Automatically add file name footer of converted file
If I combine multiple files into a single PDF in Acrobat 9, is there a way to have each file's name printed as a header or footer in my PDF? Thanks.
Hi TexfloSW,
Please send a sample PDF of this issue.
Regards,
Ratnesh
Similar Messages
-
Automatically add files to iTunes not processing mp4 files on Windows 8.1
I have iTunes 12.1.1.4 install on a Windows 8 (x64) system. I have been using iTunes for quite some time and my library is located at c:\Music. On earlier versions (version 10 of iTunes for example) I would drop an MP4 file into c:\Music\Automatically Add to iTunes" directory and iTunes would process this file and add to either the movies or TV Shows section.
I have not used this feature in some time but now have started to. Currently, if I place the mp4 in that directory, iTunes does not do anything with the video. I have gotten to using "Add Folder to Library" and iTunes will then process the directory. I do have "Keep iTunes Media folder organized" and "Copy Files to iTunes Media folder when adding to library" checked.
How can I get iTunes to recognize that a file has been placed in this directory and process it?Two possibilities:
iTunes has processed the file but has categorized it as "Home Movies" rather than other video kinds - in this case you'll be able to find it under that heading in iTunes. Note that there's a bug in iTunes 12 where even if you then change the media kind - for example, to "TV Show" or "Movie" - it will be shown in the new category in the iTunes UI but the files will still be in the "Home Movies" folder under iTunes Media
If iTunes has not been able to process the file, you should find within a Not Added folder under Automatically Add to iTunes - the most likely cause of this is that the MP4 files are using a codec that is not compatible with iTunes. -
How to automatically add file name to email subject line
I just upgraded from Adobe Acrobat Pro 9 to Adobe Acrobat XI Pro.
Previously, when I sent a form via email in outlook, the subject line of the email automatically filled the file name. With this new version, this no longer happens.
Is there a setting that allows me to automatically fill the subject line of the pdf with the file name (or some way for me to set the subject line automaticallly)? Most of my emailed pdf forms go to the same person with the same subject line.
Thank you for your consideration!Unfortunately Adobe lacks the ability to control and access the email attachment file names.
You can set a standard submit button url action to a mailto command string with a mailto:you[at]yourdomain.com&subject=Your+Custom+Subject+Here
But you won't be able to know what the file name is to insert it into the subject.
To have full control over the output, I suggest you submit the data or whole PDF to a server-side script, such as PHP or ASP.net.
A script can can inject a field values into the custom SMTP email body, subject, recipient lists and attachment file name by parsing the submission or passing values via a Querystring.
Visit pdfemail.net for online examples and more information on server-side scripting. -
Can I create an automatic custom file save name/path once I click digital signature field?
Hi,
What I'm trying to do is once I click on a digital signature and I add my digital signature it requires me to sign it. I want to know if there's a workaround to where once I click it it will automatically save to a file name based on a field and to a pre-determined directory? Say, if I want it to save to a users desktop. My supervisor is wanting to eliminate his employees having to change the file name to the format he wants and selecting the save location and make it automatic for everyone to have it saved at the same location on their computers.
Will likely have everyone in the office create a folder named 'Leave Requests'. This will be the location on the desktop where all these automatically saved files would go. The custom file name would be Emp_Name + "Leave Request" + Date where Emp_Name and Date are 2 variables that are user inputted field values on the form. I have looked around but there doesn't seem to be too much on this one. I do realize I can't create a custom 'Save As' location and path name but I have read a little about creating a custom automatic save feature and wanted to know if I could implement that. Here is the information I read about:
http://acrobatusers.com/tutorials/print/how-save-pdf-acrobat-javascript
I appreciate all help any of you can give me in this matter. Thanks!!!This tutorial is great!
http://mydesignpad.com/create-a-complex-html-email-signature-for-mail-on-mac-os- x-10-9-mavericks -
When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?
This "error note" must have something to do about it?elppaelo,
You may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Based on wich file information does iTunes sort music in "Automatically add to iTunes" folder?
Hey I have some files ( here 3 for example).
I put them into the "Automatically add to iTunes" Folder.
After that iTunes sorts them without any problem.
But based on which information does iTunes sort them?
I looked into the details of the file but i cannot find the structure.
Look at your self:
File:
M:\Music\Media\Music\Phil Collins\Hits\07 Against All Odds.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Against All Odds
Performers : {Phil Collins}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Phil Collins}
Composers : {Phil Collins}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Hits
Comment :
Genres : {Adult Contemporary}
Year : 1984
Track : 7
TrackCount : 0
Disc : 1
DiscCount : 1
Lyrics :
Grouping :
BeatsPerMinute : 121
Conductor :
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Phil Collins}
FirstArtist : Phil Collins
FirstAlbumArtist : Phil Collins
FirstAlbumArtistSort :
FirstPerformer : Phil Collins
FirstPerformerSort :
FirstComposerSort :
FirstComposer : Phil Collins
FirstGenre : Adult Contemporary
JoinedArtists : Phil Collins
JoinedAlbumArtists : Phil Collins
JoinedPerformers : Phil Collins
JoinedPerformersSort :
JoinedComposers : Phil Collins
JoinedGenres : Adult Contemporary
File2:
M:\Music\Media\Music\Compilations\Das Dschungelbuch - Deutscher Original F\06 Ich Wäre Gern Wie Du.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Ich Wäre Gern Wie Du
Performers : {Disney}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Disney}
Composers : {R. M. Sherman}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Das Dschungelbuch - Deutscher Original Film-Soundtrack
Comment :
Genres : {Film-musik}
Year : 2007
Track : 6
TrackCount : 0
Disc : 1
DiscCount : 1
Lyrics :
Grouping :
BeatsPerMinute : 0
Conductor :
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Disney}
FirstArtist : Disney
FirstAlbumArtist : Disney
FirstAlbumArtistSort :
FirstPerformer : Disney
FirstPerformerSort :
FirstComposerSort :
FirstComposer : R. M. Sherman
FirstGenre : Film-musik
JoinedArtists : Disney
JoinedAlbumArtists : Disney
JoinedPerformers : Disney
JoinedPerformersSort :
JoinedComposers : R. M. Sherman
JoinedGenres : Film-musik
File3:
M:\Music\Media\Music\Compilations\Album\9999 Title.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Title
Performers : {Contributing artists}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Album artist}
Composers : {Composers}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Album
Comment : Comments
Genres : {Genre}
Year : 2013
Track : 9999
TrackCount : 0
Disc : 0
DiscCount : 0
Lyrics :
Grouping : Group description
BeatsPerMinute : 1111
Conductor : Conductors
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Contributing artists}
FirstArtist : Contributing artists
FirstAlbumArtist : Album artist
FirstAlbumArtistSort :
FirstPerformer : Contributing artists
FirstPerformerSort :
FirstComposerSort :
FirstComposer : Composers
FirstGenre : Genre
JoinedArtists : Contributing artists
JoinedAlbumArtists : Album artist
JoinedPerformers : Contributing artists
JoinedPerformersSort :
JoinedComposers : Composers
JoinedGenres : Genre
Thank you for your help in advance.
Mk-maddinPast experience suggests that iTunes doesn't handle files with multiple tags well. I've not worked out which tag gets read when there are multiple tags but I've seen cases where iTunes can update one while reading back unchanged data fom the other.
At the file level iTunes will organize the files first by Album Artist, or if blank, Artist, or if blank use Unknown Artist. If the tracks have the custom iTunes property Part of a Compilation = True then they get stored in the Compilations folder instead of under their artist.
The next layer of folders is based on Album title or Unknown Album if none given.
FIles are stored in the format [[<Disc> ]## ]<Name>.<Ext> where leading disc numbers are omitted if the the disc no. reads 1 of 1 or 1 of <Blank>.
Tracks with the same Album Artist or Artist and the same Album title should be grouped together in iTunes as albums.
Within the iTunes interface sorting is based on the first non-empty value from Sort Album Artist > Album Artist > Sort Artist > Artist and Sort Album > Album.
See Grouping tracks into albums for more info.
tt2 -
How to Add Header and Footer in Flat file
HI All,
I am using ODI 11g.
MY interface is populating data from joining to 2 tables through sql query and Loads in to Flat file.
But i need to add Header and Footer in the Flat file.
In the below 3 lines
The 1st line is header ....2nd line is Data ....3rd line is Footer.
Any ideas how to work on this.
HSB9KT.KTPRTO.EBSDATA.D0000000 20120626020636
CFFE00263 SOLGSR014991340000527894536058173880207SOLNE06242012072420120000009048382650000247MRS
T00000000000000000000
Thanks,
LonyHi Drieux,
i am able to add Header and Footer in this.
But i want the header like Its like HSB9KT.KTPRTO.EBSDATA.D0000000 || SYSDATE (YYYYMMDDHHMMSS)
In my Out put i only see header as HSB9KT.KTPRTO.EBSDATA.D0000000 .
I have added a Variable where i am using SELECT to_char(sysdate,'YYYYMMDDHHMMSS') FROM DUAL query.
create header (HSB9KT.KTPRTO.EBSDATA.D0000000 #v_DATE)
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=FFT_SOLSNP$CRLOAD_FILE=/home/tarak/FFT_SOL.datSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=descrSNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=1SNP$CRLENGTH=994SNP$CRPRECISION=994SNP$CR$$SNPS_END_KEY*/
Any idea why this sysdate part is not showing in Header. -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
How to add header and footer to a file through ODI?
hi,
I want to add header and footer to my file..............footer should contain a counter so that page number can be displayed...................
Can anyone please guide me .................
Thanks .............
Ritikawhat is the utility you are using to create file . Interface or OdiSqlUnload ?
and what do you want to have Header and Footer as and how are you concluding the File as page 1 and page 2 etc ... ? -
How to add coloum name in a exel sheet download file?
Dear all,
I amdownloading a excel sheet from a internal table.I am getting all data correctly.
but now i want to add coloumn name for each coloumn.
How can I do it?
i had try from work area and insert at first index but not get proper result.....
so if possible plz suggest sampl code also.
Regards
RickyHi Ricky Maheswari,
I will send a sample code for u.check it once.I execute the below code that is executed successfully.
In my report u have check these things carefully "PEFORM APPEND_HEADER " and SELECT STATEMENT(I use appending table stmt there).Then ur problem will be resolved.
code:
*& Report YBDC_DOWNLOAD_MM01_XLS *
*& DEVELOPER : KIRAN KUMAR.G *
*& PURPOSE : FETCH DATA FROM DB AND PLACE THEM IN .XLS FILE *
*& CREATION DT : 2/12/2007 *
*& REQUEST : ERPK900035 *
*& NOTE : MENTION PATH & MENTION FILE.XLS IN THE SELE-SCREEN *
REPORT ybdc_download_mm01_xls MESSAGE-ID zbdcmsg.
Tables
TABLES: mara, "General Material Data
makt. "Material Descriptions
Global Variables
DATA: gv_path TYPE string. "Hold Path Selection Information
Internal Table
DATA : BEGIN OF gt_data OCCURS 0,
matnr(20), " Material Number
mbrsh(20), " Industry Sector
mtart(20), " Material Type
meins(20), " Base Unit Of Measure
maktx(20), " Material Description
END OF gt_data.
Selection-Screen
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file(90).
SELECTION-SCREEN : END OF BLOCK b1.
SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS : s_matnr FOR mara-matnr,
s_mbrsh FOR mara-mbrsh,
s_mtart FOR mara-mtart,
s_maktx FOR makt-maktx,
s_meins FOR mara-meins.
SELECTION-SCREEN : END OF BLOCK b2.
Initialization
INITIALIZATION.
PERFORM initial.
Placing A File In The Directory
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM path_directory.
START-OF-SELECTION.
Append Some Header Information To XLS File
PERFORM append_header.
Fetching The Data
PERFORM fecth_data.
END-OF-SELECTION.
GUI_DOWNLOAD
PERFORM gui_download.
*& Form path_directory
text
--> p1 text
<-- p2 text
FORM path_directory .
CALL METHOD cl_gui_frontend_services=>directory_browse
EXPORTING
window_title = 'Download A File'
initial_folder = 'c:/'
CHANGING
selected_folder = gv_path
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_cfw=>flush
EXCEPTIONS
cntl_system_error = 1
cntl_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
p_file = gv_path.
CLEAR gv_path.
ENDFORM. " path_directory
*& Form fecth_data
text
--> p1 text
<-- p2 text
FORM fecth_data .
SELECT a~matnr
a~mbrsh
a~mtart
a~meins
b~maktx
FROM mara AS a
INNER JOIN makt AS b ON amatnr = bmatnr
APPENDING TABLE gt_data
WHERE a~matnr IN s_matnr
AND a~mbrsh IN s_mbrsh
AND a~mtart IN s_mtart
AND b~maktx IN s_maktx
AND a~meins IN s_meins.
IF sy-subrc = 0.
MESSAGE s000.
ENDIF.
ENDFORM. " fecth_data
*& Form gui_download
text
--> p1 text
<-- p2 text
FORM gui_download .
gv_path = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = gv_path
filetype = 'ASC'
APPEND = ' '
write_field_separator = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = gt_data
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " gui_download
*& Form append_header
text
--> p1 text
<-- p2 text
FORM append_header .
REFRESH : gt_data.
CLEAR : gt_data.
gt_data-matnr = 'MATERIAL NUMBER'.
gt_data-mbrsh = 'INDUSTRY SECTOR'.
gt_data-mtart = 'MATERIAL TYPE'.
gt_data-maktx = 'MATERIAL DESCRIPTION'.
gt_data-meins = 'BASE UNIT OF MEASURE'.
APPEND gt_data.
CLEAR gt_data.
ENDFORM. " append_header
*& Form initial
text
--> p1 text
<-- p2 text
FORM initial .
s_matnr-sign = 'I'.
s_matnr-option = 'BT'.
s_matnr-low = '800'.
s_matnr-high = '100-200'.
APPEND s_matnr.
s_mbrsh-sign = 'I'.
s_mbrsh-option = 'BT'.
s_mbrsh-low = 'M'.
s_mbrsh-high = ''.
APPEND s_mbrsh.
s_mtart-sign = 'I'.
s_mtart-option = 'BT'.
s_mtart-low = 'FERT'.
s_mtart-high = 'HALB'.
APPEND s_mtart.
s_maktx-sign = 'I'.
s_maktx-option = 'BT'.
s_maktx-low = 'IRON'.
s_maktx-high = 'STEEL'.
APPEND s_maktx.
s_meins-sign = 'I'.
s_meins-option = 'BT'.
s_meins-low = 'CM'.
s_meins-high = 'KG'.
APPEND s_meins.
ENDFORM. " initial
Award points if helpful.
Kiran Kumar.G
Have a Nice Day.. -
When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP...
iTunes does not actively scan the media folders. If you manually add content to a folder, then you must add that content to iTunes manually via the File > Add File/Folder feature.
The only folder that gets scanned is the "Automatically add to iTunes" folder. -
Need to Add Field Name to the Downloaded XLS file
Im using the function SAP_CONVERT_TO_TXT_FORMAT
and downloading the contents by sending them as attachements in email.
I need to add field names(column name) to excel fields.
So that when fields are displayed in excel file they are displayed by their column names..
How do I do this.? Any ideas.
Answers will be rewarded with points..Hi
You can manually insert the column names as the first row in your internal table to have them in .xls file as headers.
Regards,
Raj -
How do I add my name to the camera data file in meta data?
When reviewing the meta data on my photos I see the camera model number, serial number, focal length, etc. The camera owner field is blank. How do I add my name to the camera owner field?
I'm using Photoshop CC, on a windows 8.1 Pro platform. Any help would be greatly appreciated.
CaitlinI did add all the info on the menu section you mentioned above. Unfortunately it does not show up as "Owner" when you view the data file in Photoshop CC for some reason. Copyright info shows properly, but not camera owner. It's not a big problem anyway, just a pride of ownership thingy . I downloaded the GeoSetter program, and after reviewing the meta data contained there I don't see an option for "owner" there either. Perhaps its something that Adobe plans to implement someday, who knows. Thanks for your suggestions everyone.
This is my first DSLR, all I have shot in the past have been film cameras and we didn't have any of this fancy info available unless we wrote it down somewhere, smile. I was still using my old Nikomat that I purchased in 1972 when I was stationed in Japan. I was a bit stubborn when it came to switching to DSLR sorry I waited so long now.
Oh, Trevor, sorry to learn you may be using something other than Nikon, I didn't know there was another brand other than Nikon!
Caitlin -
ITuned 9 "automatically add to itunes" folder does not add files
Help! I am new to iTunes 9, just built a Win 7 HTPC works well but now wanting to add all of my music to iTunes. Have approx 7k songs in iTunes but when I drop any other folders into the Automatically Add to iTunes folder created by iTunes it does nothing with the files. They are not added to the library, they are not moved or deleted.
It makes no difference if I re-start iTunes or if I give the application Administrator privilages. Help / ideas please...I too, have an external drive and it works for me.
The "Automatically Add to iTunes" folder should be in the "iTunes Media" folder on your Music drive. I created a shortcut to this folder and put it on my desktop. I can drag mp3's to this shortcut and they get added to iTunes.
Check your iTunes Advanced Preferences. The "iTunes Media folder location" should be "/Volumes/Music/iTunes Media". You *may* have to check "Keep iTunes Media folder organized". -
I have deleted my "Automatically Add to iTunes" file
Hi,I have deleted my "Automatically Add to iTunes" file and I would like to know how can I have it back.
There are quite a few "Automatic ..." options available for iTunes, but I don't believe there is any specifically worded as you have indicated.
What exactly are you trying to do (or not do)? We need more information. Thanks.
Maybe you are looking for
-
Check Print in the order of Vendor names
Hello, Currently checks are being printed in the order of vendor acc numbers, they want to print them in the order of their names. for e.g is ven acc #1 has name Boy and vendor acc # 2 has name Apple , check number 1 should print Apple or ven #2 f
-
How to find out Forms Server version in pl/sql procedure
How can I get the version number and/or patchset of the Forms Server through which my pl/sql procedure has been called? Thanks, Attila
-
Hyperion Reporting And Analysis Server
Can Some One Tell me what Hyperion Reporting Analysis Server Is? How do we get this Installed at Port 6800 and what is the name of the executable. I can't login into Workspace or Reporting Studio becuase of this server? Thanks Raghu
-
Converting photos for etching machine
I am trying to design a layout for a headstone. It will be etched into black granite. They want a custom landscape done with images that they provided me. How do I change these photos to be a deep black and white that prepared for an etching machine?
-
<pre> I have column PART which contains string as shown below PART BMW PART,TEST PART,TEST PART,HYPER PART,HYPER PART,TESTINGNEWONE,TESTINGNEWONE,TESTINGNEWONE string has got comma separated, i need to project as individual columns like P1 P2 .... P8