Automatic Workload Repository Snapshots stopped ! How to restart

Hello,
On a 10.1 database when I try to create a ADDM report (Database: DBNAME > Advisor Central > Create ADDM Task ) I get a warning the following Warning :
Insufficient Data in Interval. For displaying data on this page, two historical snapshots are needed. Make sure that two snapshots are present in the target database instance. In addition modify the interval so that it is contained within two available snapshots.
if I check the AWR snapshots (Database: DBNAME > Automatic Workload Repository > Snapshots
)I notice that I have no more snapshot since few days.
I have search how to start again the Automatic Workload Repository Snapshots, but I did not found how to do it.
Some body can help to restart the AWR snapshots.
Thanks in advance !!!
Best regards
Gaspard Amiet

Hello Chandra,
Select snap_interval from dba_hist_wr_control; Return : +00 00:10:00.000000
Before It was to 1 hour and I change to 10 minutes.
statistics_level=TYPICAL, that is the default I think.
One more point, on this database the AWR snapshot work well before.
Best regards
Gaspard

Similar Messages

Problem Automatic Workload Repository after upgrage to 10.1.0.4.0

Hello everybody,
We upgraded last week a database 10g from release 10.1.0.3.0 to 10.1.0.4.0.
Since this upgrade, the AWR doesn't create any snapshot anymore but the process MMON is still living.
I tried to modify the interval of creation (reduce from 1H to 30min) of the snapshot using EM. When I execute the command I receive the following error statement:
Please correct the following error:ORA-13516: SWRF Operation failed: CATPROC not valid ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 83 ORA-06512: at line 1
Should I re-execute some script(s) from .../RDBMS/ADMIN to fix it?
Thank a lot in advance for your support to solve this issue.

Hopefully I could find a post on the Oracle Forum to fix my issue.
I did the following operations:
1) SHUTDOWN IMMEDIATE;
2) STARTUP UPGRADE;
3) SQLPLUS / AS SYSDBA
4) @<Oracle_home>/RDBMS/ADMIN/CATPATCH.SQL
5) When the script completed check that no errors occured.
6) SHUTDOWN IMMEDIATE
7) RESTART
After this the Automatic Workload Repository could execute normally the snapshots and I was able for exemple to modify the frequence of the snapshots creation.
I only don't understand why I had to execute this sql script to get in running. Should this script not be a part of execution of the upgrade 10.1.0.3.0 to 10.1.0.4.0 ?

Server Manageability - Automatic Workload Repository

Hello,
is possible to clean an awr snapshots group, I have problems of space in the SYSAUX, any information would greatly help me.
thanks!
Miguel Cadena

thanks..
Solaris 10 Sparc
Oracle 10.2.0.4 Enterprise Edition
V$SYSAUX_OCCUPANTS
SM/AWR Server Manageability - Automatic Workload Repository SYS *** MOVE PROCEDURE NOT APPLICABLE *** --> 4895232 --> SPACE USAGE KB.
SYSAUX 5.495,6 Mb Used.
The filesystem is already at the top and I need to free this space... removing some old snaps I get?
MAC

Automatic Workload Repository

Hi,
I have tried to ask the same question for a couple of times but haven't received any answer. What is the process EMD_NOTIFICATION.QUEUE_READY? It was running even if I turned the Automatic Workload Repository (AWR) off. It consumes a lot of memory.
I really hope there is someone who can answer my question.
Thanks.
Andy

This procedure appeared to be called by ADDM which will generate report based on AWR data. How did you "turn off" AWR? Is it from EM?
Here's more information about ADDM
http://www.oracle.com/technology/oramag/oracle/04-may/o34tech_talking.html
The problem is this shouldn't greatly impact your system performance. This is actually part Oracle so called self tuning effort. How did you determine it consumes a lot of memory?

Performance tuning--- Automatic workload repository (AWR &ADDM)

hi all,
i am in need of some kind of demo or step-by-step procedure to implement Oracle 10G Automated workload repository and ADDM....................
atleast Point me metalink note should work fine .... actually i need real time implementation details .....
i will appreciate if any one can post their real time implementation experience/procedure ................ that would help me a lot !! i gotta do this in nxt 2 days...........
thanks in adv.

This procedure appeared to be called by ADDM which will generate report based on AWR data. How did you "turn off" AWR? Is it from EM?
Here's more information about ADDM
http://www.oracle.com/technology/oramag/oracle/04-may/o34tech_talking.html
The problem is this shouldn't greatly impact your system performance. This is actually part Oracle so called self tuning effort. How did you determine it consumes a lot of memory?

Error while running awrrpt.sql for Automatic Workload Repository Report

Hi
I am trying to run awrrpt.sql.While running the query in sql*plus it ask me for file format then no of days
& then begin & end snapshot Id & then eventually the sql*plus session get closed . I am unable find
why sql*plus session getting closed automatically.Please tell me How to run awrrpt.sql to generate AWR reports. Please guide.

1008032 wrote:
Dear
This is happen due to you are given the begin snap id and end snap id not between the shut down time .EX begin snap it at 12 am 1521 and you shut down at 12:30 am and you you give the 1:00 am snap id 1522 .That time system can not collect the statistics betwwn 1521 and 1522.
Or you should enable statistics_level parameter if it 11gr2 you should enable controlfile_management_pack _access='DIAGNOSTIC+TUNING'
issue not resolved please post your error..........
Thanks&regards
SS.vijaibabuI checked my statistics_level it shows value TYPICAL which I think is right.
SQL> sho parameter statistics_level
NAME TYPE VALUE
statistics_level string TYPICALAlso I given snap id which between single startup & shutdown still the problem is same sqlplus session get closed after asking for snal ids.
If error gets generated where it gets generated?

Workflow got Stopped How to restart

i have an issue with my workflow, coulpe of back gnd steps involved in my workflow. those steps are completed after that one user decision step defined .one background step i.e send mail step is defined that is completed after that user decision step is defined. my workflow got stuck between those 2 steps. based on that workflow log (Technical details Edit-->Change) the back ground job got completed.after that User decision step defined. workflow not passed to that step.
How shold i restart the workflow in Production in this case.
Regards,
shiva.

hi swaminathan
Thanks for you reply.
As per our bussiness when workflow triggered then one mail will aslo go to vendor. if i execute from swus again workflow will trigger. also our scenario 3 approvers are ther 1 approver already approved after that mail step is defined as back ground, saying that (your inbox having wokitem ,please complete etc ...) for 2nd approver again user decision step is there But betwenn thsese 2 steps workflow stuck.
Regards,
Siva

HT4623 While update there is an error and my iPhone stop, how to restart

Please help to restart my iphone4

Perform a hard reset on your iPhone (press the Home button and the Sleep to screen off)
Connect the USB cable to your iPhone and launch iTunes
It's time to position your iPhone into DFU mode (Device Firmware Update) how: Press the Home button and the Sleep for 10 seconds (remember 10 seconds!), After ten seconds, release the sleep button and press and hold the Home button for 10 seconds (if you do it all correctly and the time is right) then it will display a message from iTunes like this.
If you do not get a message like that, repeat step 3, until you get a message like the above on your iTunes.
After step 3 successfully, iTunes will start restoring your iPhone firmware to its default alias originis firmware
After the restore process is complete, your iPhone will reboots and if your iPhone is connected to iTunes, so flame, iTunes will offer the iPhone restore from backup that you created (which will restore the contacts, music, video, photo, and application), if you previously never backed up your iPhone, you should select this option.
The process of backing up restore your iPhone will take approximately 2 to 3 hours, so you should be patient.
Once completed, iTunes will inform you and your iPhone will reboot again
The next process, sync your iPhone your iTunes, if the iPhone has been running with the normal synchronization process would not be a problem.
Congratulations, your iPhone is running normally again.

Workload Repository Snapshot error

Hello,
Can any one have a better understanding of this error and let me know how to solve this and make it run properly?
1 BEGIN
2 FOR I IN 1..1000000
3 LOOP
4 INSERT INTO T101 VALUES('LARGE STRING');
5 END LOOP;
6* END;
SQL> /
BEGIN
ERROR at line 1:
ORA-01653: unable to extend table SYS.T101 by 8 in tablespace C101
ORA-06512: at line 4
Thanks a lot
Alain

Hello,
Yeah I added two datafiles to the tablespace as you may see bellow but it keep on giving the same error is that any thing else i can do? or the datafiles added are not enough?
1 BEGIN
2 FOR I IN 1..100000
3 LOOP
4 INSERT INTO T101 VALUES('LARGE STRING');
5 END LOOP;
6* END;
SQL> /
BEGIN
ERROR at line 1:
ORA-01653: unable to extend table SYS.T101 by 8 in tablespace C101
ORA-06512: at line 4
SQL> ALTER TABLESPACE C101
2 ADD DATAFILE '/u01/app/oracle/oradata/orcl/c101a.dbf'
3 SIZE 5M
4 /
Tablespace altered.
SQL> begin
2 for i in 1..1000000
3 loop
4 insert into t101 values('large string');
5 end loop;
6 end;
7 /
begin
ERROR at line 1:
ORA-01653: unable to extend table SYS.T101 by 128 in tablespace C101
ORA-06512: at line 4
SQL> ALTER TABLESPACE C101
2 ADD DATAFILE '/u01/app/oracle/oradata/orcl/c101b.dbf'
3 SIZE 5M
4 /
Tablespace altered.
SQL> begin
2 for i in 1..1000000
3 loop
4 insert into t101 values('large string');
5 end loop;
6 end;
7 /
begin
ERROR at line 1:
ORA-01653: unable to extend table SYS.T101 by 128 in tablespace C101
ORA-06512: at line 4

Server Manageability - Automatic Workload Repository increasing in size

I have noticed that the SYSAUX tablespace is increasing in size to a high level and would like some help in planning what to do about it.
I have changed the SNAP_INTERVAL to 2 hours in the meantime, it was set to the default 1 hour with 7 days of retention.
I have been monitoring the occupants of SYSAUX and SM/AWR is the one that is mostly increasing in size, it has gone from 225664Kb to 250496 in one day, which relates to a change of 18% down to 16% free so in approx 8 days it will be full.
Should I just add another datafile, or is a reduced interval/retention satisfactory

I have discovered that the table wwv_flow_data_load_bad_log is quite large but strangely (in TOAD) I can desc the table but if I try to select * from sys.wwv_flow_data_load_bad_log I get ORA_00942 table or view does not exist (logged in as sys)
I have search these forums, metalink and google but cannot find any mention of this table.
It seems to be a listing of ORA error messages
Can I safely delete rows from this table? How do I do that?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

How can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated

how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting down

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Snow Leopard- How can I stop cupsd from restarting? Trying to edit printer IP addresses

I want to edit etc/cups/printers.conf to change printer IP addresses in Snow Leopard. I edit after "sudo killall -9 cupsd". cupsd restarts before I can finish the edit. How can I stop cupsd from restarting until I finish editing printer.conf?

You can try the following:
sudo launchctl unload /System/Library/LaunchDaemons/org.cups.cupsd.plist
Have you attempted to administer cups thru the web interface @ http://localhost:631 ?

KMC Migration Tool stopped. How to restart avoiding the finished steps?

Hi,
I'm using KMC Migration Tool for upgrading EP 6.0 SP 2 (6.20) to EP NW04 SPS15 (6.40). We have experienced some network problems, and the process of DB migration has stopped between the end of the migration of task AP - completed suscesfully (the last step of the Migration the DataBase, many hours!!) - and the begining of the synchronization the fsdb Repositories (only a few minutes). When I tried to restart the process of DB migration, the KMC Migration tool tried restarting all the migration tasks from the begining of the DB Migration.
How to restart avoiding the finished steps? How can I avoid to repeat the migration of the DB from the begining, especially if it has executed suscesfully? Can I synchronize the FSDB repositories manually at the end of the EP migration? How can I do it?
If I had to restart the process, is it necessary to restore the target DB, or the process does not insert records from the last execution?
Many thanks for your help,
Best regards,

Hi,
CM repositories in FSDB mode can have a manual backup before configuring the local root. The XML file provides the description of behaviors and persistence levels for the file system. To have a manual backup the auto sync has to be deactivated or else there will be a huge meta data loss.
what i feel is like you have to restore the DB before manual bacup(.if the Auto sync is activated). However, i dont think so that you can resume the migration.
Regards,
Anand

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

Automatic Workload Repository Snapshots stopped ! How to restart

Similar Messages

Maybe you are looking for