 1.0. Email ID will be automatically picked from the participants from AD.
.NET Framework 4 Platform Update 3 or .NET Framework 4.5
Service Bus 1.0
Workflow Client 1.0
PowerShell 3.0
The following additional requirements must be met before you can run Configuration Wizard to configure Workflow:
Instance of SQL Server 2008 R2 SP1, SQL Server Express 2008 R2 SP1, or SQL Server 2012.
TCP/IP connections or named pipes must be configured in SQL Server.
Windows Firewall must be enabled.
Ports 12290 and 12291 must be available.
Bala

Automatic Virtual Machine Activation failing on Server 2012 R2 with Update

Similar Messages

Maybe you are looking for