Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:     
Released on:     07.07.2000  22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Similar Messages

  • Re: Creation of storage location for halb which was not assigned primarily

    Creation of storage location for halb, every thing processed with raw materials for production orders reg  fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

    Hi Vachanala,
    Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
    If the material masters are not extended you can't book those materials to that SL.
    BR
    Csaba
    <b>material master</b>
    http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
    <b>automatic creation of storage data</b>
    http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

  • Block Storage Location for Material Movement

    Dear MM Gurus,
    pl let us know how to block storage location for a material in Plant.
    Requirement is transfer posting (MIGO)  should not allow by using 311 mov type in sloc, error message to receive.
    example ;
    material ; 5000
    sloc ; 0001
    sloc ; 0002
    migo-transfer posting should not happen by using 311
    5000
    0001 - to 0002
    we want to block sloc-0002, how to block sloc, pl help if any solution available.
    thanx in advance
    regards
    srihari

    Hi,
    You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object  M_MSEG_LGO    can be worked to remove the movement type or storage loaction .
    Dhruba

  • Automatic creation of Storage Location data with GR to Project stock (Q)

    Hello,
    during "normal" Plant stock GR (mvmt type 101) for a material, the Storage Location data gets automatically created, but this doesn't happen for Project stock (Q) material receipts.
    Is there a way to influence this either through customizing (of mvmt type?) or through an exit/enhancement/BadI?
    Thanks for the tips, br
    LK

    369468 - Storage location segment (MARD) in the case of special stock
    The special stocks sales order stock. and project stock. are not managed in a material/plant storage location segment (MARD). The existence of the MARD segment is thus irrelevant to a goods movement. Neither the checking nor the creation of the MARD segment is desirable with regard to performance and physical inventory aspects in particular. For this reason, this MARD segment is not read, checked or created automatically in the course of goods movements. We regard this as being in the best interests of our customers.

  • BLock  Storage Location for Material

    Hi experts,
    Some Unwanted storage location exists for some materials .  I want to to block them for transfer posting .  I tried to do it thru MM06.  It is only giving warning msg but not an  error msg.
    Please suggest.
    Regards,
    ( Rajneesh Gulati )

    Dear,
    Please Set storage location level deletion flag in material master.
    Than GO,
    SPRO -> Materials Management -> Inventory Management and Physical Inventory -> Define Attributes of System Messages.
    Click on Settings for System Messages.
    Change Status W to E for Message Number M7 127 - Material & & & flagged for deletion.
    Than try to make material document.
    You can't do it.
    Regards,
    Mahesh Wagh.

  • Error:storage location for material's valuation type does not exit

    create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

    Hi Yan,
    If no previous goods movements have been posted yet for the combination  of the relevant material, plant, storage location and valuation type  the physical inventory cannot be done.                                                                               
    The table MCHB is used for both batch managed materials and materials  with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.              
    When you create a valuation type in the material master, only the table  MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.                
    This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.                                                                               
    You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.                                                                               
    If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:                                                                               
    - make a goods receipt (561)==> then the stock segment will be created           
    - make the reversal of the goods receipt                                         
    - make the inventory.      
    Hope this can help
    Regards,
    Mauro

  • Storage location for material to be made mendatory and default

    Hi,
    We are generating PR of material through CJ2N. I want to make storage location filed in generatl data tab of material, mandatory as well defalut value depending upon the project. If defalult value can not come depending upon project defination then i want to make default value as blank but mandatory
    How can i do this?
    Regards,
    Kalpesh

    Dear Kalpesh,
    In standard SAP the storage location will be an input field and no default values will get populated when you attach a material component in the activities as the material master will be extended to multiple storage locations.But in your case if is coming as default either some screen variant must exist or some parameter Id would have been maintained.Check Which & How the storage location is getting defaulted from your MM consultant.

  • Get storage location for material

    Hello Abapers,
    I have a specific requirement,
    I need to find out the current stock of a material provided and detaisl i need are quantity, wareshouse number, plant, storage type, storage type name,
    i m getting most of data from MARD, wat I am lacking is storage type and storage type name, can any one please help?
    thanks,
    Hitesh

    Hi
    See the tables
    <b>MSTA</b> and MVGT
    Pass MATNR and LGORT fields to MSTA and take the LGTYP field from MSTA
    and take its description from <b>T301T</b> table
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Auto Creation of Storage Location at the time of Goods receipt

    Dear All
    Please tell me how can i create storage location automatically at the time of Goods receipt.
    i already made the configuration in OMJ8 for movement type and required plant
    still, at the time of creating PO its not getting created..
    Please advice
    Narendra C.

    Hello Narendra,
    If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
    Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM

  • MIGO: determination of storage location for empties

    Hello SD experts,
    Case: plant A delivers materials to plant B (interplant delivery). This delivery is posted GR through TC MIGO (based on delivery). Now, the issue is that SAP is not able to automatically determine the storage location for the empties (crates and crate containers). Can ayone tell me how we can let SAP do this automatically?
    Currently, we use WM for all finished products (storage location 0100). Empties are however not WM managed (storage location 0110). Empties are calculated and added in the delivery (user exit MV50AFZ1); not in the sales order.
    All replies are highly appreciated!
    Thanks and kind regards,
    Wander

    Hi,
    - If storage location for picking is not specified in the order item, the system determines the storage location when it creates the outbound delivery and copies it into the delivery item. Otherwise, the storage location entered in the order item is used in the outbound delivery.
    - The system determines the picking location based on a rule defined in the delivery type. The following rules are shipped in the standard system:
    - MALA: The picking location is determined based on the shipping point, the delivering plant, and the storage condition for the material as defined in the material master.
    - RETA and MARE: These rules are mainly used in trade scenarios.
    - You can also use the customer exit in SAP enhancement V02V0002 to implement storage location determination.
    - The picking location search is activated for each delivery item category.
    <b>Reward if helpful.</b>

  • Open a storage location for a material

    Hi,
    how can I open a storage location for a material ?
    Is also possible to do it automatically ?
    Regards

    A storage location is customizing, this is in general open to take any material.
    depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
    if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

  • Determine Storage Location of material automatically while doing UD .

    Hi ASAP,
    Hope you must be doing great.
    I wanted to determine storage location of material automatically while doing UD .
    Storage location is Determining automatically for movt. type 101/321.
    But for Movt. type 103/105, System is not able to determine Storage Location of material automatically while doing UD.
    Dear Expert I have done the required config. for plant & Movement type respectively to determine Storage location automatically.
    If I require any hard coding to determine Storage Location automatically while doing UD,plz let me know.
    Thanks & Regards
    Manoj Singh

    Hi Gobi.....
    I believe that Stock determination strategy will be use only for stock removal, plz correct me if I am wrong
    Now coming to our cases.
    As per config. done for Plant & Movt. type 103/105, System is able to determine SL at PO automatically.
    When I am using 101 to Post GR, In MIGO System is populating SL field automatically and same Storage location is being carrying on to UD Storage location.
    But for 103 case is different, though 103 is conditional movt. type ie by default you have assume that mat. is faulty.
    In this case , while doing UD SL has to determine automatically,
    Now plz suggest me what to do,
    I have cross verified from our other client, there manually, SL has to be populated, but over here client want that SL has to determine automatically.
    plz help me.
    Regards
    Manoj

  • Block Storage location for particular material

    Hi,
    We gave defined storage location for finished product as follows>
    1050 - 2-8°
    1040 - RT
    When I have created one material, wrongly i have created it in 1050 instead of 1040.
    Then i have extend that material to 1040. Now that material is showing both storage locations.
    Is it possible to block storage location 1050 for this material only?
    Because of both SLOC thre are chaces of wrong receipt in 1050.
    Pl. help me to solve this problem.
    Gkude

    Dear Mr. Kunal,
    I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
    Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
    Hope for your reply.
    Gkude

  • Any Idoc for "storage location for a material" ?

    Hi Everyone,
    Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
    BDC is also an option but IDoc should be a better choice.
    Thanks & Regards,
    Ankur

    Hi Ankur,
    Storage location view of a material can be created with
    MATMAS message type ( Segment E1MARDM )  . You can also use program RMDATIND with relevant data to add the storage location view.
    Cheers.

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Maybe you are looking for