Automatic vs Custom tabbing

Hi,
We're currently uploading forms to a third party vendor.  A form's tabbing can be customized to a particular order which works fine when viewed in Adobe.
However it does not retain the tabbing order when the form is uploaded; it seems to regress to the "Automatic" setting.  So, my first question is can I attach the order to the form so that uploading the form retains its customised order?
I've tried to alter textbox coordinates so that one control is "higher" or the same as another.  This works if the order goes from left to right.  However, I have a form where the order travels vertically through one column.  When it reaches the bottom, the next location is the top of the next column and that's where I have a problem.  I hope this makes sense.
Does anyone know how I can do this?
Paul

Paul,
When you say 'open', did you open it in some viewing version of Adobe?  If so then yes that does work.  My problem is I don't have my order maintained in our third party vendor.
We are in dialogue with them but don't have the answer yet.
Apart from setting the tab order using 'Automatic' and setting the order as my controls are placed, I don't know what else I can do.  And that only gives me an order of L to R.
thanks,
Paul

Similar Messages

  • Change the name of custom tab in me51n / me52n / me53n

    Hi,
    I have to add a few custom fields in PR item of  transactions me51n / me52n / me53n. I have used the enhancement MEREQ001 for adding the custom fields. The sytem automatically creates a custom tab with the name Customer Tab for the additional fields that I have added using the enhancement MEREQ001 while displaying in me51n / me52n / me53n.
    Now I have a requirement to change the name of the custom tab created for transactions me51n / me52n / me53n from Customer Data to Others.
    Can anyone suggest me how to go about doing this???
    Thanks in advance.
    Abhisek.
    P.S.:- Points will be be duly awarded 4 helpfull answers.

    Hi,
    I tried doing whatever you had suggested but it seems that it is not working.
    Could you suggest some other way to do this?
    Thanks and regards.
    Abhisek.

  • How to hide custom tab in crmd_order

    hello gurus,
    In crm how to hide a custom tab (which is created through EEWB Transaction )for particular order types??
    ex: if a tab named ADDITIONAL DATA B is holding the info like contact name ,customer PO etc.,here my requirement is to hide that tab for some order types like CR & DR.
    Plz help me out in this issue..
    Bye--
    Pradeepa

    Hello Pradeepa,
    2 options to replicate the custom data to R/3:
    A- via EEWB, flag the 'R/3' flag
    extract from doc:
    Field Relevant for R/3 Execution?
    Specifies whether you use CRM Sales with R/3 Supply Chain Execution, and whether you wish to transfer the field to the R/3 System.
    Use
    If you set this flag, the system generates a BAdI implementation that transfers the field to R/3 BAPI structures. If your executing system is an R/3 Enterprise System, the system enhances the BAPI structures and tables for sales orders in the R/3 System so that the field is transferred automatically to the R/3 sales order.
    So, with this flag, during generation, the whole flow to R/3 and also the fields in the tables in R/3 are created.
    B- write your own integration flow via exits/badi in the middleware to integrate the fields into existing fields in R/3 tables.
    Regards,
    Fred

  • PSCD custom Tabs u2013 need to hide a Tab on the CAA1, CAA2, CAA3 transactions

    We are using Business Data Toolset (BDT) (transaction CAWM) for these changes.
    We are using PSCD for one department and created a Tab for the custom data screens and it works just fine.
    Now we need to setup a 2nd department to use PSCD and we want to create a 2nd Tab for the custom data screens for this department. This I have been able to do.
    However we want the department to see only their custom Tab Not the other departments. I have not been able to figure out how to hide a Tab.
    I can not find any documentation on how to do this.
    Is it even possible?

    Your idea sounds do-able.
    For any FP object that you want to extend, you would create a "Shortcut Menu Activation?" Event. Within the event, you can retrieve a MenuRef.
    Using the Menu Palette, you use the Insert Menu Items function, each item has a displayed name and a tag.
    You then add a Shortcut Menu Selection (User) Event for the FP object to handle the selection made by the user. The ItemTags that you assign in the are available to use as a case selector. Your example would simply set the Tab control's index value to switch to the panel you want.
    I built a fancy tree control (as an XControl) a few years ago for an internal tool that presented a view of files on disk and the right-click menu was context sensitive the the extension of the filename selected. Look in the Facade and the FileView Set Context Menu.vi for the guts of what I did.
    I always deleted the tree menu choices and then added my own. If you don't delete the items, then your options are appended to the end.
    I've attached the files here as a ZIP. (LV8.6)
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness
    Attachments:
    LV 8.6 Upgrade Tool.zip ‏745 KB

  • Facing Problems in screen navigation after adding a New custom tab to MM03

    Hi,
    I have added a new custom tab to MM03 transaction by using SPRO.This new tab is appearing in between Basic data 2 tab and Classification tab in MM03.In my new tab i have 4 sub screens and the Last sub screen has table control.Now the problem is when i slide the vertical bar in my table control it is automatically triggering the Classification screen.
    For preparing the New tab in SPRO ->SAP Reference IMG  ->Logistics-General->Material Master->Configuring the material master ->Define structure of data screen for each screen sequence ->
    Here i have created a new screen sequence 'Z5' by copying the already existing sequence '21'.Inside this new screen sequence i have created a new screen of mine by copying the already existing screen '4004'. 
    For maintaining the screen sequence i.e., to place the new tab between Basic data2 and Classification tab go to SPRO ->SAP Reference IMG  ->Logistics-General->Material Master->Configuring the material master ->Maintain order of main and additional screens.I have changed the order of main screen sequence to make our new tab the third tab.
    To make this new tab visible only for MM03 transaction i have gone to SPRO ->SAP Reference IMG  ->Logistics-General->Material Master->Configuring the material master ->Assign screen sequence to User/Material Type/Transaction/Industry sector.In this in the Transaction screen reference, I have changed the screen reference number for MM03 and i have include this new screen reference entry in the screen sequence control column.
    To create the sub screens required i have gone to  SPRO ->SAP Reference IMG  ->Logistics-General->Material Master->Configuring the material master ->Create Program for customized sub screens and have copied the standard Function group MGD1 and created 4 sub screens.
    Now to place these 4 sub screens in the order required for us i have once again gone to SPRO ->SAP Reference IMG  ->Logistics-General->Material Master->Configuring the material master ->Define structure of data screen for each screen sequence and i have selected the new screen sequence created 'Z5' created by me.Inside that i have selected the screen created by me '4004'. Now i have double clicked the Sub screen options and here i gave the sub screens numbers created by me replacing the standard sub screens. 
    Then I activated by custom function group and i started testing the MM03 transaction.
    My screen was getting populated properly and the tab movement is also fine but only problem was when i slide the table control in the fourth sub screen of my new tab i am going to fourth screen (classification).
    Can you please help me by suggesting what the problem may be, why this issue in navigation.

    Hi ,
    I have the same problem now ...
    Did you solved it?
    Thanks a lot!
    Regards,
    Hancila

  • Call Control from Custom tab

    Is it possible to control the call from a custom tab, such as automatically conference a supervisor, voice mail, etc.... ?

    Hi Mithun,
    I dont think u have got the issue,
    I have a transaction varient for the std transaction. This varient is for the users who do not have access to the std transaction.
    Usually when we do a save to the custom Tcode we go back to the main screen of the transaction varient, but here it is going to the main screen of the original transaction. i want the control to go to the transaction varient.

  • Customizing Tab Images

    I am trying to create my very first spry tabbed panel. I have
    a 5 tab horizontal panel. Instead of plain text on a colored
    background, I would like to have customized tabs with the text
    already on them, along with a "on mouseover" version. I am actually
    using it as part of my navigation.
    My CSS skills are still young, but in studying the
    sprytabbedpanels.css that dreamweaver automatically created, it
    appears that there are about 9 class properties all starting with
    .tabbedpanels. By looking at the names, I am guessing it's similar
    to configuring a hyperlink where you set a class for up, over,
    down, and overwhiledown ???
    It seems to be an all or nothing, so am I correct in assuming
    that if I want to have each of my tabs to be "unique" that I need
    to create 4 more "sets" of these classes? Are there just specific
    ones that I would need? I am sure there is one that controls
    "Everything to make the panel work as a whole and I don't want to
    screw it up :) (Also, if I have to create additional sets, does the
    order matter?)
    I can't find anything online or in my dreamweaver bible to
    help me make heads or tails. Any help or insight would be most
    appreciated.
    Bonnie

    Hi Bonnie,
    to create an unique layout for each tab panel, you should add
    the css properties directly on the tabs from your page.
    Define in your page a class for each tab, like: .tab1,
    .tab2... and add to them the custom layout.
    .tab1{
    background-image("iamges/img_tab1.jpg")'
    Call these css classes for each tab like:
    <li class="TabbedPanelsTab tab1" tabindex="0" >Tab
    1</li>
    Diana

  • Error message does not lead to the custom tab me51n

    Hi Experts,
    When I try to to create a PR in me51n and check, a popup with error messges appear when we pick one of the entry and select edit button that leads to the field of that concerned tab.I have a custom tab and cutom field the issue is error message is displayed to fill the custom field but when I check mark that error and select edit that does not take me to the custom tab where custom field exists please suggest I have tried lot of user exits but no use.
    appreciate your help......

    We added some error message checking using Function exit EXIT_SAPLMEREQ_005. How we can bring the screen to Customer Data Tab when there are any errors under the tab. And as long as the error is not fixed, the screen will stay on the tab?
    To eloborate my question - in ME51n/Me52n, the system gives a messages window/subscreen with errors or warnings upon clicking the check button or upon save. On the messages window/subscreen, we can select a particular message and edit will take action to the corresponding tab with the cursor on the field with the issue. I understand this is standard functionality.
    However I'm looking for a way to make this work for a mandatory field on the customer data tab i.e., when I select the error message pertaining to this mandatory field and choose edit, control should jump to the customer data tab with the cursor on the mandatory field.

  • Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

    Hello all,
    I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
    We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
    Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields. 
    So, my question is how do I handle line selection in the context of these BAdIs?  Is there a way to know which lines have been selected and then only change the data in those items?
    I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet. 
    I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N.  However, I haven't found a way to work with it.  It doesn't get passed to any of the methods in the BAdIs, as far as I know. 
    January 27, 2012  **************
    We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI.  The lines are in the lt_models table. 
    So, now my issue is getting data to save in ME22N.  When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save.  It does work when I make a change in another field, like changing the description for instance.  I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work. 
    I'm getting the idea that I'm the first ABAP developer to try this...
    Thanks for any help.
    Kind Regards,
    Chris
    Edited by: Chris  Mowl on Jan 11, 2012 10:33 AM
    Edited by: Chris  Mowl on Jan 11, 2012 4:24 PM
    Edited by: Chris  Mowl on Jan 27, 2012 10:57 AM
    Edited by: Chris  Mowl on Jan 27, 2012 2:00 PM

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

    Hi Friends,
    I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
    Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
    For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
    But i want how to add custom tab in which item details were to be attached.
    i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
    And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
    can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
    Thanks a lot in advance.
    Thanks
    Ravi.
    can any one give the solution regarding to the above one.
    Edited by: ravikanth on Jul 23, 2008 8:13 AM

    Hello Priyanka,
    I have the same problem by using Service Ticket in SAP CRM 5.0.
    Did you already solved this issue? If so, can you please provide the solution!?
    How can I activate and check the transfer log?
    Thanks and regards
    Alex

  • Need to add extra fields in Custom tab  using EEWB.

    hi ,
    I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
    Now when I am creating new project  i am loosing the old field names. It creating the new fields with new field names.
    My requirement is I should create a new fields without changing the old field names.
    So Please can any one help me as how to approach these without deletion or changing the existing field names.
    Finally my custom tab should contain 12 fields.
    Thanks
    viswa

    Hi viswa,
    I have a requirement to add 2 new fields to the Standard Transaction (called <b>BP</b> ).
    I have gone through various concepts like <b>EEWB and BDT</b> tools. But, still I am not able to get the things well.
    So please provide me with the procedure to explore things and work on the requirement.
    Thanks in advance.
    Regards,
    Vishnu.

  • Hiding a customized tab (from header and item) in ME21N, ME22N and ME23N

    Hi SAP gurus,
    I need to make invisible a customized tab in Po creation(me21n), change(me22n) and display(me23n) in enjoySAP transaction for a particulat Doucument type.
    Please let me know the possibility and the solution to implement.
    Thanks,
    Kishore P

    Hi Kishore,
    The customized tab cannot be made visible or invisible conditionally. Instead you can write some text inside the tab to distinguish between different document types.
    Hope this helps.
    Regards,
    Abhijeet Kapgate

  • How to display success message when data is changed in the custom tab in MM

    Hi,
    I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
    But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
    Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
    Thanks in advance,
    sudhanva

    Hi Sudhanva,
    The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
    But the message issued by SAP is not related to this Function Exit.
    If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will  not issue the message.
    In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
    I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
    Hope this helps.
    Regards,
    Abhisek.

  • How to handle a custom tab in PCUI??

    Hi everyone...
    I have added a custom tab for the standard pcui opportunity application. If i click on that custom tab I want a new view or page to be dispalyed. Can anyone please let me know how to get this done or how to configure this.
    This is a bit urgent.
    Thanks and Regards,
    Bhargava

    Hello,
    you can find details about what Shailaja Gandam  described in my Blog:
    <a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url CRM PCUI HTML viewer to call a custom URL</a>.
    Regards
    Gregor

  • Custom tab is replacing excise invoice tab in migo

    Hi all,
    I have developed BADI for  MB_MIGO_BADI to add tab strip in migo ,
    when i execute transaction tab is showing correctly ,But problem is when i enter purchase document number
    Excise invoice tab is replacing my customized tab and while displaying data only customized tab only appearing
    in window Excise invoice tab tab is not displaying .
    i need to display boat tabs how can it possible.
    Can any one help me out of this problem...
    method IF_EX_MB_MIGO_BADI~PBO_HEADER.
        e_cprog   = 'ZMIGO1'.           
        e_dynnr   = '8999'.                     "External fields: Input
        e_heading = 'Gate entry detail'(004).
    endmethod.

    Hi,
    Try with gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'.
    Thanks,
    Shailaja Ainala.

Maybe you are looking for