Automatic Wireless Printer Setup

We're preparing to deploy quite a few LaserJet 600 M601 printers with wireless capability. They are going into courtooms with wireless access points for use by our attorneys. We'd love to have the attorney's wireless systems 'automagically' connect to the printers when they are in the vicinity without having to walk through a connection wizard for each courtroom they go to. I've heard that Dell has some sort of 'proximity' software that enables this sort of thing. Is this science fiction or is there a way to do this with the LaserJet 600 M601 printers?

SandyWood,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Photosmart C6280 Wireless Printing setup on a new Windows 7 - 32 bit machine..

I am able to print wireless with Windows XP machines in my home office on the Photosmart C6280 all-in-one printer. I have installed all of the Windows 7 - 32 bit drivers from hp.com. I have connected the printer and printed successfully through a USB cable with my new machine. I am able to see the wireless printer that I would like to select. However, I am unable to connect to it and print with like I was when it was USB connected.
I receive the following message when trying to select the printer I would like to select ....
"Windows cannot connect to the printer. Access is denied."
Any thoughts or suggestions ??

I have a notebook with Windows 7 and have successfully installed this printer via USB.
I also wish to use it wirelessly as I did with Vista and have gone to Devices nad Printers in the Control Panel to Add the printer wirelessly,
It finds the printer at 192.168.1.2 and installs ok.
When I ping 192.168.1.2 it replies ok
However, when I send a print to it wirelessly it keep giving me an error.
I tried turning off the firewall to no effect.
When I go into the Printer Properties it shows the port as being 192.168.1.2 and is set to Raw.
Please advise what is wrong here.

Any help with a wireless printer setup?

I recently got a Dell, and an wireless printer with it. The set-up seems pretty straight forward, but I get to the point where on my printer's screen, it gives me a PIN number I am supposed to enter on the WPS page. Problem is, I can't find anywhere on the WPS page where I can enter this number... is there an easy way to simply add another device?
THanks in advance!
-Matt
Solved!
Go to Solution.

Ok.
Which guide does your router look like..
#1 http://www.portforward.com/english/routers/wireless/Actiontec/GT704-WG/wireless.htm
#2 http://www.portforward.com/english/routers/port_forwarding/Actiontec/1020/1st_SMTP_Server.htm
#3 http://www.portforward.com/english/routers/port_forwarding/Actiontec/GT704-WGv2/1st_SMTP_Server.htm
#4 http://www.portforward.com/english/routers/port_forwarding/Actiontec/GT724R/1st_SMTP_Server.htm
#5 http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/1st_SMTP_Server.htm
#6 http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WRv2/1st_SMTP_Server.htm
#7 None of those.
At this time: Please only look at the screens/guides, do not adjust any wireless (OR port forwarding) settings.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Canon Wireless Printer Setup on MacBook Air without Super Drive access

I just bought a Canon Pixma MX 920 Printer and can't figure out how to install the wireless setup and the printer drivers without using the startup CD as I don't have access to a Super Drive. I have a 3 month old Mac Air using Mountain Lion and I'm also trying to set this up on an older Mac Air. The Canon website has been no help at all. I'm installing this for a family member while visiting from out of state so I'd like to do this before I leave Monday. Suggestions?

You can download Apple's drivers:
Apple Canon Laser Printer Drivers 2.0
Apple Canon Printer Drivers 2.11
You can also go to Canon's support site to locate and download drivers for specific printers.

HP - Officejet 100 Wireless Printer Setup with Chromebook

I am considering on purchasing this printer to use in my dorm. I have an HP Chromebook 14 and wanted to know how to connect it to the printer. Does it just work with bluetooth straight out of the box after I insert my wifi settings? DO i just turn on Bluetooth and send the files? I don't have a desktop to install the driver, like most normal printers would require, so I am relying on Google Cloud Print and Bluetooth printing. There is no way to install a driver on my Chomebook because that is not how the are made to work. Is there any other way to set it up without have to install any drivers? Or will it just work once I connect it to either wifi or Bluetooth? Any help is helpful.

Hi,
Your printer isn't web enabled so may may not be able to setup google cloud print via blue tooth.
There is a HP 1200w NFC/ Wireless Mobile Print accessory for your OJ100 mobile printer to enable it to support wifi printing:
Here's the link that shows how to set up your OJ100 with the HP 1200w:
Here's a link on how to setup google couldprint for your non e-print enabled printer:
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Two IP address with a wireless printer setup?

I installed my home printer (HP OfficeJet Pro 8000-wireless) on my work laptop. Works great UNTIL I login to the company website. The company support says it is because the laptop is assigned another IP address when you login in remotely. Is there any way to tell the printer this so I can printer both connected to the company and standalone?

Ok.
Which guide does your router look like..
#1 http://www.portforward.com/english/routers/wireless/Actiontec/GT704-WG/wireless.htm
#2 http://www.portforward.com/english/routers/port_forwarding/Actiontec/1020/1st_SMTP_Server.htm
#3 http://www.portforward.com/english/routers/port_forwarding/Actiontec/GT704-WGv2/1st_SMTP_Server.htm
#4 http://www.portforward.com/english/routers/port_forwarding/Actiontec/GT724R/1st_SMTP_Server.htm
#5 http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/1st_SMTP_Server.htm
#6 http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WRv2/1st_SMTP_Server.htm
#7 None of those.
At this time: Please only look at the screens/guides, do not adjust any wireless (OR port forwarding) settings.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Changed Router - Can't Setup Wireless printing

I recently changed my internet router. i did have my printer setup with wireless printing, now i cant connect to the new router.

Hi , Welcome to the HP Support Forums! I see you have recently replaced your Router and now you are unable to print wirelessly to your HP Deskjet 3052A from your Mac running the Mavericks 10.9 Operating system. I would like you to go ahead and start here: Wireless Printer Setup (OS X) Because you have a new Router, you will need to connect the Printer to your new wireless network. I hope this helps, let me know the outcome. Thanks,

HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway

I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway. My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely & automatically connected to the NVG510 Wireless Network without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway. My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever; However, the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail. I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software. I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the experts in this Forum. to get the printer to work wirelessly, since we also wirelessly print to this printer from IPads and other wireless laptops.

Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

How to I get my printer setup

How do I get my wireless printer setup to my iPad?

Take a look at this link, http://support.apple.com/kb/HT4356

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

My new Canon Pixma 7250 wireless printer can no longer find my wireless network. My MAC is, Yosemite 10.10.2. I've run diagnostics and Canon LAN printer setup routine many time. Is there a solution? Can anyone help?

My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

HP DeskJet 712c Driver and Wireless Print Server Setup

I have recently purchased a MacBook Pro and am unable to setup my printer to print. Previous to using the MacBook Pro I was using a windows machine without any trouble printing to this printer, however now I can't locate the printer on a list of pre-installed drivers for Mac. I've already checked HP's website and was unable to find any drivers that were for Mac OS. What is a good alternative driver source? Once I do get the driver what would my next steps need to be to set up the wireless print server to work with my mac?
Printer: HP DeskJet 712c
Wireless Print Server: D-Link DP-311P
I would be grateful for guidance to go about this process so that I can use my printer again.
MacBook Pro 2.16GHz Mac OS X (10.4.6)

HP-provided drivers don't support network printing. You'll need to install Foomatic (a PPD interpreter), ESP ghostscript (postscript translator) and the 712c PPD from:
http://www.linuxprinting.org/macosx/foomatic/
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet712C
Then, since we don't have the auto-setup software for OS X, you need to review the print server manual and find out which IP printing protocol to use. The easiest is HP Jetdirect (called TCP/IP raw port printing in many manuals) if it's available, because it doesn't require the device queue name.
Good luck.

I have a hp deskjet 3050 all-in-one printer how can i setup for wireless printing my os is windows7.

how do i setup my hp deskjet 3050 all-in-one printer for wireless printing my operating system is windows7

Unplug the USB cable. Now go to Start > All Programs > Hewlett-Packard > Deskjet 3050 > Add a Device. Run the program and choose Wireless as the installation type.
Follow the directions. It will ask you to connect a USB cable temporarily. Do not connect until it asks and remove it when it tells you.
Finally, when you are done, go to Control Panel > Devices & Printers and delete the USB instance of the printer so you don't get confused when printing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to setup a wireless printer

I was wandering if anyone out there knows how to setup a wireless printer without spending a lot of money. I have a dell photo 962 printer and a wrt54g router. I have tried to setup the printer on my laptop but it will not let me do so unless I connect it directly to the printer. My computers are running windows xp. Thanks for your help.

well for that you need to setup a printer as network printer, if your printer have networking capabilities...if not then you need to buy print server...

Wireless printer is setup, but the HP Installer Setup program is in a never-ending loop

Wireless printer is setup (HP Officejet 4500), but the HP Installer Setup program is in a never-ending loop. It says "Fatal error during installation." and keeps trying to uninstall/reinstall/ etc etc etc. Printer is setup and runs fine, just need to get rid of this crazy loop - any guidance?
Dee
This question was solved.
View Solution.

Which OS is installed?
I recommend that you uninstall the printer software from the HP folder in start-->All Programs -->HP --> uninstall software
After the uninstall is completed and your system restarted install and configure the printer again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Automatic Wireless Printer Setup

Similar Messages

Maybe you are looking for