Automatically added User rights to LDAP imported Users

Hi folks
I'm working on a fresh install of CUCM 10.5.2 with local and LDAP End Users.
Now I like to add at least End User Rights automatically to the newly imported LDAP Users.
Even if I add an new local user, I like that they have "Standard CCM End User Rights" added per default, if it's possible.
Every help is more than welcome. Thank you very much.
Kind regards
P.Blumenthal

Navigate to System -> LDAP -> LDAP Directory and then select your LDAP syncronization agreement. A little more than halfway down the page there is a "Group Information" section where you can assign the "default rights" given to each LDAP user that gets imported.
Thanks,
rh

Similar Messages

Automatically adding user to company

We're looking at using Delegated User Administration with Companies to limit the scope that some administrators have (they will only be able to assign certain roles to members of their company).
We want all new users to be members of the same company.
Is there a way to automatically assign a new user to a company? Users are only created on R/3 using PFCG, not in the Portal itself.
Thanks, Chris

Hi,
I would start here and ask in the relevant Server Community
https://discussions.apple.com/community/servers_enterprise_software
8:20 pm Thursday; June 12, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to map Primey user when run "LDAP Import"

Hi All
I configure LDAP import in the [Asset Inventory] of [Configuration]. But I find I only map cn to login user.....But the login user maybe not owner (helpdesk ot proxy agent). So I maybe get the incorrect information when I run the report.
Did anybody know How to make the Users' cn map the Primary user for getting the ocrrect information??
Thanks!!
wyld

wyld,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Adding users programmatically -- almost there

... getting close...
Create this procedure in the PORTAL schema.
It works if you call it when connected as PORTAL, but not when connected as anyone else.
It is throwing a user-defined exception frmo inside WWCTX_SSO, so I am guessing that it is looking at the session context and deciding that the SESSION_USER shouldn't be adding users.
Perhaps a true PL/SQL wiz can pick up the ball and figure out what is going on.
FYI this is sandbox code at its grittiest, so don't even think of pasting it into your application 8^)
create or replace procedure ci_add_portal_user
(uname in varchar2,pwd in varchar2, email in varchar2,lname in varchar2,fname in varchar2,clr_lvl in integer)
as
l_guid varchar2(32);
p_user_id number;
sess dbms_ldap.session;
err_code number;
err_msg varchar2(300);
INVALID_GRP_NAME_EXCEPTION exception;
INVALID_SITE_EXCEPTION exception;
VALUE_ERROR_EXCEPTION exception;
DUPLICATE_GROUP_EXCEPTION exception;
GROUP_NOT_FOUND_EXCEPTION exception;
GROUP_MEMBER_EXCEPTION exception;
GROUP_NOT_UNIQUE_EXCEPTION exception;
USER_NOT_FOUND_EXCEPTION exception;
USER_EXISTS_EXCEPTION exception;
APP_NOT_FOUND_EXCEPTION exception;
NO_MANAGER_EXCEPTION exception;
DUPLICATE_GRANTEE_EXCEPTION exception;
NO_ACCESSIBLE_OBJECT_EXCEPTION exception;
ORG_NOT_EXIST_EXCEPTION exception;
INVALID_PERSON_ID_EXCEPTION exception;
ACCESS_DENIED_EXCEPTION exception;
CIRCULAR_REFERENCE_EXCEPTION exception;
UNEXPECTED_EXCEPTION exception;
USER_NOT_DELETABLE_EXCEPTION exception;
INVALID_ARGUMENT_EXCEPTION exception;
INVALID_AUTH_FUNC_EXCEPTION exception;
LDAP_CONNECTION_EXCEPTION exception;
DEPRECATED_API_EXCEPTION exception;
INVALID_ARGUMENT_EXCEPTION exception;
BEGIN
/* Create SSO User */
begin
l_guid := portal.wwsec_oid.create_user_entry
p_base => portal.wwsec_oid.get_user_search_base,
p_user_name => uname,
p_password => pwd,
p_email => email,
p_first_name => fname,
p_last_name => lname,
p_create_state => null,
p_bind_as_user => false
exception when others then
err_code:=SQLCODE;
err_msg:=SQLERRM;
dbms_output.put_line(' Exception :'||err_code||' '||err_msg);
end;
/* Create Portal User */
begin
p_user_id:=portal.wwsec_api.id_sso(p_username=>uname);
dbms_output.put_line('USER ==>'||p_user_id||' '||portal.wwsec_api.user_name(p_user_id));
exception when others then
err_code:=SQLCODE;
err_msg:=SQLERRM;
dbms_output.put_line(' Exception :'||err_code||' '||err_msg);
end;
begin
portal.wwsec_api.add_user_to_list(p_user_id,portal.wwsec_api.group_id('CI_USR'),0);
portal.wwsec_api.set_defaultgroup(portal.wwsec_api.group_id('CI_USR'),uname);
exception when others then
err_code:=SQLCODE;
err_msg:=SQLERRM;
dbms_output.put_line(' Exception :'||err_code||' '||err_msg);
end;
begin
portal.wwsec_api.add_user_to_list(p_user_id,portal.wwsec_api.group_id('CI_CLR_'||clr_lvl),0);
exception when others then
err_code:=SQLCODE;
err_msg:=SQLERRM;
dbms_output.put_line(' Exception :'||err_code||' '||err_msg);
end;
END ci_add_portal_user;

Andrew,
to add a user to a specific group in the FileRealm, try doing the following:
import java.security.acl.Group;
import weblogic.security.acl.BasicRealm;
import weblogic.security.acl.ManageableRealm;
import weblogic.security.acl.Security;
// Create a user in WebLogic
BasicRealm bRealm = Security.getRealm();
ManageableRealm mRealm = (ManageableRealm)bRealm;
if (null == mRealm) { throw new SecurityException("Security Realm is null");
weblogic.security.acl.User oNewUser = mRealm.newUser("username", "password",
null);
// -- Put the new user into the selected group
Enumeration eGroups = mRealm.getGroups();
Group oGroup = mRealm.getGroup("group name you want to add to");
if (null != oGroup) {
oGroup.addMember(oNewUser);
try { mRealm.save("FileRealm.Properties"); } catch (IOException e) { }
Andrew Dunn <[email protected]> wrote:
Thanks, Mike.
I'm trying to use the Default realm in WLS7.0 (which uses LDAP), so
I'm looking for the classes specific to the Default realm - I assume
BEA provides some, but I can't find them in the docs.
On 2 Dec 2002 10:15:18 -0800, "mike" <[email protected]>
wrote:
You will not find implementing classes in general. The thing is thatthey (classes)
are specific to particular implementation of realm you are using (assumingyou
use 6.x or below, but that is logically true for 7). So you need tofind what
are the classes used in your realm and work with those. If you are usingan implementation
shipped with WLS (eg. FIleRealm or LDAP) you will have to use reflection...
Andrew Dunn <[email protected]> wrote:
How can I add users/groups via the Weblogic API? All I can find in
the documenattion is interfaces, but no implementation classes. How
can I instantiate the classes?
Thanks, Andrew

What is the difference between using the command "dsmgmt" and the "Managed By" tab when adding users to the local administrators Account on a Read-Only Domain Controller?

When I use the
"dsmgmt" command to add a user to the local administrators account of a RODC I can actually see the user when I use the "Show Role Administrators" parameter. However, I can't see the members of the
group added to the "Managed By" tab of the RODC object in AD. Even though, the users added using
"dsmgmt" and by the "Managed By" tab can all log in locally and have admin rights to the RODC. Are there any differences between these two ways of adding users to the local administrators account?

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adding users to groups

Hi,
can any one share documents/resources pertaining to how to create sap user groups in BOE.
how to add groups to users.
how to import sap users.
etc

Hi,
You can find the product documentation here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&
Specifically, go to the "Integration for SAP Solutions" section and take a look at the Installation and Administration guide:
https://websmp210.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
As far as adding users and groups to the system, this is down through the CMC. The Business Objects Enterprise Administrators guide should help you with these tasks:
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf
To add users/groups to the BOE system, you have to go into the CMC/Authentication section and click on the SAP tab. In here, you configure your SAP system information and add the groups that you wish to import into BOE. Once you add the groups through here, the user accounts and groups will be mapped in to the Users and Groups section of the CMC. From here, you can treat them like any other group in the system.
You add users to the SAP groups the same way you would for BW or any other SAP product. If a new user is added to an SAP group that is imported into BOE, then that user will be able to logon to the BOE system.
We also have many notes on these subjects.
thanks
Jonathan

Adding users in FDQM

Hi All,
I have around 100 users in the system whom i have provisioned in shared services giving Intermediate-2 access in FDQM. I am aware that to add these users in FDQM i have to do it using Administration menu -> User maintenance .
However, since doing this task (adding user + giving access to locations) is tedious to do for 100 users manually, is it possible to do the same using some kind file upload / automatically with minimal efforts?

It may help you:
http://www.youtube.com/watch?v=7C8cI5zc1DM

I would like to know whether its possible to start running a vi automatically without user interaction after a system has booted up and launched labview?

I would like to know whether its possible to start running a particular vi automatically without user interaction after a system has booted up and launched labview?

> I would like to know whether its possible to start running a vi
> automatically without user interaction after a system has booted up
> and launched labview?
>
> I would like to know whether its possible to start running a
> particular vi automatically without user interaction after a system
> has booted up and launched labview?
>
LV doesn't have any sort of Startup folder as we are a little concerned
about the security issues this brings about. You can specify VIs on the
command line for LV to open. And VIs can be set to run when opened.
Combining these features, you wind up using the system's Startup folder,
placing either a batch file or a shortcut to LV with the command line
options added to list out the VIs, and finally, set the VI properties
so
that the VIs run when opened.
Greg McKaskle

How we can acess GOS to pop up automatically to user from workflow is our a

we plan to implement invoice verification workflow to start when an invoice is scanned and placed in holder in OAWD. So that workflow will start from then onwards with SAP archive link.
Please let us know how we can link scanner and SAP Archive link so that we can place the scanned document directly in to OAWD. how we open the image automatically when approver or AP clerk execute the workitem.
The process we want to follow is
1. Scan document and place in OAWD
2 Workflow is started based on the document type of Archive link( we want to use BKPF)
3 AP clerk receives workitem and execute it. APclerk see the transaction code FV60 to enter document and image of the scan automatically
4 AP clerk fill the document and park the document.
5 Workitem is sent to approver based on the rule specified
6 Approver execute the transaction invoice iamge is opened and sap document is displayed.
7 Approver check both image and sap docuemnt and take decision
8 Approver approves document , sap document is posted and ready for payment
9 If rejected go back to AP clerk.
Here issue is when user or approver execute the workitem ,how we can open image automatically along with sap screen.
or how we can acess GOS to pop up automatically to user from workflow is our another isssue

Hi,
It is possible to launch the stored image as soon as workitem is executed. You will need to maintain the archivelink customization to display stored document. Check the following link
[Displaying Stored Document|http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/993685446d11d189700000e8322d00/content.htm]
Hope this helps
Cheers!!!
Samanjay

Error while Adding user to 'SunAccessManager' Resource

Hi,
I configured SAM Resource adapter in SIM 6.0. When I create a user and assign SAM Resource getting the following Error,
com.waveset.util.WavesetException: An error occurred adding user 'uid=SIMUser2,ou=People,o=Employee,dc=nl,dc=dap,dc=com' to resource 'SunAccessManager'. com.waveset.util.WavesetException: An error occurred creating user. java.lang.IllegalArgumentException: Invalid parameters
Pls help me to resolve this issue
Thanks,
Deva

Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing

Automatically add user to a specific database based on the users title

Is there away to automatically distribute users to a database based on their title? My organization has different quotas depending on your job title, so if you are an Outside sales rep you get a 2 GB mailbox, and if you are a Inside sales rep you
get a 1GB mailbox.

You can do that with cmdlet extension scripting agent. You need to do some custom setup but there are some examples in below articles (specially part 3)
Understanding the Scripting Agent
Cmdlet Extension Agents (Part 1)
Cmdlet Extension Agents (Part 2)
Cmdlet Extension Agents (Part 3)

SP 2010-After adding user from IIS is not found in central admin

Hi Experts,
I am trying to configure my SP 2010 with Form Based Authentication.
After configuring WebSite, STS and Central Admin I added the user from IIS , But not able to found from central admin in Form Authentication.
I checked in database the user is added.
I followed the below blog .
http://jasear.wordpress.com/2012/03/16/sharepoint-2010-setting-up-form-based-authentication-fba-using-asp-net-sql-membership-provider/
Can experts help me how to get the added user to central admin.
Thanks
AshisK

I was finally able to get the FBA working. After many failed attempts, I knew there was a configuration issue which was causing the error.
I provided connection string and provider details at 4 places, instead of the 3 mentioned in various blogs around ->
1. Sharepoint Central Admin
2. Sharepoint Web Services
3. SecurityTokenServiceApplication
4. And finally the web application itself.
The connection string for 2nd and 3rd will remain same however, provider details need to be added.
After completing this step, I was able to login using Form Based Authentication without an issue.
AshisK

Adding users using XML

The examples for adding users to iFS work fine, but do I have to create an XML file for every user I want to add? I tried to create an XML file with more than one <SimpleUser> definitions, but iFS reports an "unexpected end of file" error at the position where the second User definition starts.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jsacks:
Ralf,
Using the standard <object_list> tag to parse a list of simpleuser tags should work:
<HR></BLOCKQUOTE>
Included inside <objectlist> tags, it works fine. Thank you very much.
null

Suddenly getting 404 error when adding user to group

Hi,
I have an OAM 10.1.4.0.1 instance that's been working fine.
However, today, I noticed that when I tried to add a user to a group, when I am in the selector page and click a user, I then get an HTTP 404 error.
I've searched all of the log files that I can find, and I can't see any error messages. The only thing that is showing an error in a log is the IIS that I have setup with WebGate for OAM Admin. I get a "404" error with a sc-win32-status or "3".
I have restarted everything, and that still hasn't helped.
Does anyone here know what might be causing this, or how to diagnose the problem?
Thanks,
Jim

Hi,
I'm answering my own question/problem here, but hopefully this info will help someone else.
I was able to get adding users to groups working again. I found that after I cleared the cache in my browser (IE6), the "add user to groups" started working again, without the HTTP 404 error.
In hindsight, I guess this kind of makes sense, because if you ever watch the URIs on the selector pages, they all look alike, so I'm guessing the IE would not send a full GET request, but the "content" was no longer valid on the OAM server, thus the 404 error.
Jim

Error when manually adding user to project workspace

I am currently using Project Server 2010. I have a requirement for Business Users to have access to the project workspaces in Sharepoint but not be users of the PWA. Similar to as it is outlined in this Microsoft Documentation (http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx)
There might be a circumstance where you want to grant people who are not members of the project access to the project workspace site. Anyone assigned to the Web Administrator group can create new users for a project workspace site. In addition to the
four groups that were mentioned earlier, there are four default SharePoint Server 2010 groups. They are as follows:
Full Control   Has all personal, site, and list permissions.
Design   Can edit lists, document libraries, and pages in the Web site.
Contribute   Can view pages and edit list items and documents.
Read   Can view pages, list items, and documents.
I have added the user to the Contributor group but when they try to contribute to the space, ie add documents or an issue/risk, they recieve an error, similar to as is documented in the following article (http://pwmather.wordpress.com/2011/07/11/manually-adding-users-to-project-workspace-project-site-in-projectserver-ps2010-ps2007-epm/)
What has been identified in this article makes sense.  I am just wondering why Microsoft documentation states that it can be done.
Any thoughts?

Chris,
The Microsoft article says, users who are not part of the project. It does not say not part of project server.
However, as far as I can remember, this scenario could work if the "Synchronization" is turned off between Project Server and Project Sites. I will run a test and confirm, later today.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

Automatically added User rights to LDAP imported Users

Similar Messages

Maybe you are looking for