Automatically changing the scale

hi need help , i have done a graph where the Y scale index0 and Y scale index1 is using the same range of data wen plotiing.
wen user run the vi..let say i change the Yscale in index0 how to change the Y scale index 1 automatically?
thk u

Hi jeyanthi,
resize the property node and select increment.
Mike
Attachments:
YScale_LV80.vi ‏16 KB

Similar Messages

Can you change the scale of brush resizing?

Hi there,
When changing brush size in CS6, I've noticed that it is has granular resolution from 0 pixels up to around 500pixels, incrementing in size very slowly. However, above 500 pixels it increases in size very rapidly, jumping to 800, 1200, 1500 and then into the 2000s.
As most of the photos that I work on have a high pixel count I find that my ideal brush size is between 400 and 1000, occasionally I use it at around 100 pixels, and occasionally at 2500.
Is there any way of changing the scale of the brush size so that it allows greater sensitivity in the 400 to 1000 range?
Cheers!
Andrew.

Thanks for pointing out that useful way of changing the brush size. Unfortunately I think it goes too far the other way ie. it changes size too slowly . Instead, the suggestion from conroy (see below) works a lot better as it alters the size in increments of 10.
Thankyou very much though!
Andrew.

Is it possible to change the scale of graph in webi ?

Hi All,
How to change the scale of graph in the web intelligence report.
Thanks in advance,
Ravi

1. Set intervals on Y-axis values of the Webi report Charts from the Webi Chart Properties
2. Set the Interval of 500 with Y-axis value range 0 2000,such that the value should look like,0,500,1000,1500,2000
Reproducing the Issue
1. Create a Webi report from e-fashion with objects Year and Sales Revenue.
2. Run the Webi report>Turn to Column Chart.
3. Go to Chart properties>Y Axis>Scale
4.Here there are 2 options.
5. Min value, Max value however the major unit option is not available like one we have in Crystal Reports and Deski
Environment Details:
1. BOXIR2, BOXI3.0
Cause
This is a limitation in Webi report.
Resolution
Enhancement_Request ADAPT01202508 for this issue has been raised however there is no specific timeline as of now defined about which major release this feature will be included in.
Regards,
Sarbhjeet Kaur

In Blackberry Z 10 "HUB MANAGEMENTS", automatically changes the items that are included in my main View of the Hub Managements.

In Blackberry Z 10 “HUB MANAGEMENTS”, automatically changes the items that are included in my main View of the Hub Managements.
I really don’t know how it happens, “Off or On” thing, without knowing me. When any Email hits to my device and not shows in my “HUB MANAGEMENTS”, at that point of time I come to know, it’s Off again.
Then whole process again, I go in “HUB MANAGEMENTS” and switch it on again and again.
I need Blackberry Z10 OS developers focus on this issue…

I can confirm this behaviour and it defeats the purpose of having a hub.
Could a BBTA confirm that this has been filed or even solved internally?
Olivier - interfaSys ltd
Developing for BlackBerry 10 devices using the Sencha Touch framework.

Why does iCal automatically change the date of the entry i am making to the day before??

why does iCal automatically change the date of the entry i am making to the day before??
for example, when i am attempting to make a 'all-day' appointment on october 2nd 2011, it automatically shifts it to october 1st.
but if i am doing a timed appointment for only a few hours, it will allow me to put it on that day.
i am trying to put in travel dates so any help on how to fix this, would be greatly appreciated.

alsdman,
Quit iCal, and try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. Since that Library is now hidden, you have to use the Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart and check iCal for functionality.
Also go to System Preferences...>Language & Text>Formats>Region: and set/re-set the appropriate "Region."

How can I change the scale of a dimensionline?

I want to change the scale of a dimensionline? Now is it 1:1. How can I change this in Acrobat standard 9?
Thanks

paulkreuzer wrote:
Ok now I can change the tempo, but when I do I change all loops at once. What I want is to change the tempi of all loops seperately, how do I do that?
You could mess around a little bit with "Flex Edit" (go to the GB help menu and search for flex edit to learn how) and see if that helps, but as Hangtime said, GB doesn't really support that... yet.
One application that might help is Amazing Slow Downer. You could use it to speed up or slow down material before bringing it into GB:
http://www.ronimusic.com/

Can Markers (or anything else) automatically change the patch?

I've been looking all over to try and figure out how to have MainStage automatically change to the next patch when a new Marker comes up on the backing track through PlayBack.
Basically, when i'm playing to a backing track, i sometimes play the pads and keys on my Akai MPK49, and when a new section comes up and i need need to change my synth sound, i don;t physically have enough hands to change to the next patch. I've read a load guides, but using the AIC driver in Logic seems far too complicated and I'm getting a bit out of my depth.
The whole point of me using markers is to identify different sections with different instruments, but I have to change between them manually anyway?
Is there a way to have the Marker automatically change the patch? The only other way i can see of getting round this live is having a midi footswitch to automatically cycle through the patches, which means Markers are of no use to me in my 'Perform' view really.
Any help would be amazing!

Hi
Currently, there is no 'super easy' way to have MS change patches automatically, and definately NOT directly from Playback markers.
It may be possible to make use of the MIDI file 'send' capability per patch or set, routing out and back in to MS, but frankly, NOT a great workaround.
CCT

Financial Reporting 9.3.1 automatically change the height of the row

How can I make the reports generator automatically change the height of the row if the text does not fit into the cell? I tried different PDF generators (AFPL Ghostscript 8.51, Adobe Acrobat Distiller 6.0) but result was the same: http://sql.ru/forum/actualfile.aspx?id=6396177

Hi,
In HFR if you are not allowing expansion on the row or column, it wont expand itself according text length.
So you need to anticipate the row hight and width according to your need. You can define this in the property sheet.
Thanks,
aly

Why does Itunes automatically change the genre of my songs?

Why does Itunes automatically change the genre of my songs? I have assigned specifit genres but they're constantly changed without me doing it. ITs annoying. Does anyone know how i can stop this?

welcome to the discussions
you may find that WMP is doing this for you.
There is a setting is WMP that means that it checks the info held in the file (and shown by itunes) against that held at Gracenote and 'updates' the info where there is any disagreement. On my copy its under the 'media library' tab.
Turn this off if its on.

How can ID automatically change the business system while importing?

Hi gurus,
There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+).
You know we have to create the scenarios manually in Integration Directory since the business system is different.
The question is as below (BTW:We are using local SLD for dev,qas,prd separately):
If we don't use transport system, and only use export and import functionality, and create business system group, can we make the ID automatically change the name of business system while importing?

Hi Xinjiang,
You can follow below method.
In Quality system transport targets will be DEV(Dev pi system) ---> QEA(Quality PI system)
In Production system transport targets will be DEV(Dev pi system) ---> PEA(Production PI system)
This will ensure that you does not need to create separate request in Quality system. You can use the same request created in Dev to transport to production system. This will reduce your efforts of transportation. This is the same type of approach that is followed in ECC system as well or next solution is creating transport target in each sld system as you mentioned below,
we have three local SLD, so we need to create TS and BS for PI DEV in SLD QAS, and create TS and BS for PI QAS in SLD PRD,
Following link will help you for defining transport target.
http://help.sap.com/saphelp_nwpi71/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm

When I try to File Save As on an .FLV movie, Firefox automatically changes the filetype to .mp4 while Chrome for instance retains the .FLV file type. I wanted to see why this is and how it can be fixed to work similarly to Chrome. Thanks.

When I try to File > Save As on an .FLV movie, Firefox automatically changes the filetype to .mp4 while Chrome for instance retains the .FLV file type. I wanted to see why this is and how it can be fixed to work similarly to Chrome. Thanks.

If that file is an FLV file then Firefox should save it as such and not change the file extension.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.org/kb/Managing+file+types

Address Book automatically changes the "Me" card to somebody else's vcard

We are using 10.6 server to provide LDAP and Address Book services, lately we've notice that Address Book automatically changes the "Me" card to somebody else's vcard which causes iChat and other apps to show the wrong user name.
Is this something that might be caused by an issue in LDAP? I created a record in LDAP which we use as a common account that can be accessed via CardDAV and everybody "shares" this address book (our version of a GAL).

No solution for you... only a half hearted "me too"
https://discussions.apple.com/message/17910812#17910812

Automatically change the password and block user

Hi experts,
I have a strange problem, I have start the part java, but, when takes some time, AUTOMATICALLY change the password J2EE_ADMIN and SAPJSF and block the user SAPJSF, so, it doesn´t work the portal and i have to change the password and unlock the SAPJSF, why?
Thanks in advance,
Regards,

Hi Victor,
you may create another communication user as a copy of SAPJSF but having a different name. Use only the newly created user and block SAPJSF. The application that changes his password will lock an exception somewhere - either on ABAP side or on J2EE side.
Cheers,
Anja

Prevent cursor from changing the scale

There seems to be a difference in how the cursor affects the scales on XY-plots in LabVIEW 8.5 vs. 7.1.1: if a cursor is snapped to a plot and you move the cursor to a point that is outside the current scale it will change the Y scale. In my case the plot values go up and down all the time and off scale...but I want to be able to move the cursor sideways without any change on the scale.
One way to solve it is to turn off the cursor scrolling, however the problem then is that I really want to be able to scroll sideways with the cursors, I just do not want the cursors to automatically scroll while they track the plot they are snapped to. This was possible in 7.1.1 - even though you had cursor scrolling on the Y scale would not change like this unless you grabbed the cursor point yourself and dragged it along the Y scale. The way it works in LV 8.5 makes horisontal scrolling a nightmare because LV automatically starts adjusting the Y scale as well.
Now there has been a few changes to the cursor and plot properties since 7.1.1 so perhaps it is possible to get back the behaviour from 7.1.1 (i.e. scrolling ON - but with no automatic scrolling along the Y axis as you scroll along X) ?
Ideally in this case I would prevent scrolling along the Y axis alltogether (not even manually by dragging the cursor vertically), but allow it along the X axis...that feature is probably one for the wish list though...(?).
MTO

Hi Wiebe,
The change in behaviour is there, no doubt about that. It's not the easiest thing to recreate though (same plot and cursor and scale settings, a suitable plot, same cursor movement etc.), and to get around it is simple enough, but it is always annoying (and risky) when the default behaviour is changed...
I did not use the scale change, but made my own scrolling function based on the cursor move event. I've turned off the cursor scrolling option to avoid the Y-rescaling, and change the X-scale range if a cursor is moved off scale.
MTO

Changing the scale of a eprint job

Is it possible to change the setting for the scale of an eprint job? I need to print something to be 110% to enlarge it for our clients. Thank you.

Hi there, if you are printing by sending an email attachment to the printers email address its not possible to edit the print settings. If you are printing via the ePrint mobile print app from a smartphone or tablet then you do have the option of adjusting print settings but scaling is not one of them.
Sorry about that.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Automatically changing the scale

Similar Messages

Maybe you are looking for