Automatically Block old vendors or not in use from 24 months

Hi
We would like to Lock all the Dormant vendors (old vendors or not in use) which will not have any transactions for the specified period, say the vendors which will not have any transactions from past 36 Months, or 24 Months.
Do we have any standard SAP functionality to address this, if so please let us know.
If there is no standard SAP functionlity exists, we would like to create an customised program, please suggest us how we can move forward on this.
This functionality is normally required for the business for their Audit purpose.
Thanks in Advance.
Farrukh khan

Hi,
FM available to block " VENDOR_UPDATE"
In structure Editer:* I_LFB1* use field SPERR to block Veodor master through FM.
for identify the un-used vendors build your own logic with help of ABAPer.
use below list of tables to identify un used vendors.
BSIK, KSID and BSEG.
Regards,
Viswa

Similar Messages

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months a year. So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Vendor list - not get transaction from last three years

Dear Sir,
Can we have a list of vendor which are not get transaction from last three years ?
Vijay Vadgaonkar
SAP MM

either you write a z-report
or you download all vendor numbers from LFA1 table
then run MC$4 transaction for analyzing period of last 3 year.
download the vendor numbers from this report as well.
Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
However, these are the inactive vendors from purchasing point of view only.
vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

HT201272 I need past passwords to my old email addresses not currently used but they were the email accounts I used to download them

Who do I talk to to get my old passwords for old email addresses that I once had when I first purchased music. I have had to change computers and email subscribers and now I cannot transfer music from my phone back into Itunes

Reset your password

Bank details of the Vendor are not picked up from Vendor Master in APP Run

Hai SAP Gurus,
When the Automatic Payment Programme(F110) was run it is not giving bank details of the vendor in the payment file. These details are sent to bank in the file form. It should give account holder name in the payment file where as it is not giving.
Kindly help me at the early
Thanks in advance
Akash Narayan

Hi,
Good morning and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e7/65382ad2d211d29e430000e839cd96/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

TS1702 How do you uninstall old programs you no longer use from iCloud ? I have a dozen I no longer use or never used!

Look I have uninstalled the old programs from all devices yet they stay on the iCloud why?
Most programs don't fit my needs or I no longer need them,
I'm going over seas for good most programs won't work in this country!
So I deleted all unnecessary programs such as shopping programs in this country that don't exist in this country?
You need to have a simple delete from iCloud button?
WHY IS APPLE SO SLOW IN MAKING THINGS SIMPLE TO DO???

The apps are always accessible in iCloud in the event that you want to download them again. If you have deleted them from your iPad then what's the problem?
If you are still running iOS 5, you can hide the purchased apps if it bothers you to see them in the purchased tab of the App Store? Is that what you are talking about anyway?
You did remove the apps that you don't want by tapping and holding down on the app icon until the X pops up correct?
If you are running iOS 5, read this.
Hide or Unhide Purchases on iPad
http://support.apple.com/kb/HT4919

HT4061 my ipad 2 was stolen a week ago? can you help me what to do to blocked the ipad not to use by anyone?

My ipad2 was stolen a week ago? Can you help me what to do to blocked my ipad and not be used by anyone? I used different address and i even not put any password lock ang Find my iphone is on? also the location area is not on? please help? Thanks a lot if you can suggest anything? i have so many documents and files in my ipad?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

How do I delete old Bex queries not used within 13 months?

Hello all,
I have a large number of Bex queries that are no longer used (3000 - three thousand). I'd like to delete any query that has not been used in 13 months.
Can someone provide some guidance?
Also, is there anyway to archive old reports?
Thank you.
JIm

Murali,
The RSZCOMPDIR table contains this information - thank you.
The only remaining challenges are:
1) how do I interpret or convert the values in the LASTUSED field? The numbers are of the magnitude of 20,060,601,210,130.
2) Once I determine which queries were not used within the last 13 months, how do I delete them? Is it as simple as writing a SQL statement against this table?
Thanks you.

What are the different types of blocking in vendor / customer MD?

Hi,
in my firm we noticed that several customers were marked for deletion but this mark only provides a warning message once sales order is set up.
We'd like to know how to perform actual blocking of sales order / delivery / billing for customers - what should be done and how in the customer Master Record?
Same problem goes to vendors. Marking for deletion only provides a warning message once a PO is set up, what should be marked and in which transaction in order for this vendor to be blocked for PO / Goods Receipt / Invoice receipt / payment?
Would appreciate your response

Dear okit83,
There are many ways to block the vendor/customer. As above mentioned VD05/XK05 will be used to block the customer/vendor.
Apart from that we can block the customer/vendor from the same master data is self.
Go to xd02/xko2-> Extras->Block data. Here tou can block the customer/vendor from one sales area or from all sales areas pertinent to delivery,sales billing(CUSTOMER). Where as vendor allcompany codes,all purchase organizations.
Similarly you can delete the customer/vendor by using delition flags By XD02/XK02->extras->Deletion flags.
So the customer/Vendor will not be used
Please check and revert
Thanks&Regards
Raghu.k

Mass blocking of vendor

Hi Experts,
My client asked to give acess for Mass blocking of vendor.(T.code: XK99).
If I execute this t.code what is the impication.
I want to do Postivie and negative testing.
Please provide detailed info.
Regards,
Krishna

Hello,
You should know the difference between PAYMENT BLOCK in vendor master and BLOCK the vendor master. Both are different activities.
In the first case it would only put a payment block, but the user master will not be INVALIDATED.
In the second case, it would INVALIDATE vendor master record, results in all kinds of blocks including payment block.
1. For payment block in vendor master you can use XK99 and recommended if there are more than 500 entries are there, then I would suggest you do it in background for performance reasons. Be cautious these changes are IRREVERSABLE.
2. If you want to BLOCK the vendor in all respects, then you need to write LSMW using FK05 (recording).
Hope this is informative.
Regards,
Ravi

Processing Leavers for Employee expenses and blocking their vendor records

Help please:
Is there a set way of stopping Employee expense records in FI when an employee leaves, and putting a payment block on his/her vendor record?
There is no employee status, therefore can the end dates be updated? If so, will this automatically block the vendor record from payments?
I believe that relevant programs are:
RPRAPA00 to load updates against the employee expense record;
RFBIKR00 / RSBDCBTC_SUB to update the vendor record.
Edited by: Andrew Staples on Feb 20, 2008 6:33 PM

Hello Cindy,
Yes, from FBZP it is only possible to do that if it is a House Bank.
Well, I imagine you will have to implement an ABAP user-exit in both processes (Selling, example transaction VF01 and Buying, example transaction MIRO) to check Customer and Vendor bank master data to avoid using the bank you don't want to.
The Customer Bank table is KNBK.
The Vendor Bank table is LFBK.
So, if you have a single bank, it is just a matter of comparing the related record from one of the tables with the bank key.
If there are more than one bank key to check, I suggest you to build a Z table with the "prohibited" bank keys.
Hope it helps you.
Regards,
Daniel.

Automatic blocking and deletion flag for temporary unblocked vendors/custom

Hi All,
Can you please help me IS there any Standard Reports for the Follwing,
*"automatic blocking and deletion flag for temporary unblocked vendors/customers in Master Finance SAP machines"*.
Please reply me as soon as possibly.
Thanks & Regards,
Pavithranad.
Moderator message: please research before asking, do not assign higher urgency than normal.
Edited by: Thomas Zloch on Mar 3, 2011 2:43 PM

In XK06, flagging Vendor for deletion, I get warning "vendor xxxxx has open items in company code xxxx". Does this mean open Invoice Items, pending payment in FI? Since this is just warning I can hit enter and go ahead and save.
- YES YOU ARE RIGHT. IT CAN ALSO INCLUDE OPEN PO.
But, I can come back to XK06 and UNflag this same vendor for deletion? How would it affect the open items/POs...etc?
- THAT'S WHY THE MESSAGE IS AN WARNING AND NOT AN ERROR. (My Opinion)
Does basis has to do some sort of execution in order to actually delete the vendor master from the database? Would basis get a error when there are pending open items for vendors flagged for deletion?
- NOT RECOMMENDED. ANY DATA CAN BE DELETED THOUGH. IF YOU ARE ON ECC 5.0 OR ABOVE AND USING SE16N TO DELETE, YOU WILL NOT GET AN ERROR.
What's the advantage of using XK05 (blocking/unblocking) over XK06 (flagging/unflagging for deletion)?
- NOT SURE IF THERE IS ANY ADVANTAGE.

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

When downloading iTunes onto a new computer, is there any way to automatically import old music files? Last time I got a new computer I didn't have to use an external drive to update my music library.

When downloading iTunes onto a new computer, is there any way to automatically important songs from your previous computer? I recently cracked the screen on my computer and cannot access any files. Last time I got a new computer my iTunes media files automatically appeared in my iTunes when I downloaded it, and I did not have to use my external drive. Is this still possible?

If your backup copy of the old computer was not stolen, then use it to put everything back.

PO created instead posting block set & vendor not extended to company code!

Dear friends,
I have a vendor created for a purchasing organisation in a company code. there are two problems that i am facing.
1) I have blocked a particular vendor completely. Even then system is allowing to create the PO using this vendor.
2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
There is a service PR specifying this vendor as desired vendor & the vendor is ticked for auto PO. Could this be a problem? but i think even then it should not allow to create PO that too for a different company code.
Thanks & Regards
Tasleem Arif

1) I have blocked a particular vendor completely. Even then system is allowing to create the PO using this vendor.
Answer: While creation Purchase order, purchase orgnization mandatory for vendor, if vendor blocked at company code level means system will not check Company code at the time of PO creation. here in PO creation use of company code is to recognise Currency of the company code.
2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
Answer: While creation of Purchase order, Comapny code is used for only currency recognisation , system will not check vendor is created for comapny code or not? but vendor should at Purchase org level.
If vendor is not defined at company code , then it will give an error at the time of invoice only. not at PO level.
At PO level Purchase orgnisation is very important
Regards
Mahesh Naik.

Automatically Block old vendors or not in use from 24 months

Similar Messages

Maybe you are looking for