Automatical uninatall ThinkVantage Access Conections
We need to uninstall ThinkVantage Access Connections for more than 5000 clients. But we can not do it manually. Who Can tell how to make the automatic removal of ThinkVantage Access Connections?
Solved!
Go to Solution.
Hi,
the silent uninstallation method is different by every version of AC that you are using.
Becasue of this I would advice to do following, to determinate the AC uninstall string:
go to registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products]
press CTRL+F and type "Access Connections" <so that you can find it quicker in the whole ID list>
Optionaly you can find the uninstall string in following reg key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall]
Basically if you press by the first option CTRL+F and look for the Access Connections string, then it should direct you to the correct key.
Once you will find the key, look up for the key called: "UninstallStrin"
This is the whole uninstallation string, that you can usin through command line, or remotely using a script to get Ac uninstalled.
If you are looking for the fully silent uninstall command, then you can add "/s" switch to the end of the command to :
/s -l0x9
Please let me know, if that worked for you .
Rgrds
Similar Messages
-
Need help with thinkvantage access connection
Here a log file with new access connection:
Connection status: Disconnected
Cause: Driver disconnected while associating.
Error code: 229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name 11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type Wireless LAN
Adapter speed 54.0 Mbps
Driver/Firmware version 7.6.0.96/ N/A
Adapter status Enabled
Connection Status Disconnected
Disable unused cards? Yes
TCP/IP Settings
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
Network name (SSID) linksys
Connection type Access point
Wireless mode Auto
Security encryption None
System Information
System model 7732CTO
BIOS version 7LETB7WW (2.17 )
Operating system version Windows Vista, Service pack 2
Access connections version 5.31
Access Point scan list
Network name (SSID) Wireless mode MAC address Signal strength Channel
linksys 802.11g 00:1C:10:54:65:B6 24% 11
Global Settings
Network
Allow all users of this system to switch to any existing location profile -> No
Allow the wireless LAN radio to be turned off when inactive -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu -> Yes
Enable autodeletion of unused profiles -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Preferences
Enable sound effects -> Yes
Do not show balloon tips from the Access Connections system tray icon -> Yes
Show WiMAX page as default on Main GUI -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX -> No
Wireless priority list
Selection Priority Location profile name Connection order Connection details
No 1 linksys Wireless LAN SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check. -
Use thinkvantage access connections to map a network drive
Is it possible to use thinkvantage access connections to map a network drive. I have three different basic sites (home, work1, work2) with network drives that I would like to access depending on the site.
1) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile?
2) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile that is based on vpn connection?
thanks in advance
sincerely, andersHi,
directly it's not possible for Access Connection to reconfigure your network drives.
However, there is one really cool part of Access Connection, that might be realy suitable for your situation. This part is the script/application, that can be executed when a profile gets applied.
So for your situation I can imagine, that you create a .bat file, that contains something like this:
net use * /DELETE /YES
net use Z: \\computer name\share name
The first part will delete all maped drives. The second part will establish connection that you want to use. Of course you can multiply the last part, so that you can configure multiple connections.
Please let me know, if this helps.
Cheers -
Thinkvantage Access Stopped working
Thinkvantage Access connections main service stopped working this happenedafter devicedriver package, Install Microsoft network protocol happened automatically now i have no inter net connection, please can tell how to resolve this issue
Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John -
ThinkVantage Access Connections cannot export .loc profile
Hello,
I've tried to export one of the location profiles in Thinkvantage AC. The function however is disabled in the profile maintenance window/menu. Access connection thus only allows importing, but no exports possible.
I've already tried using the Deployment tool for creating .loa files. But as this is binary gibberish, it's not much more useful to me than a registry export.
So, does anybody alternatively have a *.loc file at hand for public viewing? Couldn't find a single example on the web. (Much less in Lenovos documentation or web site...)
Thanks!
mario
Moderator Note; Please correct your location in your profile as required by the forum rules; Location is important when offering advice, as sales, service, and product options may not be consistent country to country
Message Edited by andyP on 07-02-2008 08:36 PMHere's an update to my situation:
ThinkVantage Access Connections Issue
I just gave up on this and uninstalled it so no conflicts on this now. (Not critical to me unless someone more knowledgeable thinks it should be!)
Rescue and Recovery: I tried reinstalling both the Thinkvantage version 4.21 and Rapid Restore 4.0 after disabling all virus protection and uninstalling whichever one was on at that time.
Thinkvantage version 4.21: Gave me tons of errors in the pre windows R&R environment so I gave up after rebooting a couple of times It told me there was a problem with factory.exe and the following files were "corrupt and unreadable":
netdgdxb.PNF
nettcpip.PNF
netvt86.PNF
netw940.PNF
net557.PNF
netand2.PNF
netbrdgm.PNF
netce2.PNF
NetSetup.Log
Rapid Restore 4.0: Reinstalled from c:\ibmtools\apps.
Ran both "Create Rescue Media" and Rapid Restore 4.0. "Create Rescue Media"seemed to work ok and burned a CD for me. Rapid Restore had a problem and closed on it's own, but then proceeded to prompt me through 17 CDs for a backup!?! Can I rely on these? Is there a way to check their integrity? Of course, a fix for the program seeming to end--but not really --would be great. Also, the program to create the factory product recovery disks is no longer in Start-Programs menu. The pre Windows R&R environment seems to load ok--no obvious error messages.
Finally, since I reinstalled the software is the backup to factory info gone from my computer? Is there a way to check? What is the relationship between this and Windows System Restore which is reserving 9Gb on my HD--do I need both?
Thanks in advance!
Message Edited by Padder on 07-12-2009 11:20 PM
Message Edited by Padder on 07-13-2009 07:10 PM -
Thinkvantage Access fails to launch
Kindly requesting help on the Thinkvantage Access running XP on my T-60.
I had to restore my wireless Ethernet device driver a few times and updated my Thinkvantage Access program. Now the Thinkvantage Access will not run. Whe one clicks to run the program, the hour glass will appear for a minute or so and then the hour glass will simply disappear, and everything will be back to as if nothing has happened.I do have the icon at the bottom of the display and the menu will appear when one clicks on it. But one cannot select, launch or modify anything from the menu.
I have unistalled and installed Access a few times and could not fix the problem.
I do not know if it is related, but my Thinkvantage Productivy program will not work either. The program will install without erros but appears nowhere, not in the program group, not by the BLUE button.
I have updated my BIOS. Do not know if it matters.
Any assistance will be much appreciated....Hi,
your situation seems to me like an OS issue, so I would surelly think about geting the system reinstalled. Of course first to make a full backup.
However, as first you can try following:
- uninstall Access Connection (AC)
* reboot the system
- check whether you can see the folder: C:\Program Files\ThinkPad\ConnectUtilities => if yes, then delete the "ConnectUtilities" folder, as it still may contain informations, that are damaging ant reducing the functionality of AC when you install it back
- go to registry : and check if following key exist:
HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Access Connections => if yes, then delete the "Access Connections"-key
Let me know, if this will make any change to your situation.
You know, the basic logic is, that once you delete and install it back, there must be something left on the system, that is making this applicaiton to not to react propperly.
Oh yes, and there is one more thing, that might be interresting to know:
once the AC will not start and you just see the "sand hour" go to %programfiles%\ThinkPad\ConnectUtilities and try to run the applicaiton by double-clicking on the "Access Connections.exe". If the double-click on this file will make no change, then try to check if you have the file "ACMainGUI.exe" present in this folder and try to execute him.
Let me know the results.
Cheers -
X31 ThinkVantage Access Connections problem
Dear All
Please help me
I have a problem on my X31 laptop
I connected to wireless network by using ThinkVantage Access Connections, when I press "Test connection", it said that:
Error code: 018
Recommended action: Internet is not responding. Verify the configuration of your firewall program
what can I do to fix this ploblem?Were you ever able to find the answer to this, as I'm having the exact same problem. Thanks.
-
Thinkvantage Access Connection reinstall help
I removed the Thinkvantage Access Connection program because I was having problems connecting to the wireless network in my home. I thought I'd try the Windows network connection but I couldn't get it to work. I now want to reinstall the Thinkvantage Access but don't know how. My T61 did not come with any disks. Where can i find this program, or do I have to do a full restore?
thanksHello slojes,
here´s a guide from Lenovo to properly install AC and Wlan drivers.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Thinkvantage Access Connections on W520
I would like to use the Thinkvantage Access Connections on my W520. I have found where to download the files. In the Read Me document it state that the model W520 is supported but the network connector is not listed in the "supported device" list.
I want to use the Thinkvantage Access Connections for my LAN networks.
It is a bit confusing now. Is the Thinkvantage Access Connections available for the W520 model or not?
Thank youHey Bostoe,
Yes it is if you look at the links below one is to Access Connections for w520
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS030044#devices
which shows that it is supported and the next link is to Psref for a w520
http://www.lenovo.com/psref/pdf/tabook.pdf
which show the wlan that is installed which shows up on supported hardware. Now if yours is different from any of the above please post the device you have and we will be more then happy to help in any way we can.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out! -
ThinkVantage Access Connection disconnects
ThinkVantage Access Connection disconnects from the Network after resuming from Sleep or Hibernate. The only way to reconnect to the Network is to reboot. OS is Vista Home Premium installed on Lenovo notebook 3000 N100. This problem just recently began. Have not made any changes that could have possibly caused this problem. Any suggestions would be appreciated.
Hello slojes,
here´s a guide from Lenovo to properly install AC and Wlan drivers.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
T400 - Thinkvantage Access Connections not connecting after sleep/hibernate
I have a relatively new T400 for work - and there are no problems connecting wirelessly at work. However, I have set up my home wireless network, and I have problems.
When I power up my laptop, I can create a Connection Profile for my home network - and it connects no problem. However, if I let the laptop go to sleep, it will not reconnect upon waking up. Using the diagnostics, I get 3 errors - (a) make sure your encryption settings are correct for this network (it connected before, so they are)
(b) contact network adminstrator (that's me)
(c) your profile is on the same channel as an active network (yup - mine)
The only solution appears to be to delete the profile, reboot the PC, and recreate the profile.
Windows XP Pro, Thinkvantage Access COnnections 5, Intel 5100 wireless card (and T400 as I indicated earlier).
Any tips?
Thx,
jasonAll of hte MS updates are applied. I have tried the Thinkvantage System Update utility, but it does not work (System Update 3). When I start it, I get the splash screen for the program, and after a few minutes the splash screen disappears; when I check teh taks manager, the system update tool is not listed in the Applications tab.
-
Java and Ms access conection and modification
Hello everyone,
I have two problems:
1. I need to create tool that will create a test database and later on to populate it. The first problem is connected with creating the file. I do not know whether this is possible or not, but I want to create a file in which later on I can create tables and insert some values in the tables.
2. In this problem I want to input meaningfull values in the database columns? I do not know how this could be done.
Also at the moment I am have created the application and connect the application with a database file created from MS Access, with ODBC driver through the Control Panel.. What I mean to do is to create dinamicaly file according to the user input, and to populate that file with meaningfull data(values) later on. This is all done automatically, the user do not have to insert the values in the database, but through For loop at the moment I am inserting some kind of values, rows in the database, according the users input.
Any tips and help regarding any of the two above problems will be appreciated.
Thanks to everyone,
Borce.Thanks for the reply. How do you mean to make a copy
of a "empty" file? From the command line....
copy empty.db mystuff.db
In your java code you do the same.
To create one file with MS Access
and than to use the copy of this file? If this is
what you mean thanks a lot, I thought that idea, but
I did had time to work on it. Yes that is one way,
and I will check whether it will work, if the user
changes the name of the file into something else.
That is the only way unless you want to use JNI and OLE (and I am only guessing that it is possible to do it that way.)
Also I have one more question, is it possible to use
the file, what I mean by use is to create table in it
or to insert values if I have not set this file to be
the database file in the Control Panel? Search for "DSN-less" connection strings for MS Access in this forum. The url must be exact or it will not work.
>
For the second problem, what I mean by meaningfull
data is that if the name of the column is "Name" to
put some kind of characters or to input from file. I
beleave that the meaningfull data. :) Still doesn't mean anything.
If you just want to populate the initial database with a small amount of data then just do it manually. Then that is what you use for the initial copy.
If it is more complicated then you can either use the MS Access import feature in the GUI (and still do the above copy) or you write some java code, perhaps getting the data from a file or not (up to you.) -
ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup
I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
Also just installed new .net framework 4 as well.
thanks for any help
ian
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: pcdrcui.exe
Problem Signature 02: 6.0.5514.59
Problem Signature 03: 4c0eb0cb
Problem Signature 04: wpfview
Problem Signature 05: 6.0.5514.59
Problem Signature 06: 4c0eb0cb
Problem Signature 07: f8
Problem Signature 08: 9c
Problem Signature 09: System.IO.FileNotFoundException
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Description: Stopped working
Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: pcdrcui.exe Problem Signature 02: 6.0.5514.59 Problem Signature 03: 4c0eb0cb Problem Signature 04: wpfview Problem Signature 05: 6.0.5514.59 Problem Signature 06: 4c0eb0cb Problem Signature 07: f8 Problem Signature 08: 9c Problem Signature 09: System.IO.FileNotFoundException OS Version: 6.0.6002.2.2.0.256.6 Locale ID: 1033
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: PWMUI.EXE
Application Version: 1.0.0.0
Application Timestamp: 4bea35c2
Fault Module Name: KERNEL32.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037dd
Exception Code: e0434f4d
Exception Offset: 0003fbae
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: Access Connections.exe
Application Version: 5.3.0.0
Application Timestamp: 4bcff8d0
Fault Module Name: KERNEL32.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037dd
Exception Code: e0434f4d
Exception Offset: 0003fbae
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033Hi...
I too have got the same problem...
i dont know when it started as it was running fine....earlier..
In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
The wireless status also runs fine
Same is the case with Power Manager
Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
Like by the Lenovo toolbox too crashes
I am using Lenovo X100e with win 7 starter edition
i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped -
Automatic batch determination - access sequence and search procedure
Hello all,
I would like to know how will the system automatically start a batch determination for TOs in warehouse.
pl. post any documents related to it.
I would like to know how to activate automatic batch determination in the system for transfer orders in warehouse management. is there any specific t-code or should i make any customizing settings in Batch management.
Also how to create access sequence and how to activate or create search procedure/business procedure while implementing automatic batch determination. is there any specific t-code or should i make any customizing settings in Batch management.
Pl. post any links or config. documents for automatic batch determination.
Thanks,
Maxxhi
in delivery select the line item click on batch split, then click on batch determination.
you will find strategy analysis icon click on that.
you can analyse your condition type and understand for which combination condition record is maintained and batch got determined.
regards
Gopi Ponnala -
Thinkvantage "access connections windows wireless service" has stopped working
My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
JohnThank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John
Maybe you are looking for
-
Installing Oracle 8.1.7 on Windows 2000
Hi Guys, I am trying to install Oracle 8i ( 8.1.7) on windows 2000 (P4) ...but when i click install products ...nothing happens....ie setup screen doesnot come up.....any woraround techniques or its bug .... Thanks in advance... Dhananjaya
-
My iTunes, wont play my music..
Hi, my iTunes wont play music.. And my computer is BRAND new.. i got it today. I tried to fix my aduio because there wasent any bass.. and i got i fixed, and when i tried to play one of the songs from my iTunes, i didnt work. I have uninstalled iTune
-
"Missing files" NOT actually missing
I had some drive problems that during play and syncing made iTunes mark many of my files "missing". With the working drive, these tracks are not actually missing - double-clicking on each one will refresh its view. The problem is that iTunes seems sa
-
Have you used RUTMSJOB before? I run this report in SE38 and hits error, in the log file, it says some of the table/view is not consistence. I went to SE14, entered the mentioned table/view then go to Extra ->Database Object ->Check, I have the same
-
How to open local file link in IE ?
I know, this question is not APEX-related per se, but I was not able to google the fix to this problem. In my application, users can open a file open dialog and retrieve a complete file path that is later stored in the DB. Of course, Firefox's javasc